Last Run status of Report is not showing in Infoview

Post Author: mega-bo
CA Forum: Authentication
Hey,
Infoview is not showing the Last Run status of the Report. It is always showing 'Never Run' as a status.
Any idea how to get the Last Run info?
Cheers!

Post Author: TAZ
CA Forum: Authentication
I believe this setting is a bit misleading, last run doesn't mean the last time you accessed the reoprt or ran on - demand. It's used for the last time you scheduled a report. If you schedule the report to run now and then check back after it was run the date should change.
Regards,
Tim

Similar Messages

WT reporter does not show split for tax authorities!

Dear all:
I need to report for all employees some WTs of taxes, but wt reporter does not show the splits for them (to distinguish federal from statal authorities payments), it is like summarises all the same WTs... I tried payroll recon. report but this one does not output the data in ALV format (im in 4.6 version) so it is not useful to run in bulk
Do you have any work around for this?
I would appreciate any tip or workaround on this,
Thank you!

Hi
1. Allocated costs are always treated as Fixed costs, unless you have booked the expenses in FI using Activity Type as Aux Account assignment object
2. Check whether these costs are included in Inventory valuation in your Cost Comp Str in OKTZ... If not relevant for inv valuation, these costs wont show up for Variance calculations
br, Ajay M

Crystal report Viewer Not Showing Control Bar Button Icons

Hi
I am using Crystal report along with .net 2003 in web application.
While executing, the report its not showing any errors,but the control bar buttons(print, export, next page last page, previous page, first page, etc ) are showing without there icons.
These invisible buttons can be found by placing the mouse over the specified area, then it shows the tool tip like print etc.
Please give me solution.

Would you like to have a look at these:
[1.|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bip/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233303336333633373339%7D.do]
[2.|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333133383333333933313333%7D.do]
[3.|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_dev/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233303332333533323337%7D.do]
[4.|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_dev/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313338333733363334%7D.do]
[5.|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_dev/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313336333333303335%7D.do]
[6.|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bip/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333133393338333833393338%7D.do]
Hope this helps!
AG.

SQL MP Job Last Run Status Monitor doesn't alert

Hi Guys,
Last run Status Monitor in SQL MP that checks the last run status of agent jobs and generates alerts is not generating any alerts in SCOM. Although we had overrided the monitor to trigger the alerts.
Jobs are discovered under SQL agent Job state view and state changes to warning as well but no alerts at all.
Please guide.
Regards,
Daya Ram

Hi!
Enable "Generates Alert" by override.
Set "Alert On State" to "The monitor is in a warning health state" by override.
Optionally change the "Alert severity" so that it matches the health state.
Set "Auto-Resolve Alert" to true by override.
Cheers,
Patrick
Please remember to click “Mark as Answer” on the post that helped you.
Patrick Seidl (System Center and Private Cloud)
Website: http://www.syliance.com
Blog: http://www.systemcenterrocks.com

Last Used status for Reports, Transactions, Tables ??

Dear all,
Kindly let me know how to find the last used status for
Reports, Transactions, Tables ??
This is very urgent, Please do the needful.
Waiting for the responses..
Cheers,
Virendra.

Here the issue is same.
STAT transaction is asking for the time which is the main hurdle.
I am hanging around with STAT transaction but not finding
how to getover the time specification.
if i dont specify the time i takes by default the 2 or minutes back from the current time.
which is not useful for me at all.
My main requirement is that my seniors want to know what are all reports or transaction or tables which are not used at what last time ?
so if i have to specify the time wont be so useful for me.
And writing a report 'll not gain anything coz internal SAP report is take time as main parameter.
Regards,
Virendra.

