Last Maverick update has slowed down start up time?
Last Maverick update has slowed down start up time?
Go step by step and test.
1. System Preferences > Startup Disk
Select Macintosh HD
http://support.apple.com/kb/PH13976
2. Repair Disk
Steps 2 through 8
http://support.apple.com/kb/PH5836
3. Reset PRAM: http://support.apple.com/kb/PH14222
4. Backup your data.
Install combo update.
OS X 10.9.5 combo update
http://support.apple.com/kb/DL1760?viewlocale=en_US&locale=en_US
Best.
Similar Messages
-
Since installing Maverick, speed has slowed down considerably. Not able to export photos form email to iphoto. What is going on?
When did you install?
Spotlight will need to re-index the entire system so that can cause slow performance if you updated recently. It can take many hours on a large disk with a lot of data. Click the Spotlight menu, it should say if it is still indexing.
There is no point trying to fix anything whilst this is ongoing, because it may just speed up when complete.
Are you able to drag photos from email to the Desktop or to iPhoto's icon? How about the 'File menu > Save attachments' option?
Please clarify what you have tried, otherwise we may waste time on the wrong thing.
If the system is generally unstable there are other things to try too, such as safe boot.
https://support.apple.com/kb/HT1455
That will isolate all third party software, if the Mac is able to do the things that didn't work it suggests that you have software that is loading at startup or login. The easiest way for us to see these is if you download EtreCheck & generate a report.
Post the report here & we can try pointing to items that you can either update or remove.
http://www.etresoft.com/etrecheck -
Does adding applicaions to Dock slow down start up time?
Does adding applicaions to Dock slow down start up time? I'm thinking about placing the whole creative suite on dock but I'm unsure whether it will slow down time it takes to start up my laptop, please help.
On the dock? Not particularly. If you have things starting up with the computer then yes.
Having lots of stuff on your desktop does though.
Best of luck. -
Yosemite 10.10.2 update has slowed down my iMac and Macbook. Anyone else have this problem?
My iMac and Macbook were operating well until the Yosemite 10.10.2 update. Now, the wheel spins when I try to scroll down on pages, or when I try to move from screen to screen. Programs freeze up more often, needing to be forced to quit, or just crash altogether. Safari has been particularly affected. Both computers are only 6 months old. I close all other programs and Safari tabs, but this does not help.
(iMac 2.7 GHz Intel Core i5, Memory 8 GB 1600 MHz DDR3; specs on Macbook not handy as I post this.)
I have come to dread OS X updates and I'll be careful about downloading them in the future. I am becoming more and more disappointed in Apple as a whole. The last time I called Applecare for help was pointless. I learn more from forums like this.Activity Monitor - Mavericks also Yosemite
Activity Monitor in Mavericks has significant changes
Performance Guide
Why is my computer slow
Why your Mac runs slower than it should
Slow Mac After Mavericks
Things you can do to resolve slowdowns see post by Kappy
Try running this program and then copy and paste the output in a reply. The program was created by Etresoft, a frequent contributor. Please use copy and paste as screen shots can be hard to read.
Etrecheck – System Information -
my mac has started freezing and suddenly shutting down on me it seems as if every process has slowed down since downloading this last update of 11.1.4, any solutions? Because it shut down in the middle of a test twice now, saying keyboard issue.
What you describe sounds like a hardware issue. Unfortunately, you'll need to get that checked out by Apple. If you have an Apple Store near you, make an appointment with the Genius Bar and take the machine in for evaluation.
-
System has slowed down considerably after updates from Apple. Is SyncServer the culprit?
I use MacBook with preinstalled OS Leopard since April 2009. I have also regulalry updated my computer system using the Software Update application. However, since my last update on 12th Aug 2011, I have noticed that my system has slowed down. There is long pause between every character I type, delay in switching applications, battery dries out quicker, slow response to every command.
I have started facing this problem after updating following software like iTunes 10.4, Safari 5.0.6, Migration Assistant Update for MAC OS Leopard & Quick Time 7.7 from Software Updater. Although, my OS is still leopard.
I noticed on the Activity Monitor that syncserver is using majority of my RAM and reappers even if I stop the process. Some of its subprocess like AddressBookSync also appears and consumes lot of memory. Is this the problem? Though, I never noticed earlier what size it consumed.
I use Microsoft Office suite for Mac and have also checked and deselected all sync services. Yet, the Process (PID 305) continues to appear in Activity Monitor.
I am no techie, and would appreciate quick help to resolve this issue.
Thanks!I was just about to write the same problem, but I don't have VMware; my laptop is late 2008 was running Snow Leopard (uptodate version).
I've scientific softwares so probably would require a clean re-installation of ML. I MUST MENTION HERE that those software which were written for PPC will NOT work on ML. Just found out that one of my important softwares version won't work on ML; need $500 to upgrade that software .
