Last time a deleted user accessed the system

Is there any way of finding out when a user that has been deleted from the system access the system?
I use STAT for active ID's but this does not work for inactive ID's.
Thanks,
Chris

Hi Rakesh,
Report RSUSR200 reads from USR02, which only pertains to active users.
>
Rakesh Kulkarni wrote:
> I found KRNL Tcode and SAPMSYST program against a user who was deleted on say 01 feb 08 .
> My question is wthr by checking KRNL tcode and SAPMSYST program against a user confirms that user was deleted on that date.?
USH02 does not tell you the date when the user was deleted. It only tells the last time the user logged in the system.
USH04 will tell when was the user deleted. Since a user cannot login to the system once deleted, USH04 timestamp will be greater than USH02. i.e. the user was deleted after the last login.
Hope this clarifies
Thank you
Abhishek

Similar Messages

HT201250 after taking the backup i had deleted on of the account/user from the system now want to take the backup back of that user how to do this

After taking backup from time machine i had deleted one user from the system now i want to get back that users data how to do this, pls help

How do I view or restore selected items?
Also, See Here... Restore From Time Machine http://support.apple.com/kb/VI29

HT5278 MY 1st gen iPad has candy crush ---but it is stuck in "an update mode". My iPad can no longer acceptsupdates for any games beyond 5.1. Therefore, each time I try to access the game it goes into a "pause" mode. I would hate to delete the game becaus

MY 1st gen iPad has candy crush ---but it is stuck in "an update mode". My iPad can no longer acceptsupdates for any games beyond 5.1. Therefore, each time I try to access the game it goes into a "pause" mode. I would hate to delete the game because I think I will lose my score. But I can't play the game either. Can someone help me with this? Can I go back to my last updated candy crush for my ipad, or do I have to delete it and start over? Also, how would I get the one for my generation iPad

I have a similar problem. But my iPad shows the connect iTunes screen and gives error 2001 when I try to restore it.
My iPad's battery was fine but I didn't use it for like 2 weeks. It's battery would've discharged and it turned off. When I tried to charge through wall socket, it got into the restart loop where it would show apple logo and turn off. So I did the simultaneous holding of Home and Sleep buttons for 10 seconds or more. It started showing connect to iTunes.
When I try to restore, the iTunes does the usual "extracting file" or something and go upto preparing for restore. But the iPad screen turns off from "connect to iTunes" and iTunes gives the error 2001, and the screen is back to connect to iTunes.
Also, if I don't plug in, the iPad seems dead, doesn't wake up or anything.

How to delete users in the child systems with CUA?

Hi All,
We have:
1. My SAP ERP 2005 (ECC 6.0)+ Windows 64bit + Oracle 10
2. EP 7.0 + Windows 64bit + Oracle 10
3. BI 7.0 + Windows 64bit + Oracle 10
4. Solution Manager 4.0 (CUA)
We managed all our QA and DEV users in ECC, EP using CUA from the Solution Manager server (Productive servers and all the BI 7.0 System Landscape aren't in the CUA).
My problem is when i want to delete a user. Sometimes if you delete a user in the solution manager (where the CUA is defined) the user still exists in the Child Systems. In fact you can see it with the SU01 only in the child system. I guess the idea is that if you delete the user in the CUA them the user is delete in the child system.
I found this information in the SAP Help:
As well as the authorizations already mentioned, you also need another authorization in the central system for object S_USER_SYS. You can only assign new systems to a new user with this authorization. ( No Problem with this )
When a user is deleted in the central system, the system entry for the user is retained until the deletion is confirmed. If an error occurs, you can repeat the deletion by canceling the system (in the child system).
What does mean: deletion is confirmed?
Best Regards,
Erick Ilarraza

Hi, thanks a lot for your reply.
We used the SAP Transaction SCUG to solve CUA Problem.
It is something about the refresh of the user in the Parent / Child systems, you need to Re-Refresh users and delete it again.
Best Regrads,
Erick Ilarraza

Bought a mac for my sons bday present of eBay :( it starts up in osx utilities screen, iv never seen the actual desktop(launch pad) I dnt know how to access the systemI know the basics for start up but says to delete files so I can dwnload the software?

