Last query refresh failde due to internal errors ?

Hi gurus
we are working on SRM 7.0 with PPS,
when Bidder tries to open his login page and wants to see the Rfx raised against him, He is getting error message,
" Last query refresh failed due to internal error"  , some time this is due to another session witht he same query is open , but
I am getting the same error in the following situation,
suppose bidder has submittted his response and after submission he is trying to change the response and couldn't submit before the submission dead line then the version of the response will be c1, and which is not interpreted by the system, and so the error is .
Any help or advice on the issue is highly appreciated.
Regards
NITIN
Edited by: nitinkk on Jan 12, 2012 7:55 AM

Dear Rahul,
Thanks for replay,
I have checked it but the issue comes  with the discribe procedure.
and we have solved it now.
Regards
NITIN

Similar Messages

  • OMF export failed due to internal error

    I get this error message whatever I do when I try to export as OMF:
    "OMF export failed due to internal error"
    I tried OMF 1 and 2.
    I tried to uncheck "include audio".
    I tried an extremely small project (one region, one track).
    Always the same error. Problem is there's absolutely no information on what kind of internal error this is.
    All other export options (AFF, Open TL and Final Cut) works.
    Any ideas?

    I suppose that beside CCM 4.1(2) you are using AC 1.4 (1), if yes, then you need to upgrade to AC 1.4 (1) ES11 or upgrade at least to CCM 4.1(3)ES42 or CCM 4.1(3) sr3c
    HTH
    //Jorge

  • Calls failing to connect due to "Internal Error"

    I have been having issues, with increasing frequency, with Skype on my Mac as well as iPhone. Now EVERY time I try to call a phone number it gives the notification of "Call ended - internal error". What the **bleep**?

    Hi, SOMEONE PLEASE HELP!
    I'm a premium subscriber and I've had multiple calls fail today due to "internal error" and these are USA to USA calls. No proxy, nothing out of the ordinary, and they're failing...been going on for a couple days.
    I'm using the most updated version, I've restarted multiple times.
    PLEASE HELP!!!

  • Download request is dropped due to internal error.

    Safari Version 6.0.5 (7536.30.1)
    iMac 27 Zoll, Mitte 2011
    Plug-In-Version 11.7.700.225 ist installiert.
    Try for about 4 weeks to install the update to version 11.8.800.94. Always get the same message from Safari : 62.159.74.72:80->192.168.2.42:60501 Download request is dropped due to internal error.
    I don´t know what else to do to make this work..??? Even tried to download the offline version which i found after a week of research- get the same message trying to download the file..

    I don't know what is preventing you from downloading that installer.
    Can you try to download the latest archive from http://helpx.adobe.com/flash-player/kb/archived-flash-player-versions.html, then extract the installer from there?

  • "Failed to transfer due to internal error" in AC

    I am running CCM 4.1(2)
    I have several receptionists that use attendant console. When anyone of the receptionists log into AC call control comes up. When they try to transfer to users in the directory they all get the "Failed to transfer due to internal error" I can't find this error anywhere. I don't know how to correct this issue. Any ideas?
    Thanks

    I suppose that beside CCM 4.1(2) you are using AC 1.4 (1), if yes, then you need to upgrade to AC 1.4 (1) ES11 or upgrade at least to CCM 4.1(3)ES42 or CCM 4.1(3) sr3c
    HTH
    //Jorge

  • The last time you ran LabVIEW, an internal error or crash occurred at source/typedesc/DSTM.cpp, line 211.

