Last update crippled my macbookpro display

Now most movies I run shows white rectangular artifacts.
Also scrolling through long rich web pages breaks the display. The content is clipped. Text on the page is split in half. It seems it can't keep up with the scrolling and never tries to fix it.
I also think the videos suffer from the same 'performance' issue.
I remember something about the last update containing a video update, but am not sure it was for nvidia based pros (like mine) or the ATI ones.....
Anyway, I think that update caused my probs.

j_mcbo wrote:
I pass over the info, I did the SMC without succed!!! unfortunatley in Venezuela there is no Store of MAC!!!
The only practical alternative is to have the MBP shipped to the nearest Apple repair facility.  I suspect that will prove to be very expensive. 
You may investigate if there are any competent local Apple repair technicians.
Ciao.

Similar Messages

  • Since the last update websites are not displayed properly anymore: embedded youtube-videos with tha old youtube-code are not displayed

    other browsers still display the websites properly

    Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
    *Press and hold Shift and left-click the Reload button.
    *Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    *Press "Command + Shift + R" (MAC)
    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    *Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do not click the Reset button on the Safe mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Since I downloaded the last update even the artwork in the itunes store doesn't display how do I get it back?

    SInce the last update none of the artwork in iTunes, even in the iTunes store, is displayed just empty grey boxes, anybody else have this problem?

    Hello michelleund
    It sounds to me like you are having issues connecting to the iTunes Store. Check out the articles below resolve the issue and get it to connect properly. 
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    Regards,
    -Norm G.

  • Displaying date/time in the report of last updating data?

    Hi,
    I have produced a report over a multiprovider. The multiprovider is built up from tow cubes. The data is being updated to one cube each hour and to the another cube one time daily.
    The date/time that display in the report is for the last updating data of the cube that updating one time daily.
    I want that the date\time be updated each hour, in another words, to display the date\time of last updating data to the second cube.
    Any suggestions?

    Hi Mohamad,
    Please read through this discussion for a solution:
    ROLLUPTIME of a multiprovider
    Hope this helps...

  • Last update Problems on Macbook Pro with retina display

    After installing OS X.8.2 last update (9/20) my MacBook Pro with retina display crashes in Finder and Parallels. Do you know how can I solve this problem?

    Its the creative suite w photoshop, illustrator, indesign etc. it's like that on all of them but I'm specifically talking about photoshop.

  • Hello,  since the last update 10.6.8, my MacBookPro mid 2010 randomly loses the connection with my wifi AppleTV2

    Hello,
    Since the last update 10.6.8, my MacBookPro mid 2010 randomly loses the connection with my wifi AppleTV2 2. It works well with the connection between myPC and filiaire AppleTV2 els and between my iPhone 2 (3G and 4) and AppleTV2 butpoorly between the MacBookPro and AppleTV2.
    Then I must quit and restart iTunes every time to continue to read my films. I repairedmy permissions, I restore my 2 AppleTV2 but that do nothing. I concluded that it is a loss of wireless connection. I do not know exactly what to do ...
    If anyone can help

    Thanks you rbrian, it seems that your solution is good because after some tests it works very well

  • Display about 20% darker, Dim. Happened after last update.

    My imac display is dim, kinda dark. Happened after last update and I have googled like crazy to find a solution, no luck so far. This is what i have done so far.
    - I have tried several settings in the Energy Saver part of settings.
    - Brightness is set to 100%
    - I have tried several Display Profiles and also made my own.
    - Did reset the PRAM, NVRAM several times.
    - Even started it in safe boot etc..
    - Reinstalled OS X completely
    It seems like a software related problem. If i press sleep the screen of course goes black but the interesting thing is that when it wakes up it is back to the normal nice brightness for about 5-10 seconds then goes dim again.
    Screen is at the normal brightness when using boot camp, windows.
    Please if anyone has a solution, thank you.

    I'm not convinced that it is a software issue, here's why: Our DVD burner stopped working so we brought it in to the local Apple store for repair. BTW the machine is 2 & 1/2 y.o. and yes, I purchased the extended warranty and I'm so glad I did (usually I pass on them). Anyway, they replaced the burner, we picked it up and when we plugged it in at home I noticed that the display was nice and bright and then went dim!
    I proceeded to change the display brightness controls as well as the gamma settings. I got it to look better (still not as bright as prior to repair) but it still got bright and then dim after waking.
    Since there were no software issues with the burner replacement, other than perhaps some drivers for the burner???, I attribute it to the repair!
    Just my $0.02 and would welcome any suggestions as to what it is and how to resolve the issue.

