Last increase date updated incorrectly in HRMS 9.0

In HRMS 9.0, the LAST INCREASE DATE from PER_ORG_ASGN table gets updated incorrectly when an employee has pay rate change. what should we do. I have figured out peoplecode causing this issue. Reply me if you have any ideas

You should raise a SR onto http://metalink3.oracle.com
Nicolas.

Similar Messages

  • Last Inventory Date update in Quant

    Hi All,
    We use Cycle counting in our warehouse and it is triggered by LICC. When a count is performed through LICC, it updates the last inventory date as the last count date.
    It also happens that sometimes we count at Bin level, use LI01N and use inventory method as "CC". But after inventory, the last inventory record in the quant is updated with the current record, but the last inventory date is not updated.
    Is there a note out there to fix this issue?
    Thanks
    Jithin

    Yes i saw that, but since we are using LI01N with CC method, it should behave the same. I am not questioning what SAP does. It is how theoretically it should have been and how it is not.
    On the same note, how is LX26 and LICC different.
    You should understand that LI01N + CC and LX26 is cycle counting for storage bin whilst LICC is for quant.
    If you are not satisfied with this I cannot help you (I cannot modify SAP and I think none of simple forum members can do this...), please contact SAP AG.
    Regards,
    Csaba
    Edited by: Csaba Szommer on Apr 15, 2009 8:42 AM
    Edited by: Csaba Szommer on Apr 15, 2009 8:49 AM

  • SharePoint 2007 Site Last Modified date issue

    Hello,
    Good Morning.
    We are facing Last modified date update issue in MOSS 2007. From last 2 days, In All site content the site last modified date is displayed as 3 month ago but actually the site was last updated by more than 2 year ago.
    Could you please help on how to resolve this issue.
    Thanks in advance.
    -Tushar

    Hi,
    From your description, you think last modified date of your Moss 2007 site is wrong.
    Could you offer a screenshot about your All site content page?
    You can use the LastItemModifiedDate property of the Web object to get the last modified date of your site:
    https://social.msdn.microsoft.com/Forums/sharepoint/en-US/2c74a56b-18b6-4dc9-b368-b96dcf7be3ec/last-modified-date-and-time-in-sharepoint-site
    https://farhanfaiz.wordpress.com/2010/03/22/sharepoint-2007-last-modified-date-of-lists-document-libraries/
    Best Regards,
    Lisa Chen
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Last data update

    Hi,
    How I can find the last data update information(date and time) of multiprovider in BW?
    Kindly help on this.
    Regards
    Mukul Singhal

    Let me explain how the "last data update" works.
    If the query is based on one cube or DSO, it is the time of the last request upload.
    If the query is based on a multiprovider, like the example given ealier,
    assume there are three cubes in multiprovider : 
    Last update of cube1 is 11/17/2008
    Last update of cube2 is 11/19/2008
    Last udpate of cube3 is 11/20/2008.
    The "last data update" will be the earliest day of the "last data update"s of all partproviders, i.e.11/17/2008.
    Because the meaning of "last data update" is that, data (of all partproviders) has been already updated until this time.
    Now we assume there are three cubes like this in multiprovider :
    Last update of cube1 is 11/17/2008
    Last update of cube2 is 11/19/2008
    Cube3 is empty. It has never been loaded with any request.
    Then the "last data update" will be empty. Because until no time has all partproviders been updated. This is the design of the system.
    Regards,
    Patricia

  • How can we update the last synchronization date and time..on SUP in sccm 2012 R2

    Hi,
        Can you any one please guide me how can i update the last  synchronization date & time in SUP on SCCM2012 r2 , some how its updated as future date and when ever i try to synch the SUP with disconnected WSUS its shows in the wsyncmgr.log 
    "Wakeup for a polling cycle " and  " Wakeupby inbox drop" and "Wakeup by SCF change"  
    Thanks 
    Balaji K