    Nickled and dimed once again by obscure errors. This is LabVIEW 10.0.1 on Redhat EL 5.5 32-bit.
    I removed an enum from the project that is also used in a typedef control cluster. Since many VIs use this typedef I have to go to each VI and save in order to remove the phantom dependencies (i.e. popup can't find enum ctl when opening VIs). In the process of opening every VI and saving LabVIew is crashing on me reliably but not everytime just after I press cancel when it tries to find the enum ctl.
    Here are the errors. Sometimes the address is null....I believe LabVIEW src code should check for null/bad pointers but does not in this case.
    GenNAryOp_ArrayBase : naryop, setdef? ninp=1
    Compiler error.  Report this problem to National Instruments Tech Support.
    copy cvt str/pict/tag, csrc=0xFF
    Compiler error.  Report this problem to National Instruments Tech Support.
    copy cvt, csrc=0x21
    Compiler error.  Report this problem to National Instruments Tech Support.
    copy cvt bool, csrc=0x30
    Compiler error.  Report this problem to National Instruments Tech Support.
    copy cvt str/pict/tag, csrc=0xA
    Compiler error.  Report this problem to National Instruments Tech Support.
    copy cvt, csrc=0x50
    LabVIEW caught fatal signal
    10.0.1 - Received SIGSEGV
    Reason: address not mapped to object
    Attempt to reference address: 0x0xffffffff
    Upon reopening LV I see this.
    The last time you ran LabVIEW, an internal error or crash occurred at source/typedesc/DSTM.cpp, line 211.

    Hello wbdoyle,
    I'm sorry you are seeing that error. Did you close and save the type def that included the enum? This should prevent you from having to go through and save each VI that includes the type def.  Are you using the System Exec VI? Also, are you performing any data acquisition with the VI you are referencing? The error you are seeing indicates that the LV compiler isn't handling something in your VI and I want to pinpoint exactly what is happening.
    Thanks!
    Regards,
    Anna L
    Applications Engineer
    National Instruments

  • 'OMF export failed due to internal error' message

    Hi,
    Has anyone ever got an 'OMF export failed due to internal error' message when trying to export in OMF format?
    I get that every time I try to export in that format.
    How can I make it work?
    Thanks and best,

    Hello sj holcombe,
    And welcome to Apple Discussions!
    Have you had a chance to check out this Apple support document directly related to this issue? If not, it is a good place to start.
    [iTunes displays a -69 error when syncing iPod|http://support.apple.com/kb/HT1210]
    Hope it helps.
    B-rock

  • I just got my Droid Turbo. Deleted lots of emails yesterday and now not receiving any. When I try to refresh, I get an internal error, but can't figure out why. Any ideas?

    I just got the Droid Turbo.  I deleted several emails yesterday and now today, I am not receiving any.  When I try to refresh, I get an internal error. I have tried turning the phone off and checked my settings as well, but still getting nothing. Any ideas??

    I figured it out. Deleted and re-added the account.

  • Displaying the Last Query Refresh date/time

    Hello,
    on a Webi report, is there a way to display the date/time that the underlying info provider was refreshed?
    Thanks,
    Nikhi

