Last physical inventory report

Is there a report that we can run by plant to show materials and the date of their last physical inventory count? Thanks in advance for your help.

Transaction MIDO.
a last count date can be seen while clicking the button Inventory data for material.
But you can directly monitor the situation via SE16 on table MARD. MARD keeps field last inventory date.

Similar Messages

Urgent: regarding physical inventory report display

hi,
i had made a report in which i have to display the physical inventory report details in which details about the material is to be given.
I want to check the details which are present in the tcode MI07 . Can anybody tell me any tcode in which i can see the details of mi07 tcode(including the reason of it).

Greetings,
It might shed some light to read about the display in your portable computer: http://en.wikipedia.org/wiki/LCD
LCDs are primarily plastic panels with various layers inside. Pressure applied to those panels can cause them to crack, leaking the liquid crystal components about. Pressure could be heavy books in a bag pushing against the screen, heavy cat sitting on a closed lid, dog, other animal, someone slamming the lid, child running through the room, etc. This applies to any LCD whether it be in a computer or in a Television (don't press too hard on your TV screen!!).
Displays don't exhibit the type of damage you indicate by themselves. A single pixel might go dead in an LCD but zig zag lines indicates cracking of the layers inside the panels themselves. Something from the outside world made an impact on the display resulting in the damage you see. You may not have been the one pressing hard on it and you may not have seen it happen, but something happened.
The 1 year limited warranty and AppleCare protection plan offer coverage for component failures, not damage.
Coverage for damage would be provided by something along the lines of insurances (home owners, renters, etc.) If you purchased this computer with a Credit Card you may wish to contact your Credit Card company. Many cards have included insurance for purchases you make so even if an item is damage during your use of it, they will cover it.
Best of luck.

Physical inventory Report

Hai Friends,
i have one requirement.
I NEED TO GET ONE REPORT IN THAT
Physical inventory report - in which i need get the details of What is the material ? how much stock i have posted ? how much system stock ? & what is differece between system stock & posting stock ?
please let me know if there is any SAP Standard report ?

For Physical Inventory SAP Standard reprts are enough.
T-Code - MIDO -Physical Inventory Overview
This transaction code you can check everything. it has links to many other Physical Inventory reports also.
Complete List pf Physical Inventory reports:
MI20 - Print List of Inventory Differences
MI21 - Print Physical Inventory Document
MI22 - Display Physical Inventory Documents for Material
MI23 - Display Physical Inventory Data for Material
MI9A - Analyze Archived Physical Inventory Documents
MIBC - ABC Analysis for Cycle Counting
MIDO - Physical Inventory Overview
MI24 - Physical Inventory List
enjoyyyyyy
Akshit

How to via physical inventory report?

I had run background job via mi30,then how can I to view all generated physical inventory document after running background job in mi30?

how could you execute MI30 if this transaction is not in SAP?
I guess you executed MI31.
Inventory numbers can be found in the log of the batch input session. But it is not really necessary to obtain the numbers from there for the next steps.
If you want print with MI21 , then just enter the selection criteria equal to your selection in MI31. SAP finds the documents itself then.
Best you flag the boxes in from of status selection for inventory docs and inventory items. and search by status.

MI21 Physical Inventory Report Sort by Storage Bin

Hi gurus.
I am working on INVENT, copied to ZINVENT SapScript and one of the requirements is to sort the report by Storage Bin. Currently the storage bins are fetched at print time item by item, not using an itab.
Is there any way to sort the items by Storage Bin (MABDR-LGPBE) in the code?
Thanks!
Julio

Hi Subas,
That's the problem, that field is not included in the items itab. This field is populated at item level, item per item when print form command is sent to SapScript. It is not stored in any itab.

Inventory report with the last transaction details of each material

Hi,
is there any standard inventory report in SAP which gives us the last transaction details of each
Material,along with last procurement qty, value, date and last issue
details of Qty, Value & date.
Thansk in advance.

Hi
try following t-code
MB5B u2013 Stock on Posting Date
or
2 s_p00_07000139 u2013 Stock Card and Inventory Material Report
Regards
Kailas Ugale

Physical Inventory & Cycle counting report

Hi,
Would like to reports on Physical Inventory & cycle counting.
Also would like to know a comparitive report which should show before & after Physical Inventory alsong with Qty & values per plant & material.
Will be pleased if I could have at IM level & WM level also.
Regards,
Vengat

Hi,
1. You can use T CODE- MI23 -Display Physically inventory data for material.
2. You can use T CODE- MB59 -Give material code/plant code/Mov Type 701-702/Posting period -Execute (F8) >> Click on current display variant button (Ctrl+F) for selection "Amt.in loc.cur".
Thanks & Rgds,
Rajesh

SCCM 2012 SP1 How to Report All Computers Last Software Inventory Date

Hi! We´d like to confirm our sofware inventory is updated.
How can I report all computers last software inventory date?
Fabio Martins MCDST/MCSA Brasil!!!

