Last Inventory Date update in Quant
Hi All,
We use Cycle counting in our warehouse and it is triggered by LICC. When a count is performed through LICC, it updates the last inventory date as the last count date.
It also happens that sometimes we count at Bin level, use LI01N and use inventory method as "CC". But after inventory, the last inventory record in the quant is updated with the current record, but the last inventory date is not updated.
Is there a note out there to fix this issue?
Thanks
Jithin
Yes i saw that, but since we are using LI01N with CC method, it should behave the same. I am not questioning what SAP does. It is how theoretically it should have been and how it is not.
On the same note, how is LX26 and LICC different.
You should understand that LI01N + CC and LX26 is cycle counting for storage bin whilst LICC is for quant.
If you are not satisfied with this I cannot help you (I cannot modify SAP and I think none of simple forum members can do this...), please contact SAP AG.
Regards,
Csaba
Edited by: Csaba Szommer on Apr 15, 2009 8:42 AM
Edited by: Csaba Szommer on Apr 15, 2009 8:49 AM
Similar Messages
-
Physical inventory - Last inventory date
Hi,
We carry out physical inventory using LICC. Two parts were counted on previous day, however when a new list was generated to count parts two parts that were counted previously also appeared in this list.
'Old inventory date' field on table LAGP for these two parts did not get updated either.
Please can anyone let me know whey this could be happening ?
Thanks
MiraI thought the same thing when i checked quant values in LINV and LAGP.
1. I did find more than one quant for the same material.
2. User did not give any values in LICC except range of material (to include all the parts in given warehouse and storage type), warehouse number and storage typ.
Should not this take into account whatever quants there are in the system ?
I am not IM expert and appreciate your quick reply.
Thanks
Mira -
Last increase date updated incorrectly in HRMS 9.0
In HRMS 9.0, the LAST INCREASE DATE from PER_ORG_ASGN table gets updated incorrectly when an employee has pay rate change. what should we do. I have figured out peoplecode causing this issue. Reply me if you have any ideas
You should raise a SR onto http://metalink3.oracle.com
Nicolas. -
SharePoint 2007 Site Last Modified date issue
Hello,
Good Morning.
We are facing Last modified date update issue in MOSS 2007. From last 2 days, In All site content the site last modified date is displayed as 3 month ago but actually the site was last updated by more than 2 year ago.
Could you please help on how to resolve this issue.
Thanks in advance.
-TusharHi,
From your description, you think last modified date of your Moss 2007 site is wrong.
Could you offer a screenshot about your All site content page?
You can use the LastItemModifiedDate property of the Web object to get the last modified date of your site:
https://social.msdn.microsoft.com/Forums/sharepoint/en-US/2c74a56b-18b6-4dc9-b368-b96dcf7be3ec/last-modified-date-and-time-in-sharepoint-site
https://farhanfaiz.wordpress.com/2010/03/22/sharepoint-2007-last-modified-date-of-lists-document-libraries/
Best Regards,
Lisa Chen
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
SCCM 2012 SP1 How to Report All Computers Last Software Inventory Date
Hi! We´d like to confirm our sofware inventory is updated.
How can I report all computers last software inventory date?
Fabio Martins MCDST/MCSA Brasil!!!This will give you a collection of all systems with a defined LastScanDate.
Excluding this collection will give you the ones without a LastScanDate
select
SMS_R_SYSTEM.ResourceID,
SMS_R_SYSTEM.ResourceType,
SMS_R_SYSTEM.Name,
SMS_R_SYSTEM.SMSUniqueIdentifier,
SMS_R_SYSTEM.ResourceDomainORWorkgroup,
SMS_R_SYSTEM.Client
from
sms_r_system AS sms_r_system
inner join
SMS_G_System_LastSoftwareScan as c on c.resourceid=sms_r_system.resourceid
where
datepart(yy,c.lastscandate) >= 1997
AND
datepart(mm,c.lastscandate) >= 01
AND
datepart(dd,c.lastscandate) >= 01 -
Hi,
How I can find the last data update information(date and time) of multiprovider in BW?
Kindly help on this.
Regards
Mukul SinghalLet me explain how the "last data update" works.
If the query is based on one cube or DSO, it is the time of the last request upload.
If the query is based on a multiprovider, like the example given ealier,
assume there are three cubes in multiprovider :
Last update of cube1 is 11/17/2008
Last update of cube2 is 11/19/2008
Last udpate of cube3 is 11/20/2008.
The "last data update" will be the earliest day of the "last data update"s of all partproviders, i.e.11/17/2008.
Because the meaning of "last data update" is that, data (of all partproviders) has been already updated until this time.
Now we assume there are three cubes like this in multiprovider :
Last update of cube1 is 11/17/2008
Last update of cube2 is 11/19/2008
Cube3 is empty. It has never been loaded with any request.
Then the "last data update" will be empty. Because until no time has all partproviders been updated. This is the design of the system.