AS above states the computer seems to run normally as far as turning it on, tabs & pages are fine. But I can't access the system to delete some files.. Which is what the 'error' keeps saying everytime I tr and download a helpful link/app or software.. The instal disc that seems to be stored on the comp says its mountain lion 10.8 install disk 'read only' & this is the only disc it gives me to select to startup.. I have the full software on USB as its very large.. So .. PLEASE TELL ME finally,
HOW to ... Access comp files to delete required memory for software install?? If this is the best option..
HOW to ... Erase everything on computer & install 10.8 via USB?
And when or what enables me to see and use this computer correctly..ie, launch pad? Etc..
PLease reply back in 'normal terms' as I'm already exceeding my boundaries of imac knowledge

First: no, you cannot use someone else's install DVD unless it is a retail version; all others are machine specific. It will not work and would be illegal.
Is this what you bought?
http://www.everymac.com/systems/apple/imac/specs/imac_cd_2.0_20.html
IF that is correct, then you are not on 10.8 because the highest OS it can go to would be 10.6
So, you'd either need the original install disks (preferred) or buy a retail Snow Leopard (10.6) - that is as high as you can go with that machine. And, your maximum RAM is 2 GB, so you couldn't go higher with the OS because of that either because it would not run well on 2 GB.
If you do get 10.6, then I'd suggest increasing the RAM to the max. of 2 GB.
If this is not the machine you got (maybe the seller just used any old box), then I'd suggest taking it to an Apple store/Genius Bar to have them sort out how to get out of this mess.

Time Spent by the user in the system and No. of transactions executed

Hi,
Can anyone tell, if there exists any tranaction/report to get the details of the Time Spent by the User in the system and No. of transasction run by User in a given period of time?
If I get the names of tables where SAP stores this information in, then that also will be helpful.
Thank you!!!

Hello Pranali,
the time spent by a user (which is the difference between login and logout) is <b>not</b> stored anywhere.
STAD and/or ST03 will not help here as only the time of the login could be determined from the workload statistics. The time of the logout cannot be retrieved from the workload data (as this action doesn't contain any "logout specific" information).
As a workaround you can use the Security Audit Log (sm19) to protocol the logon and logoff of the users. Based on this information you should be able to calculate the time a user was logged on.
About the number of transactions:
the workload analysis only uses dialog steps. As the number how often a transaction was called doesn't contain any useful information this information is <b>not</b> collected.
E.g. you can call su01 to create 100 user accounts or call ten times su01 to create one user. The workload creating 100 users will be higher than the workload of the remaining ten transactions...
So the figures 1 transaction vs. 10 transactions doesn't provide any useful information.
Regards, Michael

After recording text using the dragon dictation app, it is converted, it can be copied to the iOS system clipboard for use in any app, how does the user access the clipboard to retrive this information if it is no longer on the screen?

after recording text using the Dragon dictation app, it can be copied to the iOS systme clipboard for use in any app, how does the user access the clipboard to retrive this information if it is no longer on the screen?

You need to do a long-press in any data entry field, then select Paste.

Cannot delete users from the Central Management Console

I cannot delete users from the Central Management Console. I'm logged in to Enterprise as administrator but still get the following error:
There was an error while writing data back to the server: Sorry, you do not have the right to 'Delete objects' (id - 22) for 'koberg' (id - 725415). Please contact your system or permissions administrator if you require this right.
Thanks in advance for any help on this matter.

