Last stock update Date Tab not updating in ICH

Hi Team
I observed that in ICH screen Last stock update Tab is not going to update every time while demand and stock information coming from ECC to ICH.
There is no stock inconsistency. All stock tab information are updating correctly in ICH compare to ECC system.
Only this Last stock update tab Date are not updating.
What is the reason behind this?
Could you please help me to resolve this?
Regards
Virendra Kumar
09769396038

Hi Virendra
It is a bug, please report to SAP and get fix
which version you are using and what is the patch level?
1341691 should be helpful check out
Best Regards
Vinod

Similar Messages

  • Has anybody noticed that Last played dates do not update?

    I have recently noticed that the playcounts and last played dates are not updating. When you play a song it does not update the last played date.
    Did anyone come across with this issue

    Yep, same for me. When i play on my iPhone, it doesn't update in iTunes using iTunes Match.

  • Data is not updating in DB Table

    Hi...All
    we have done the RFC-JDBC Synchronous scenario, we are getting the success messages into SXMB_MONI ,in the CCM also it was showing success. but data is not updating in to the Database Table. client want to see the response data in the Database Table only.
    pls help me this is very urgent.
    Regards,
    Pasi.

    Hi,
    If everything is working fine in XI there is some problem in database end only while query gets executed. Try debuging the sql query which you have by giving log statement and see what the query generated is.
    Got to your receiver jdbc communication chalnnel , Advance mode > Additional parameters,
    Enter logSQLStatement in the name column and true in the value column
    To view the SQL log Click on the message ID of the communication channel monitoring.
    or, alternatively, in Runtime workbench, click your message> details> audit log tab.
    Run the interface once more. Check the communication channel now. It will show the actual insert statement which is trying to insert into the DB and then you can figure out what is the query being fired to database and see if it is fine.
    Copy the same query and run in databse. you will be able to find the exact problem.
    thanks
    amit
    reward point if answer is useful

  • Data is not updated in the database

    hi.. to all..
    i'm using the following code ...... but the data is not updated in the database.. the output window get closed as soon as i clicked save button...
    i don't know wat's problem with the program...
    Plz help me.. to get resolve this problem..
    import java.applet.*;
    import java.awt.*;
    import java.sql.*;
    import java.awt.event.*;
    import sun.jdbc.odbc.*;
    public class Customerdetails extends Frame implements ActionListener
         TextField ccod,cname,add,phno,conp,email,fax;
         Label l1,l2,l3,l4,l5,l6,l7;
         Button save,exit;
         Connection con;
         ResultSet rs;
         Statement stmt;
         String s1,s2,s3,s4,s5,s6,s7;
    public Customerdetails()
        super("CustomerDetails");
        setSize(700,750);
        setLayout(null);
        setBackground(new java.awt.Color(245, 117, 105));
        l1=new Label("Customercode");
        l2=new Label("CompanyName");
        l3=new Label("Address");
        l4=new Label("PhoneNumber");
        l5=new Label("Contact person");
        l6=new Label("EmailAddress");
        l7=new Label("FaxNumber");
        l1.setBounds(20,100,100,70);
        l2.setBounds(20,180,100,70);
        l3.setBounds(20,270,100,70);
        l4.setBounds(20,340,100,70);
        l5.setBounds(20,420,100,70);
        l6.setBounds(20,500,100,70);
        l7.setBounds(20,580,100,70);
        ccod=new TextField();
        cname=new TextField();
        add=new TextField();
        phno=new TextField();
        conp=new TextField();
        email=new TextField();
        fax=new TextField();
        ccod.setBounds(200,120,150,50);
        cname.setBounds(200,200,150,50);
        add.setBounds(200,280,150,50);
        phno.setBounds(200,360,150,50);
        conp.setBounds(200,440,150,50);
        email.setBounds(200,520,150,50);
        fax.setBounds(200,600,150,50);
        Button save= new Button("Save");
        Button exit= new Button("Exit");
        save.setBounds(200,680,100,40);
        exit.setBounds(350,680,100,40);
        add(l1);
        add(ccod);
        add(l2);
        add(cname);
        add(l3);
        add(add);
       add(l4);
       add(phno);
       add(l5);
       add(conp);
       add(l6);
       add(email);
       add(l7);
       add(fax);
       add(save);
       add(exit);
      save.addActionListener(this);
      exit.addActionListener(this);
      setVisible(true);
    addWindowListener(new WindowAdapter(){
      public void WindowClosing(WindowEvent w) {System.exit(0);}});
    public void actionPerformed(ActionEvent ae)
    Customerdetails cud= new Customerdetails();
    if(ae.getSource()==save)
    s1=ccod.getText();
    s2=cname.getText();
    s3=add.getText();
    s4=phno.getText();
    s5=conp.getText();
    s6=email.getText();
    s7=fax.getText();
    try
          String query = "insert into Customerdetails (Customercode,CompanyName,Address,PhoneNumber,Contact person,EmailAddress,FaxNumber)"+ "values('"+s1+"','"+s2+"','"+s3+"','"+s4+"','"+s5+"','"+s6+"','"+s7+"')";
          Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
          con=DriverManager.getConnection("jdbc:odbc:prism");
          stmt=con.createStatement();
          rs=stmt.executeQuery(query);
          stmt.close();
    catch(ClassNotFoundException e)
      System.out.println(e);
    catch(SQLException e)
      System.out.println(e);
    else if(ae.getSource()==exit)
    System.exit(0);
    else
    System.exit(0);
    public static void main(String args[])
       Customerdetails cud= new Customerdetails();
    }