    You'll probably have to call CSS on this one as this not normal by any means. The messages you noted above are completely normal but if that's all you are seeing then there's an issue.
    Have you reviewed wcm.log and wsusctrl.log?
    Jason | http://blog.configmgrftw.com | @jasonsandys

  • IPod Shuffle 2 no longer updating playlist play count and last played date

    I use my shuffle 2 in the gym.  When I'm done working out I sync and the most recently played songs are rotated off using a smart play list.  This is no longer working.  I reset the shuffle 2, I've forced sync and auto filled many times.  My latest workout it still lists all the songs I just listened to in the order I listened to them and has their last played date as many months ago.
    This seems to be affecting my other iPod too, but it is tougher to diagnose.  I signed up to iTunes Match and after several days that is still running but I noticed this problem long before iTunes Match became available in Canada.  Both my iPod Shuffle and iTunes are up to date but my music is on an older but upgraded Mac.  It has a G4 so no Lion upgrade, I just checked it is 10.5.8

    All my tracks should be MP3s or AAC.  I ripped them myselfs with iTunes.  I may have bought some songs directly off of record labels or some other online music store, but I own my music legally whether I bought it on CD or got given it by magazines or record labels.
    I went to the gym today.  I set the shuffle to random.  Some songs were synched back to iTunes but they weren't the songs I listened to, at least not all of them.  Some of them may have been the songs I listened to last workout, at least one or two of the songs updated I did listen to today.
    I listened to some other songs last night on my main Mac so it is easy to determine which songs iTunes updated this morning.
    I haven't had much time to play with Match.  It is still updating and uploading, it has 6000 songs to go.  That means in a half month of trying it has managed to find and/or upload a little over 1000 songs actually close to 2000 now.  It is something, but it isn't the service I was sold.  All my songs and playlists were supposed to be available in the cloud.  That hasn't happened and in the case of my smart playlists will never happen. 
    I'll read you link, but I wrote a blog posting how I was disappointed with the service so far.
    Thanks!

  • How to hide the Last date Update in the Excution of a report

    Dear All,
    When we execute a query in EP, the Out Result will contain the following Options
    1) Save As
    2) Open
    3) Export Excel
    4) Information
    5 ) Comments
    6) Filters
    7) Settings
    8) Last data update
    Can anyone plese tell me how to give the authorisation in BI for the above options.so that we can give restrictions for some users.
    hope everything is crear.
    Please give me the hint atleast

    You also have to test the value:
    REPORT ztest MESSAGE-ID 00.
    DATA: BEGIN OF itab OCCURS 0,
            f1 TYPE i,
            f2 TYPE i,
            f3 TYPE i,
            f4 TYPE i,
          END OF itab.
    DATA: sel_field(20),
          value TYPE i.
    DO 5 TIMES.
      itab-f1 = sy-index.
      itab-f2 = sy-index + 10.
      itab-f3 = sy-index + 20.
      itab-f4 = sy-index + 30.
      APPEND itab.
    ENDDO.
    LOOP AT itab.
      WRITE: /001 itab-f1, itab-f2, itab-f3, itab-f4.
      HIDE itab.
      CLEAR itab.
    ENDLOOP.
    AT LINE-SELECTION.
      CLEAR: sel_field,
             value.
      GET CURSOR FIELD sel_field.
      IF sy-subrc = 0.
        CASE sel_field.
          WHEN 'ITAB-F1'.
            value = itab-f1.
          WHEN 'ITAB-F2'.
            value = itab-f2.
          WHEN 'ITAB-F3'.
            value = itab-f3.
          WHEN 'ITAB-F4'.
            value = itab-f4.
        ENDCASE.
        MESSAGE s001 WITH 'Value of' sel_field 'is' value.
      ELSE.
        MESSAGE s001 WITH 'Invalid field selected'.
      ENDIF.
    Rob

  • After the last up date for Safari (Mac OS X 10.8.5 in a iMac mid 2011 21.5 inch 2.8GHz Intel Core i7) The window don't open or they are there  and only in an outline, kind of like they're behind the screen. I have also done a system update and then a syst

    After the last up date for Safari (Mac OS X 10.8.5 in a iMac mid 2011 21.5 inch 2.8GHz Intel Core i7)
    The window don't open or they are there  and only in an outline, kind of like they're behind the screen.
    I have also done a system update and then a system reinstall.
    What now? incident nr, 526941222.