Crystal Report Images Not Showing - JSP inside /WEB-INF folder

Hi Experts,
I am using Crystal report for Eclipse and also using Struts2 and tiles framework combination.
The problem is when viewing the report all I've got is red X on all images and the graph image also not showing. This is when I use tiles and my jsp is inside the web-inf folder.
This is my struts link: href="s:url value='/report/reportOpen.action?report=1'
I've checked that the path to the viewer generated HTML is not correct. see code below.
src="../../../crystalreportviewers/js/crviewerinclude.js"
But when I test to access a simple jsp viewer that resides on the web root folder, this works fine but of course this is not what I want to have. I need to have my banner and menus on top of the report page (using tiles)
This is my jsp link: href="s:url value='/ReportViewer.jsp?report=1'
Viewer generated HTML below.
src="crystalreportviewers/js/crviewerinclude.js"
This might be a common problem and that you can share to me your solution.
Note: I removed the script tags because I can't submit this entry.
Thank you in advance,
Regards,
Rulix Batistil
Crystal Report Images Not Showing - JSP inside /WEB-INF folder

Hi Saravana,
After a few experimentation from your idea i was able to figure out the problem and now it is working.
I don't have to copy the folder to where my jsp resides but still maintains it in the root location: web/crystalreportviewers
The changes should always be in web.xml.
1st: change the crystal_image_uri value to ../crystalreportviewers
2nd: change crystal_image_use_relative value to "web"
Change to "web" instead of webapp because that is what I named my web root folder.
<context-param>
          <param-name>crystal_image_uri</param-name>
          <param-value>../crystalreportviewers</param-value>
     </context-param>
     <context-param>
          <param-name>crystal_image_use_relative</param-name>
          <param-value>web</param-value>
     </context-param>
Thank you. You showed me the way on how to solve the 3 day problem.
BTW, my next problem is when clicking on any buttons prev/next/print/export, I got this error HTTP Status 404.
Well, at least for now I can view my initial report. I just need to figure out the next issue and with the help of the great people here in the forum.
Thanks a lot.
Regards,
Rulix
Edited by: Rulix Batistil on Nov 26, 2008 7:27 AM

BI publisher report is not showing all the data

Hi All,
I have created a report using BI Publisher in R12. The report is not showing all the records.
I have checked the result XML it is also not having all the data. My query returns 846 rows but my report only has 662 rows.
what might be the issue.please give me some idea to resolve this issue.
Thanks in advance.
Regards,
P.Kalidoss

Hi Arun,
In the following code: public SelectItem[] getAllPrinters() {
if (allPrinters == null) { // allPrinters is not defined. what type of object it is
PrintService[] printers = PrintServiceLookup.lookupPrintServices(null, null);
allPrinters = new SelectItem[printers.length];
for (int i = 0; i < printers.length; i++) {
SelectItem printer =
new SelectItem(printers.getName(), printers[i].getName());
allPrinters[i] = printer;
return allPrinters;;;
Variable allPrinters is not defined. what type of object it is?
And also the same variable is referenced here <af:selectOneChoice label="Available Printers" partialTriggers="cb1"
value="#{pageFlowScope.applicationPrinterBean.selectedPrinter}"
id="soc1"
autoSubmit="true">
<f:selectItems value="#{pageFlowScope.applicationPrinterBean.allPrinters}" id="si1"/>
</af:selectOneChoice>.
Thanks.

Report does not show Quotation price

Dear friends,
What may be the reason, that my report does not show the quiotation price, though Sales order price, revenue price shows normal?
Please give some probabilities.
Rao

check your plan profile OPSB if automatic rev planning for both Quotation and Sales order is ticked

Bex report does not show loaded data at once

Hi experts,
Why Bex report does not show loaded data at once after loading is finished but after some time?
Could be the reason of it:
a) huge amount of data in infocube.
b) there are no deleting/creating indexes before/after loading, because it takes too much time
c) anothe reason?
Thank you,
Tigr_Z

Hi Tigr,
A and B both can be the reasons behind, but normally in case of B option the results on report output can be wrong like duplicates sort of showing you double figures.
C - it can be resource issue, so please look into all and double check with basis if thats the case.
Regards
Sunny

I have Lightroom 3 and have installed it on my Retina iMac running Yosemite. It will not show me any of the modules..error when attempting to change modules.. and keeps asking for my serial number every time. Is it compatible?

