Last Skipped Date, Skip count, are not updated in any songs that i listen in my iPhone5s

I've been using smart playlist that's relays on the play count, last skipped date and skipped count fields... I have been using an old ipod to heard my music through this smart playlist that live updates all the time and it was working great.
So my issue is, since i bought a new iPhone 5S and start using it to listen music, my smart playlist that relays on " play count, last skipped date, skipped count " fields are not updating, and when i connect my iphone to the PC i realize that those fields never update after i play or skip any song in my iPhone.
So, I'm not sure if this is an iPhone restriction, that i need to use my iPod again to get my smart playlist that relys on those fields to work... or my iphone is defective and need to re-install the iOS.
Any help on this matter will be enormously appreciated
Thanks in advance

I have playlists that rely on the Last Skipped and
Skip Count properties of songs, but these items only
seem to be triggered if the song is fast forwarded
between 3-20 seconds into the song. I tried to skip
I think this is how it's intended, though there isn't much info on this feature. I've seen the same behavior and other users have reported same.
One thing that threw me off for a bit using this feature was trying to use with playlists where the songs had "remember playback position" checked. Last skipped doesn't register at all with these tracks.

Similar Messages

Last Logon date and Logon time not updating in table USR02

Hi,
Please help us on this. After customer successfully logged in the webshop, we are checking the table USR02 in CRM system and the Logon date and Logon time is not updated. Because of this, the customer will be locked after certain number of days. When we check it in ECC system, customer's last logon date and time is updated. Can you tell us what could be causing this? Any advise what we need to check? Thanks in advance!
Regards,
Mike

Hi
1. Please check if the USAPPLREF table in ECC has the correct mapping done between the LOGON User and the Sold-to party (Customer)
2. Please check the validity of those user in SU01 user data.
3. Please check the USERS data from the USERADMIN Link (if it is configured in your scenario through XCM settings for USERS)
Hope this will help.
Regards

Deletion of Request which are not updated to data target

hi,
I want to all PSA data whether it is updated or not In our project this is being done by Using a Process chain, But it is not deleting the request which are not updated to any data target or failed, I have selected both the check boxes
Only successfully booked requests
Only requests with errors, not updated in any data target
but even after selecting this check box it is not deleting the failed request, can any one tell me why it is so.
Any help in this would be highly appreciated.

Try to do it without checking any of the checkboxes...
Regards,
Luis

Changes to BI web templates are not updated

Hello BI Experts,
I need to find a way to advise my portal resource on how to resolve a problem we are experiencing.
When we make a change to a web template, the changes are not updated and it appears that the old version is cached. The only way we can get the new template to show is to bounce EP.
Does anyone have suggestions where we can find the appropriate global settings to set the cache so that EP will retrieve new BI content as it is modified?
Thanks in advance for any help.
Tom

Hi Tom,
If there is some incorrect setting in the portal, the WAD templates does not get saved after the first Save action.
I am not sure of the setting which needs to be done. But I can provide you an alternate solution. If there is no other issue than the templates not getting saved, you can use this.
You can save your changed template using 'Save As' in a different name and then you can delete the original template. Afterwards, you can save this template with the actual name.
I hope this would solve your problem.
Regards,
-Neethu

Document from last posting run in 2007 are not yet updated

Hi Guru's,
When I run the AJRW fiscal year change 2009, it was not successful because a system message says" fiscal year change in company code XXX, possible only after year end closing 2007.
So I execute AJAB-Year End closing in 2007, in Tab " Closed Carried Out - it say "NO", when i double click it says: "Document from last posting run in 2007 are not yet updated"
So i check it in SM35 to see when did this error started, i found out it started at around mid 2007, July, status is In background instead of Processed. Out of 15 thousand transaction, 14 of which got an error.
Please help how we are able to post asset accounting for 2009.
Thanks
Mila
Edited by: Mila Calonge on May 4, 2009 10:02 AM

check the error log why the transactions are not processed. Recreate the session with transaction code AFBD giving the year and fiscal period and check the error log. It will give the clue why the transactions are not processed.
Those might not have processed due to GL account assignment or cost center master data issues.

I purchased an unlocked iPhone4 last month. Everything was fine till yesterday. Today morning when I tried to check mail, i suddenly got an error message saying " Could not activate cellular data network: you are not subscribed to a cellular data service"

I purchased an unlocked iPhone4 last month. Everything was fine till yesterday. Today morning when I tried to check mail, i suddenly got an error message saying " Could not activate cellular data network: you are not subscribed to a cellular data service", when I checked on my network settings i was not able to find the cellular data network tab ( where we use to input APN manually). i even tried to restore my iPhone to its factory settings, Still it remains the same. i cant able to connect to Internet using cellular data. help me...Plz..