    This doesn't look right:
    ,FaxNumber)"+ "values(because it's equal to ,FaxNumber)values(and your SQL server won't understand it, put a whitespace between.
    /M

  • When we synch data from AD to FIM Portal 2010 r2 the data is not updates in FIM Portal.

    Hi,
    When we synch data from AD to FIM Portal 2010 r2 the data is not updates in FIM Portal.
    Active directory attribute co have value vietnam but in FIM Portal country attribute have value VIET NAM
    we simply mapped AD Attribite to FIM Attribute for inbound
    co===>country
    why this happen
    Regards
    Anil Kumar

    Anil, please check what do you have in metaverse. It seems that you have attribute flow precedence configured in a way that doesn't export to FIM Portal.
    Let's say you have flows like:
    (AD MA)
    Import flow: (AD) description -> (metaverse) description
    (FIM MA)
    Import flow (FIM) description -> (metaverse) description
    Export flow (FIM) description <- (metaverse) description
    And you have higher precedence from FIM. Then, you would never have FIM value updated - even if value in AD changes. It would be exported to FIM only when you don't have this attribute filled in FIM.
    If you found my post helpful, please give it a Helpful vote. If it answered your question, remember to mark it as an Answer.

  • After editing file in ACR 8.6 (Mac) , the file (NEF and XMP) modification dates are not updated

    With both my Mac's, reset Photoshop C  (2014) to previous version 2014.0. Now find that after editing file in ACR 8.6 (Mac) , the file (NEF and XMP) modification dates are not updated. Reloaded camera raw, etc., but still find modification dates are not updated, either using Finder or using Bridge to view dates. Editing other files, PSD, DNG, TIFF, etc., are updated and the information is correctly displayed.

    Ok, not entirely sure what I did but it's now working (Bizarre!). The only thing I did was 'eject' the ACR 8.6 .dmg file from the finder side bar and restart PS CC, so that may have been where I was going wrong all along!
    However, I now have another issue in that there is no preview of the shot in Finder on my iMac when I highlight the NEF file. I assume this is simply because Apple haven't yet released an update for the new D810 NEF files and so the computer doesn't know what it's looking at?!?
    If anyone has any other ideas though, then I'm more than willing to listen.
    Thanks again.

  • Deactivation date is not updating in Asset Master after retirement (ABAON)

    Dear Experts,
    Asset Capitalized on: 28.02.2009 and depreciation key used as: LINK-Str.-line from acq.value to zero without interest. Asset Retirement done with revenue (210) on 31.05.2009. We do have depreciation like (01 book depreciation, 15 Tax depreciation, 30 Local GAAP book depreciation).  Below is the asset and class:
    Asset name:  Maruti Baleno
    Asset Class: Vehicles
    Here my question is after retirement done with the transaction code: ABAON u201CDeactivation onu201D date is not updating automatically in the system, however when am trying to update manually the system showing error like u201CDeactivation not possible. Dep.area 15 has acquisition values.
    When am trying to do same transaction with T code: u201CABAVNu201D, the system updating the deactivation date.
    Can anybody explain me why the above error happening and why the deactivation date is not updating with t code: ABAON.
    Thanks,
    Francis.J

