Last reading restart ... iTunes doesn't start by the beginning Oô

Hi there !
So, here's my problem.
Recently, I downloaded iTunes last version ... And sinse that day, every time I play a song on my computer, this stupid machine starts again where it stopped last time I heared it !
I mean, if the last time I played the song, I switched at 1:32, the song will start reading at 1 minute and 32 seconds, not at the begining ...
And there's also a shortcut problem, if I press the left arrow key, the song doesn't just restart, iTunes think it's a better idea to read the song before in the playlist ...
... Help ? ^^°

See Troubleshooting issues with iTunes for Windows updates.
tt2

Similar Messages

Exporting to iTunes: track doesn't start at the beginning

Hi'all
This isn't a specific GB'08 question...I have exported a number of podcasts to iTunes and downloaded them onto my Shuffle. Annoyingly, they tend not to begin at the start of the track, but rather, a few seconds in. It is possible to rewind to the beginning of the track, so it is all there, but I can't encourage the tracks to begin there!
Any help would be much appreciated!
Many thanks

One trick is to move the entire podcast/song over a measure or two, so it doesn't start on the downbeat of measure 1, but the downbeat of measure 2.
Command A to select all tracks, and then slide everything over one measure to the right so measure 2 is the new "measure 1."
That way, if a bit of measure 1 disappears, it won't effect your audio since it'll be part of the empty measure before your content begins in measure 2.

Video doesn't start from the beginning

Please tell me there is a setting on the iPod classic to always start a video from the beginning of the video??!?!?! I am using the iPod classic for video projection.
E.g.: I play video #1 until, say, 3:00. I select menu and go to another video or a song, a photo, whatever. I go back to video #1 and it starts at 3:00! WHY?
I want iPod Classic videos to ALWAYS start from the beginning.
Please tell me there is a setting for this.
thank you

I have good news for you, (compared to your other post!).
Select the video in iTunes and click on *File/Get Info* and look on the Options tab. Turn off the tick in *Remember playback position.* You can bulk select some or all your videos to do this.
Phil

My iTunes doesn't start since the last update

I am using mac os x 10.7.4 and itunes 1.6.3. since this update itunes does not start anymore. What can I do ?

On Vista Home premium, uninstalling and reinstalling buth iTunes and Apple Applicatioon Support did NOT work for me.
What did work for me was manually copyting CoreVideo.dll from the Apple Application Support folder into my iTunes folders (actually, to both of them - under Program Files and Program Files (x86)) as per advice posted in a Windows forum, found after an hour or more of frustration and failure.
This appears to be a bug in the 10.1 installation scriptimng - what's going on?

Article doesn't start at the beginning...

Hello everyone,
I have created with Adobe Folio an app for iTunes. My problem is, when I move between the article once on my iPad, the Article doesn't jump back to the beginning it always starts where I have left the article. Even when i close the app completely and open it again, it jumps to the point where I have been before. I would like to start always at the beginning of an article, how can i fix this?
Thanks for your help

That's how it works. If you want to reset the folio you can do so by bring
up the nav bars and triple tapping the title.

Share to DVD doesn't start at the beginning

I have a multicam timeline that I am trying to share to DVD. When I test the created DVD it always starts at about 3/4 of the way into the movie. I have exported a master file and I created a DVD in Wondershare Ultimate Converter and it also starts 3/4 of the way into the movie (at the exact same place). I am therefore concluding that it is my timeline that is the causing the problem but I have no idea what to look for. Does anyone have any ideas?

Hi Slim!
Thanks for the reply. Your screen shot is attached but it is pretty small. The position of the playhead is where the DVDs always begin.
I can only think that there is something going on with the multicam editing. This is the first time I have used it so I may be doing something wrong. Is there some way to "set" the final as a non-multicam clip? I ask this because I tried your idea of making it into a compound clip. I selected all the elements (CMD-a) and then right-clicked and selected New Compound Clip. It did not recognize my cuts but included all of the entire clips. So, undaunted, I undid all of that and tried again. This time it only selected the proper cuts and I put it into a new project. However, the DVD burned from that new project didn't change the outcome.
The funny thing is that all of the quicktime files play correctly, so there is definitely something weird going on.
Taos is great! It is an unbelievably beautiful place. We haven't had much snow this winter, though, although the ski valley has been good, but they are at 9,000 feet and we are only about 7,000.
More ideas anyone?
Catherine
ps .. thanks for the other post but I am not getting that error. My piece is only 7 mins 40 secs and the share is completing.

Track doesn't start at the beginning

When I play a compilation, the 2nd track starts about 4 seconds in.
Anyone know why this is?

Ed, just a bit more follow up...since you seem to know.
Can you say more about what a "clean" mp3 is? vs one that isn't.
We are using a professional sound engineer who is creating the mp3 files from the ProTools original. I find his technical knowledge to be weak (he's a great sound guy) - and maybe he's creating the problem with the tool he's using to output the mp3.... your help would be appreciated!

