Last invoice activity/Date in SAP- Any way to find out??

Hello,
Want to know if there is any way to find the last invoice date  per vendor in SAP. Is there any field in the table  that can give us the last activity of the vendor.
Thanks,
Riya

Hi
If it is a logistics invoice, you can get the information from table RBKP, where the entry date and time is stored for each invoice.
If you are looking for invoice directly posted in FI, you can use the same logic and can extract it from BKPF table by filtering based on document type.
Regards

Similar Messages

  • My iPhone 4 is chewing through power and data, is there any way to find out if an app is causing this?

    My iPhone 4 is chewing through power and data, is there any way to find out if an app is causing this?

    call them, tell them you NEED a new battery installed, and they need to tell you when they can do it.  That is their job to help you! Give pushback if necessary.

  • My friend's friend found an iPod and deleted the data is there any way to find out who owned it before via serial number, bring it in somewhere, or other way?

    Is there anyway to find out owner

    - Some users have said that if you contact Apple, Apple will try to contact the previous owner. Apple will not give you that information.
    Apple - Support - iPod touch - Contact Us
    - You should also report it to the police and here
    Report Stolen iPod | Stolen Lost & Found Online

  • Is there any way to find out what a specific line of data usage was for?

    There is a line on my bill for 97 MB of usage while I was bowling?  I was not using my phone.  How can I find out what it was doing for that specific charge?

    Just like you said earlier
    3.  Re: Is there any way to find out what brush is applied to a path?
           imagecollection     Apr 7, 2015 6:01 PM  (in response to Silly-V)   
    The skill of scripting in Illustrator is to (due to necessity) find the most difficult way to achieve the simplest of tasks...
    so to retort I say this;
    “I suppose it is tempting, if the only tool you have is a hammer, to treat everything as if it were a nail.”
      ― Abraham Maslow, Toward a Psychology of Being

  • Is there any way to find out a Tcode used by user in a particular interval.

    Hi
    Is there any way to find out a Tcode used by user between 10/8/2009 to 31/8/2009, in production?
    Satish.

    Yes i have been trying SE16N only. But i am unable to pull data based on dates (Aug/8 to Aug 21)... its showing list of users who have accessed the tcodes directly for entire month....
    Se16n ->Export mode->month->08/2009
      --->     Transacction profile -->Standard
    I want to find out only users who have used a particular tcode during those dates.....in august..
    Satish

  • Is there any way to find out exactly when I bought my mac

    is there any way to find out exactly how old my mac is. I know I bought it in 2009 but I am trying to find the exact date.

    Enter the serial number here and it will tell you all that and more:
    http://www.appleserialnumberinfo.com/Desktop/index.php

  • Any way to find out where most of the memory is being taken up?

    I've got a G4 Tower with the latest 10.5 OS. I have an 80 GB drive, with 19 GB remaining.
    Single clicking on Mac HD, then "apple i" shows me this.
    Is there any way to find out more specifically where most of the memory is being taken up?
    Say, what folders are the biggest in size, and where they are? I'd like to delete any unwanted crap if i could...
    Thanks.

    Photecs wrote:
    I've got a G4 Tower with the latest 10.5 OS. I have an 80 GB drive, with 19 GB remaining.
    Single clicking on Mac HD, then "apple i" shows me this.
    Is there any way to find out more specifically where most of the memory is being taken up?
    It's not memory, it's disk space which is a different thing.
    you can figure out what's taking all the space using 3rd party tools like [Whatsize|http://whatsize.en.softonic.com/mac], [Omindisksweeper|http://www.omnigroup.com/applications/omnidisksweeper>, [Disk Inventory X|http://www.derlien.com> or [Grandperspective|http://sourceforge.net/projects/grandperspectiv>. there is also a terminal method described on [this page|http://homepage.mac.com/francines/articles/TigerMisc.html].
    Say, what folders are the biggest in size, and where they are? I'd like to delete any unwanted crap if i could...
    Thanks.

  • HT5244 Is there any way to find out after(!) running die Update, if i have been infected?

    Is there any way to find out after(!) running die Update, if i have been infected?

    Run any one of these tools: http://reviews.cnet.com/8301-13727_7-57413811-263/flashback-malware-removal-tool -roundup/
    Or you can check manually: http://reviews.cnet.com/8301-13727_7-57410096-263/how-to-remove-the-flashback-ma lware-from-os-x/

  • Is there any way to find out where a standard text is used?

    Is there any way to find out where a standard text is used?
    We can see the text from SO10, but i want to find out where it is used.

    HI
    juct check out this thread
    How to find Standard Text
    a similar query is answered here
    hope this helps
    regards
    Aakash Banga

  • Is there any way to find out what brush is applied to a path?

