Last upgrade on G4 MDD ?

Hi all
i have FCP 4.5 on G4 MDD and OSX 10.5.8: wich is the last upgrade that can run on my old gear?
Roberto

hi mishmumken and thanks for the reply. I am interested only in FCP and not in the other sofware like color, compressor ecc. I want to be able to work with newer codecs and specs that are not installed in FCP 4.5 like 1920/25P or 50P for example. My graphic card is Radeon 9000 Pro 64Mb but i will upgrade it to X800XT soon.
Regards.
Roberto

Similar Messages

  • Lightroom 4 crashes when trying to open the slideshow module. I spent over three hours with both Adobe and Apple tech support and we know it is a permission issue but have not been able to get it solved.  It started with the last upgrade to 10.8

    Lightroom 4 crashes when trying to open the slideshow module. I spent over three hours with both Adobe and Apple tech support and we know it is a permission issue but have not been able to get it solved.  It started with the last upgrade to 10.8

    Back up all data.
    This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
    Step 1
    If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
    Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
    { sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -Rh $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
    Step 2 (optional)
    The first step should give you usable permissions in your home folder. This step will restore special attributes set by OS X on some user folders to protect them from unintended deletion or renaming. You can skip this step if you don't consider that protection to be necessary.
    Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
    When the OS X Utilities screen appears, select
    Utilities ▹ Terminal
    from the menu bar. A Terminal window will open.
    In the Terminal window, type this:
    resetpassword
    That's one word, all lower case, with no spaces. Then press return. A Reset Password window will open. You’re not  going to reset a password.
    Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
     ▹ Restart
    from the menu bar.

  • Memory card no longer recognized since last upgrade of OS

    Since last upgrade 2 days ago to OS 10.2.0.429 my memory card is no longer recognized !
    It says "multi media card instered" shorlty on screen when I intser it but then when I go in file manager it says "no multi media card inserted", when I go in System settings\storage it says "your mutli media card is not recongized, you can format it"....!!!
    Before the last upgrade of OS I had no problem with my card...!!!

    I'm really upset of BB service. Does anyone of BB is not supposed to handle cases...?

  • [SOLVED] ((none)) login/tty and no keyboard after last upgrade?

    Hi,
    I dual boot and it's been a while since I last upgraded. I booted into Arch, updated everything, and used the system for a few days before rebooting (perhaps a bad call). I just rebooted today and my login prompt is like this:
    ((none)) tty1
    (none) login:
    But my keyboard does nothing. No alt+f* to get to a different terminal, no nothing. I have to hard kill the machine. I've tried twice but would prefer not to do that more than I have to. The second time, fsck didn't work so I booted into the Arch install disk and ran it manually. I tried to chroot into my Arch install and re-run pacman -Syu but got transient server failures. Not sure what all needs to be in place to try and do that, though.
    Has anyone encountered anything like this before? I get the same behavior with arch and arch fallback. I boot to login prompt, not directly to X so it's not anything to do with that, at least not that I would figure.
    So far, the only thing I've been able to find is from 2007 (LINK) but it seemed related to X. I'm going to check rc.conf next time I boot up but wanted to see if there's any other suggestions from someone more experience before I boot up again and potentially have to hard kill.
    Thanks for any thoughts/suggestions.
    Last edited by jwhendy (2010-10-26 02:53:26)

    @Knute: indeed.
    Somewhat embarrassingly, I just found out about manually maintaining *.pacnew files today when researching an unrelated issue. It made me wonder if that was my problem. Perhaps something is goofed in /etc which would explain a ton.
    I'm in OS X right now but will reboot shortly and try to fix this issue.
    The keyboard issue is troubling as well, though. Some have reported no logins, but often it's a PAM or login manager issue trying to go into X directly. I'm doing no such thing and literally can't get *anything* to work on my keyboard. That makes me wonder...
    If I were to boot into the Arch CD and try to run pacman manually... what do I have to do other than
    # mount /dev/sda3 /mnt
    # chroot /mnt
    I tried that yesterday but failed. I'm wondering if I have to mount some other items for that to work. /proc?

  • I've recently noticed that since the last upgrade any links to pdf files on websited no longer work. All I get is a blank white page or a blank black page when I click on these links. Can I fix this?

    I've recently noticed that since the last upgrade any links to pdf files on websited no longer work. All I get is a blank white page or a blank black page when I click on these links. Can I fix this?

    YAY!! I have Safe mode!!
    um, now what?

