Last Dunning Data not generated for customer account
Hi Gurus,
I have run the Dunning for a customer, it was successfully data generated to the customer account and able to see dunning history until 1st and 2nd runs, but 3rd and final dunned but no data generated for the particular customer.
In this time i find few other line items are additioned to the previous line item.
The 3rd dunning days are already exceeded the grace days, but not data generated because of additional items are not eligible for dun this time they have good enough time as grace days.
So this is caused, and no data generated to the for the respective line item which has to get the data for it's 3rd dun.
When i run for some future time 3rd dunning was successfully got and data updated, for additional items also got dunned 1st reminder this time because they are also eligible this time..
In my dunning procedure i have selected for always dun for all intervals and print line items for last dun.
Your inputs are highly appreciated.
Thanks in advance, points are avails.
Thanks,
Vyas
Hi
Any Updates on this ..
Thanks in advance,
Vyas
Similar Messages
-
Excise Accounting document not generated for Imported Asset GR
Dear all,
Excise accounting document is not generated for imported asset goods receipt(MIGO)
but "C" Register part 2 no. is generated,usual accounting document is generated for GR,
Asset is Dr to GR/IR
Process is
1. Create asset purchase order with acct. assignment "A",
2. Customs miro based on p.o.
3. Do GR with excise
4. Post invoice for orginal vendor.
What will be cause of this problem ?
How to solve this issue ?The above issue may be due to Accout assignmnet -A . Check your accout assignment in spro -mm-purchasing -accout assignment - Asset A - GR Non valuated has Ticked on . If it is ticked on - No Fi entry will happen at the Time of GR .
The reason being , if an FI entry happen for the first time , asset is capitalised . To avoid this GR is made in ur config as this .
rewdzzzz is full if correct
Edited by: manu m on Apr 24, 2010 11:11 AM -
HOW TO MIGRATE DUNNING LEVEL & LAST DUNNED DATE FOR ALL OPEN LINE ITEMS
Hi,
We need to upload dunning level & last dunned date for all open items (to be done separately i.e. after all open items migrated) which is different for each and every line item so if we use mass upload (fbl5n) we have to do for each and every open line item which is not feasible as open line items in thousands..I tried LSMW also,problem is that for Batch input recording we need to run one complete cycle in sm30 but there is no maintenance dialog for BSEG & BSID table.. Please share your valuable Inputs how we can go ahead..
Thanks in advanceHi Mark,
Thanks for your reply.
It is complete a Zcopy of a standard one, but we are facing one or two records are not updating correctly out of hundreds of customers in the worklist. -
Accounting document not generating for excise invoice.
Dear all ,
my issue is
accounting document not generating for excise invoice
we are creating accounting document in J1iin
with refferance to billing document but the accounting docuemnt is not generating
the accounting document for billing document is generated
so why the accounting document for excise invoice is not genrating its showing the correct amount in BED ,cee and HE Secc.
please help
regards
SubratIMG -> In Logistics u2013 General -> Tax on Goods Movement -> India -> Account Determination -> Specify Excise Accounts per Excise Transaction
Check if the following is maintained or not
DLFC CR Credit PLAAED PLA AED account
DLFC CR Credit PLAAT1 PLA AT1 Account
DLFC CR Credit PLABED PLA BED account
DLFC CR Credit PLACESS PLA cess account
DLFC CR Credit PLAECS PLA ECS Account
DLFC CR Credit PLASED PLA SED account
DLFC CR Credit RG23AED RG 23 AED account
DLFC CR Credit RG23AT1 RG 23 AT1 Account
DLFC CR Credit RG23BED RG 23 BED account
DLFC CR Credit RG23ECS RG 23 ECS Account
DLFC CR Credit RG23SED RG 23 SED account
DLFC DR Debit MSUSP CENVAT suspense account
Also IMG -> In Logistics u2013 General -> Tax on Goods Movement -> India -> Account Determination -> Specify G/L Accounts per Excise Transaction
Check if for all Excise group u2013 DLFC u2013 Company Code combination GLs are maintained or not (especially in production client) -
Accounting document not generating for excise invoice-please help
Dear all ,
my issue is
accounting document not generating for excise invoice
we are creating accounting document in J1iin
with refferance to billing document but the accounting docuemnt is not generating
the accounting document for billing document is generated
so why the accounting document for excise invoice is not genrating its showing the correct amount in BED ,cee and HE Secc.
please helpDear G. Lakshmipathi,
As uknow i am getting problem when i am creating the debit memo
so is there any specific ETT for debit memo is there .because we are not maintaining delivery type to billing type here in CIN setting
so its not goods removal through sales . so what will be transaction type for this.
how to check the error that why the accounting document is not generated as no error log is also comming.
so please help me in this regards.
