"Last Used" application report?

I am looking for an easy way to report on the last time an application was used on a device...
Zenworks stores usage information on each application and somehow reports on the amount of time an application used over various periods of time (month/3month/6month etc).... but a direct value for when a specific device has last used application "x" is not available either in the basic reporting or through the reporting server... or at least I have not found it yet. Has anyone solved the issue?
Thanks in advance.
Ilmar.

Originally Posted by ilmark
I am looking for an easy way to report on the last time an application was used on a device...
Zenworks stores usage information on each application and somehow reports on the amount of time an application used over various periods of time (month/3month/6month etc).... but a direct value for when a specific device has last used application "x" is not available either in the basic reporting or through the reporting server... or at least I have not found it yet. Has anyone solved the issue?
Thanks in advance.
Ilmar.
Couldn't you create a Software Usage Custom Report for application "x" and use the "Last Used (local)" along with any other columns you want to show?

Similar Messages

Deploy Visual Basic 6.0 RDC application using Crystal Reports 9 on Windows Vista

Post Author: albe
CA Forum: General
When attempting to deploy a Visual Basic 6.0 Report Designer Component (RDC) application using Crystal Reports 9 on Windows Vista systems, the application fails after the first print or preview (that show normally) and an error occurred: -2147417848 Method '' of object '' failed.
The app use the RDC and Active Data; I verify that the problem is encountered when the app calls the 'SetDataSource' method.
I tried everything that came in my mind: reinstalling it a few times, with administrator priviledges, disabling uac, manually registering dlls, ...
I hope that this will be fixed, since Crystal Report 9 is the last CR version compatible with windows 98.
thanks in advance,
Alberto

Hello,
This forum is for community use and is not considered a support site. For assistance you need to purchase a case from our support site. But 9 is no longer a supported version so this is your only place to get assistance.
Try downloading the only patches available from:
ftp://ftp1.businessobjects.com/outgoing/CHF/cr90actxwin_en.zip
ftp://ftp1.businessobjects.com/outgoing/CHF/cr90dbexwin_en.zip
ftp://ftp1.businessobjects.com/outgoing/CHF/cr90devwin_en.zip
ftp://ftp1.businessobjects.com/outgoing/CHF/cr90mainwin_en.zip
Thank you
Don

Problem on using Crystal Report Viewer on windows application ("specified type is not valid ")

Hi
I am having problem on using Crystal Report Viewer on one of my windows application.
I am not sure how to put the Crystal Report Viewer 11 Control onto the tool box.
I could found a Crystal Report Viewer control on my computer, but it is version 8.5.
I have also found another one which is Called Crytal ActiveX Report Viewer, i don't think it is the one I can use. As when I try to load a dummy report on to the Crytal ActiveX Report Viewer, It return an error. "specified type is not valid"
Please see the Code sample below.
private sub loadReport()
     Dim r as New ReportDocument
     'v is the name of the Crystal ActiveX Report Viewer Control
     r.Load("C:\Report1.rtp")
     v.ReportSource(r) <---It throw error on this line.
End Sub
Could you give me some advice about what have I done wrong, How to check if I have set up the Crystal Report Component correctly in my Visual Studio 2005 Standard edition.
Thanks in advances.
Many thanks
Chi

VS 2005 Standard and Express editions do not come with Crystal Reports; only the Professional and higher editions will have CR bundled. However, I believe you can purchase CR XI R2 Developer and it will give you the components you need to create a VS .NET 2005 application using the Standard edition.
-MJ

Problem using Interactive Report in Application Express 3.2.1.00.11

Hi All ,
I am using Interactive Report in Application Express 3.2.1.00.11
I have made report as editable by using following query
Select ROWID,
APEX_ITEM.CHECKBOX(1,IDSKILL,'UNCHECKED') "Mark",
APEX_ITEM.TEXT(2,IDSKILL)"IDSKILL",
APEX_ITEM.TEXT(3,SKILL) "SKILL",
APEX_ITEM.SELECT_LIST_FROM_LOV(4,IDBEARBEITER,'DIR_LOV'),
APEX_ITEM.TEXT(5,ÄNDERUNGSDATUM)"ÄNDERUNGSDATUM"
from SKILLS
Problem :-
When I click FILTER option in Interactive Report , It is taking under Expression "<input type="text" name="f03" size="20" maxlength="2000" value="ARIS" />" and displaying in search filter as
Skill = '<input type="text" name="f03" size="20" maxlength="2000" value="ARIS" />'
Can I make display like Skill ="ARIS"
Any suggestion is welcom ..
Thanks in advance
Cheers
Sachin Srivastava