  • I have an hp office jet 4500 and os maverick 10.9.4 and I can't get it to print after last upgrade, multiple malfunctions and error, help?

    I have an hp office jet 4500 and os maverick 10.9.4 and I can’t get it to print after last upgrade, multiple malfunctions and error, help? I have tried deleting and resetting printer and re-installing update 6 times. Last update attempt showed none available??? I can’t load the software directly from HP because their only option is to use the software update option on the mac....frustrated!!! Help!!
    I get blank pages that just run through the printer and a stats window that just 33% complete and goes no further.

    I am going on the guess that an old driver is still installed...
    Use Finder Go > go to folder, and go to /Library/Printers and delete the HP folder(s).
    Reset the Printing System:
    OS X Mavericks: Reset the printing system
    Now, Add the printer in Print & Scan prefs.

  • [SOLVED] Unable to boot after last upgrade [HP Smart Array]

    Hello guys.
    After last upgrade I'm unable to boot. I have fileserver with 2 discs in HP Smart Array RAID 1.
    While booting, kernel is unable to find my raid (should be cciss) and therefore lvm2 hook fails to find root partition. While going into recovery, I can chroot without an issue, lsmod shows that cciss driver is properly loaded, disk exits in /dev/cciss/, logical group and volumes are detected properly.
    No matter what I do, I just can't get cciss module into kernel. Putting in MODULES in mkinitcpio.conf's MODULES="" didn't help. I'm listing my initramfs images and there is no cciss.ko. I'm also searching for module in my filesystem and can not find it.
    Any help will be appreciated.
    Last edited by edke (2012-06-04 10:39:20)

    Thank you for your quick reply.
    DSpider wrote:First of all, have you tried the Fallback entry? Because initramfs-linux-fallback.img is supposed to have a full range of modules.
    Of course, no change.
    DSpider wrote:
    Second, after editing /etc/mkinitcpio.conf you need to regenerate your initramfs.
    # mkinitcpio -p linux
    But the MODULES section needs to have something in there...
    Here's mine:
    MODULES="pata_amd sata_nv ehci-hcd ohci-hcd ext2 ext3 ext4 vfat snd-hda-intel"
    You probably need "mdadm" or "mdadm_udev" in there too, I'm not sure... I don't use RAID, but maybe these will help:
    https://wiki.archlinux.org/index.php/Mk … Using_RAID
    https://wiki.archlinux.org/index.php/So … ID_and_LVM
    HP Smart Array is hardware RAID, therefore I don't need mdadm. Right module should be cciss, but this is somehow not working. Adding this into MODULES does not add cciss module to image.
    When I'm booting from Arch install for recovery and chroot, cciss is loaded and my HP Smart Array disk is visible.

  • Displaying bash-3.2$ in terminal [NOT-SOLVED after last upgrade]

    hello, I have this same problem: http://bbs.archlinux.org/viewtopic.php?id=39192 but the "solution" posted there does not help me at all, I wish I could reuse the old thread but the 'SOLVED' keyword in the title may be confusing so I'm starting a new one.
    the problem is that the prompt of my terminals (konsole, yakuake, xterm) is PS1='\s-\v\$ ' in all users; this started to happen after the last upgrade when the profile mechanism was changed somehow, I have no PS1 in my .bashrc and the PS1 in profile.bash is PS1='[\u@\h:\w]\n\$ '.
    an interesting thing to know is that the virtual consoles (the ones accessed with Ctrl+Alt+F[1-6]) have the right prompt, and sourcing /etc/profile also fixes the problem on the others so I'm guessing that some other configuration file (possibly KDE or X related) is overwriting my prompt but I can't find it! fgrep -R 'PS1' /etc/profile* only shows the one I set not the wrong one.
    /etc/profile and /etc/profile.bash are being loaded since the other declarations are present as well when running `set` only PS1 has changed it's value.
    any help is appreciated.