Therefore, I'd also want to know how can I go back to SL.
I'll let you know how clean re-installation has worked. -
After last maverick update macbook pro can't be shut down anymore - only by using the power button
Hello!
I hope that someone can help: after the last Maverick update I can't shut down the computer anymore - or restart. I need to use the power button. Furthermore several apps don't close when they are supposed to be closed - I always have to check with Force Quit. I could live with that, but not being able to shut down or restart the Mac is more than tiresome. Can anybody help?These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter "BOOT_TIME" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Note the timestamps of the BOOT_TIME log messages, which refer to the times when the system was started. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged before the boot, during the time something abnormal was happening. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
For example, if the system was unresponsive or was failing to shut down for three minutes before you forced a restart, post the messages timestamped within three minutes before the boot time, not after. Please include the BOOT_TIME message at the end of the log extract—not at the beginning.
If there are long runs of repeated messages, please post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Some private information, such as your name, may appear in the log. Anonymize before posting.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Step 2
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A crash report has a name that begins with the name of the crashed process and ends in ".crash". A panic report has a name that begins with "Kernel" and ends in ".panic". A shutdown stall report has a name that ends in ".shutdownstall". Select the most recent of each, if any. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot. It's possible that none of these reports exists.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash or panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful. -
I have a macbook pro 13’ (late 2011) 2.8Ghz Intel i7 memory 4GB 1333 MHz DDR3 and have upgraded my OS X Lion to Mavericks 10.9.5. Everything has slowed down and the battery lasts a bit earlier. How do I go back to the older OS X Lion? Or should I improve speed differently? Would improving memory to 8GB help?
i have run the EntreCheck and here is the report:
EtreCheck version: 1.9.15 (52)
Report generated 28 September 2014 16:16:39 GMT+3
Hardware Information: ?
MacBook Pro (13-inch, Late 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.8 GHz Intel Core i7 CPU: 2 cores
4 GB RAM
Video Information: ?
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1280 x 800
System Software: ?
OS X 10.9.5 (13F34) - Uptime: 0 days 4:59:22
Disk Information: ?
TOSHIBA MK7559GSXF disk0 : (750.16 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 749.3 GB (203.96 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-8A8
USB Information: ?
Apple Inc. FaceTime HD Camera (Built-in)
Vodafone (ZTE) Vodafone Mobile Broadband K3565-Z
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ?
Apple Inc. thunderbolt_bus
Gatekeeper: ?
Mac App Store and identified developers
Kernel Extensions: ?
[not loaded] com.ZTE.driver.ModemDriverMac (1.0.2d1) Support
[loaded] com.ZTE.driver.ZTEUSBCDCACMData (1.3.1) Support
[not loaded] com.ZTE.driver.ZTEUSBMassStorageFilter (1.3.1) Support
[not loaded] com.roxio.BluRaySupport (1.1.6) Support
[not loaded] com.roxio.TDIXController (2.0) Support
Startup Items: ?
HWNetMgr: Path: /Library/StartupItems/HWNetMgr
HWPortDetect: Path: /Library/StartupItems/HWPortDetect
StartOuc: Path: /Library/StartupItems/StartOuc
Launch Daemons: ?
[running] cn.com.zte.PPPMonitor.plist Support
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[running] PPPMonitord.plist Support
Launch Agents: ?
[running] cn.com.zte.usbswapper.plist Support
[running] com.hp.devicemonitor.plist Support
[loaded] com.hp.messagecenter.launcher.plist Support
[running] Swapper.plist Support
User Login Items: ?
iTunesHelper
Dropbox
Internet Plug-ins: ?
SharePointBrowserPlugin: Version: 14.0.0 Support
FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
Flash Player: Version: 15.0.0.152 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
Default Browser: Version: 537 - SDK 10.9
Safari Extensions: ?
AdBlock-2
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes: ?
Flash Player Support
MacFUSE Support
Tuxera NTFS Support
Time Machine: ?
Time Machine not configured!
Top Processes by CPU: ?
5% Safari
3% WindowServer
2% BitTorrent
2% hidd
0% softwareupdated
Top Processes by Memory: ?
229 MB Safari
160 MB softwareupdated
156 MB com.apple.WebKit.WebContent
135 MB com.apple.IconServicesAgent
102 MB VLC
Virtual Memory Information: ?
45 MB Free RAM
1.55 GB Active RAM
1.52 GB Inactive RAM
895 MB Wired RAM
628 MB Page-ins
0 B Page-outs -
I just upgrade to Maverick on my 2 year old MacBook Pro and it has slowed down the computer terribly. All I see every time I do anything is that crazy circle going round and round. I don't recommend you upgrading. How do I get rid of it. I believe it forces you to buy a new macbook!!!!
It does not. First things first have you tried restarting?
