Last online backup have not yet been archived using BRARCHIVE
HI,
When I hit the T Code db12, it shows me that The redo log files created during the last online backup have not yet been archived using BRARCHIVE, They are needed for a complete recovery.
What should I do to archive those files? Please suggest.
Regards,
Rajesh
Rajesh, use Fidel's answer, it is the best one. his solution backs up the database and all needed redolog files for a full recovery.
for BRARCHIVE, use:
brarchive -u / -c -sd
you might need to adapt init[SID].sap file accordingly.
Similar Messages
-
Some or all of the samples requested have not yet been acquired?
Hi,
I'm running the labview codes (8.5) on Mac platform. The Daq part number is USB-6211. Here are more details:
Mode: differential, continuous sample
Samples per channel: 250,000
Sample rate: 250 kHz
Channel: A1, A9
The data acquisition goes well in the first hour and suddenly it shows error-200284, Some or all of the samples requested have not yet been acquired. The timeout is much higher than samples / sample rate, which is 100 s. Is anyone can help me with this? I attached the labview codes.
Attachments:
Screen Shot 2012-10-31 at 6.20.22 PM.png 265 KB1. As said, you should not be using the Run Continuously button. Use a while loop to acquire your data. Setup the task before the loop and close it out after the loop.
2. When you have the while loop, put a wait in there (1 second might be good). This will help avoid the timeout issue.
3. Propagate your errors. Have the while loop stop on the error or your stop button. Use the Simple Error Handler at the end.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines -
Accounting document have not yet been genrated
hii,
SAP Experts after save invoice, system gives error
Accounting document have not been genraed,,
i have done Revenue Account determinition...in VKOA
plz any others settins is there for solution...
thanks
sunilFirstly go to VF02 and go to the menu 'billing document' and click on 'release to accounting'. This will create the accounting document.
If u still get the error, Go to ENVIRONMENT, ACCT DETERMINATION ANALYSIS,REVENUE ACCTS. There you can get to know about the error in details. Then probably if u have error with revenue accounts then go to VKOA and rectify them..
If it still causes problem, check your material and acct assignment group assignments are properly attached to GL accts and your condition values will get updated thr only and not into some other assignment groups.
If still u cant find solution, then problem will be concerned with sm other condition types rather than revenue.. like cash discount or taxes... (if u have used them in pricing procedure).
Also chek your pricing proc control screens and see if u have assigned proper acct keys thr to condition types.
- Reward points if this helps. -
I have not yet been subscribed.
Hi! I paid on the 28th of June for the subscription of Bangladesh 400 mins 1 month. I still cannot use the subscription. Please give my subscription back.
Mac OS X v10.5, 10.6: About the Application Firewall
-
Hello,
I have a Apple ID, however when i am trying to login to App Store or iTunes, i am getting a message "This Apple ID has not yet been used with the App Store"?
I am able to login to iCloud with my Apple ID
Kindly Assist
Regards
ShujaIf you have never used the Apple ID to make purchases from iTunes or the Mac App Store you need to follow the steps to create an account with that Apple ID.
-
I have been using apple tv for 2+ years and i just purchased several new shows that began in Sept 2013. In the past, episodes I have not yet watched were marked with a green dot, but now that dot is not there.
Wow, Karan Taneja, you've just embarrassed yourself on a worldwide support forum. Not only is your post ridiculous and completely inappropriate for a technical support forum, but it also shows your ignorance as to whom you think the audience is. Apple is not here. It's users, like you.
If you would have spent half the time actually reading the Terms of Use of this forum that YOU agreed to by signing up to post, as you did composing that usesless, inappropriate post, you (and the rest of us on this forum) would have been much better off. -
how do sync a book that I have added as music to itunes on my iMac and then listen to this book on my iPhone. Itunes says the icloud status is waiting so the song(book) is in the process of being matched but has not yet been processed. (no help there)
Hi,
Why are you trying to add a book as music? It will not match as this only applies to music files. It will be uploaded if the bit rate is 96 Kbps or greater.