    still searching, first of all some tests I've made with the help of the guys at #bash
    [11:33] <`Samus_> guys is it possible that starting X somehow erases my prompt?
    [11:33] <`Samus_> I know that's is not purely bash and maybe OS-specific sorry
    [11:33] <`Samus_> but it's geting me nuts
    [11:33] <{xmb}> cant find it
    [11:34] * Vadi ([email protected]) has joined #bash
    [11:34] * Vadi ([email protected]) has left #bash
    [11:34] <pgas> `Samus_: where do you define your prompt?
    [11:34] * albech ([email protected]) has joined #bash
    [11:35] * Agiofws has quit (Remote closed the connection)
    [11:35] <`Samus_> is bieng defined in /etc/profile (/etc/profile.bash really but it-s sourced from there) there-s no PS1 in .bashrc and the rest of the variables are set
    [11:35] <`Samus_> the most weird part is that in the virtual consoles (Ctrl+Alt+[1-6]) is ok
    [11:36] <{xmb}> smells likke a code fault
    [11:36] <`Samus_> but everything under X not
    [11:36] <pgas> what if you do bash --login in xterm?
    [11:36] * Oper_ ([email protected]) has joined #bash
    [11:36] <`Samus_> let's see
    [11:37] <`Samus_> bash --login shows it ok
    [11:37] <`Samus_> in fact resourcing /etc/profile fixes it too
    [11:38] <{xmb}> code fault something where
    [11:38] <pgas> ok, so one of the script starting X sets PS!
    [11:38] <pgas> you are on debian? have you checked /etc/bash.bashrc ?
    [11:38] <`Samus_> that's what I think but I can't find it
    [11:39] <`Samus_> no I'm on archlinux
    [11:39] <pgas> what if you type just "bash" in a terminal?
    [11:39] <`Samus_> and it might be some mistake because it started to happen after the last upgrade
    [11:39] * floyd_n_milan ([email protected]) has joined #bash
    [11:39] * hark ([email protected]) has joined #bash
    [11:40] <`Samus_> 'bash' shows the wrong prompt, 'bash --login' the right one
    [11:40] <pgas> in a terminal with the correct PS1 that is
    [11:40] * osfulgore ([email protected]) has joined #bash
    [11:40] <`Samus_> oh, in a terminal with the right prompt it stays ok
    [11:40] * `Samus_ fells kinda lost...
    [11:41] <pgas> ok, so the problem seems to be in one of the script used to start X
    [11:42] * prince_jammys has quit ("Konversation terminated!")
    [11:42] * Oper_ has quit ("Íå çíàåòå Äàíèëà Áåðåíöåâà? Îí ñêîðî âñòðåòèòñÿ âàì! Íå ñëûøàëè òàêîãî àâòîðà? Äîñòàíüòå ïðÿìî çàâòðà!!!")
    [11:42] * Oper_ ([email protected]) has joined #bash
    [11:42] <`Samus_> grepping 'PS1' in /etc/X11 didn't showed anything
    [11:42] <`Samus_> some clue of what should I look for (or where)?
    [11:43] <pgas> startx? ask #archlinux?
    [11:43] <`Samus_> going...
    I've also tried different WMs (KDE, xmonad) and they have this same problem but then, "fgrep 'PS1' /usr/bin/startx" and "fgrep -R 'PS1' /etc/X11/" showed nothing!! now what?
    truly wtf...

  • Using Thunderbird/Firefox - since last upgrade, issues with HTML emails and opening PDF

    Since last upgrade, it seems that I'm having 2 (maybe 3) problems:
    1)  emails have white/grey horizontal lines in the bottom half of the email's text or graphics
    2)  can't open pdf files - when I could without issue before upgrade
    3)  Adobe Reader - I've downloaded updates, but they won't install.  (says not compatible with my computer, but running Mac OSX 10.6.8  (I even downloaded Opera brower to see if that would work, but there still seem to be Adobe issues)
    Any thoughts?

    mknabster wrote:
    Now i'm thinking it has to be those 10K fonts I put on there into the Font app.
    I think you are correct, that was not a good idea.
    Hopefully they all wound up in Home/Library/Fonts.  You can safely delete everything in there, as OS X does not put anything in that folder.  Fonts part of the OS are
    http://www.prepressure.com/fonts/basics/snow-leopard-fonts/list

  • Audio: Record Audio doesn't see mic since last upgrade

    Since the last upgrade (10.0.8) Record Audio does not see the mic input to my Saffire Pro 24 DSP - the Saffire is selected as input, mono mic on Channel 1. The Saffire is working and a signal appears on its level meters and headphones. It used to work fine. Anyone else seen this?

    Since the last upgrade (10.0.8) Record Audio does not see the mic input to my Saffire Pro 24 DSP - the Saffire is selected as input, mono mic on Channel 1. The Saffire is working and a signal appears on its level meters and headphones. It used to work fine. Anyone else seen this?