Thanks with Regards
Subrat -
Warning: untrusted X11 forwarding setup failed: xauth key data not generate
Upon connecting to a RedHat Enterprise Linux server via ssh -X I get the following:
Warning: untrusted X11 forwarding setup failed: xauth key data not generated
Warning: No xauth data; using fake authentication data for X11 forwarding.
I have previously (as in last week, ending 11/1/2008) been able to use x11 forwarding from the machine I'm trying to connect to. This problem also occurs with other servers, meaning it must be a problem with my local machine. Any suggestions are welcome.I get that if I use
ssh -Y ...
but NOT with -X.
Do you have a $HOME/.ssh/config or /etc/ssh_config file that is specifying ForwardX11Trusted?
Mostly I ignore the message when I get it as, my X11 forwarding works OK, AND I'm in an environment where my fellow employees could do much naster things to me (and get fired for it), than spoofing my X11 sessions. -
TimeStream Error (not generated for year 1970)
Dear Experts ,
I am facing a problem with Time Stream .... When i try to open a Planning Book i am receiving the following message:
Timestream (TS ZBRSNP_ZF ) not generated for year 1970
Message no. T9507
Diagnosis
The date is outside the periods maintained in the factory or planning calendar (timestreams).
System Response
The error causes a system crash.
Procedure
a) Regenerate the timestream as far in the future (or possibly the past) as possible
or
b) Use the report ZZTSTRDELE to delete the runtime objects of the timestreams, if changes have been made to Customizing settings. For more information, see SAP Note 169885.
It starts happen after i included Initial Column at Planning Book .... The Factory Calendar that i am using starts on 2006 and ends on 2020 .... The timestream i am using is looking for 2 years in the past and 9 years in the future.
*The message above says that it is necessary to execute report ZZTSTRDELE but i am having some problems while donwloading SAP note. It is possible do delete it manually? exist another way to fix this issue?
Please i hope someone can help me as soon as possible ....
My Best Regards
Mauricio FilhoHi Sunitha,
We have same type of problem now, could you plz adivise me how to fix this error and where we need to configure to overcome this error.
Thanks in advance
Sreeenivasu -
Hi Experts,
I am trying to build a PowerShell Script to get the details Like Scope,Last Deployed date and Name for a Solution Deployed in the Farm.
Can anyone advise on this please.
RegardsGet-SPSolution|Select Name,Scope,LastOperationResult,LastOperationEndTime|Export-CSV "SPInstalledSolutions.csv" -NoTypeInformation
SPSolution properties
Get-SPSolution
This post is my own opinion and does not necessarily reflect the opinion or view of Slalom. -
What should i take for customer account group
wat is the best to customize customer account group
i m thginking to creat one exportcustomer and other one is domestic
or else i ll make one one as sold to party
plz help<i><u><b>Customer Master</b></u></i>
<u><b>Account Group</b></u>
<b>Maintain Number Range for Account Group</b>
Use
The purpose of this activity is to control number range of Account Group.
Procedure
Access the activity using one of the following navigation options:
IMG --> Financial Accounting (New)  Accounts Receivable and Accounts Payable  Customer Accounts  Master Data  Preparations for Creating Customer Master Data  Create Number Ranges for Customer Accounts  Select the Icon to maintain Number Range
Transaction Code SPRO
Data to be maintained:
No | From | To | Current No | Ext (Tick in Check Box)
01 | 0000000001 | 0000099999 | 0 | No
02 | 0000100000 | 0000299999 | 0 | No
XX | A | ZZZZZZZZZZ | Yes
<b>Assign Number Range to Account Group</b>
Use
The purpose of this activity is to maintain number range of Account Group.