  • HT4623 Is their any other iPhone owners that dislikes the screens, fonts, display varieties this last update provided ? I know at least ten of my friends and family do not like the new fonts, screens it downloaded with the update. Is there away to change

    Is their any other iPhone owners that dislikes the screens, fonts, display varieties this last update provided ? I know at least ten of my friends and family do not like the new fonts, screens it downloaded with the update. Is there away to change these ?

    Is their any other iPhone owners that dislikes the screens, fonts, display varieties this last update provided ? I know at least ten of my friends and family do not like the new fonts, screens it downloaded with the update. Is there away to change these ?

  • Imessage only displays the phone number instead of the name after the last update. any idea how to fix it?

    imessage only displays the phone number instead of the name after the last update. any idea how to fix it? All messages had the names displaying correctly before the last update.

    From the menu bar, select
     ▹ System Preferences... ▹ Language & Region
    From the Region menu in the window, select one of the preset regions. If one is already selected, choose a different one, then change it back. Close the preference pane and test.

  • LR displays "no preview available" upon import direct from camera after last update. How do I fix this?

    I have the latest LR update with Nikon D700 and import directly from camera. I purchased a new CF card in case the old one was the problem but I get the same thing with the new card. Is there a bug in the last update or is this a problem with my equipment?

    Hey everyone in Apple world!
    I figured out how to fix the flashing yellow screen problem that I've been having on my MBP!  Yessssss!!!
    I found this super handy website with the golden answer: http://support.apple.com/kb/HT1379
    I followed the instructions on this page and here's what I did:
    Resetting NVRAM / PRAM
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.
    I went through the 6 steps above twice, just to make sure I got rid of whatever stuff was holding up my bootup process.  Since I did that, my MBP boots up just like normal.  No flashing yellow screen anymore!!   
    (Note that I arrived at this solution when I first saw this page: http://support.apple.com/kb/TS2570?viewlocale=en_US)
    Let me know if this works for you!
    Elaine

  • Last software update cripples Motorola Razrs- why?

    We have two Motorola Razrs that since the last update, have been unresponsive, slow, and has issues texting, calling... you know, using your phone as a phone.
    Well, chatting with Verizon will get you nowhere, support was unresponsive and said 'sorry'. This is not acceptable to me. I have three lines plus the home phone line with Verizon, been with Verizon for tens years, and this is the response I get?
    I consider this theft of service-> I cannot use the service as paid for by me and 'supplied' by Verizon. If Verizon doesn't want to hear it, I have the FCC, politicians, social media, press, etc that will.
    I need resolution.

    I have completed the factory reset, to my wife’s dismay, three times to date. SafeMode has no effect. There is no damage, water or otherwise. We have had these devices two years, there is no warranty. These devices were working perfectly before the last maintenance update pushed by Verizon to our phones. That is our sticking point: These phones were working flawlessly before the update, unreliable, slow, (removed) since the update.
    Look, I don’t want a discount, I don’t want anything free, we just want working phones.
    Here is the situation, we already have three lines and a Verizon home base station.  We had planned on upgrading to Note 3’s, adding another phone line for my daughter, and ‘upgrading’ both with our Razrs. This can no longer be unless we get this problem resolved.  We’ve spent quite a bit of money over the years with Verizon, I’m not understanding why we’re having these issues or why we cannot resolve them.
    Comment edited as required by the Terms of Service.
    Message was edited by: Admin Moderator