  • Before this last upgrade, when I would create a file and do a "Save As" it would always open "My Documents" by default, which is what I prefer. But since the upgrade it opens in some annonomus file, to which I have to go through several steps to get to My

    Before this last upgrade, when I would create a file and do a "Save As" it would always open "My Documents" by default, which is what I prefer. But since the upgrade it opens in some anonymous file, to which I have to go through several steps to get to My Documents, and I can't seem to select the default in my preferences. HELP PLEASE!!!

    Before this update of what software from what version to what version using which OS?

  • [Solved]how to revert last upgrade

    Newbie, here. With the last upgrade I lost my wireless connection, I am using an AUR package for my RTL8191SE and it is not updated yet. Until then I want to revert my upgrade. My cache still has the old packages, so if I could only know which packages were updated. I couldn't find anything in wiki, so any help is highly appreciated.
    Last edited by sonay (2011-01-31 20:24:48)

    Look in /var/log/pacman.log
    # edit just mirroring skunktrader's post...
    Last edited by jasonwryan (2011-01-31 20:21:41)

  • [NEARLY SOLVED] font rendering in gtk apps problem after last upgrade

    Im' using KDE, cairo-lcd, libxft-lcd... my fonts looked beautifully, but now they look horrible...
    After last upgrade my gtk apps (firefox, thunderbird) render fonts in an ugly way...
    I've tried to revert to pango 1.16.5 with no lucky result (the same problem)...
    here is the log:
    [2007-08-19 14:56] upgraded bind (9.4.1_P1-2 -> 9.4.1_P1-3)
    [2007-08-19 14:56] upgraded glib2 (2.14.0-2 -> 2.14.0-3)
    [2007-08-19 14:56] upgraded gnupg2 (2.0.5-1 -> 2.0.6-1)
    [2007-08-19 14:57] upgraded gtk2 (2.10.14-2 -> 2.10.14-3)
    [2007-08-19 14:57] upgraded kernel26ck (2.6.22.2.ck1-1 -> 2.6.22.3.ck1-1)
    [2007-08-19 14:57] upgraded libdownload (1.1-1 -> 1.1-2)
    [2007-08-19 14:57] upgraded libevent (1.3b-1 -> 1.3d-1)
    [2007-08-19 14:57] upgraded libxtst (1.0.2-1 -> 1.0.3-1)
    [2007-08-19 14:57] upgraded nvidia-ck (100.14.11-2 -> 100.14.11-3)
    [2007-08-19 14:57] upgraded sip (4.6-1 -> 4.7-1)
    [2007-08-19 14:57] upgraded pyqt (3.17.2-1 -> 3.17.3-1)
    [2007-08-19 14:57] upgraded xf86-input-joystick (1.2.2-1 -> 1.2.3-1)
    [2007-08-19 14:57] upgraded xorg-server-utils (1.0.4-1 -> 1.0.4-2)
    [2007-08-19 14:57] upgraded xorg-utils (1.0.2-2 -> 1.0.2-4)
    [2007-08-19 14:57] upgraded xorg-xdm (1.1.5-1 -> 1.1.6-1)
    [2007-08-19 14:57] upgraded xterm (225-1 -> 229-1)