Where did you purchase it from? There are lots of iPhones sold as "unlocked" which are carrier locked phones that were hacked and are not officially unlocked. These phones are subject to re-locking to the original carrier, particularly when updated.

HT4623 Hi. After I updated ios6, I couldn't use my cellular network. It said "could not activate cellular data network - You are not subscribed to a cellular data service". I don't know why. My iphone is 4s

Hi. After I updated ios6, I couldn't use my cellular network. It said "could not activate cellular data network - You are not subscribed to a cellular data service". I don't know why. My iphone is 4s

Contact your carrier to ensure data access via their network is provisioned properly for your account and iPhone with the new iOS 6 update installed.

Data Migration Opening Balances are not updating in the Report F.08

Hi,
We have uploaded the GL balances in 2008 for the year 2007. But they are not updating in the F.08 report when i executed for 2008.
Why they are not updating in the report. In which table can i check the Data migration values in the system?
Thansk
Kishore

Hi We have uploaded all the values in 2008 with 2008 date. fiscal year is K4.
F.08 Report for the year 2008 is showing only 2008 accumulated values. But not showing the Opening balances which we have uploaded in 2008 for the before years like 2007.
Why it is showing like that?
Thansk
kishore

Recordmode data are not updated correctly

We currently have an issue while using the 3.x data flow in BI 7.0. The same also holds with 3.x versions of BI.
Suppose you have an ODS sending data in an InfoCube. When you initialize the delta process with data transfer then the recordmode field in the communication structure contains null values even though in the change log table of the ODS it has values. This behaviour does not hold when you send further data with deltas.
We want the recordmode data to be updated correctly since we use them in a condition. Does anybody know about this problem?
Best regards
Theodoros

Hi again,
the problem is also not related with any kind of mapping. We are just sending some data from an DSO to an InfoCube. Recordmode values are maintained correctly in the change log table of the DSO. Nevertheless, they are not updated correctly in the InfoCube's update rules communication structure unless we are uploading deltas. My question is why they are not updated also correctly when we are doing an initialization of the delta with data transfer.
Thanks anyway
Theodoros

After editing file in ACR 8.6 (Mac) , the file (NEF and XMP) modification dates are not updated

With both my Mac's, reset Photoshop C (2014) to previous version 2014.0. Now find that after editing file in ACR 8.6 (Mac) , the file (NEF and XMP) modification dates are not updated. Reloaded camera raw, etc., but still find modification dates are not updated, either using Finder or using Bridge to view dates. Editing other files, PSD, DNG, TIFF, etc., are updated and the information is correctly displayed.

Ok, not entirely sure what I did but it's now working (Bizarre!). The only thing I did was 'eject' the ACR 8.6 .dmg file from the finder side bar and restart PS CC, so that may have been where I was going wrong all along!
However, I now have another issue in that there is no preview of the shot in Finder on my iMac when I highlight the NEF file. I assume this is simply because Apple haven't yet released an update for the new D810 NEF files and so the computer doesn't know what it's looking at?!?
If anyone has any other ideas though, then I'm more than willing to listen.
Thanks again.

KSPP -Scheduled Activity are not updated for last 2 periods

Hi All,
When we run KSPP by using LTP, noticed that for one cost center and activity type the plan scheduled Acivities are not updated for last 2 period's.(shows Zero)
Do we miss any thing.
Regards,
Raj

Hi,
It can be due to the sales demand you have uploaded and the Lead time in the material master
because of the that, the demand gets shifted before (say, Dec demand gets shifted for manufacturing in October) and the activity qty in the last month comes zero
So, upload 14 months demand where 13 and 14th month is the same as 12th month... Most of the companies do this way
Ajay M

System status NTUP (Dates are not updated)

Hi Guys,
WBS Element has the system status NTUP (Dates are not updated) the option to untick this is greyed out and it is preventing the posting of a journal.
Could you please let me know how to remove this system status.
Regards,
Abdul Rehman

Hi Amit,
Thanks for your reply,
WBS is released and there is no user status as well but besides NTUP another system status is there i.e ACPT(Order accepted) is this is causing any problem for genral postings?
Could you please also let me know how status NTUP got activated when i am checking in the change log it is not showing any name.
WBS is very much an account assignment element.
Regards,
Abdul Rehman.

Play counts and "Last Played" not updating on short songs?