I have Lightroom 3 and have installed it on my Retina iMac running Yosemite. It will not show me any of the modules..error when attempting to change modules.. and keeps asking for my serial number every time. Is it compatible?
David

This is a duplicate thread - see here

Office Telemetry Agent Last Run Result 0x800700005 and machines not reporting back in the Telemetry Dashboard

We have had the Office Telemetry Dashboard setup for a while now as part of our Office 2013 evaluation and it currently reports back on 117 Computers which roughly matches up with the number of agents we have deployed. However, I have recently discovered
that some computers do not show up on the dashboard when searching under either their computer name or username. Having looked locally at these machines they report a Last Run Result code of 0x800700005 on the Task Scheduler. Not exactly sure what this
means as I know its a fairly generic code. I can run the telemetry dashboard locally on the effected machines and all appears ok. I have looked at the main Telemetry Processor Log file on our server (%windows%\ServiceProfiles\NetworkService\AppData\Local\Temp\dperrorlog.txt)
and can see there are quite a few machines reporting that Office Telemetry Processor deleted the folder \\ServerName\SharedFolderName\ComputerNameReference because the files in the folder haven't been uploaded for more than 2 hours. I tried googling this error
but got nothing back.
The machines in question are running Windows 7 Enterprise SP1, Office 2013 and the telemetry agent is configured through Group Policy. We also have a number of Office 2007 clients
running the agent but I have not yet checked to see if any of these ones are not reporting back.
Can anyone help troubleshoot this issue further to try and establish why some machines are not showing up in the dashboard logs. I have gone through the troubleshooting info here http://technet.microsoft.com/en-us/library/jj219431.aspx#tshooting
but so far can't find a solution.
Thanks.

I tried running the agent as admin and it returned a last run result of 0x41301 which I believe means the Task is currently running but its been like this for several days with nothing being reported back yet.
For all the other agents that appear to be running fine they show up on the dashboard with each non-admin username which is what we need to run reports based on individual users so I cant understand why this would be a permissions problem. The permissions
on the shared folder were setup using the automated option when installing the telemetry processor on the server. I have tried just adding in one of the problem users to have full control to see if this makes a difference but have not tested this yet.
Anyone have any tips on troubleshooting the DPErrorLog file? There doesn't appear to be much out there in the way of documentation for this stuff. Is anyone else using the Telemetry Dashboard successfully as part of their Office 2013 evaluation?
Thanks.

Incomplete Data on report (report does not show all records from the table)

Hello,
I have problem with CR XI, I'm running the same report on the same data with simple select all records from the table (no sorting, no grouping, no filters)
Sometimes report shows me all records sometimes not. Mostly not all records on the report. When report incomplete sometimes it shows different number of records.
I'm using CR XI runtime on Windows Server 2003
Any help appreciated
Thanks!

Sorry Alexander. I missed the last line where you clearly say it is runtime.
A few more questions:
- Which CR SDK are you using? The Report Designer Component or the CR assemblies for .NET?
- What is the exact version of CR you are using (from help | about)
- What CR Service Pack are you on?
And a troubleshooting suggestion:
Since this works on some machines, it will be a good idea to compare all the runtime (both CR and non CR) being loaded on a working and non working machines.
Download the modules utility from here:
https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip
and follow the steps as described in this thread:
https://forums.sdn.sap.com/click.jspa?searchID=18424085&messageID=6186767
The download also includes instructions on how to use modules.
Ludek

Report does not show updated data

Hi,
We are currently testing our AV implementation.
AV server, agent and collectors are up, but the reports are not being updated.
Reports are showing data as of Dec-22-2009, which is when the last time the unix servers (for both AV and source dbs) were rebooted.
We can see collection is happening:
SQL> select max(av_time) from avsys.av$rads_flat;
MAX(AV_TIME)
19-JAN-10 12.34.41.150446 PM
But the dw table is not being updated:
SQL> select max(av_time) from avsys.audit_event_fact;
MAX(AV_TIME)
22-DEC-09 04.58.55.255456 PM
Does anybody have any idea?
thank you

hi Karun,
correction, there are a couple of trace files after the db was restarted prior to starting AV and the collectors.
below are the message content:
trace file #1)
Instance name: AVDB
Redo thread mounted by this instance: 0 <none>
Oracle process number: 0
Unix process pid: 24635, image: oracle@audit1
Dynamic strand is set to TRUE
Running with 2 shared and 48 private strand(s). Zero-copy redo is FALSE
trace file #2)
Instance name: AVDB
Redo thread mounted by this instance: 1
Oracle process number: 30
Unix process pid: 24922, image: oracle@audit1 (TNS V1-V3)
*** ACTION NAME:() 2010-01-19 14:39:46.215
*** MODULE NAME:(sqlplus@audit1 (TNS V1-V3)) 2010-01-19 14:39:46.215
*** SERVICE NAME:(SYS$USERS) 2010-01-19 14:39:46.215
*** SESSION ID:(213.1) 2010-01-19 14:39:46.215
kwqmnich: current time:: 22: 39: 46
kwqmnich: instance no 0 check_only flag 1
kwqmnich: initialized job cache structure
what could this mean?
thank you!