    [2007-08-21 00:16] upgraded cpio (2.8-1 -> 2.9-1)
    [2007-08-21 00:16] upgraded ed (0.5-3 -> 0.8-1)
    [2007-08-21 00:16] upgraded initscripts (2007.08-1 -> 2007.08-2)
    [2007-08-21 00:16] upgraded intltool (0.36.0-1 -> 0.36.1-1)
    [2007-08-21 00:16] upgraded libarchive (2.2.5-1 -> 2.2.6-1)
    [2007-08-21 00:16] upgraded man-pages (2.60-1 -> 2.64-1)
    [2007-08-21 00:16] upgraded pciutils (2.2.4-2 -> 2.2.6-1)
    [2007-08-21 00:16] upgraded readline (5.2-2 -> 5.2-3)
    [2007-08-22 00:16] upgraded gdbm (1.8.3-3 -> 1.8.3-4)
    [2007-08-22 00:17] upgraded kernel26 (2.6.22.3-1 -> 2.6.22.4-2)
    [2007-08-22 00:17] upgraded lcms (1.16-1 -> 1.17-1)
    [2007-08-22 00:17] upgraded libice (1.0.2-1 -> 1.0.4-1)
    [2007-08-22 00:17] upgraded libxrender (0.9.2-1 -> 0.9.3-1)
    [2007-08-22 00:17] upgraded procinfo (18-3 -> 19-1)
    [2007-08-22 00:17] upgraded xorg-apps (1.0.2-4 -> 1.0.3-1)
    [2007-08-22 23:49] upgraded kernel26 (2.6.22.4-2 -> 2.6.22.4-2.1)
    [2007-08-22 23:49] upgraded librsvg (2.18.0-1 -> 2.18.1-1)
    [2007-08-22 23:49] upgraded libxpm (3.5.6-1 -> 3.5.7-1)
    [2007-08-22 23:49] upgraded libxaw (1.0.3-1 -> 1.0.4-1)
    [2007-08-22 23:49] upgraded makedev (3.8.3-1 -> 3.23-1)
    [2007-08-22 23:49] upgraded mcpp (2.6-1 -> 2.6.4-1)
    [2007-08-22 23:49] upgraded naim (0.11.8.2.1-1 -> 0.11.8.3.1-1)
    [2007-08-22 23:49] upgraded nfs-utils (1.0.12-2 -> 1.0.12-3)
    [2007-08-22 23:49] upgraded pam (0.81-4 -> 0.99.8.1-3.1)
    [2007-08-22 23:49] upgraded pango (1.16.5-1 -> 1.18.0-1)
    [2007-08-22 23:49] upgraded sox (13.0.0-1 -> 13.0.0-2)
    [2007-08-22 23:49] upgraded xorg-apps (1.0.3-1 -> 1.0.3-2)
    [2007-08-22 23:49] upgraded xtrans (1.0.3-1 -> 1.0.4-1)
    [2007-08-25 15:25] upgraded glibc (2.6.1-1 -> 2.6.1-2)
    [2007-08-25 15:25] upgraded bftpd (1.9-1 -> 2.0-1)
    [2007-08-25 15:25] upgraded gcc (4.2.1-3 -> 4.2.1-3.1)
    [2007-08-25 15:25] upgraded gtk-doc (1.8-2 -> 1.8-3)
    [2007-08-25 15:25] upgraded hal-info (0.20070618-1 -> 0.20070725-1)
    [2007-08-25 15:25] upgraded perl-xml-simple (2.16-2 -> 2.18-1)
    [2007-08-25 15:25] upgraded icon-naming-utils (0.8.2-2 -> 0.8.5-1)
    [2007-08-25 15:26] upgraded kernel26 (2.6.22.4-2.1 -> 2.6.22.5-1)
    [2007-08-25 15:27] upgraded kernel26ck (2.6.22.3.ck1-1 -> 2.6.22.5.ck1-1)
    [2007-08-25 15:27] upgraded libgnomeprint (2.18.0-1 -> 2.18.1-1)
    [2007-08-25 22:41] removed libgnomeprintui (2.18.0-1)
    [2007-08-25 22:41] removed libgnomeprint (2.18.1-1)
    i dunno what happened...
    plz, someone help me
    regards
    Last edited by saneone (2007-08-30 18:11:32)