    I'm trying to write a script: select some paths, run the script, then each path that has a brush applied to it is changed to use a random brush whose name is sufficiently similar to its current brush. The application is pretty obvious - draw a bunch of lines in, say, 'ragged marker 1', then give it some extra liveliness by having five or six 'ragged marker' brushes that get randomly chosen.
    The problem I'm running against is that as far as I can tell, Illustrator only lets Javascript set what brush an object is using with brush.applyTo (artItem), but I can't seem to find any way to find out what path a brush is currently using via JS.
    Am I just not looking in the right place of the Javascript reference, or is this really a thing that only has a setter, with no corresponding getter?

    Just like you said earlier
    3.  Re: Is there any way to find out what brush is applied to a path?
           imagecollection     Apr 7, 2015 6:01 PM  (in response to Silly-V)   
    The skill of scripting in Illustrator is to (due to necessity) find the most difficult way to achieve the simplest of tasks...
    so to retort I say this;
    “I suppose it is tempting, if the only tool you have is a hammer, to treat everything as if it were a nail.”
      ― Abraham Maslow, Toward a Psychology of Being

  • Is there any way to find out the serial number to an old ipod that i cannot find?

    theres a recall on the od ipod nanos the 1st generation ones and i purchased one and im not sure when and currently i am unaware of the whereabouts of the ipod. is there any way to find out the serial number without actually finding the ipod to confirm when i purchased it? thank you any help will be appreciated.

    iPod: How to find the serial number

  • Is there any way to find out who is accessing my find my iphone account ?

    Is there any way to find out who is accessing my find my iphone account ?

    No.  Go to id.apple.com, log in with your Apple ID & password, and immediately change your Apple ID password and security questions.
    Also, change the password to your associated emails counts as well.

  • Does anyone know if there's any way to find out what files in my Library

         Does anyone know if there's any way to find out what files in my Library I can delete? I just cleaned off my HD onto a media drive as a back up so all my movies documents and photos are gone but my Library seems to be a huge space hog eating sixty gigs of space and I do have alot of apps but they don't take up a third of that space... Any ideas how I can figure out what is wasting all this space? I had Spring Cleaning once but found it to be rather confusing as to what was essential to the OS and what not...
    Thanks,
    Matt

    Get free OmniDisk Sweeper. I can't imagine how you could have sixty GB in that folder. My entire ~Library isn't even 1GB. Are you sure you're not talking about your entire Home folder?
    Can you post a screenshot of the contents of that folder.
    Check again. Are you sure you moved all the Movies etc. out? Could have left duplicates of everything behind when you did this.
    Message was edited by: WZZZ

  • Any way to find out which program has created a job using 'JOB_OPEN'?

    Hi,
    I have some jobs created by some program. The job is incomplete, i.e., the programs which created the job just used 'JOB_OPEN' and it doesn't have any steps.
    Is there any way to find out which program created that incomplete job?
    Thanks in advance.
    Regards,
    Arun Mohan

    Not sure but try this FM
    BP_JOB_SELECT -Returns a table with job(s) details .
    кu03B1ятu03B9к
    Edited by: kartik tarla on Dec 30, 2008 6:50 PM

  • Is there any way to find out if my iPhone4 is factory unlocked or jailbroken....

    Is there any way to find out if my iPhone4 is factory unlocked or jailbroken....

    If they are not sure, then the answer is yes, your iPhone is jailbroken.
    What makes you question if your iPhone is jailbroken? What model
    is your iPhone (Settings=>General=>About and scroll down to Model)?
    What country did you buy your iPhone in? What wireless provider in
    what country are you using the iPhone with?

Maybe you are looking for

  • Menu bar no longer working with IE update

    With the recent update in IE my main menu bar is no longer working, the "hover" function is not working and looks like the links are broken, but the links do work if you actually click on them.  From my vista machine it is OK but from my XP machine i

  • Is there a way to share one music library with two seperate icloud accounts?

    Is there a way to share one music library with two seperate icloud accounts? I have over 12,000 songs in my library and my son likes the same music, but recently his ipod touch is picking up the texts from my wife's and my phone? I was told the only

  • Form Based Authentication not working for my sharepoint site.

    I am using FIM 2010 r2 on Sharepoint -80 . I tried to use forms based authentication instead of default windows based auth. But the site is not even redirecting to the custom login page i am trying to connect . Any suggestions ?

  • PSE8 and third party plug-ins

    I have just had to get a new compu8ter, iMac running 10.6.2.  I also upgraded to PSE 8.  I tried to move my old plugins to PSE 8 and now get messages that they cannot load.  I particularly want to use NoiseWare and Focal Blade. Can anyone help with t

  • PO date

    Hi expert There is tab in PO were is can assign date, after that particular date i wont able to migo and for the same i need message no for PO and Migo. Can some help me. Regard Nabil