Procedure
Access the activity using one of the following navigation options:
IMG --> Financial Accounting (New)  Accounts Receivable and Accounts Payable  Customer Accounts  Master Data  Preparations for Creating Customer Master Data  Assign Number Ranges to Customer Account Groups
Transaction Code SPRO
Data to be maintained:
Group | Name | Number Range
0001 | Sold-to party | XX
0002 | Goods recipient | XX
0003 | Payer | XX
0004 | Bill-to party | XX
<b>Define Account Groups with Screen Layout (Customers)</b>
Use
In this step, you determine the account group of the customer.
Procedure
Access the activity using one of the following navigation options:
IMG --> Financial Accounting (New)  Accounts Receivable and Accounts Payable  Customer Accounts  Master Data  Preparations for Creating Customer Master Data  Define Account Groups with Screen Layout (Customers)
Transaction Code SPRO
The groups indicated below are a few examples. There are many groups in Standard SAP & if we require additional Group, it can be copied from appropriate group & maintained.
Group | Name
0001 | Sold-to party
0002 | Goods recipient
0003 | Payer
0004 | Bill-to party
0005 | Prospective customer
0006 | Competitor
Select Sold-to-party  go to Details  Double Click on General data / Company code data / Sales data. It will take to next screen which details Tab Pages of General data / Company code data / Sales data. Double Click on Tab Page for example: Address, Control, Marketing & so on. Here you can maintain whether the field is to be Suppress, Req. Entry, Opt. entry or Display
Regards,
Rajesh Banka
Reward points if helpful -
Update Locations for Customer accounts
Hi all,
I am trying to use TCA update_location API to update location information for customer accounts. I know that the tables involved here are the following:
HZ_PARTIES
HZ_LOCATIONS
HZ_PARTY_SITES
HZ_CUST_ACCOUNTS
I'm trying to find a way where I can get a list of location records from HZ_LOCATIONS that will apply only to customer accounts in HZ_CUST_ACCOUNTS. Here is the query I've come up with. I'm not sure if this will do the trick so I'm hoping someone can confirm for me.
Again, I'm trying to update location information for records that only have an associated customer account...
SELECT DISTINCT
A.LOCATION_ID,
A.ADDRESS1,
A.ADDRESS2,
A.CITY,
A.POSTAL_CODE,
A.STATE,
A.COUNTRY,
A.COUNTY
FROM HZ_LOCATIONS A,
HZ_PARTY_SITES B,
HZ_PARTIES C,
HZ_CUST_ACCOUNTS D
WHERE
A.LOCATION_ID = B.LOCATION_ID AND
B.PARTY_ID = C.PARTY_ID AND
C.PARTY_ID = D.PARTY_ID;If you are looking to update locations for all customers who have customer accounts then you can use this:
SELECT DISTINCT
A.LOCATION_ID,
A.ADDRESS1,
A.ADDRESS2,
A.CITY,
A.POSTAL_CODE,
A.STATE,
A.COUNTRY,
A.COUNTY
FROM HZ_LOCATIONS A,
HZ_PARTY_SITES B,
HZ_PARTIES C,
HZ_CUST_ACCOUNTS D,
hz_cust_acct_sites e
WHERE
A.LOCATION_ID = B.LOCATION_ID AND
B.PARTY_ID = C.PARTY_ID AND
C.PARTY_ID = D.PARTY_ID
and d.cust_account_id=e.cust_account_id
and e.party_site_id=b.party_site_id;
If they don't then you can eliminate the cust account tables as a party can have address and location without having account.
Thanks
Nagamohan -
J1INQEFILE is not generating for the month of March 2011
Hi,
J1INQEFILE is not generating for the month of March 2011, we have executed Qefile from 01/01/2011 to 31/03/2011 then file is generating but March 2011 data is not available.
Problem is challans were updated in the month of April 2011 for March 2011 documents, When we executed J1INMIS report with Bank Challan status, documents are coming in the report.
As per our understanding Challan numbers and Bank Challan update should be done in the month of March 2011 but challans and Bank challans were updated in the April 2011.