It looks like a lot of people have had trouble with play counts not updating with crossfade turned on. I've never used crossfade, so this doesn't bother me. However, I do have a plethora of very short tracks in my library (owing to there being many video game soundtracks with short fanfares as tracks), and I've noticed that when playing any song that's 10 seconds or less, it will show up in the "History" tab of "Up Next", but "Plays" and "Last Played" remain the same. Any other song in my library, whether it's 11 seconds long like "Got a Star Piece (part 1)" from "Super Mario RPG" by Yoko Shimomura or 11 minutes long like "I Am" from "As the World Bleeds" by Theocracy, will update its play count properly when played. Why is 10 seconds enough time to play a song and add it to my history, but not enough time to update when I last played it and make it appear in the smart playlist of recently played songs? Is iTunes 11 so obsessed with 11 that if a song isn't 11 seconds long, it doesn't consider it to be worth tracking?

I am having this exact same issue in iTunes 11 running on OSX 10.6.8.
Short tracks (less than 10sec) do not update their metadata to increase the play count. However if I play a short track on my iPod or iPhone and then sync with iTunes the play count and last played info is updated.
This really messes up my smart playlists that use playcount limiters.
I hope there is a fix for this soon.

2LIS_02_S896 issue : Records are not updated into BW

Hi
->We use 2LIS _ 02 _ SCL extractor to pass PO's to BW with delta.
->Works fine until the last week ,
->But on a particular date ( 15.05.2007) some of the records are not updated in BW.They are even not found at PSA level itself
->For eg for a material X there are two entries found in R/3 ( MB51 ) for the same posting date, now one of them is picked in BW (PSA level ) and other is not.
->There was no load fail / delta fail in BW and there is no exit written for this.
->Records are not updated in RSA3.
Let me know how this issue can be fixed.Its urgent.
Thanks,
Jilani

Hi Gagan,
Kindly check if you have any selection restrictions in your infopackage.
Regards.

Problem in pricing conditions are not updated in BAPI_SAG_CHANGE

Hallo Friends,
we have faced the one problem with the standard bapi *BAPI_SAG_CHANGE.
we have passed the 10 item level data to the BAPI_SAG_CHANGE , the bapi BAPI_SAG_CHANGE successfully updated the 10 item level data to the schedule agreement .
the problem is pircing condtions are not updated succesfully for the each items in the schedule agreement.
please suggest the good solution.
thanks
kumar

Hi jons,
Thanks for respoding my request, Please find my below code lines
CALL FUNCTION 'BAPI_SAG_CHANGE'
        EXPORTING
          purchasingdocument           = st_header-number
          header                       =           st_header
          headerx                      = st_headerx
        VENDOR_ADDRESS               =
        HEAD_EXPORT_IMPORT           =
        HEAD_EXPORT_IMPORTX          =
        TESTRUN                      =
        TECHNICAL_DATA               =
     IMPORTING
        EXP_HEADER                   =
        EXP_HEAD_EXPORT_IMPORT       =
       TABLES
                return                = st_return
Begin of modify by kirankumar 07/12/2009
               item                  = st_item
                 item                  = st_item[]
End of modify by kirankumar 07/12/2009
                itemx                 = st_itemx[]
                account               = st_account
     accountprofitsegment = st_accountprofitsegment
                accountx              = st_accountx
                schedule              = st_schedule
                schedulex             = st_schedulex
                sc_component          = st_sc_component
                sc_componentx         = st_sc_componentx
                shipping              = st_shipping[]
                shippingx             = st_shippingx[]
     shipping_exp          = st_shipping_exp
                delivery_address      = st_delivery_address
                item_cond_validity    = st_item_cond_validity[]
                item_cond_validityx   = st_item_cond_validityx[]
                item_condition        = st_item_condition[]
                item_conditionx       = st_item_conditionx[]
                item_cond_scale_value = st_item_cond_scale_value
                item_cond_scale_quan = st_item_cond_scale_quan
                export_import         = st_export_import
                export_importx        = st_export_importx
                item_text             = st_item_text
                header_text           = st_header_text
                head_cond_validity    = st_head_cond_validity
                head_cond_validityx   = st_head_cond_validityx
                head_condition           = st_head_condition
                head_conditionx       = st_head_conditionx
                head_cond_scale_val   = st_head_cond_scale_val
                head_cond_scale_quan = st_head_cond_scale_quan
                partner               = st_partner[]
                partnerx              = st_partnerx[]
     extensionin           = st_extensionin
                extensionout          = st_extensionout.

Last Skipped Date, Skip count, are not updated in any songs that i listen in my iPhone5s

Similar Messages

Maybe you are looking for