ALV GRID Report is not showing all records which is in internal table

hi all,
have one doubt. please clarify me. ALV Report is working fine since long tiem. But suddenly this report is showing few records only for the given input.   Example:   it_main table have 50 records, but output is showing only 10 records only. (we have not made any modifications in this report).
temporarily i have given excel output file from it_main table. excel file is showing all records.
here it_main have all the records. but output is showing few records only. it is not showing any error. i have tested with REUSE_ALV_LIST_DISPLAY function also. but it also showing same results(few records only.)
please give me some idea.
FORM display_alv_report.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_buffer_active          = 'X'
      i_callback_program       = sy-repid
      is_layout                = wa_layout
      it_fieldcat              = it_fcat
      it_events                = it_events
      i_save                   = 'A'
      is_variant               = wa_variant
    TABLES
      t_outtab                 = it_main
    EXCEPTIONS
      program_error            = 1
      OTHERS                   = 2.
IF sy-subrc <> 0.
    MESSAGE text-204 " 'Error in Display the list'
    TYPE 'I'.
    LEAVE TO LIST-PROCESSING.
ENDIF.
ENDFORM.            .                    "DISPLAY_ALV_REPORT
Best Regards,
Srinivas

hi
Please study this program and give me suggestions.
ALV Declaration
DATA : it_events TYPE slis_t_event,               "ALV event
           it_fcat   TYPE slis_t_fieldcat_alv,        "Field catalog
           it_list_top_of_page TYPE slis_t_listheader,
           c_tabname TYPE slis_tabname   VALUE 'IT_MAIN'.
DATA : wa_layout TYPE slis_layout_alv,
            wa_event   TYPE slis_alv_event,
           wa_fcat    TYPE slis_fieldcat_alv,
           wa_variant TYPE disvariant.
START-OF-SELECTION.
PERFORM material_pass.
PERFORM data_retrieval.
END-OF-SELECTION.
PERFORM sub_display_report.
FORM sub_display_report .
DATA status(1).
IF r1 = 'X'.
    PERFORM build_fieldcatalog USING :
      '1' 'ERDAT'     'S.O DATE'             '' '10' 'X',
      '2' 'VBELN'     'SALE ORDER'           '' '10' 'X',
      '3' 'POSNR'     'SALE ITEM'            '' '6'   '',
      '4' 'BSTKD'     'CUSTOMER PO'          '' '35' '',
      '5' 'BEZEI'     'REASON FOR REJECTION' '' '40' '',
      '6' 'PLNUM'     'PLANNED ORDER'        '' '10' '',
      '7' 'AUFNR'     'PROD.ORDER.'          '' '12' '',
      '8' 'MATNR'     'MATERIAL NUMBER'      '' '18' '',
      '9' 'MAKTX'     'MATERIAL DESCRIPTION' '' '40' '',
      '10' 'WERKS'     'PLANT'                '' '4'   '',
      '11' 'KWMENG'    'SALE ORDER QTY'       '' '15' '',
      '12' 'VRKME'     'UNIT'                 '' '4'   '',
      '13' 'GAMNG'     'PROD.ORDER QTY'       '' '13' '',
      '14' 'IGMNG'     'CONFIRMED ORDER QTY' '' '13' '',
      '15' 'GMEIN'     'UNIT'                 '' '4'   '',
      '16' 'MENGE'     'G.R QUANTITY'         '' '13' '',
      '17' 'SOBAL'     'S.O BALANCE'          '' '13' '',
      '18' 'PRDBAL'    'PROD.BALANCE'         '' '13' '',
      '19' 'GSM'       'GSM'                  '' '4'   '',
      '20' 'SIZE1'     'SIZE1'                '' '10' '',
      '21' 'SIZE2'     'SIZE2'                '' '10' ''.
    CALL FUNCTION 'GUI_DOWNLOAD'
      EXPORTING
        filename              = pathname
        filetype              = ftype
        append                = 'X'
        write_field_separator = 'X'
      TABLES