This will give you a collection of all systems with a defined LastScanDate.
Excluding this collection will give you the ones without a LastScanDate
select
SMS_R_SYSTEM.ResourceID,
SMS_R_SYSTEM.ResourceType,
SMS_R_SYSTEM.Name,
SMS_R_SYSTEM.SMSUniqueIdentifier,
SMS_R_SYSTEM.ResourceDomainORWorkgroup,
SMS_R_SYSTEM.Client
from
sms_r_system AS sms_r_system
inner join
SMS_G_System_LastSoftwareScan as c on c.resourceid=sms_r_system.resourceid
where
datepart(yy,c.lastscandate) >= 1997
AND
datepart(mm,c.lastscandate) >= 01
AND
datepart(dd,c.lastscandate) >= 01

Physical inventory - Last inventory date

Hi,
We carry out physical inventory using LICC. Two parts were counted on previous day, however when a new list was generated to count parts two parts that were counted previously also appeared in this list.
'Old inventory date' field on table LAGP for these two parts did not get updated either.
Please can anyone let me know whey this could be happening ?
Thanks
Mira

I thought the same thing when i checked quant values in LINV and LAGP.
1. I did find more than one quant for the same material.
2. User did not give any values in LICC except range of material (to include all the parts in given warehouse and storage type), warehouse number and storage typ.
Should not this take into account whatever quants there are in the system ?
I am not IM expert and appreciate your quick reply.
Thanks
Mira

Physical Inventory IM write off report with values

Hi All
I am having difficulty in finding a standard transaction that will detail IM write off with a value/cost.
I can see tha values in the LI20 trx which is at WM. However, when you write it off at IM (LI21) it only shows material and quantity and not value. I cannot bring the field in using the layout.
The only way i can currently get the info is to export the data from MB51 (711 and 712 movements) and merge the table in excel with a material cost table and calculate the vaule written off that way.
I need to know the cost to be written off at IM level before I click on the Write Off button.
Any ideas?
Darren

Not really clear what you want or why you are complaining.
LI20 is clearing WM differences. Which is a madatory step in the physical inventory cycle. This one will show you the value. and this one is before you post the differences to IM.
LI21 will not show costs. If you wait with LI21 then you might get other costs than shown in LI20, however, more critical is the stock inconsistency that you have between WM and IM until you execute LI21.
MB51 has the value within, no need to export to Excel and valuated it with a price from another download.

A,B,C indicator Physical Inv report

We have maintained the A,B,C indicator in MRP view for materials.and changed the description of A,B,C as per material category. When we post the physical inv. diffrenec, we need to have physivcal inventory report with last count date and with A,B,C indicator.
Is it possible? pl note we are not using cycle counting here. It is our normal process with MI01/04/07.
Thanks

You have to develope an own report.
E.g reading the difference movements 701-718 from table MSEG and looking up the ABC indicator from table MARC

Physical Inventory in WM

Hi,
I got some questions related to physical inventory.
Our customer wants a physical inventory based on the material (both for IM and WM). In WM "next empty bin" for putaway and "FIFO" for picking are used.
During the physical inventory process the following should be possible:
1) Per day a certain amount of materials should be inventoried (depending on the time the warehouse worker has time for that). That means in case of WM it should be possible to enter the quantity of materials to be inventoried and the inventory document then contains all the bins where the material is.
2) A report that shows which materials are already inventoried and which are not inventoried so far.
The only possible physical inventory method in SAP for 1) could be cycle counting as this provides the information in MARC when the last inventory was done. For all other methods (annual, continous) this information is stored in the bin only. But I could not find anything to enter the amount of materials I want to inventory. If I use cycle counting I would get all materials the first time running LX26. Sure I can select 50 bins per document and only activate some of the documents but then it could happen that the same material is in more than one document.
2) No standard report available.
Is there a way to do that in standard SAP? In case it involves changes where do you see them?
Cheers
Mathias