    1.- Create Formula in Query (columns - Create Formula)
    2.- Create Formula Variable for this Formula (Type Customer EXIT) as individual and optional.
    3.- Define the code for customer exits for variables.
    *-- To get Timestamp for last load of data to cube
    WHEN 'ZLSTLOADDT'.
    DATA: lt_tab_1 TYPE TABLE OF rsdcubemulti,
          ls_tab_1 TYPE rsdcubemulti,
          lt_tab_2 TYPE TABLE OF rsmonicdp,
          ls_tab_2 TYPE rsmonicdp.
    DATA: l_calday   TYPE d,
          l_time     TYPE sy-uzeit,
          l_tzone    TYPE ttzz-tzone,
          l_string   TYPE char20.
          SELECT * FROM rsdcubemulti INTO TABLE lt_tab_1
                  WHERE infocube = i_s_cob_pro-infoprov
                    AND objvers = 'A'.
          SORT lt_tab_1 DESCENDING.
          CLEAR ls_tab_1.
          READ TABLE lt_tab_1 INTO ls_tab_1 INDEX 1.
          REFRESH lt_tab_2.
          SELECT * FROM rsmonicdp INTO TABLE lt_tab_2
                  WHERE icube = ls_tab_1-partcube.
          SORT lt_tab_2 DESCENDING.
          CLEAR ls_tab_2.
          READ TABLE lt_tab_2 INTO ls_tab_2 INDEX 1.
          l_tzone = 'INDIA'. "CET, UTC...
          CONVERT TIME STAMP ls_tab_2-timestamp TIME ZONE l_tzone
                     INTO DATE l_calday "aaaammdd
                          TIME l_time.  "hhmmss
          l_s_range-low = l_calday.
          l_s_range-sign = 'I'.
          l_s_range-opt = 'EQ'.
          APPEND l_s_range TO e_t_range.
          EXIT.
        WHEN 'ZLSTLOADTM'.
    DATA: lt_tab_1 TYPE TABLE OF rsdcubemulti,
          ls_tab_1 TYPE rsdcubemulti,
          lt_tab_2 TYPE TABLE OF rsmonicdp,
          ls_tab_2 TYPE rsmonicdp.
    DATA: l_calday   TYPE d,
          l_time     TYPE sy-uzeit,
          l_tzone    TYPE ttzz-tzone,
          l_string   TYPE char20.
          SELECT * FROM rsdcubemulti INTO TABLE lt_tab_1
                  WHERE infocube = i_s_cob_pro-infoprov
                    AND objvers = 'A'.
          SORT lt_tab_1 DESCENDING.
          CLEAR ls_tab_1.
          READ TABLE lt_tab_1 INTO ls_tab_1 INDEX 1.
          REFRESH lt_tab_2.
          SELECT * FROM rsmonicdp INTO TABLE lt_tab_2
                  WHERE icube = ls_tab_1-partcube.
          SORT lt_tab_2 DESCENDING.
          CLEAR ls_tab_2.
          READ TABLE lt_tab_2 INTO ls_tab_2 INDEX 1.
          l_tzone = 'INDIA'. "CET, UTC...
          CONVERT TIME STAMP ls_tab_2-timestamp TIME ZONE l_tzone
                     INTO DATE l_calday "aaaammdd
                          TIME l_time.  "hhmmss
          l_s_range-low = l_time.
          l_s_range-sign = 'I'.
          l_s_range-opt = 'EQ'.
          APPEND l_s_range TO e_t_range.
          EXIT.

  • Query not opening due to the error in Calculated Key Figures

    Hi Guys
    I have created 10 CKFs based on the replacement path type of formula variable using the attibutes of the charectistic Info Object which has been added to the cube.
    I am getting the error to open the query while executing it with some of the 10 CKFs is u201C Value '' is invalid for property 'Dimensions' of element 'Formula variable for calculation of Score for Potentialsu2019u201D
    My question here is : Why should we get the error only for some attributes and other are working fine from the same charectistic. Will there be a problem with the master data object/dimension or problem in the variable definition.
    Any help will be appriciated.
    Thanks
    Murthy

    Hi Edwin,
    I put the field in include ZRSRZTOP and now it works.
    I really appreciate your help,
    thanks
    Ricardo

  • The last time you ran LabVIEW, an internal error or crash occurred at fpsane.cpp, line 444. WHY?

    I keep getting this error every time I open LabVIEW 10. Everything seems to be working fine whenever I'm using it but for some reason, LabVIEW would not close properly and linger in the background. I still see the icon in the task bar and I would sometimes close it with task manager in order to re-use LabVIEW. Does anybody out there know how to fix this problem?
    Attachment:
    Solved!
    Go to Solution.
    Attachments:
    lvlog2010-11-30-09-23-36.txt ‏3 KB

    Thanks Hinz,
    I believe I was able to solve this particular problem myself by using "LVdebugKeys". I was able to isolate the offending VI using the debug and it came out that an old "Write Test Data to File vi." does not work well with LV2010. I replaced this vi and it no longer gives me the error.
    Thank you for your help.
    Attachments:
    Write Test Data To File.JPG ‏3 KB

