Last three user logon date and time

Hi Everybody,
I would like to find out last few user logon details of an user. Where can I get this information if ST01 trace is not turn on? Table USR02 only shows the last logon that is insufficient.
Thanks!

You can use the dynamic audit logs in SM19 to record a successfull logon event for a single or all users.
If you want the information readily available, you can activate parameter rsau/enable and set static filters.
If it is too late for this, then you would need to look in the application statistics (ST03N in Expert Mode) to get the information.

Similar Messages

  • User Last Successful logon date and time

    Hello All,
    We have a requirement to display Last successful logon date and time every time user logs on to the Portal. Datasource for the portal is SAP.  I see few forums suggesting to use WCR_USERSTAT table, but i don't see this table being updated every time i logon to portal. Is there any work around for this?
    Thanks,
    Indrajit

    Hi IndraJit,
    Have a look at below link, if it can help.
    Regd Last Logon of User Logged onto portal
    I guess, the only way to get the info is through WCR_USERSTAT table. Also, check if the aggregator application is running on portal which tries to collect the aggregated data.
    http://help.sap.com/saphelp_nw04/helpdata/en/58/728ea01cf64fff996b827f2a06f9b1/content.htm
    Thanks and regards,
    Madhu Sudhan.

  • User status Date and  time

    Hi EXPERTS,
    In notification when we change user status, system logs date and time in action log
    I want to know in which table does user status date and time can be found.
    Regards
    Anil Kumar

    Anil Kumar,
    I'm not a t a system right now, but have a look at JEST and JCDS.
    PeteA

  • Getting user name, date and time into 1 field

    Hi All,
    I have to add a new field in a customising include of AUFK table. This field should have user name, date and time. How do I store all these values in a single field of the table? Please help.

    Ok Thanks all. Will try your suggestions. But there is one problem. As i have already mentioned that i will have to display this detail in one field of the table control, The format of display is: user name should be seen above and the date and time separated by space should be displayed below the name. How can i ultimately display this in the table control. Do i have to create 2 different fields (one for name and other for date and time) in the AUFK table or is there any other solution?
    Thanks

  • Database dictionary name to get last modified DML statement date and time?

    How can i know in the table is lastly modified date and time? There must be a data dictonary table, please let me know the name of that table.

    AshishS wrote:
    Thks for reply, but it give last DDL alter/modified basically i need last DML time and date on the table.oh yes,
    SQL> desc user_tab_modifications
    Name                                      Null?    Type
    TABLE_NAME                                         VARCHAR2(30)
    PARTITION_NAME                                     VARCHAR2(30)
    SUBPARTITION_NAME                                  VARCHAR2(30)
    INSERTS                                            NUMBER
    UPDATES                                            NUMBER
    DELETES                                            NUMBER
    TIMESTAMP                                          DATE
    TRUNCATED                                          VARCHAR2(3)
    DROP_SEGMENTS                                      NUMBER
    SQL>check this link also
    http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:1590655700346557237
    Edited by: CKPT on Oct 3, 2011 12:41 PM

  • Last Logon date and Logon time not updating in table USR02

    Hi,
    Please help us on this. After customer successfully logged in the webshop, we are checking the table USR02 in CRM system and the Logon date and Logon time is not updated. Because of this, the customer will be locked after certain number of days. When we check it in ECC system, customer's last logon date and time is updated. Can you tell us what could be causing this? Any advise what we need to check? Thanks in advance!
    Regards,
    Mike

    Hi
    1. Please check if the USAPPLREF table in ECC has the correct mapping done between the LOGON User and the Sold-to party (Customer)
    2. Please check the validity of those user in SU01 user data.
    3. Please check the USERS data from the USERADMIN Link (if it is configured in your scenario through XCM settings for USERS)
    Hope this will help.
    Regards

  • User login report in Active Directory for specific date and time

    I want to get User login report in Active Directory for specific date and time e.g user logged in at15-01-2015 from 8:00am to 4:00pm
    Is any query, script or any tool available?
    Waiting for reply please

    You can identify the last logon date and time using my script here: https://gallery.technet.microsoft.com/scriptcenter/Get-Active-Directory-User-bbcdd771
    If you would like to get back in time and see when the user did a logon / logoff then you need to have auditing enabled. Once done, you can records from Security log in the event viewer: https://social.technet.microsoft.com/Forums/windowsserver/en-US/98cbecb0-d23d-479d-aa65-07e3e214e2c7/manage-active-directory-users-logon-logoff-events
    I have started a Wiki about how to track logon / logoff and it can help too: http://social.technet.microsoft.com/wiki/contents/articles/20422.record-logon-logoff-activities-on-domain-servers-and-workstations-using-group-policy.aspx
    This posting is provided AS IS with no warranties or guarantees , and confers no rights.
    Ahmed MALEK
    My Website Link
    My Linkedin Profile
    My MVP Profile