    Dear Atif Farooq,
    In the AO74 the transaction types (Deactivate fixed asset check box also ticked)
    200     Retirement without revenue
    210     Retirement with revenue
    When am trying to update manually below error appearing in AS02
    Deactivation not possible. Dep.area 15 has acquisition values
    Message no. AA296
    Diagnosis
    You cannot deactivate, since acquisition values are still present in depreciation area 15.
    Procedure
    Deactivation can only be posted by a complete retirement/transfer. The deactivation date is then set automatically.
    The above asset procured in the year of 2009 and same has been retired 2009.
    Thanks,
    Francis J

  • Time/date will not update

    After updating software, the time/date will not update.  My network is fine and I can get to the internet fine.  Also will not accept my apple ID

    Try restarting the Apple TV by removing ALL the cables for 30 seconds.

  • System status NTUP (Dates are not updated)

    Hi Guys,
    WBS Element has the system status NTUP (Dates are not updated) the option to untick this is greyed out and it is preventing the posting of a journal.
    Could you please let me know how to remove this system status.
    Regards,
    Abdul Rehman

    Hi Amit,
    Thanks for your reply,
    WBS is released and there is no user status as well but besides NTUP another system status is there i.e ACPT(Order accepted) is this is causing any problem for genral postings?
    Could you please also let me know how status NTUP got activated when i am checking in the change log it is not showing any name.
    WBS is very much an account assignment element.
    Regards,
    Abdul Rehman.

  • Statistical delivery date is not  updating automatically or by default

    When creating  the PO delivery date of a item in PO,is picking,but statistical delivery date is not  updating automatically or by default. I am not getting this automatically .Its need  for vendor evaluation.

    Hi,
    Check on it:-
    Statistical Delivery date vs Confirmed Delivery date
    pherasath

  • I have pending app updates that will not update, any suggestions great fully received

    I have pending app updates that will not update, any suggestions great fully received

    Try This...
    Close All Open Apps...  Sign Out of the Account... Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430

  • It is hooked up to good wifi and it is updating apps and not updating it just says waiting and it wont update or install anything while it is doing that how do I get it to stop updating?

    It is hooked up to good wifi and it is updating apps and not updating it just says waiting and it wont update or install anything while it is doing that how do I get it to stop updating?

    Fix iPhone Apps Stuck "Waiting" During Installation

  • I tried to update my nephew iphone 4 version 4.3.4 (8k2), I did back-up everything before attempting to update and the result when I click down-load and update, it does not update instead it says,  itunes could not contact the iphone software update etc.

    Hi to all,
    I tried to update my nephew iphone 4 version 4.3.4 (8k2), I did back-up everything before attempting to update and the result when I click down-load and update, it does not update instead it says,  itunes could not contact the iphone software update server because you are not connected to the internet. I did check my wire-less connections and the connection from my PC to wire-less is hundred percent okay. I did search using google.com to confirm and my connections is good. Is there any problem regardings my firewalls or any help will be appreciated. Thanks

    Hi bosefire,
    Thanks for visiting Apple Support Communities.
    You can use the steps in this article to troubleshoot your iTunes connection:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    Regards,
    Jeremy

  • I bought a new itouch 5, and when I plugged it in to get the updates it could not update and I got an error code

    I bought a new itouch 5, and when I plugged it in to get the updates it could not update and I got an error code

    And that error code is?

  • Hey guys . . how come I get updates, but can not updates them as they are "not applicable" for the "version" of the pad?, hey guys . . how come I get updates, but can not updates them as they are "not applicable" for the "version" of the pad?

    hey guys . . how come I get updates, but can not updates them as they are "not applicable" for the "version" of the pad?, hey guys . . how come I get updates, but can not updates them as they are "not applicable" for the "version" of the pad?

    The only people who can possibly assist you with this is Apple Customer Relations, call your local Apple contact number and ask for Customer Relations then explain your situation clearly and politely (be firm but don't rant).
    You might want to investiage what the local laws are regarding defective goods and 'fit for use' definitions on warranties etc. Consumer Protection can be a useful tool to use or bargain with if needed ...

Maybe you are looking for