Please suggest.
Thanks,
RatnamHi Vara,
Please check following thing in the system.
1) When the Challan is created ( March month or April 2011)
2) When the Bank challn updated for the challans
3) If the Challan created in the April and generating returns for the month of March 2011.
4) Check in J1INMIS report for the month posting date 01.03.2011 to 31.03.2011, if the external Challan number is appearing or not for the documents.
5) If the Challan created in the April ask user to revere through J1INREV, and make Challan in the month of march 2011.
Problem will solve.
Thanks,
Ratnam. -
Credit memo not generated for RMA Receipt
Hi,
i created RMA receipt but for this credit memo not generated in AR, Manually i have run the Workflow Background Process & Receiving transaction processor concurrent also. even though CM not generated(In AR Interface lines table also data is not available)..or else is there any possibility for cancel or return the RMA Receipt quantity?
regards
Balaji
Edited by: user9122706 on May 15, 2012 9:22 PM
Edited by: user9122706 on May 15, 2012 9:51 PMDear Balaji,
Credit memo not generated for RMA Receipt,Can u put manual credit in AR
Regards,
Shineee.. -
Pur req not generated for MRP element Planned order in stock reqmnts list
Hi SAP Gurus,
I have a problem where in MD04, pur req is not generated for the MRP element Planned order for a future date (about two months from now). Is there a specific reason? why is it not being generated? The MRP type is PD. The procurement type is F - external procurement. Can anybody please help me on this?
Thanks
AnushaAnusha,
?? Not sure I understand the question. Are you saying MRP is creating planned orders instead of purchase reqs? Or, are you saying that no proposals at all are being created outside of two months? Or, are you saying that the system is creating purchase reqs inside of two months, and planned orders outside of two months?
Regardless, these problems are probably related to your MRP settings. Try the following settings:
NEUPL Regenerative planning
1 Purchase requisitions
3 Schedule lines
1 MRP list
3 Delete and recreate planning data
2 Lead time scheduling and capacity planning
on your MDBT screen.
Regards,
DB49 -
Reverse Engineering is not working for custom
hi odi guru's
i installled Hyperion 11.1.2.2 and ODI 11.1.1 . while doing reverse engineering is not working for custom purpose.
Iam working with Hyperion Financial management with odi. created dataserver and physical schema and logical schema
and imported RKM HYperion Financial Management Knowledge module.
is it required for hyperion latest patches to connect with odi. Please let me know . urgent?
Thanks in adavncehi
is it required for hyperion patches to connect with odi?
iam getting following error.
ODI-1217: Session HFM_Model (5051) fails with return code 7000.
ODI-1226: Step HFM_Model fails after 1 attempt(s).
ODI-1229: An error occurred while performing a Reverse operation on model code HFM_MODEL.
Caused By: org.apache.bsf.BSFException: exception from Jython:
Traceback (most recent call last):
File "<string>", line 38, in <module>
at com.hyperion.odi.hfm.ODIHFMAppConnection.<init>(ODIHFMAppConnection.java:58)
at com.hyperion.odi.hfm.ODIHFMAppReverser.connect(ODIHFMAppReverser.java:27)
at com.hyperion.odi.common.ODIModelImporter.importModels(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
com.hyperion.odi.common.ODIHAppException: com.hyperion.odi.common.ODIHAppException: Error occurred while loading driver.
at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:322)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2472)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:47)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2913)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2625)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:558)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:464)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2093)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:366)
at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:300)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:292)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:855)
at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)
at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
at java.lang.Thread.run(Thread.java:662)
Caused by: Traceback (most recent call last):
File "<string>", line 38, in <module>
at com.hyperion.odi.hfm.ODIHFMAppConnection.<init>(ODIHFMAppConnection.java:58)
at com.hyperion.odi.hfm.ODIHFMAppReverser.connect(ODIHFMAppReverser.java:27)
at com.hyperion.odi.common.ODIModelImporter.importModels(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
com.hyperion.odi.common.ODIHAppException: com.hyperion.odi.common.ODIHAppException: Error occurred while loading driver.