Hi,
As I know there is no fix/workaround for that.
Disable filtering and other stuff is only. But I think you of course like have filters and other nice thing of interactive report. Other vice you have done classic report.
It is better use classic report and build own custom filers.
Br, Jari

Oracle Problem using Interactive Report in Application Express 4

Hi All ,
I am using Interactive Report in Application Express 3.2.1.00.11
I have made report as editable by using following query
Select ROWID,
APEX_ITEM.CHECKBOX(1,IDSKILL,'UNCHECKED') "Mark",
APEX_ITEM.TEXT(2,IDSKILL)"IDSKILL",
APEX_ITEM.TEXT(3,SKILL) "SKILL",
APEX_ITEM.SELECT_LIST_FROM_LOV(4,IDBEARBEITER,'DIR_LOV'),
APEX_ITEM.TEXT(5,ÄNDERUNGSDATUM)"ÄNDERUNGSDATUM"
from SKILLS
Problem :-
When I click FILTER option in Interactive Report , It is taking under Expression "<input type="text" name="f03" size="20" maxlength="2000" value="ARIS" />" and displaying in search filter as
Skill = '<input type="text" name="f03" size="20" maxlength="2000" value="ARIS" />'
Can I make display like Skill ="ARIS"
Any suggestion is welcom ..

Try making your column definition as "Remove HTML and escape special characters".
I tried it and it make the column appear as editable as intended and also clicking on the column heading or on the filter in the IR bar behave properly.

How to know what reports are running by looking at SSReproting Services to see what reports are running and also any clue of which application is using the reporting services?

How to know what reports are running by looking at SSReproting Services to see what reports are running and also any clue of which application is using the reporting services?

To see what reports are running, take a look at the execution log views that are available in the database. Which views that are available are dependent on your version of SSRS.
http://technet.microsoft.com/en-us/library/ms159110.aspx
To see which application is using SSRS is a little more difficult. You can turn HTTP logging on, which will give you an idea of where connections are coming from, so you can see IP addresses. You can also look at the execution log view to see
user accounts. So, depending on your environment and use of service accounts, this could be easy, or difficult.
http://technet.microsoft.com/en-us/library/bb630443.aspx
If all else fails you can look for clues in the SSRS logs. Good luck...

How to get last column used in report sorting?

hi,
how to get last column used in report sorting?
simon

How to identifiy which column was sorted having different reports on page?
just use:
'YOUR_STATIC_REGION_NAME' instead of p_static_id,
:APP_ID for p_app_id,
:APP_PAGE_ID for p_page_id
:APP_USER_ID for p_app_user.
and dont forget to grant SELECT on #OWNER# to APEX_030200.WWV_FLOW_PREFERENCES$
good luck and thank you Juergen.Schuster
Simon

Application Crash when use crystal report

I use crystal report in visual studio 2010. In crystal report i use parameter, image, sub-report. When i close the crystal report viewer. there is always crash my program, below are the details.
How I overcome this situation?????????
Problem signature:
Problem Event Name: APPCRASH
Application Name: myapp.vshost.exe
Application Version: 10.0.30128.1
Application Timestamp: 4b61238e
Fault Module Name: KERNELBASE.dll
Fault Module Version: 6.1.7600.16385
Fault Module Timestamp: 4a5bdbdf
Exception Code: c0020001
Exception Offset: 0000b727
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Hi SriBalaram,
According to your description, it seems the crash is caused by crystal report in your project. For this kind of issue, I would suggest go to its official forum http://scn.sap.com/community/crystal-reports-for-visual-studio/content?filterID=content~objecttype~objecttype[thread] for
support.
Best regards,
Shanks Zen
MSDN Community Support | Feedback to us

Last Used status for Reports, Transactions, Tables ??