Try restting PRAM
http://support.apple.com/kb/HT1379
Try booting up in Safe Mode
http://support.apple.com/kb/HT1455
Also open "activity monitor" and look and see what is using a lot of processing power. -
Mavericks has slowed down my Mac. Some function in Mail don't work !
Mavericks has slowed down my Mac. I cleaned it but to no avail. Also Mail does not work well. Attachment picture cannot be exported to iphoto. Pretty disappointed ! Can anyone help. Thanks
Mavericks has slowed down my Mac. I cleaned it but to no avail. Also Mail does not work well. Attachment picture cannot be exported to iphoto. Pretty disappointed ! Can anyone help. Thanks
-
My DSL has slowed down over the last few months
Guys;
My DSL has slowed down over the last few months. I had the service that is up to 1.5 M and I used to get 1.2 ish on the verizon speed test, lately I've been getting between .9 and 1.0 at the most. I got the info from the speed test and here is a portion of that info:
------ Web100 Detailed Analysis ------
Client Receive Window detected at 1045440 bytes.
Cable modem/DSL/T1 link found.
Link set to Full Duplex mode
Information: throughput is limited by other network traffic.
Good network cable(s) found
Normal duplex operation found.
SHould I be concerned by the portion that I bolded and underlined?
Also, I just last night upgraded my service to the 1.1 to 3.0 service but I've not gotten a speed increase. Any suggestions?
ThanksHere is a complete post of the information from the verizon speed test:
Analysis information:
Checking for Middleboxes . . . . . . . . . . . . . . . . . . Done
SendBufferSize set to [130680]
running 10s outbound test (client to server) . . . . . 471.01Kb/s
running 10s inbound test (server to client) . . . . . . 556.87kb/s
------ Client System Details ------
OS data: Name = Windows XP, Architecture = x86, Version = 5.1
Java data: Vendor = Sun Microsystems Inc., Version = 1.6.0_29
------ Web100 Detailed Analysis ------
Client Receive Window detected at 1045440 bytes.
Cable modem/DSL/T1 link found.
Link set to Full Duplex mode
Information: throughput is limited by other network traffic.
Good network cable(s) found
Normal duplex operation found.
Web100 reports the Round trip time = 1247.01 msec; the Packet size = 1322 Bytes; and
There were 14 packets retransmitted, 4 duplicate acks received, and 5 SACK blocks received
The connection stalled 1 times due to packet loss
The connection was idle 2.65 seconds (17.66%) of the time
This connection is sender limited 75.84% of the time.
This connection is network limited 24.16% of the time.
Web100 reports TCP negotiated the optional Performance Settings to:
RFC 2018 Selective Acknowledgment: ON
RFC 896 Nagle Algorithm: ON
RFC 3168 Explicit Congestion Notification: OFF
RFC 1323 Time Stamping: OFF
RFC 1323 Window Scaling: ON
Information: Network Middlebox is modifying MSS variable
Server IP addresses are preserved End-to-End
Information: Network Address Translation (NAT) box is modifying the Client's IP address
Server says [xxx.xxx.xxx.xxx] but Client says [xxx.xxx.xxx.xxx] -
Since the update to Yosemite the MacBook has slowed down appreciably. Safari for example takes upwards of 30 seconds to load. How can I speed things up?
Hi ..
Not enough free storage space can slow your Mac down.
Click your Apple menu icon top left in your screen. From the drop down menu click About This Mac > More Info > Storage. Make sure there's at least 15% free disk space.
Freeing space on your Mac OS X startup disk
OS X Tips Where did my Disk Space go?
Check to see if the startup disk needs repairing.
Launch Disk Utility located in HD > Applications > Utillities
Select the startup disk on the left then select the First Aid tab.
Click: Verify Disk (not Verify Disk Permissions)
If Disk Utility reports errors, restart your Mac while holding down the Command + R keys. From there you should be able to access the built in utilities in OS X Recovery to repair the startup disk.
Make sure to back up all important data first before using OS X Recovery.
Anti virus software, as well as third party Mac cleaning utilities such as MacKeeper and CleanMyMac can also slow your Mac down.
For Safari.
Open a Finder window. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Relaunch Safari to test. if that doesn't help, troubleshoot Safari extensions.
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall. -
My mid 2011 MacBook Air has slowed down significantly overnight?
Last night my MacBook Air was working fine.
When I went to use it this morning, it has slowed down significantly. It takes awhile for it to respond to trackpad movement or the keyboard. Opening finder is delayed now, opening any app is delayed now. Booting it back up takes extra long now, probably around a minute compared to thirty seconds before.
I've tried an SMC reset, repairing the disk and repairing disk permissions.
From what I can see, the hardware doesn't appear to be failing, but I could be wrong.
