Last update locked my ipad with a password - how do I unlock without restoring?

My iPad was plugged in - NOT password protected, because I do not have children and my iPad stays at home.  Picked it up to use it yesterday and it is requiring a passcode, which I never set!  VERY frustrated with the security "FEATURES" of the last update.  On another frustrated note...Do not like that I cannot use the same passcode on my iphone either - it required a change and is "helping me" so I don't have a security breach, but it is taking away my rights as a consumer to have the same passcode for YEARS if I really wanted it!  Explain to me how I would teach my MIL with a brain injury to keep changing her passcode too???  Seriously - we should be able to turn this OFF!

I understand your frustration and your anger due to the fact the the update caused this situation, but unfortunately there is no way to bypass the Passcode without restoring the device.
If you are that diligent about the way that you use the iPad, I have to assume that you have a current backup as you should. After you restore the iPad, you should be able to restore from the backup becuse the backup should not contain the passcode, if in fact the update did cause this situation. After you restore from the backup and sync with iTunes - if you use iTunes - your iPad should be pretty much back to where it was.
I am not sure what you are talking about by not being able to use the same Passcode on your phone.

Similar Messages

  • TS3274 my ipad locked because I forgot my password how I can unlock

    my ipad locked because i forgot my passward how i can unlock ? thank you

    If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup).
    If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.
    You may have to force iPad into Recovery Mode
    http://support.apple.com/kb/ht1808

  • What do i do if an ex employe locked my ipad with icloud password.

    Here's the situatiën.
    We use ipads to go to our customers and show our products. There is an (ex) employe who is fired from the company. (With a good reasen).
    This guy used icloud settings with his own icloud account. When he was fired he remotely locked the ipad. He now says that the ipad was his. It was never his ipad. We called him but he changed his number. We mailed him and emailed him. No response. We tried to restore with itunes but it doesn't work. Someone told us to go apple store with your receipt, but here is another problem. We changed our bookkeeper company because they had an issue with an employe who lost alot of receipts from a lot of company's Including ours. (I know that this sounds like a fairy tale). The receipt from the ipad was probably (99% sure) lost with this company's problem.
    I am stuck with a beautiful idevice which i cannot use anymore. I even went to the police but they say they cant help me with this problem.
    Please anyone advice..
    I am going crazy..

    Talk to Apple Support. A Senior Advisor could unlock the device as long as you are able to provide the device serial number and proof of purchase.
    The direct number for Apple’s Support is (800) 694-7466
    Streamlined email process for removing activation lock
    AppleCare has announced a new process to assist institutions with returned devices which may be activated locked.  For customers who experience this for the first time please call AppleCare at 800-800-2775 so that the process and needed documentation can be explained.  After the initial call customers can email with the required documentation for all Activation Lock Removal requests.
     Cheers, Tom

  • Ipad disabled. How can I unlock without restoring on Itunes? Need the photos

    My daughter disabled my Ipad. Now it says to connect to Itunes and does not even allow me to put in a code. I have many photos and videos saved on my Ipad I wish not to erase. Any way to unlock the ipad without having to restore it through itunes? Or some how pull photos and videos prior to restoring? Any help please. Thank you. CHRIS

    When you have important videos/photos on your iPad, you should backup frequently.
    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • I upgraded to ios5 and now I can't log into my ipad with my password.  How can I fix this?, I upgraded to ios5 and now I can't log into my ipad with my password.

    I upgraded to ios5 and now I can't log into my Ipad with the password I had set and been using for the last 2 years.  What do I need to do to get logged in?

    You will have to format your iPad.  Looks like that's the only way to reset your password.
    Formatting your iPad
    Turn off your iPad, turn on iTunes, hold large button down on ipad while connecting the white ipad cord to your Pc.
    When the window prompts format iPad,let the button go and press format button on iTunes.
    That is how I solved the same problem.

  • TS1363 My daughter has locked her Ipod touch with a password, how do I fix this?

    My daughter has locked her I pod touch with a password, how do I fix this?