Oops, my mistake, sorry. Ok, so the Administrator cannot delete user koberg.
Check top level:
Logon to CMC, browse to Home > Settings and select the Rights tab. These are your top level settings. Factory default will show only Administrators and Everyone. Select the Net Access "Advanced" for the Administrators group. NB: Do not select these group names links - they will jump you out of the top level! On the Advanced rights page, ensure the right to "Delete objects" is explicitly granted.
Then set for the Users top level folder:
In the CMC, browse to Home, and select Users. Select the "Rights" button. Again - NB: Do not select these group names links - they will jump you out of the Users top level folder! Set the Administrators group to "Full Control". Save.
That should be all you need. However, there is a possibility the previous admin was busy setting security not only at the account level, but on groups so we need to verify the user:
In the CMC, browse to Home, and select Users. In the User list, select koberg. In the koberg account page, select the Rights tab. If the Administrators is not set to (Inherited Rights), make it so, and when you select the "Update" button, you should see the Net Access update to "Full Control". If this is the case, you should follow these steps on each account and accomplish this.
And if you still can't delete it, verify the groups:
In the CMC, browse to Home, and select Users. In the User list, select koberg. In the koberg account page, select the "Member of" tab. Note all groups koberg is a member of. Then in the CMC, browse to Home, and select Groups. Select the name hyperlink for the group(s) that koberg belongs to. On the group page, select the Rights tab, and ensure the Administrators have (Inherited Rights) - Full Control on all of these, also. If not, set it.
Finally, I know you inherited this, but let's overview some basics of simplifying your deployment administration. Follow these guidelines, and your administration life will be so much easier.
1. The Everyone group should never have any subgroups. Ever. All accounts on the system are a member of the Everyone group. Adding subgroups to the Everyone group is redundant.
2. For simplicity's sake, Application level access should be set on the Adminstrators Group, and the Everyone group. I know there are customers who add groups to application rights. I don't understand why users would have an account on the system if they are not allowed access to InfoView, but it's your system.
3. From a report object perspective, the Everyone group should be set at the top level to "No Access". This will result in them having no rights on anything at all. You break this inheritance at the application level to give them access to InfoView and other apps. On folders and objects, you ADD groups, then assign (ADD) rights as desired.
4. If you can help it, never explicitly deny a right to any user or group for any object or application. Explicitly deny overrides any other setting. If a user belongs to group A and group B, and group A is explicitly denied a right, you can explicitly grant it for group B or the user all day long, and it will still be denied. Always try to put yourself in the position of adding groups/users, and adding rights, then inheriting as far down the folder tree as you can.

Can two users access the same bootcamp (win os) instance?

We are two users who are using our imac and we both have own user names in mac os. I created a bootcamp partition with windows xp on it. Can both users access the same partition and create their own user spaces within xp?
Will that work also if we use Parallel or virtual box? (access the same user data as in boot camp?)
I would like to have the option for each user to access their windows data either through bootcamp or through the virtual tool.
Message was edited by: gss2
Message was edited by: gss2

gss2 wrote:
What do you mean Virtual box it will not run on its own partition? I have a virtual box running on my desktop and it runs just fine ...own partition?? I don't understand.
Running on its own partition means that the installed OS has its own formatted portion (partition) of the hard drive. A virtual machine does not have its own partition. It creates a virtual partition (a file on the computer) that simulates a file system (partition). So Virtual Box, or any other virtualization software, does not run Windows, or any other OS in its own partition.

ITunes crashes every time I try to access the store

Every time I try to access the iTunes store in the iTunes app it crashes. I am running Win 7 Home edition and the latest iTunes (I even uninstalled and reinstalled). Not only that but the albums that I purchased from the store only about 1/2 of the songs play. The other half give the message that I am not authorized to play the song. How can I be authorized for only half of the songs? And it happens on every album purchased from the iTunes store. (I tried everything in this support article iTunes repeatedly prompts to authorize computer to play iTunes Store purchases - Apple Support)