Regards,
Patricia -
How can we update the last synchronization date and time..on SUP in sccm 2012 R2
Hi,
Can you any one please guide me how can i update the last synchronization date & time in SUP on SCCM2012 r2 , some how its updated as future date and when ever i try to synch the SUP with disconnected WSUS its shows in the wsyncmgr.log
"Wakeup for a polling cycle " and " Wakeupby inbox drop" and "Wakeup by SCF change"
Thanks
Balaji KYou'll probably have to call CSS on this one as this not normal by any means. The messages you noted above are completely normal but if that's all you are seeing then there's an issue.
Have you reviewed wcm.log and wsusctrl.log?
Jason | http://blog.configmgrftw.com | @jasonsandys -
IPod Shuffle 2 no longer updating playlist play count and last played date
I use my shuffle 2 in the gym. When I'm done working out I sync and the most recently played songs are rotated off using a smart play list. This is no longer working. I reset the shuffle 2, I've forced sync and auto filled many times. My latest workout it still lists all the songs I just listened to in the order I listened to them and has their last played date as many months ago.
This seems to be affecting my other iPod too, but it is tougher to diagnose. I signed up to iTunes Match and after several days that is still running but I noticed this problem long before iTunes Match became available in Canada. Both my iPod Shuffle and iTunes are up to date but my music is on an older but upgraded Mac. It has a G4 so no Lion upgrade, I just checked it is 10.5.8All my tracks should be MP3s or AAC. I ripped them myselfs with iTunes. I may have bought some songs directly off of record labels or some other online music store, but I own my music legally whether I bought it on CD or got given it by magazines or record labels.
I went to the gym today. I set the shuffle to random. Some songs were synched back to iTunes but they weren't the songs I listened to, at least not all of them. Some of them may have been the songs I listened to last workout, at least one or two of the songs updated I did listen to today.
I listened to some other songs last night on my main Mac so it is easy to determine which songs iTunes updated this morning.
I haven't had much time to play with Match. It is still updating and uploading, it has 6000 songs to go. That means in a half month of trying it has managed to find and/or upload a little over 1000 songs actually close to 2000 now. It is something, but it isn't the service I was sold. All my songs and playlists were supposed to be available in the cloud. That hasn't happened and in the case of my smart playlists will never happen.
I'll read you link, but I wrote a blog posting how I was disappointed with the service so far.
Thanks! -
How to hide the Last date Update in the Excution of a report
Dear All,
When we execute a query in EP, the Out Result will contain the following Options
1) Save As
2) Open
3) Export Excel
4) Information
5 ) Comments
6) Filters
7) Settings
8) Last data update
Can anyone plese tell me how to give the authorisation in BI for the above options.so that we can give restrictions for some users.
hope everything is crear.
Please give me the hint atleastYou also have to test the value:
REPORT ztest MESSAGE-ID 00.
DATA: BEGIN OF itab OCCURS 0,
f1 TYPE i,
f2 TYPE i,
f3 TYPE i,
f4 TYPE i,
END OF itab.
DATA: sel_field(20),
value TYPE i.
DO 5 TIMES.
itab-f1 = sy-index.
itab-f2 = sy-index + 10.
itab-f3 = sy-index + 20.
itab-f4 = sy-index + 30.
APPEND itab.
ENDDO.
LOOP AT itab.
WRITE: /001 itab-f1, itab-f2, itab-f3, itab-f4.
HIDE itab.
CLEAR itab.
ENDLOOP.
AT LINE-SELECTION.
CLEAR: sel_field,
value.
GET CURSOR FIELD sel_field.
IF sy-subrc = 0.
CASE sel_field.
WHEN 'ITAB-F1'.
value = itab-f1.
WHEN 'ITAB-F2'.
value = itab-f2.
WHEN 'ITAB-F3'.
value = itab-f3.
WHEN 'ITAB-F4'.
value = itab-f4.
ENDCASE.
MESSAGE s001 WITH 'Value of' sel_field 'is' value.
ELSE.
MESSAGE s001 WITH 'Invalid field selected'.
ENDIF.
Rob -
After the last up date for Safari (Mac OS X 10.8.5 in a iMac mid 2011 21.5 inch 2.8GHz Intel Core i7)
The window don't open or they are there and only in an outline, kind of like they're behind the screen.
I have also done a system update and then a system reinstall.
What now? incident nr, 526941222.After the last up date for Safari (Mac OS X 10.8.5 in a iMac mid 2011 21.5 inch 2.8GHz Intel Core i7)
The window don't open or they are there and only in an outline, kind of like they're behind the screen.
I have also done a system update and then a system reinstall.
What now? incident nr, 526941222. -
Last Logon date and Logon time not updating in table USR02
Hi,
Please help us on this. After customer successfully logged in the webshop, we are checking the table USR02 in CRM system and the Logon date and Logon time is not updated. Because of this, the customer will be locked after certain number of days. When we check it in ECC system, customer's last logon date and time is updated. Can you tell us what could be causing this? Any advise what we need to check? Thanks in advance!