  • ORA-00600: internal error when delete master rows in a materialized view

    I have a materialized view in 11g2 on Redhat 5, defined asCREATE MATERIALIZED VIEW mv_idty
    PARALLEL BUILD IMMEDIATE REFRESH FAST ON COMMIT ENABLE QUERY REWRITE AS
    select IDTY_NAME_FIRST,IDTY_NAME_MIDDLE,IDTY_NAME_LAST,IDTY_NAME_SUFFIX,IDTY_SSN,
      IDTY_DR_LIC_NUM,IDTY_DR_LIC_STA,x.person_id,i.rowid i_rowid,x.rowid x_rowid
      from idty i,person_x_idty x where x.idty_id=i.idty_id; I deleted a few rows from the master tables and get error13:58:48 SQL> delete idty where  idty_id like 'test_row%' ;
    7 rows deleted.
    13:58:52 SQL> commit;
    commit
    ERROR at line 1:
    ORA-12008: error in materialized view refresh path
    ORA-00600: internal error code, arguments: [kkzfrfajv_markdml-1], [], [], [], [], [], [], [], [], [], [], [] I have other materialized views and they all delete master OK. This is the simplest one but causes problem. HELP!
    Edited by: user13148231 on Aug 11, 2010 5:45 PM

    Checked note 743766.1. It is not 100% relevant as it is about import, but the query is usefulselect sowner, vname, mowner, master from sys.snap_reftime$It reveals the materialized view some how based on other schema.
    Recreate the materialized view. problem solved.

  • Internal Error occurred while calling the ProcessDPCommands API

    We have installed Business Objects XI  with MySQL. We are getting following error when we click on view query on the WEBI Reports
    " Internal Error occurred while calling the ProcessDPCommands API  Error WIS 30270".
    When we change the CMS database to ORACLE everything works fine it looks like some issues when CMS database is MYSQL
    Please hep to fix this problem
    Installation is on Solaris 10
    Edited by: AshishDatar on Nov 6, 2009 3:00 PM
    Installation is on Solaris 10

    did you check whether universe connection is pointing to the correct db?The following url might be helpful:
    [http://www.forumtopics.com/busobj/viewtopic.php?t=52355&view=previous]

  • DISK PERMISSIONS "INTERNAL ERROR"

    Disk utility does not complete repair of Permissions due to "internal error"?
    Not even with SOFTWARE RESTORE #1 disk.

    Hey, I hope I did it right. I am new at this. THE BOARDS is great! I originally posted the problem at the beginning of the catagories area using the search insert, and inadvertantly posted it within several different topic areas.
    THE BOARDS had changed a little since the early 2005's as well.
    PECOS BILL from another area should take credit, as to that's where I found the answer. Got so many e-mails the first day, had to shut down subscriptions for the topic!
    Good Luck.
    POWERBOOK G4 17inch   Mac OS X (10.3.9)   1.5 GHz MB DDR SDRAM 80GB HD

  • "investiga​te previous internal error" every time I start LV 8.2.1

    Hi,
    Every time I start LV 8.2.1 I get a message "The last time you ran LabVIEW, an internal error or crash occurred at fpsane.cpp, line 401" and it asks if I want to investigate now. I don't have any problems while running the application, compiling it or building an installer. Does anyone have any idea what this is and if it's important?
    Thanks,
    Danielle
    "Wisdom comes from experience. Experience is often a result of lack of wisdom.”
    ― Terry Pratchett

    Although the VI runs, it may have a strange entry somewhere. 
    I did get that message a couple of times.  From what I can recall it was when running omething & I had to kill the execution, or shut down LV completely.  Upon re-start of LV a similar message popped up.   The message did not re-appear at the next start.  Maybe I inadvertently fixed it without knowing..
    Try loading your VI, running it once.  Saving it.  Shut down LV.  Restart LV.  And check to see if the message continuous to appear. (you may have to repeat the steps once).
    Oh... Do you have any Disable Structure which has some unfinished code iside it?  I do recall that...  Who knows..  (???)
    RayR

Maybe you are looking for