Config Tool doesn't start from the application list

Hi all,
I have installed Planning, EAS, and Workforce on a server but when I go to configure the tools, the config tool doesn't start from the page where you select the applications to configure. Instead, it starts with all the apps listed with the message: "You have selected the above apps to configure" and it has a Back button but it doesn't work, and it has a Next button and when I press it, it says Done.
I need to configure the database and deploy to the application server.
The Shared services is on a different server and is up and running. Essbase is on a separate server and that's up and running.
I am working with 11.1.1.3 32 bit applications on a 64 bit Windows OS.
If you have run into this, please let me know what am I missing?
Thanks

Hi
First of all I couldnt get your problem as in your query description you have written "sometimes the video doesn't skips a couple of seconds from the beginning even though the value of NetStream.time property is 0" which is contradictory with the query title "Video doesn't start from the beginning".
But anyways I think you should check ns.time in Play.Start there you should get always 0 but in Buffer.Full there may be the case that ns.time is not 0 but has some value but that value is very small less than 1.
If still you have issue please clarify your problem then probably I will be able to answer your query.
Regards,
Amit

Downloaded songs don't start at the beginning of the song, why?

the songs i bought from itunes don't start at the beginning of the song, it's just the preview clip.

Been having the same problems myself. And I don't know about you but sometimes it'll take a while to get it to actually play the first song.

Opening iTunes shows an error- The program can't start because AVFoundationCF.dll is missing from your computer. Try reinstalling the program to fix this problem. ; Even after reinstalling iTunes doesn't start!

When I start the iTunes program it comes up with this.. pls help!!
"The program can't start because AVFoundationCF.dll is missing from your computer. Try reinstalling the program to fix this problem."
Even after reinstalling iTunes doesn't start!

Repair your Apple Application Support.
Control Panel > Programs n Features (Win7) or Add n Remove Programs(XP) > highlight AAS, click CHANGE then REPAIR.

After reinstalling game, the achievements from Game Center doesn't uploaded to the game and starts from the beginning . All the achievements are seen in the Game Center . How could I upload the last progress into the game?

After reinstalling game, the achievements from Game Center doesn't uploaded to the game and starts from the beginning . All the achievements are seen in the Game Center . How could I upload the last progress into the game?

Hello there, Elena Lyubina.
The following Knowledge Base article offers up some great steps for troubleshooting issues with an application not functioning as expected:
iOS: An app you installed unexpectedly quits, stops responding, or won’t open
http://support.apple.com/kb/ts1702
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

How do I make it so that itunes doesn't start automatically when windows starts?

How do I make it so that itunes doesn't start automatically when windows starts?

http://support.apple.com/kb/HT5449
http://support.apple.com/kb/PH11443
http://support.apple.com/kb/PH11428

My iTunes will not start. The box on the error message APSDaemon.exe, And message says "This application failed to start because MSVC80.dll was not found. Reinstalling may fix." I did the reinstall and I get the same error.

My iTunes will not start. The box on the error message APSDaemon.exe, And message says "This application failed to start because MSVC80.dll was not found. Reinstalling may fix." I did the reinstall and I get the same error. The error first happened after I approved the an iTurns update.

Same problem today. Took five times to reinstall without any error messages. Apple has posted a way to fix and you should follow their's first. I finally got to upldate correctly by doing their fix but with one difference. I did the following:
1) Went to the C:\program files (x86)\iTunes and C:\program files\iTunes folders and moved every file ending in .dll to the desktop (even if two files in same location had the same name, just replace)
2) Restarted computer and still got error message
3) Uninstalled all apple programs possible in the following order......itunes, apples software update, apple mobile device support, bonjour, and apple application support.....all performed using the microsoft control panel
4) put all the .dll files on the desktop in the trash and emptied (this is a step apple support did not specifically put in their fix but for a final try I wanted to delete everything apple).
5) Restarted computer.
6) Re-installed itunes from apple website
No error messages during re-install and was able to open shortcut in one try. Even updated my ipad to make sure everything was working.

How do I restart iOS download after internet crashes without having to start from the beginning.

My internet crashes and stops downloading the iOS restore software for my phone. When I try to restart the download, it starts from the beginning. How can I get it to cary on from where it left off? Why doesn't it do this automatically!?
Thanks.

If you've already unsuccessfully tried to resume the download then the previously partial download may no longer be present on you computer.<br />
What you can do in such a case is:
* Move the old .part partial download and the 0 byte final file without the .part to another location.<br />
* Start a new download and pause it, don't close Firefox.<br />
* Copy the two files (.part and 0 byte final) that you moved above back to the download location to replace the new files that were created.<br />
* Resume the download in Firefox.

My Itunes will not start after the latest update. I keeo getting error message tEventType : InPageError P1 : c000009c P2 : 00000003 . I have tried to reinstall but no joy. Any advise?

My Itunes will not start after the latest update. I keeo getting error message tEventType : InPageError P1 : c000009c P2 : 00000003 . I have tried to reinstall but no joy. Any advise?

'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Last reading restart ... iTunes doesn't start by the beginning Oô

Similar Messages

Maybe you are looking for