  • Can EBS show the last date and time of a user login

    We have a requirement to display users their Last sucessfull login date and time. We would like to display after user have entered username/pwd i.e. Could someone guide how can we schive this ?
    Thanks in Advance
    Dinesh

    Hi,
    This is available through "Signon Audit Unsuccessful Logins" concurrent program.
    How do you audit an Oracle Applications' user? [ID 395849.1]
    Need A Way To Notify Users About Previous Failed Login Attempts [ID 357009.1]
    Thanks,
    Hussein

  • Date and time stamp of user status does not appear

    Hi, gurus.
    For a specific transaction type, the date and time stamps for certain user statuses do not appear within the transaction although these missing date/time stamps are captured in the database upon checking by our ABAP.  It seems that this problem started when I added several statuses and rearranged their status numbers in the status profile last year.
    I'd also like to ask if it's really necessary that the statuses within the status profile and date profile should maintained in the same positions. 
    E.g.
    Status Profile                                                                               
    Status No.     ---       Status Code      ---            Short Text                                       
    10            ---                    IP1L                   ---       In Process 1st Level                        
    20            ---                    IP2L                   ---       In Process 2nd Level                          
    Date Profile
    Display Position   ---       Date Type
    1                          ---       In Process 1st Level       
    2                          ---       In Process 2nd Level
    We're going to create and assign a new status profile for the concerned transaction type.  We'll make sure that this status profile is sychronized with the date profile.  Hopefully, the date/time stamps will all be displayed in prospective transactions but the problem on the missing date/time stamps in historical transactions will still remain.
    Pls. help us.
    Thanks in advance,
    Theresa

    I'd also like to ask if it's really necessary that the statuses within the status profile and date profile should maintained in the same positions.
    No

  • To fetch data on the basis of last program run date and time

    Hi all,
    My query is as folows:
    I am selecting BOM components from STPO table on the basis of some criteria.
    My requirement is to select only BOM components which are newly added or created after last program run,i.e. STPO-AEDAT and STPO-ANDAT are greater than last program run.Here i fetched last program date from customised structure(client specific) which has date field also,and compared with aedat and andat in STPO records.But how can I connect it with last run time as there is no such time field in STPO table.I need to fetch this data on the basis of last program run(time+date).
    Please help me..it's crucial,
    Thanks in advance,
    Meena

    Hi,
    We had a very similar requirement.
    We developed a custom-solution for this.
    Create a Z-Table and update it with your progname, date and time.
    Whenever the BOM was changed, it generated a change number ( this has to be done by the user)
    You can get the date and time from the change Number Table AENR and compare it with the timestamp in Z-TABLE
    Hope it helps,
    RJ

  • How to retrieve users logging-in and logging-out date and times in SharePoint

    At the moment I am using SherePoint 2013 with a few tenants.
    I am going to have access to the users logging-in and logging-out dates and times.
    For instance, I would like to know the detail of the dates and times which a particular user of a tenant has logged-in and logged-out during the past few months.
    Any idea?

    You can retrieve that info from the IIS log files. Maybe you can use a free IIS reporting tool that I've built and adjust it to your own needs, you can get it here:
    http://gallery.technet.microsoft.com/office/The-SharePoint-Flavored-5b03f323
    Btw, in a web environment usually there is no such thing as the log-out date and time because the end user just stops making requests. So, you've got to take a look at the last request and by default, after 20 minutes the session times out and you can assume
    the session has ended.
    Kind regards,
    Margriet Bruggeman
    Lois & Clark IT Services
    web site: http://www.loisandclark.eu
    blog: http://www.sharepointdragons.com

  • Getting last login dates and times for graphical/xwindows logins?

    Hi,
    How do I get the last login date and times for users who just use the GUI (and don't launch terminals)?
    So far such logins don't seem to show up when I do "last -f /var/adm/utmpx" or for wtmpx.
    What should I be using on solaris to get the last login dates and times for all users, whether they log in on the text console, graphical console, or remotely via ssh etc?
    Thanks,
    Link.

    Hi,
    How do I get the last login date and times for users who just use the GUI (and don't launch terminals)?
    So far such logins don't seem to show up when I do "last -f /var/adm/utmpx" or for wtmpx.
    What should I be using on solaris to get the last login dates and times for all users, whether they log in on the text console, graphical console, or remotely via ssh etc?
    Thanks,
    Link.

  • How to get last modified date and time of a file which is in apache server.

    Hi ,
    I need to get last modified date and time of a file in remote machine.
    This file is in remote machine which has apache server installed.
    I am trying to get this information by connecting to apache server from client by giving absolute URI of the file to file object.
    URI is got from apache server URL by using toURI method.
    when I use lastModified method , its throwing exception , because scheme of URI is not file.
    I can't give scheme as file because ftp server is not installed on that server
    Is there any other way to get this information .

    No, unless you can use an FTP client.

  • How to display last data update date and time in report?