Can anyone help me out? What could possibly be going on with my MacBook? How did this happen overnight?Your MacBook Air's memory is not upgradable, and as you already determined unused storage capacity is not a relevant factor.
There are many reasons a Mac may be performing slower than expected.
Back up your documents and everything else important to you before proceeding.
To help determine the possible causes of this behaviour read the following. None of what follows is intended to fix anything, but it will provide the additional information required to advance troubleshooting:
Boot OS X Recovery by holding ⌘ and r (two fingers) while you start your Mac. At the Mac OS X Utilities screen, select Disk Utility. Select your startup volume (usually named "Macintosh HD") and click the Repair Disk button. Describe any errors it reports in red.
When it finishes restart your Mac and test again for operation. If it's still not behaving as you expect it should, please post the results of EtreCheck in accordance with the following instructions:
Apple Support Communities contributor etresoft wrote a very useful app to quickly gather certain system information that may help point to a cause of this problem. Go to his website, download and run EtreCheck:
http://www.etresoft.com/etrecheck
Etrecheck will be in your Downloads folder. Open it from there. You may see the following dialog box:
Click Open - etresoft contributes to this forum frequently and can be considered a trustworthy developer.
It will take a moment to run as it collects its data.
Copy and paste its output in a reply.
Do not be concerned about anything that says "Problem" or “failed” or anything else that may appear in red.
EtreCheck was designed to remove any personal information (such as your computer's name and serial numbers) but if you see anything that looks like an email address or any other personal information that should not be divulged to others, please delete or obscure that information when you post the reply.
When you are finished with EtreCheck, quit the program. It occupies very little space, and you can keep it or drag it to the Trash as you wish.
After completing the above please determine if the problems also occur in "Safe Mode":
Safe Mode or "Safe Boot" is a troubleshooting mode that bypasses all third party system extensions and loads only required system components. Read about it: Starting up in Safe Mode
You must disable FileVault before you can start your Mac in Safe Mode.
Starting your Mac in Safe Mode will take longer than usual, graphics will not render smoothly, audio is disabled on some Macs, and some programs (iTunes for example) may not work at all.
Merely starting your Mac in Safe Mode is not intended to resolve the problem, it's to observe its performance without certain additional components.
To end Safe Mode restart your Mac normally. Shutdown will take longer as well.
To identify potential hardware problems: Apple Hardware Test. -
IiPad 2 has slowed down with ios8 copy paste is not working it hangs when you try to fill up forms ,Apple engineers you need to do something fast
Apple engineers do not participate here. Have you updated to iOS 8.1 which was just release yesterday? Have you done any other troubleshooting? If you haven't start here.
Go to Settings>Safari>Clear History and Website Data
Now close all apps. In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Next, reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If those three things made no difference, try this. Reset all settings. You will not lose any data, but most of the device settings will have to be entered in the settings app again. Settings>General>Reset>Reset all Settings.
If all of that fails, restore the iOS software. Backup your iPad before you restore, then restore the backup when you are done. If that still doesn't help, restore your iPad as new and start all over again. Most purchased content can be downloaded again at no charge as long as you use the same Apple ID and as long as the content is still available in the store.
Restore iPad to Factory Settings
http://support.apple.com/kb/ht1414
Download Past Purchases
http://support.apple.com/kb/ht2519 -
I foolishly opened a free online movie site and since then my pc has slowed down and i keep getting other sites popping up constantly.
What should i do??There is no need to download anything to solve this problem.
You may have installed one or more of the common types of ad-injection malware. Follow the instructions on this Apple Support page to remove it. It's been reported that some variants of the "VSearch" malware block access to the page. If that happens, start in safe mode by holding down the shift key at the startup chime, then try again.
Back up all data before making any changes.
One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those. If Safari crashes on launch, skip that step and come back to it after you've done everything else.
If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, ask for further instructions.
Make sure you don't repeat the mistake that led you to install the malware. It may have come from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
Malware is also found on websites that traffic in pirated content such as video. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates (OS X 10.10 or later)
or
Download updates automatically (OS X 10.9 or earlier)
if it's not already checked.
Maybe you are looking for
-
How do I reset the password to my Ipod touch in order for me to unlock the screen?
How do I reset the password on my Ipod touch to ulock the screen?
-
How do I get an iphoto slideshow into mobile me?
How do I get an iPhoto slide show (complete with audio, etc) published to my MobileMe?
-
Material distribution and division wise
hi experts, I need to take report what are all the items belongs to a particular distribution and division. regards arun
-
Problems creaating a webdynpro iView
I have a few links to a webdynpro application. I dunno where to put them in the webDynpro iview properties. Can someone help me out with this. Thanks
-
I'm making movies of my orchestra classes for my website and would like better audio quality than the DV Camcorder mic. Can I use a USB mic, such as the snowball at the same time? I'm recording straight to the hard drive (iMovie HD). Will it accept b