Regards,
MikeHi
1. Please check if the USAPPLREF table in ECC has the correct mapping done between the LOGON User and the Sold-to party (Customer)
2. Please check the validity of those user in SU01 user data.
3. Please check the USERS data from the USERADMIN Link (if it is configured in your scenario through XCM settings for USERS)
Hope this will help.
Regards -
Running BitLocker/MBAM 1.0.1237.1.
About 1 month ago, "Last Contact" date/time listed in MBAM "Enterprise Compliance Report" stopped updating (last updated 1 month ago) for all systems. However, reporting against these exact same systems individually via
"Computer Compliance Report" shows current/correct "Last Contact" date/time (last updated today).
Have tried http://support.microsoft.com/kb/2620269/en-us but no luck.
Hoping someone has experienced this before, fixed, and can share insights.
Thx,
DCLYou may want to look for communication errors under the MBAM node in Event Viewer.
You may also want to review the registry settings discussed under the
Configure Lab Computers for MBAM Evaluation section of this TechNet article:
HKLM\Software\Policies\Microsoft\FVE\MDOPBitLockerManagement\ClientWakeupFrequency
HKLM\Software\Policies\Microsoft\FVE\MDOPBitLockerManagement\StatusReportingFrequency
HKLM\Software\Microsoft\MBAM\NoStartupDelay
Specifically the StatusReportingFrequency
key.
Brandon
MDOP on the Springboard Series on TechNet -
Last Data Update in Visual Composer and Web App Designer
Hello,
We want to show the last data update in query result and we used 2
differents ways to do it: throught Web Application Designer (SP 12) and
Visual Composer (SP 10).
In query result of Web Application Designer, the last data update came
in GMT0 and in visual composer came ok (GMT - 3, that's our time zone).
This value (ROLLUPTIME) is taken out of the RSMDATASTATE table and this is used in SAPLRSMDATASTATE program, that is called by Web App Designer.
Why does the difference exist between: Web App Designer and Visual Composer for last data update?
So, I need more information how the Visual Composer brings the correct value (in our time zone) and Web App Designer in GMT0.
Best Regards,
Pablo MoraesHi Mario,
Yes, i used the same user and the same query to access the information. But, how can i check the mapping from my VC user to the BI user?
Regards,
Pablo Moraes -
Marker update for Inventory data sources
Hi all,
why we use marker update in Cube manage for inventory data sources at the time of loading?
i heard that to avoid the keyfigures cumulation we do check that option ,is that correct/
please clear my doubt
thxHI
(2LIS_03_BF Goods Movement From Inventory Management-------Unckeck the no marker update tab)
(2LIS_03_BX Stock Initialization for Inventory Management--
---select the no marker update check box)
2LIS_03_UM Revaluations -
Unckeck the no marker update tab)
in the infopackege of "collaps"
Cheers -
Query on Virtual cube 0FIGL_V10 show old "Last Data Updated:" on Portal
Hello all,
We are using the SAP delivered virtual cube for G/L financial statements reporting. We are running these queries on Portal (BI 7.0) we are using the 0ANALYSIS_PATTERN template. Now since we are not actually loading data in this cube the template show "Last Data updated" as long time back, I am guessing when the cube was last activated or transported.
The template and time stamp is working perfect for queries on all other cubes or Multiproviders.
The business users are asking can we have the actual time stamp there (when actually the data was last loaded),
Does anyone have any idea how we can do it without actually rewriting the queries on standard cube.
Thanks in advance,Hi Kiran,
Always last update data status only will see in our reports on last data updated date. It may be activation of data in cube. please check is there any option of activate data in data flow level.
Try to create one record in remote data source and load it again. It may be find the latest status.
Thanks,
Chandra
Maybe you are looking for
-
PDF Attachment Email Opening issue in ECC6
Hello, We are having problem with below report. I'm able to send emails(invoice) as PDF attachments , but the attached PDF file wont open. I'm getting a message "Adobe reader could not open attachement the file has been damaged".This report works in
-
I've got a 17" Mac Book Pro with Snow Leopard and Final Cut Studio 2 . Compressor 3 is only giving MOV-1 which are no use to me. So I've bought Compressor 4 from the App store which it says isn't compatible with the graphics card on my 2008 mbp. Can
-
Exporting to Excel data only using sub reports in Crytal 9
Post Author: pmstar CA Forum: Exporting I am using Crystal 9 verision. I have .rpt file that used 4 sub reports .In the main report I placed all the sub reports in the(detail section) row and using the data for some caluculation in the main report t
-
Issue in Oracle Business Intelligence Mobile
hi am kind of new with this app , i create the tables and repository .. now in the login page in the application everytime i try to connect with the server to locate my repository i can't .. i get error (( server authenication failed error [-1001 ]
-
Hi, We are having important folders , which has around 5000 subfolders and around 15000 files. How to take backup for those files. We are having Portal on Sun Solaris system. Thanks and Regards, Srini