        data_tab              = it_mains
      EXCEPTIONS
        file_write_error      = 1.
    IF sy-subrc = 0.
      status = 'S'.
    ELSE.
      status = 'E'.
    ENDIF.
ELSEIF r2 = 'X' OR r3 = 'X'.
    PERFORM build_fieldcatalog USING :
      '1' 'ERDAT'     'S.O DATE'             '' '10' 'X',
      '2' 'VBELN'     'SALE ORDER'           '' '10' 'X',
      '3' 'POSNR'     'SALE ITEM'            '' '6'   '',
      '4' 'BSTKD'     'CUSTOMER PO'          '' '35' '',
      '5' 'BEZEI'     'REASON FOR REJECTION' '' '40' '',
      '6' 'PLNUM'     'PLANNED ORDER'        '' '10' '',
      '7' 'AUFNR'     'PROD.ORDER.'          '' '12' '',
      '8' 'MATNR'     'MATERIAL NUMBER'      '' '18' '',
      '9' 'MAKTX'     'MATERIAL DESCRIPTION' '' '40' '',
      '10' 'WERKS'     'PLANT'                '' '4'   '',
      '11' 'KWMENG'    'SALE ORDER QTY'       '' '15' '',
      '12' 'VRKME'     'UNIT'                 '' '4'   '',
      '13' 'GAMNG'     'PROD.ORDER QTY'       '' '13' '',
      '14' 'IGMNG'     'CONFIRMED ORDER QTY' '' '13' '',
      '15' 'GMEIN'     'UNIT'                 '' '4'   '',
      '16' 'MENGE'     'G.R QUANTITY'         '' '13' '',
      '17' 'SOBAL'     'S.O BALANCE'          '' '13' '',
      '18' 'PRDBAL'    'PROD.BALANCE'         '' '13' '',
      '19' 'GSM'       'GSM'                  '' '4'   '',
      '20' 'SIZE1'     'SIZE1'                '' '10' '',
      '21' 'CUT1'      'CUT1'                 '' '11' '',
      '22' 'SIZE2'     'SIZE2'                '' '10' '',
      '23' 'CUT2'      'CUT2'                 '' '11' '',
      '24' 'SIZE3'     'SIZE3'                '' '10' '',
      '25' 'CUT3'      'CUT3'                 '' '11' '',
      '26' 'SIZE4'     'SIZE4'                '' '10' '',
      '27' 'CUT4'      'CUT4'                 '' '11' '',
      '28' 'SIZE5'     'SIZE5'                '' '10' '',
      '29' 'CUT5'      'CUT5'                 '' '11' '',
      '30' 'SIZE6'     'SIZE6'                '' '10' '',
      '31' 'CUT6'      'CUT6'                 '' '11' ''.
    CALL FUNCTION 'GUI_DOWNLOAD'
      EXPORTING
        filename              = pathname
        filetype              = ftype
        append                = 'X'
        write_field_separator = 'X'
      TABLES
        data_tab              = it_mainall
      EXCEPTIONS
        file_write_error      = 1.
    IF sy-subrc = 0.
      status = 'S'.
    ELSE.
      status = 'E'.
    ENDIF.
ENDIF.
PERFORM build_layout.
PERFORM build_events.
PERFORM sub_comment_build USING it_list_top_of_page.
PERFORM sub_set_variant.
PERFORM display_alv_report.
IF status = 'S'.
    MESSAGE 'Excel Output file Downloaded to Given Path' TYPE 'I'.
ELSE.
    MESSAGE 'Download Not Possible' TYPE 'I'.
ENDIF.
ENDFORM.                    " SUB_DISPLAY_REPORT
FORM BUILD_FIELDCATALOG
FORM build_fieldcatalog USING p_col_pos
                               p_fieldname
                               p_text
                               p_datatype
                               p_outputlen
                               p_col_freez.
wa_fcat-row_pos        = '1'.
wa_fcat-col_pos        = p_col_pos.
wa_fcat-fieldname      = p_fieldname.
wa_fcat-tabname        = c_tabname.
wa_fcat-reptext_ddic   = p_text.
wa_fcat-datatype       = p_datatype.
wa_fcat-ddic_outputlen = p_outputlen.
wa_fcat-key            = p_col_freez.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ENDFORM.                    " BUILD_FIELDCATALOG
*&      Form BUILD_LAYOUT
FORM build_layout.
CLEAR: wa_layout.
wa_layout-window_titlebar   = 'LIST OF GSM WISE OPEN SALE ORDERS'.