    After the last up date for Safari (Mac OS X 10.8.5 in a iMac mid 2011 21.5 inch 2.8GHz Intel Core i7)
    The window don't open or they are there  and only in an outline, kind of like they're behind the screen.
    I have also done a system update and then a system reinstall.
    What now? incident nr, 526941222.

  • Last Logon date and Logon time not updating in table USR02

    Hi,
    Please help us on this. After customer successfully logged in the webshop, we are checking the table USR02 in CRM system and the Logon date and Logon time is not updated. Because of this, the customer will be locked after certain number of days. When we check it in ECC system, customer's last logon date and time is updated. Can you tell us what could be causing this? Any advise what we need to check? Thanks in advance!
    Regards,
    Mike

    Hi
    1. Please check if the USAPPLREF table in ECC has the correct mapping done between the LOGON User and the Sold-to party (Customer)
    2. Please check the validity of those user in SU01 user data.
    3. Please check the USERS data from the USERADMIN Link (if it is configured in your scenario through XCM settings for USERS)
    Hope this will help.
    Regards

  • MBAM "Enterprise Compliance Report" not updating "Last Contact" date/time for any/all systems.

    Running BitLocker/MBAM 1.0.1237.1.
    About 1 month ago, "Last Contact" date/time listed in MBAM "Enterprise Compliance Report" stopped updating (last updated 1 month ago) for all systems. However, reporting against these exact same systems individually via
    "Computer Compliance Report" shows current/correct "Last Contact" date/time (last updated today).
    Have tried http://support.microsoft.com/kb/2620269/en-us but no luck.
    Hoping someone has experienced this before, fixed, and can share insights.
    Thx,
    DCL

    You may want to look for communication errors under the MBAM node in Event Viewer.
    You may also want to review the registry settings discussed under the
    Configure Lab Computers for MBAM Evaluation section of this TechNet article:
    HKLM\Software\Policies\Microsoft\FVE\MDOPBitLockerManagement\ClientWakeupFrequency
    HKLM\Software\Policies\Microsoft\FVE\MDOPBitLockerManagement\StatusReportingFrequency
    HKLM\Software\Microsoft\MBAM\NoStartupDelay
    Specifically the StatusReportingFrequency
    key.
    Brandon
    MDOP on the Springboard Series on TechNet

  • Last Data Update in Visual Composer and Web App Designer

    Hello,
    We want to show the last data update in query result and we used 2
    differents ways to do it: throught Web Application Designer (SP 12) and
    Visual Composer (SP 10).
    In query result of Web Application Designer, the last data update came
    in GMT0 and in visual composer came ok (GMT - 3, that's our time zone).
    This value (ROLLUPTIME) is taken out of the RSMDATASTATE table and this is used in SAPLRSMDATASTATE program, that is called by Web App Designer.
    Why does the difference exist between: Web App Designer and Visual Composer for last data update?
    So, I need more information how the Visual Composer brings the correct value (in our time zone) and Web App Designer in GMT0.
    Best Regards,
    Pablo Moraes

    Hi Mario,
    Yes, i used the same user and the same query to access the information. But, how can i check the mapping from my VC user to the BI user?
    Regards,
    Pablo Moraes

  • Query on Virtual cube 0FIGL_V10 show old "Last Data Updated:" on Portal

    Hello all,
    We are using the SAP delivered virtual cube for G/L financial statements reporting. We are running these queries on Portal (BI 7.0) we are using the 0ANALYSIS_PATTERN template. Now since we are not actually loading data in this cube the template show "Last Data updated" as long time back, I am guessing when the cube was last activated or transported.
    The template and time stamp is working perfect for queries on all other cubes or Multiproviders.
    The business users are asking can we have the actual time stamp there (when actually the data was last loaded),
    Does anyone have any idea how we can do it without actually rewriting the queries on standard cube.
    Thanks in advance,