Hello Mathias,
<b>1) Per day a certain amount of materials should be inventoried (depending on the time the warehouse worker has time for that). That means in case of WM it should be possible to enter the quantity of materials to be inventoried and the inventory document then contains all the bins where the material is.</b>
I suggest you to use Quant based cycle count inventory (Transaction code LICC), with this transaction you will be able to give your material input and you can also select the quant for which you want to carry out the inventory, it will not block entire bin
For more informaiton <a href="http://help.sap.com/saphelp_erp2005vp/helpdata/en/7b/bb0bc8b3c911d3b2ad0050045571f7/frameset.htm">Cycle count for Quant</a>
2) A report that shows which materials are already inventoried and which are not inventoried so far.
If you are using the inventory other than cycle count in that case, it will update the inventory details at bin level, but if you use Quant Cycle count inventory it will update Quant data as well so you can generate report from LQUA table or use the standard report LI15 transaction code
<b>The only possible physical inventory method in SAP for 1) could be cycle counting as this provides the information in MARC when the last inventory was done. For all other methods (annual, continous) this information is stored in the bin only. But I could not find anything to enter the amount of materials I want to inventory. If I use cycle counting I would get all materials the first time running LX26. Sure I can select 50 bins per document and only activate some of the documents but then it could happen that the same material is in more than one document.</b>
to resolve this use LICC instead of LX26
2) No standard report available.
There are couple of reports available which are more business user friendly with detailed invormations.
Go to SAP Menu --> Logistics --> Logistics Execution -> Information system --> Warehouse --> Phy Inv --> with bin inventory
Hope this helps.
Regards
Arif Mansuri

Physical Inventory by Continuous Method

Hi Gurus,
We were doing cycle count inventory for last couple of years. Now we want to go for Continuous Physical Inventory Method. In Trx OMNK I select the Inventory Method PZ and remove the cc indicator for all the storage types. From Material Master I also removed the cc physical inventory indicator (ABC) from each material. We are using ver 4.6c
I ran the Trx LX16 to create the Physical Inventory Document. But I'm not getting anything except a info message "no data exist (select again)".
I've checked that storage type has inventory for most of the materials and no physical inventory has been done for that specific storage type in current Fiscal year. Our Fiscal year ended on sept. 30th 2007. Now we are in new Fiscal Year.
Please advice why I'm getting above error and how to resolve it?
Is it related to some Fiscal year end activity? What is that activity?
Your help is much appreciated. Points will be rewarded.
Thanks,
Gary

Thanks for your reply.
Yes we did couple of items with cycle count.
In LX22 there are no document with status "No Cleared"
In LS03N at Inventory Tab there is no info at all
When I run report RLREOLPQ it only gives me the static display report with Whous No, Storage Type, Quant, Material Number. I can print or save as a file but there is no option like reset or update inventory etc. What I'm supposed to do after running report RLREOLPQ.
In ran LX16 after RLREOLPQ but got the same result.
Your help is very appreciated.
Thanks a lot sir, waiting for your reply

Need help in creating a Physical Inventory Document with HUs given

Hi Gurus,
There is a problem I am facing while doing a ALV report.
I have created the report and there is a button which i have fixed which has to create Physical Inventory Document.
The scenario is:
I will select the records in the report based on the Vessel Bill Of Lading (VBOL) (related to Batch characteristics of a material) and then i need to pass those values to create Physical Inventory Document.
I got a functional module HUINV_DOCUMENT_CREATE which will create the document but I am not clear what are the values that I need to pass in this.
Or do anyone know how to create the Document by passing HU (Handling Units) and Plant & Storage Location?
Please help me in the same.
Thanks and Regards
Vipin Das V

Hi ,
Just Pass the table of Handling Unit .That's all.
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Mar 28, 2008 5:12 PM

Material blocked due to a physical inventory

Hello,
I have an issue.
I have done a stock take via MI01, MI21, MI04 and finally MI20!
When I afterwards create a delivery with one of that part that was counted it gives me an error message saying:
M7100 - Material xxx blocked due to a physical inventory
When I look into the inventory document it says: Counted, adjusted.
While debugging I found out that the process somewhere checks MARD-SPERR which is X for that part and therefore outputs messsage M7100! But X only indicates that posting block was set while physical inventory was done!
Does someone have an idea? Is there maybe a report to verify and correct inventory status?
Hope someone can help, cause I've counted a hundreds of parts which are now blocked.
Thanks for your reply.
Wolfgang

Hello Wolfgang,
If you enter the differences for your physical inventory documents against those materials, then the posting block check shall automatically go off and you can do the material movements.
First, you need to check whether you posted the differences for the respective physical inventory document.
If not you need to post the difference first as it may lead to data inconsistencies.
To remove the posting block go to MI02, enter the physical inventory document number and year, now go to Header and untick the posting block check box.
Posting block indicator
The indicator remains in the physical document header even if the stock is unblocked through the posting of inventory differences. It then only indicates that a posting block was set for the documents.
The blocking indicator can be set in one of two ways:
Directly upon entry of the physical inventory document (if the count is to take place immediately)
Shortly before the count (if the count is to take place later)
You can set the indicator by choosing Physical inventory document -> Change in the header data of the physical inventory document or via batch input.
Now you can create delivery for the materials.
Br,
Tushar
Edited by: Tushar Patankar on Jan 24, 2011 5:30 PM

Last physical inventory report

Similar Messages

Maybe you are looking for