    Hai All,
               I want to report the date and time of the last upload in a report. How can I do this?
    I mean if I load the data today 5th April 2006 at 8.30 pm, then would i be able to show that on my report at the top of it(along with filer objects may be)?
    Thank you.

    Hi Visu,
    You will find detail info from help.sap
    check the links and they are  useful
    BEX Analyzer:
    http://help.sap.com/saphelp_nw04/helpdata/en/9f/4e9d39d44cd45ee10000000a11402f/frameset.htm
    Web Application Designer
    http://help.sap.com/saphelp_nw04/helpdata/en/9f/4e9d39d44cd45ee10000000a11402f/frameset.htm
    -Doodle
    Message was edited by: Doodle

  • Snow Leopard users: Turn off automatic date and time in System Preferences immediately

    http://arstechnica.com/apple/2014/12/apple-automatically-patches-macs-to-fix-sev ere-ntp-security-flaw/
    When exploited, the NTP flaw can cause buffer overflows that allow remote attackers to execute code on your system.
    What this means is that, if you allow date and time to be set automatically by outside servers, you risk having your computer taken over.
    This is a critical issue, it's being exploited as we speak, and Apple has not provided the update to Snow Leopard users, only to 10.8/Mountain Lion and above. I strongly doubt Apple will ever get around to issuing an update for Snow Leopard, or they would have already. Chances of that happening are close to zero

    To me 10.6.8 is still the best OS X Apple ever released and I patched my system just like the shellshock back in September. It's really easy if you have some basic shell skills and XCODE installed,
    Here is what I did, it may save you some time:
    open the terminal app
    1) Download the source code, apply the patch (I got the source code links from the ntp site)
    cd ~
    mkdir ntpd-fix
    cd ntpd-fix
    curl http://www.eecis.udel.edu/~ntp/ntp_spool/ntp4/ntp-4.2/ntp-4.2.8.tar.gz | tar zxf -
    2) Patch and compile the ntp source code
    cd ntp-4.2.8/ntpd
    curl http://bugs.ntp.org/attachment.cgi?id=1165 | patch -p1
    cd ..
    ./configure && make
    3) Open the system preferences - Date & Time - uncheck Set date and time automatically (to stop the process)
    4) Rename the old object and then replace/copy them with the new objects
    cd /usr/bin
    sudo mv sntp sntp.old
    sudo mv ntpq ntpq.old
    sudo mv ntp-keygen ntp-keygen.old
    cd /usr/sbin
    sudo mv ntpdc ntpdc.old
    sudo mv ntpdate ntpdate.old
    sudo mv ntpd ntpd.old
    cd ~/ntpd-fix/ntp-4.2.8
    sudo cp sntp/sntp /usr/bin
    sudo cp util/ntp-keygen /usr/bin
    sudo cp ntpq/ntpq /usr/bin
    sudo cp ntpdc/ntpdc /usr/sbin
    sudo cp ntpdate/ntpdate /usr/sbin
    sudo cp ntpd/ntpd /usr/sbin
    sudo chown root:wheel /usr/bin/sntp
    sudo chown root:wheel /usr/bin/ntp-keygen
    sudo chown root:wheel /usr/bin/ntpq
    sudo chown root:wheel /usr/sbin/ntpdc
    sudo chown root:wheel /usr/sbin/ntpdate
    sudo chown root:wheel /usr/sbin/ntpd
    5) Open the system preferences - Date & Time - uncheck Set date and time automatically (to start the process)
    6) Done.
    -- update time manually
    sudo ntpdate -u time.apple.com
    -- check ntpd version (should now be: ntpd [email protected])
    sudo ntpd --version

Maybe you are looking for

  • Custom invoice clearing & payment posting

    Hi all, we are not recieving BAI2 file for lockbox from bank but we have an external software which will identify SAP customer invoices & corresponding payment. Now how can we post this payment as we do nor have BAI2 file. I think that some custom pr

  • Adobe Premiere Elements 12 will launch and then vanish

    Okay so just bought Adobe Premiere Elements 12. Loaded it up and went to run it. First time I ran it I get the Adobe Premiere Elements 12 Launch pad, you know where you select the Organizer or the video editor. I select video editor, it gives me a su

  • Import Cycle for India doing first Goods Receipt

    Hi Friends, We are going on upgrade from 4.0B to ECC 5.0. We are using TAXINN .  This is regd. the  Import pricing for India. Our client  is using 4.0B & thier sequence is : 0. Give advance to CHA agent for Customs clearing based on his estimation 1.

  • TopLink cached object changed are not commited to the database

    Hello, I'm using TopLink 10 and I have a writing issue with a use case: 1. I read an obect using TopLink that is in the IdentityMap 2. Using JSF this object is edited throught a web form. 3. I give the modified object to the data layer and try to mod

  • Internet tracking

    Is there an app that the IT dept can use to track internet activity on an ipad