  • My BBZ10 is not working properly since my last update (OS 10.3.1.224​3

    OK so to start on a positive - I have been the biggest advocate of Blackberry over the last 3 years and have found it a really easy phone to just pick up and use without having to spend much time with user manuals. I started on a Torch and am now using the BB Z10. I found the switch nice and easy & have loved both phones. Up until now, bar the odd little niggle, I have loved using Blackberry.
    I had a notification to update to OS 10.3.1.2243 (no matter how often I read my notification, it would keep changing to unread and start flashing again) which was a nuisance, but I needed to sort through my notifications first and delete FB as the last update I did, restored ALL my FB notifictions since I'd had the phone, so definitely needed to avoid that scenario.
    I could see there had been some changes - layout different, easier to delete messages etc which is great, HOWEVER, I am really disappointed with how it's messed my phone up which I have never had before. There is now a new line in BBM that wasn't there before which covers the message that I am typing, so I can't actually see what I am typing. Every time I unlock my phone, my screen enlarges so I can't really see much on the hub/notification screen and it defaults to the hub which it didn't do before), my ringtone is much softer than it was previously and BBM no longer has a ringtone. Whatsapp, (the current winner of sending messages as I can actually see what I'm typing) actually has a tone but it's really soft, so not only can I not see what I am typing, but I can't hear when I get a message either, even if it's a person who has a specific ringtone for BBM
    My notifications keep freezing (can be when I am on looking at email notifications, Facebook etc) and some of my keys keep freezing when I am trying to type (p is the worst) and is generally making using my BB highly irritating. In fact there are times that I am so irritated that I want to throw my phone on the floor and jump on it. There is nothing wrong with the phone as it worked perfectly prior to the update, so this must be bugs in the new OS which is not good at all as these problems should have been ironed out prior to release.
    Does anyone know me how to fix this or can tell me when the next update is out to fix the bugs? It's all good and well adding all these great features, but if they mess up the basics, none of that is important and if I was nearing the end of my contract, I would definitely not be going Blackberry which is a shame as I've never had an update problem before with BB.
    Solved!
    Go to Solution.

    bunjamin wrote:
    There is now a new line in BBM that wasn't there before which covers the message that I am typing, so I can't actually see what I am typing.
    Hi bunjamin,
    just go to BlackBerry World, and update all your apps including BBM.
    bunjamin wrote:
    Every time I unlock my phone, my screen enlarges so I can't really see much on the hub/notification screen and it defaults to the hub which it didn't do before).
    you can turn off the magnifying glass :
    device settings >> accessibility >> magnify mode >> OFF
    you can deactivate the "reset to Hub view" :
    hub >> overflow (bottom right button) >> Settings >> Display and actions >> Return to Default View When Idle >> OFF
    bunjamin wrote:
    my ringtone is much softer than it was previously
    yes, BlackBerry has acknowledged this bug in this article from the public knowledge base:
    KB36755 After upgrading BlackBerry 10 OS to version 10.3.1 the volume for notifications is noticed to be significantly lower than in the previous version
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

  • How can I find the user that created a user account and the user who last updated the account

    How can I find out who created a user account and who last updated the account. I think that this is the same information that is displayed in the description field on the General tab.
    I am using ADO commands and vbscript
    ug3j

    I should point out that there are two attributes of all AD objects that can help you track down the correct information in the system logs. These are the whenCreated and whenChanged attributes. This will tell when the object was created and when it was last
    modified, which should help when you search the logs. Also, while whenCreated is replicated to all DC's, so they will all have the exact same creation time, the whenChanged attribute is technically not replicated. The date/time on each DC reflects when
    the last modification was replicated to that DC. The values will differ slightly on each DC, reflecting how long it took for the change to replicate.
    Richard Mueller - MVP Directory Services

  • How can I add a Last Update to a web page with a web app.

    I would like to know how to update a webpage whenever a web app item has been added or updated last.
    I have the tag {tag_lastupdatedate}  but it only works is only for the web app list or details page.
    I want to be able to add the date and time as to when the entire list was last updated. Any suggestions? thanks!

    Hi DLSAgency,
    There is a module called {module_lastupdated} and it will display the date when the web page it's on has been last updated, but there is no module that will display when the web app list inside that page was last updated. There no such functionality in BC.
    Cheers,
    Mario

  • How can I get the last updated email address of the customer ??

    Dear All,
    Please let me know, How can I get the last updated email address of the customer ??
    Also, I am trying to read CDHDR table where OBJECTCLAS is ADRESSE, however what value should be passed into OBJECTID field, looks like it is ADRNR with a Suffix BP.
    Please confirm me what value should be passed into OBJECTID field.
    Thank you.
    Anitha

    Hi Anitha,
      Check if this is something that helps you:
    Change documents in BAS
    CDHDR
    address type 1
    objectclass = ADRESSE             
    objectid = addrgroup + addrnumber     (ADRC-ADDR_GROUP + ADDRNNUMBER) !!
                     'BP  000xxxxxx'
    private address (address type 2)
    objectclass = ADRESSE2
    objectid =  'BP  000xxxxxx000yyyyyyy'   
                            persnumber+adrnr private
    address type 3
    objectclass = ADRESSE3
    objectid =  'BP  000xxxxxx000zzzzzzz'
                              persnumber +comp.address
    The above details is from the link: http://wiki.sdn.sap.com/wiki/display/ERPLO/LO-MD-BP
    Regards,
    Swarna Munukoti

Maybe you are looking for