You should change media type to audiobook and you will be able to sync by wifi or USB.
Jim -
I have created an Apple ID yesterday and I could not use App store that shows a message when I try to install something that "This Apple ID has not yet been used in the iTunes Store". What should I do?
Try this support article > Using an existing Apple ID with the iTunes Store, Mac App Store, and iBooks Store
-
I have a iphone bought in canada but its not yet been activated
i have a iphone bought in canada but its not yet been activated . i want to unlock this phone . but to request unlock i cant find any operator registered with this iphone and in settings-about .. when i check here there is no information in carrier tab . . wat should i do to unlock my phone
if you go on to apple.com click suppport under self service you will see check your service and support coverage click that it will ask you for your hardware serial number that wont be hard to get even if your iphone is still on the activation screen if you have the original packaging there will be a IMEI or a MEID number on it if you dont you can if you can connect to itunes connect and opetn itunes select iphone on the left go to the summary tab and the IMEI or MEID number will be there if you can do that then you can try this to get the imei or meid it may or may not work try connecting the phone to itunes then go to perferences click the device tab and scroll over the display and it will show the imei and meid if that dosent work try connecting and disconecting it and try it again if all else fails try activating with itunes then doing that
-
this apple id has not yet been used with the itunes store ? no cards i have, this apple id has not yet been used with the itunes store ? no cards i have
this apple id has not yet been used with the itunes store
Can not connect in the App Store: ( -
i have creat new apple id when i sign in 1st time this will say this apple id has not yet been used in itunes store? please help
I changed my dads password, then went back to sync my apps and when it came to the Authorization, I entered his account name and the new password (which was by the way accepted and changed correctly) to have it come up on the screen as the incorrect password...REALLY!!! I went back and changed the password again...guess what? Same result "inncorect password".
As I mentioned my dad PASSED AWAY, there is no way I can ask him what his password originally was, i can't accesses his email account as it no longer exists.
What am I supposed to do, this is very frustrating.
If I use my new account that's in my name, the Authorization screen just keeps asking for my Dads account. -
I have Apple ID but I can not download Apps even for free, message box appeared "This Apple ID has not yet been used with the iTunes".
You can create an account without a credit card, check here:
Creating an iTunes Store, App Store, iBooks Store, and Mac App Store account without a credit card -
installed itunes, checked in, I try to download free applications out the window: this Apple ID has not yet been used with the iTunes Store. But the mail I receive, that I'm registered, and I have an Apple ID, please help find out!
Diana,
This could be a delay while internal service records were updated. Check it out again - is it okay for now? -
Hi, I just recently purchased an ipod touch 5 and have already forgotten my password. I have not yet connected it to my computer so when I tried today it didn't show up as a device. When I tried to go into icloud on my other device, thinking that may help, it would not let me change the email because it was my school ipad. What should I do?
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
please helpp!
A Google search reveals many discussions of this issue on this forum: This Apple ID has not yet been used...
Maybe you are looking for
-
Ok so, my itunes version is up to date, and I've located my itunes media folder... However, newly purchsed songs are not being backed up to the media folder, despite all the right options being ticked in the preferences box. This is immensly frustrat
-
SQL query with multiple tables - what is the most efficient way?
Hello I am learning PL/SQL. I have a simple procedure where I need to find number of employees and departments per location as per user input of location_id. I have 3 Tables: LOCATIONS location_id (pk) location_name DEPARTMENTS department_id (pk) loc
-
"iTunes could not backup the iPhone because the backup was corrupt or not compatible with the iPhone." Anybody else experienced this when trying to update iPhone software to 5.1.1??? How have you resolved this issue. Any help anyone can give will be
-
How to make text STAY up after removing mouse from button?
Hello! I honestly hope that this thread title makes sense. Allow me to explain my predicament. Someone has created a map where there are little colored buttons over building locations. The buttons were made so that when you hover your cursor over the
-
Hi, I've signed up for a twelve month contract but every time I try to convert a PDF I'm asked to sign up for a contract. Can someone tell me why?