wa_layout-colwidth_optimize = 'X'.
wa_layout-totals_text       = 'CUMULATIVE'.
ENDFORM.                    "BUILD_LAYOUT
*&      Form BUILD_EVENTS
FORM build_events.
CLEAR wa_event.
REFRESH it_events.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
    EXPORTING
      i_list_type     = 0
    IMPORTING
      et_events       = it_events
    EXCEPTIONS
      list_type_wrong = 1
      OTHERS          = 2.
IF sy-subrc = 0.
    READ TABLE it_events INTO wa_event
         WITH KEY name = 'TOP_OF_PAGE'.
    IF sy-subrc EQ 0.
      wa_event-form = 'TOP_OF_PAGE'.
      APPEND wa_event TO it_events.
      CLEAR wa_event.
    ENDIF.
ENDIF.
ENDFORM.                    "BUILD_EVENTS
     -->P_IT_LIST_TOP_OF_PAGE text
FORM sub_comment_build USING it_top_of_page TYPE slis_t_listheader.
DATA ls_line TYPE slis_listheader.
CLEAR ls_line.
ls_line-typ = 'H'.
ls_line-info = str1.
APPEND ls_line TO it_top_of_page.
CLEAR ls_line.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
   EXPORTING
     it_list_commentary = t_header[].
ENDFORM.                    " SUB_COMMENT_BUILD
*&      Form SUB_SET_VARIANT
      text
--> p1        text
<-- p2        text
FORM sub_set_variant .
CLEAR wa_variant.
wa_variant-report = sy-repid.
wa_variant-username = sy-uname.
wa_variant-variant = c_variant.
wa_variant-variant = p_layout.
ENDFORM.                    " SUB_SET_VARIANT
*&      Form DISPLAY_ALV_REPORT
*Display Report Using ALV GRID
FORM display_alv_report.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_buffer_active          = 'X'
      i_callback_program       = sy-repid
     i_callback_pf_status_set = c_pf_status
     i_callback_user_command = c_user_command
      is_layout                = wa_layout
      it_fieldcat              = it_fcat
     it_sort                  = it_sort[]
      it_events                = it_events
      i_save                   = 'A'
      is_variant               = wa_variant
    TABLES
      t_outtab                 = it_main
    EXCEPTIONS
      program_error            = 1
      OTHERS                   = 2.
IF sy-subrc <> 0.
    MESSAGE text-204 " 'Error in Display the list'
    TYPE 'I'.
    LEAVE TO LIST-PROCESSING.
ENDIF.
ENDFORM.            .                    "DISPLAY_ALV_REPORT
*ALV Report Header
FORM top_of_page.
DATA : t_header TYPE slis_t_listheader WITH HEADER LINE,
         wa_header TYPE slis_listheader,
         t_line LIKE wa_header-info,
         ld_lines TYPE i,
         ld_linesc(10) TYPE c.
wa_header-typ = 'H'.
T_HEADER-INFO = 'LIST OF GSM WISE OPEN SALE ORDERS'.
wa_header-info = str1.
APPEND wa_header TO t_header.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      it_list_commentary = t_header[].
ENDFORM.                    "TOP_OF_PAGE
here it_main internal table having all data. but output is showing few records only.
pl. give some idea.
Thanks & Regards
Srinivas.

Report does not show the main section while calling from forms 6i

Hi
I am running report from report from forms 6i but is does not show the data in main section, where as the data in the header section is ok.
But when i run the same report independantly from report builder it show the both header and main section with relevent data.
pl solve the matter
thanks in advance

can you tell me more about this, you might check if you are using different users when you call this report or if the user has all privileges to see all tables in this report

Last Run status of Report is not showing in Infoview

Similar Messages

Maybe you are looking for