    Hi Kiran,
    Always last update data status only will see in our reports on last data updated date. It may be activation of data in cube. please check is there any option of activate data in data flow level.
    Try to create one record in remote data source  and load it again. It may be find the latest status.
    Thanks,
    Chandra

  • Update Last Changed Date when attaching a Document to Opportunity/Activity

    Hi my CRM peers,
    we have the requirement to update the last changed date of the one order object (Activity, Lead, Opportunity) when a user attaches a document to the object. Has anyone solved this requirement?
    Best regards
    Gregor

    Hi Stephen,
    what do you think about using the SEARCH_DOCUMENTS method of CL_CRM_DOCUMENTS to get the documents uploaded during the last day. I fill the table IT_QUERY_PROP is filled to search for the Documents Created starting yesterday:
    Query:
    IT_QUERY_PROP[1]
      PROP_NAME      CREATED_AT
      SIGN           I
      OPTION         BT
      LOW            20100217000000
      HIGH           99991231235959
    And I get this result:
    LT_SRES[1]
      OBJTYPEP       P
      CLASSP         CRM_P_ORD
      OBJIDP         DF1C76C7D7D02BF1ABA8005056857C4E
      OBJTYPEL       L
      CLASSL         CRM_L_ORD
      OBJIDL         DF1C76C7D7D02AF1ABA8005056857C4E
      RANKV          05000
      DOCREFER       0000000001
    When I now use the WHERE_USED method I can find the Business Object where this document is attached to by filling the
    IS_IO parameter:
    IS_IO
      OBJTYPE                        P
      CLASS                          CRM_P_ORD
      OBJID                          DF1C76C7D7D02BF1ABA8005056857C4E
    Now my follow up question is: How can I update the last changed date of the document without changing any data?
    Best regards
    Gregor

  • After the last iPhone 5 update, the calendar date do not match the respective weekday. i.e. November 1st 2013 is marked as Saturday on the iphone.

    After the last iPhone 5 update, the calendar date do not match the respective weekday. i.e. November 1st 2013 is marked as Saturday on the iphone.

    I have this exact same issue!
    I was on 2.0.1 running fine until late last week, noticed emails would not show up unless I had opened them in outlook. I thought I ran into a bug so I upgraded to 2.0.2. Now I can sync my email if outlook had them opened previously, but no calendar or contacts at all. I don't think my exchange admins will move me to another server, any other ideas?
    I love my iphone but if these features don't work I can't use it. I would appreciate any ideas.

  • Last Skipped Date, Skip count, are not updated in any songs that i listen in my iPhone5s

    I've been using smart playlist that's relays on the play count, last skipped date and skipped count fields... I have been using an old ipod to heard my music through this smart playlist that live updates all the time and it was working great.
    So my issue is, since i bought a new iPhone 5S and start using it to listen music, my smart playlist that relays on " play count, last skipped date, skipped count " fields are not updating, and when i connect my iphone to the PC i realize that those fields never update after i play or skip any song in my iPhone.
    So, I'm not sure if this is an iPhone restriction, that i need to use my iPod again to get my smart playlist that relys on those fields to work... or my iphone is defective and need to re-install the iOS.
    Any help on this matter will be enormously appreciated
    Thanks in advance

    I have playlists that rely on the Last Skipped and
    Skip Count properties of songs, but these items only
    seem to be triggered if the song is fast forwarded
    between 3-20 seconds into the song. I tried to skip
    I think this is how it's intended, though there isn't much info on this feature. I've seen the same behavior and other users have reported same.
    One thing that threw me off for a bit using this feature was trying to use with playlists where the songs had "remember playback position" checked. Last skipped doesn't register at all with these tracks.

Maybe you are looking for