    Bogart wrote:
    I think the spacing now is correct, while before it was wrong. The only "problem" is that you got used to a bad font rendering, and now that it has changed for better you feel like it's different and don't like it.
    Really, *most* of the problems that people find in Linux's fonts are just because they are used to the awful default fonts from Windows XP. Yes, people can even get used to those fonts and believe they're good!!! And when they see correct fonts in Linux they think they're bad...
    What I would do is remove the MS TTF fonts. They work bad in Windows and worse in Linux. You should use Bitstream Vera or DejaVu if you want good quality fonts (especially in web pages).
    But, then again, you might think that they look wrong just because you're not used to it... Oh, well...
    What does correct font / correct spacing mean ?
    IMO, that doesn't make any sense, because that's a totally subjective matter, like many other things in this world.
    BTW, I love how fonts look in Windows, and I think that must be the only thing MS got right. Thus, I'm using ms fonts in linux, and a rendering as close as possible (no autohinting or antialiasing or subpixel rendering).
    Similarly, I could find a woman beautiful that you would find ugly or just average. We are all different, and it's better that way

  • The multi level "isolation mode" don't work after the last upgrading to Illustrator CC 18.1.0? by the right mouse button menu

    PROVA

    Yes, I know that, but I ever work with the right mouse button,
    because selecting groups and subgroups with double click make some confusion for me.
    Regards,
    Fabio
    ufficio tecnico
    grafica e prestampa
    Via Verdi, 11 - 43058 Sorbolo (PR)
    Tel. 0521.694111 - Fax 0521.694360
    E-mail: [email protected] <mailto:[email protected]>
    E-mail: [email protected] <mailto:[email protected]>
    Web: www.litoexpress.it <http://www.litoexpress.it/>
    Il giorno 28/ott/2014, alle ore 06:57, Satinder S Bains <[email protected]> ha scritto:
    The multi level "isolation mode" don't work after the last upgrading to Illustrator CC 18.1.0? by the right mouse button menu
    created by Satinder S Bains <https://forums.adobe.com/people/SatinderSBains> in Illustrator - View the full discussion <https://forums.adobe.com/message/6874053#6874053>
    You can double click on the selected object to get into the multilevel isolation mode.
    Regards,
    Satinder
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6874053#6874053
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Illustrator by email <mailto:[email protected]m> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=33 67>
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0 <http://forums.adobe.com/thread/416458?tstart=0>.

  • Startdict crashes after last upgrade

    Startdict crashes after last upgrade
    $ stardict
    XDXF data parsing plug-in loaded.
    HTML data parsing plug-in loaded.
    Dict.cn plug-in loaded.
    Man plug-in loaded.
    PowerWord data parsing plug-in loaded.
    WordNet data parsing plug-in loaded.
    Spelling plugin loaded.
    Wiki data parsing plug-in loaded.
    QQWry plug-in loaded.
    WordNet dict rendering plug-in loaded.
    bookname: slovnyk_en-pl, wordcount 15424
    bookname: slovnyk_pl-en, wordcount 20087
    bookname: StarDict dictionary, wordcount 9
    [warning] Binding '<Ctrl><Alt>x' failed! Already assigned.
    (Gdk) [critical] IA__gdk_window_set_cursor: assertion `GDK_IS_WINDOW (window)' failed
    ERROR:compositelookup.cpp:34:void CompositeLookup::send_net_dict_request(const std::string&, const std::string&): assertion failed: (NetDictRequests.end() == std::find(NetDictRequests.begin(), NetDictRequests.end(), request))

    Maybe (because of occurrences of NetDictRequests) it is caused by internet modules which you don't have to need. I use just my local dictionaries and my ~/.stardict/stardict.cfg looks like:
    [stardict-private]
    version=1.0
    [/apps/stardict/manage_dictionaries]
    dict_order_list=/usr/share/stardict/dic/quick_italian-english.ifo/usr/share/stardict/dic/encz.ifo/usr/share/stardict/dic/czen.ifo/usr/share/stardict/dic/stardict-dict/stardict-dict.ifo
    dict_config_xml=<dictgroup name="Default Group"><querydict><localdict enable="true" file="/usr/share/stardict/dic/quick_italian-english.ifo"/><localdict enable="true" file="/usr/share/stardict/dic/encz.ifo"/><localdict enable="true" file="/usr/share/stardict/dic/czen.ifo"/><localdict enable="true" file="/usr/share/stardict/dic/stardict-dict/stardict-dict.ifo"/></querydict><scandict><localdict enable="true" file="/usr/share/stardict/dic/quick_italian-english.ifo"/><localdict enable="true" file="/usr/share/stardict/dic/encz.ifo"/><localdict enable="true" file="/usr/share/stardict/dic/czen.ifo"/><localdict enable="true" file="/usr/share/stardict/dic/stardict-dict/stardict-dict.ifo"/></scandict></dictgroup>
    dict_default_group=Default Group
    [/apps/stardict/preferences/dictionary]
    only_scan_while_modifier_key=true
    use_scan_hotkey=false
    enable_sound_event=false
    [/apps/stardict/preferences/network]
    enable_netdict=false
    [/apps/stardict/preferences/main_window]
    hide_on_startup=true
    search_website_list=
    window_width=680
    window_height=359
    hpaned_pos=114
    (Well, there are some strange symbols after ".ifo"s on "dict_order_list=" line, they couldn't be pasted.)
    Internet (mainly those Chinese) modules are really unusable for me, so the first thing I do when I install StarDict is I delete all occurrences of <virtualdict ... /> and <netdict ... /> in the configuration file. Maybe it will help you too if you keep just <localdict ... /> items.
    There's other thing that bothers me now with StarDict - RealPeopleTTS works fine with the version 3.0.1-3 but hesitates to with the up-to-date version 3.0.2-2.
    Last edited by nemamradfazole (2011-01-23 01:33:27)

Maybe you are looking for