Greetings donm_hawaii,
After reviewing your post, I have located an article that can help with iTunes for Windows issues. It contains a number of troubleshooting steps and helpful advice for the issue you are experiencing:
iTunes for Windows: System restarts, blue screen, or quits unexpectedly when accessing iTunes Store
When accessing the iTunes Store on Windows, your computer may restart or display a blue screen (Windows XP), or iTunes may quit unexpectedly (Windows Vista). You might also have issues opening iTunes if it is configured to open to the iTunes Store.
This issue is caused by outdated drivers for ATI Radeon 2400 series video cards.
Note: Some companies other than ATI may have manufactured video cards based upon the design of the ATI Radeon 2400 series.
A driver is a piece of software that allows your operating system to communicate with a piece of hardware. Your PC consists of many hardware components, such as your hard disk, optical drive (CD or DVD drive), USB card, and video card. All built-in and external devices require drivers to communicate with your operating system.
When iTunes is accessing the iTunes Store, it relies upon your video card driver to display certain animation and graphics within the iTunes Store. This can trigger an issue which is fixed in newer versions of your video card drivers.
To find out what video card and version you have:
Right-click My Computer (Windows XP) or Computer (Windows Vista) and choose Manage.
Click Device Manager in the list on the left of the Computer Management window.
Click the plus sign next to Display Adapters in the list on the right.
Right-click the video card and choose Properties.
Take note of the name of the device.
Click the Driver tab for more details.
If there are multiple video card entries, repeat steps 4-6 for each entry.
For each driver listed, check the manufacturer's website to see if there is an updated version available. For more information on how to update drivers, follow Updating the drivers on your Windows PC.
If your drivers are the most up-to-date versions, from your computer manufacturer or video card manufacturer, you should consider installing the most updated driver from ATI.
Learn more
This is different than the issue described in What to do when Windows displays a blue screen error message or restarts when syncing the iPhone or iPod touch. The similarity is due to both issues being related to outdated drivers and driver conflicts.
Thank you for contributing to Apple Support Communities.
Best,
Bobby_D

How do you get permission for FlexLm/HASP to access the system clock?

I've got animation software that accesses the system clock to verify a security dongle. It works fine under 10.4.3, but I recently got a dual processor G5 with 10.4.5 on it. According to the s/w tech people, the dongle mgmt s/w doesn't have permission to access the system clock because of new security fixes. Anybody have any idea how I can open permissions to the system clock so I can get back to work?
Thanks for any help you can offer...
Brian

Moving this discussion to the Using Flash Builder forum.
I believe the software though is working as designed. From previous discussions I have seen the Design view was removed in Flash Builder 4.7. The users in this forum may be able to provide additional information around this.

Report showing the number of active users in the system

All,
There is a standard SAP report which shows the number of active users in the system (output same as AL08).
Does anyone remember this?
Cheers,
Bidwan

Hello Bidwan,
Are you talking about the report RSUSR000?
Regards.
Ruchit.

What happens when multiple users access the same servlet?

Do the users share all the same resources? Or is a new process generated for each user? I have a servlet that builds a string to return to the user and I only have myself to test, so I can't really see what happens when many users access the servlet. Is there a possibility that the string will get screwed up, like when dealing with multiple threads, or do all the users get their own resources and I don't have to worry about that?

huh? if you can point a test servlet at it, you can point a browser at it (even if the servlet does not serve html it will run)
try pasting the servlet URL into a web browser
refreshing multiple browsers repeatedly could provide a manual test

HT201250 I want to use Time Machine to back up my pictures because my hard drive is full but I'm wondering if once I back up the pictures then delete them will time machine delete them off the back up too?

I want to use Time Machine to back up my pictures because my hard drive is full but I'm wondering if once I back up the pictures then delete them will time machine delete them off the back up too?

Evetually yes.
If your pictures have been in the same location (same folder, same subfolder, ...) for more than a week, then copies if them will remain in your TM backups until it fills up. They are then vulnerable to being deleted.
If they've been there for less than a week, TM could delete them as early as a month from now. If they've been there for only a few hours, chances are TM will delete them tomorrow.
This is why TM is not the best tool to use to archive data that you will be deleting from your main hard drive. Copy them to a dedicated external drive, or burn DVDs.

Every time I try to access the ASPX pages, the browser doesn't display the pages. Instead, a popup box asks if I want to open or save

every time I try to access the ASPX pages, the browser doesn't display the pages. Instead, a popup box asks if I want to open or save

What site is doing this? 99% of the time it is a problem with the headers sent from the web server.

Last time a deleted user accessed the system

Similar Messages

Maybe you are looking for