    You'll need to connect it to the iTunes library you normally sync it with and restore it.  If iTunes asks you for this passcode before it will let you proceed, connect the iPod to iTunes in recovery mode instead using the instructions in this Apple support document.
    iOS: Unable to update or restore
    B-rock

  • IPod is in Recovery Mode and when I Try to connect my itouch it says it cannot connect because it is locked with a password, but I cannot unlock it since it is in recovery mode! Help!! Pleaseee

    iPod is in Recovery Mode and when I Try to connect my itouch it says it cannot connect because it is locked with a password, but I cannot unlock it since it is in recovery mode! Help!! Pleaseee

    Try putting it in DFU mode and then restore.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • TS1702 After I updated my new Ipad  with IOS 6, now Map& Dictation icon are not working. please help me

    After I updated my new Ipad  with IOS 6, now Map& Dictation icon are not working. please help me

    Thank you wjsten for your soon reply. Unfortunately on these days I'm in a country that Apple don't have any retail store here and for sake of time I prefer to fix it myself to DHL it to the nearest country to use its warranty. Do you have any idea how can I fix it? Do you think it's a software issue?

  • HT1212 my 10 year old daughter locked my ipad with a passcode. she can not remember the passcode.

    my 10 year old daughter locked my ipad with a passcde

    Guess someone's going to be punished.  Thanks for sharing this.
    Did you have a support issue we can help you with?  Did you actually READ the article you referenced in your post?

  • How can I get a app to keep my apps locked and enter with a password?

    How can I get a app to keep my apps locked and enter with a password?

    Andilol22 wrote:
    How can I get a app to keep my apps locked and enter with a password?
    Only if that capability is built into the app itself (and it isn't in the case of iOs native apps).

  • Locking one partition with a password or protecting it otherwise

    I have an internal HD that is partitioned. Would it be possible to lock one partition with a password or protect it from prying eyes when I let a 'stranger' use my computer? I know I could put a folder on it with TrueCrypt, but since I would only want to occasionally lock the disk, it is not really an option.
    Love to hear.

    Thnaks Király
    Use Finder -> Get Info on the drive to change the permissions on your partition. Set your user account to be the owner, and then set Group and Others to No Access. Then let guests use any other user account than your own.
    Good one had not thought of that. Is however as Thomas said not a optimal solution as there are ways around it.
    Is there a way to make the disk invisible and not accessible? Or have it not mount for certain users?

  • HT4802 I want to update m'y iPad with my MacBook pro it com error 9003

    I want to update m'y iPad with my MacBook pro it com error 9003

    You can share the files via your iCloud account, if they are Pages or Numbers files. You can email them as attachments to the other person, or provide them on a flash drive so they can import them on their computer.
    I would not try to copy the files direct from my computer to someone else's iPad.

  • Hello i occurred when i am updating iPhone or iPad with error number 3481 . what dose it means ?

    Hello
    i occurred when i am updating iPhone or iPad with error number 3481 . what dose it means ?

    You are posting on an iMac forum, I'd suggest you move your post to either an iPad or iPhone forum.

  • HT4623 I have a iPad with 4.2, how do I upgrade. I have no software update button?

    I have a iPad with 4.2, How do I update? I have no update software button. I need to update to get newsstand.

    You only have the software update button once you are running at least iOS 5 on the iPad. You need to update with iTunes on your computer first. You must be running the latest version of iTunes on the computer as well. 
    This article explains how to update your iPad.
    http://support.apple.com/kb/HT4623

  • I have forgotten my password, how do i reset without wiping my ipad?

    i have forgotten my password, how do i reset without having to wipe my ipad 1?

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.htmlhttp://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tbhttp://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Devicehttp://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htmhttp://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

Maybe you are looking for

  • How to Use Weblogic6.1 JAAS Sample in Servlet???

    Hi there, I am now developing JAAS security service based on weblogic. Here is the problem I met with: 1. There is no problem when invoking JAAS sample from application. But Subject.doAs() is denied when moving the application to servlet. 2. It is sa

  • Creating Hyper-Links in Acrobat Pro 8

    Good Day; I am somewhat new at this so please forgive me if this question has been asked before. I am running Acrobat 8 pro and I am designing some forms. One of the things I want to do is imbed a hyper-link in some of the text. This hyper link will

  • Authentication Keys

    Hi expert, somebody know how i can put Authentication Keys in receiver soap adapter? thanks for all.

  • Java == error while connecting to mysql database?!?!??!

    Hi. I'm using Eclipse to develope jsp pages. I'm new to java. I'm trying to connect from a jsp page to mysql server and i'm getting an error on the line below: Class.forName("com.mysql.jdbc.Driver"); Stacktrace: org.apache.jasper.servlet.JspServletWr

  • FRM-92101 error in Forms

    Hi everybody, I have on my laptop for study purposes Developer Suite 10g, with 9iR2 database and WebUtil 1.6. I have a form downloaded from internet in order to see how the TEXT_IO and CLIENT_TEXT_IO function. The form contains the WEBUTIL library. W