at org.python.core.PyException.fillInStackTrace(PyException.java:70)
at java.lang.Throwable.<init>(Throwable.java:181)
at java.lang.Exception.<init>(Exception.java:29)
at java.lang.RuntimeException.<init>(RuntimeException.java:32)
at org.python.core.PyException.<init>(PyException.java:46)
at org.python.core.PyException.<init>(PyException.java:43)
at org.python.core.Py.JavaError(Py.java:455)
at org.python.core.Py.JavaError(Py.java:448)
at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java:177)
at org.python.core.PyObject.__call__(PyObject.java:355)
at org.python.core.PyMethod.__call__(PyMethod.java:215)
at org.python.core.PyMethod.instancemethod___call__(PyMethod.java:221)
at org.python.core.PyMethod.__call__(PyMethod.java:206)
at org.python.core.PyObject.__call__(PyObject.java:381)
at org.python.core.PyObject.__call__(PyObject.java:385)
at org.python.pycode._pyx1.f$0(<string>:38)
at org.python.pycode._pyx1.call_function(<string>)
at org.python.core.PyTableCode.call(PyTableCode.java:165)
at org.python.core.PyCode.call(PyCode.java:18)
at org.python.core.Py.runCode(Py.java:1204)
at org.python.core.Py.exec(Py.java:1248)
at org.python.util.PythonInterpreter.exec(PythonInterpreter.java:172)
at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:144)
... 19 more
Caused by: com.hyperion.odi.common.ODIHAppException: Error occurred while loading driver.
at com.hyperion.odi.hfm.ODIHFMAppConnection.<init>(ODIHFMAppConnection.java:58)
at com.hyperion.odi.hfm.ODIHFMAppReverser.connect(ODIHFMAppReverser.java:27)
at com.hyperion.odi.common.ODIModelImporter.importModels(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java:175)
... 33 more
Caused by: com.hyperion.odi.hfm.wrapper.HFMException: Error occurred while loading driver.
at com.hyperion.odi.hfm.wrapper.HFMServer.<init>(HFMServer.java:29)
at com.hyperion.odi.hfm.ODIHFMAppConnection.<init>(ODIHFMAppConnection.java:51)
... 40 more
Caused by: com.hyperion.odi.hfm.wrapper.HFMException: no HFMDriver in java.library.path
at com.hyperion.odi.hfm.wrapper.HFMDriverJNI.getDriver(HFMDriverJNI.java:23)
at com.hyperion.odi.hfm.wrapper.HFMServer.<init>(HFMServer.java:26)
... 41 more
please help me , thanks in advacne -
Lines are not generated for holidays and sundays
Hi
creating a sale order shcedule lines are not generated for sunday for a particular plant .
Schedule lines are generated for subsequent monday only.
the plant calander is also correct
with regards
parthaHi
I would really double check the factory calendar ans the of the plant and sales organisation
regards,
Sidi
Maybe you are looking for
-
How do I change my apple id on my Ipad
I recently had to change my email to a new one due to a move. I have updated my apple ID to the new email address, but my IPad 2 still lists the old email address whenever I try to do a download or update to it. How do I get my IPad to switch to th
-
Windows 7 error code 0x80070017
Trying to install Windows 7 on my 2011 MacPro using Boot Camp Assistant. Using a download purchase of Windows 7 Pro burned onto a DVD. Installer runs but eventually stops on an incomplete Step 2 (Expanding files I think) with Error Code 0x80070017. P
-
I am in the middle of building my new system. I am having problems with an Areca arc-1680 IX 16 Port. Basically the card is running so slow, I have tried varios volumes from 2x hd in raid 0, to 10 raid 0, raid 30 ect. the higest i got is 170 ish mbs.
-
Add motion tween to my buttuns in flash??
hi, i'm new in flash ,i make a simple buttun by these steps 1- i prepare color photo and same in black and white 2- i import my photo to stage - convert to buttun 3- in over , down i put the black and white photo - also write text 4- when i run the
-
Dear all, I have 9i OCP Certificate and I have done 1Z0-040 Oracle Database 10g: New Features for Administrators.. , Now what should I do attain the 10g OCP certificate ?.. I understand that Hands on course requirement is not needed for this ?.. How