Dear all,
Kindly let me know how to find the last used status for
Reports, Transactions, Tables ??
This is very urgent, Please do the needful.
Waiting for the responses..
Cheers,
Virendra.

Here the issue is same.
STAT transaction is asking for the time which is the main hurdle.
I am hanging around with STAT transaction but not finding
how to getover the time specification.
if i dont specify the time i takes by default the 2 or minutes back from the current time.
which is not useful for me at all.
My main requirement is that my seniors want to know what are all reports or transaction or tables which are not used at what last time ?
so if i have to specify the time wont be so useful for me.
And writing a report 'll not gain anything coz internal SAP report is take time as main parameter.
Regards,
Virendra.

How to deploy Jdeveloper application to war file using jasper reports?

Hello people,
I´m not sure I this is the right place to ask, but I really need help.
I´m using Jdeve 10.1.3.2
My application is working perfectly. However when I deploy to war file in publish it into application server OC4J. I can´t print report.
the error says that it can´t find jrxml file.
I´ve tried to deploy report´s files with the applicaiton. I´ve tried just to set the path of the jrxml file. but nothing works.
How can I deploy my applicattion to use Jasper reports correctly?
Thanks willian

Hi,
I think first you need to wrap it into an EAR file, then you can deploy it.
As far as I know standalone deployment of WAR is deprecated as of 640.
similar threads:
How to deploy .war on NWDI
Deploying an existing WAR file into the Portal
Hopefully this tutorial also gives some idea:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/70/13353094af154a91cbe982d7dd0118/frameset.htm
Regards,
Ervin

RME 3.1 Custom Reports - Interface Last Used

Is there a way of creating this report to find out when a port was last used.
The template specifies yy:mm:dd:hh but the detailed report displays days hh:mm:ss
e.g. would like to create a report for interfaces not used for more than 90 days.
tried exporting to csv and sorting but the format doesn't sort in order correctly unless
anyone can tell me how to format the cells to sort properly.

Hi,
For the user tracking information, you can generate such kind of reports from Campus Manager instead of RME.
Kindly have a look at this doc link and try to generate the report from Campus Manager > User Tracking > Reports > Report Generator > Select "Switch port report " and various option available like :- Recently Down, Reclain Unused Down ....and you can specify the number of days manually "90" too.
Here is onlice doc link from Campus Manager 5.2 User guide.
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_campus_manager/5.2/user/guide_pb/ut.html#wp2671764
Thanks,
Gaganjeet

Using crystal reports to generate invoices

Post Author: samme
CA Forum: General
I'm writing a report for a client who wants to print multiple invoices using crystal reports. The invoice needs to sort in date order, one date and information associated with that date on each page. Each page has a subtotal since multiple items/services are linked ot one date. The last page of the invoice needs to have the total and should at the bottom of the page with the last subtotal. Not onlastrecord does not work because if the user prints multiple invoices, crystal doesn't see the "last record" until the last record of the last invoice.
The client wants the normal invoice information on the first page of the invoice: Company Logo, Customer Address, Company Info, Invoice #, Date, etc. as well as the column headers - quantity, unit of measure, price, etc.
On all other pages of the invoice, the client wants, the company logo, the invoice # and the column headers.
I have the report grouped by invoice number and then by a date formula. I cannot seem to get where I need to be with this invoice and have been working on it for some time. Can anyone give me some direction please.....
Thanks in advance!

On Sat, 15 Mar 2003 16:46:48 GMT, "Bill Bradley"
<[email protected]> wrote:
>I know. We thought that the Report Builder would be the way to go,
since
>ART didn't do too much for us. You guys poorly document it, and,
show no
>examples of using it to build a report. In addition, it'd be nice if
>SOMEONE would come up with a list of what tables show what. While
Novell
>may have a detailed list of things in the ZFD docs, it's pretty much
so
>detailed and complex that, it's next to useless. I've resorted to
doing
>huge dumps of things to a csv, then, using CR or Excel to generate
some kind
>of report.
>
>The whole process is not as easy as it should be, seeing that we paid
money
>to get a reporting vehicle.
>
>As comparison, SMS isn't any easier, but, there's more documentation
on it,
>so, when you're forced to roll your own report, it's a clearer
path...
I do understand, I'm not a programmer either :-(
the company who wrote report builder is Digital Metaphors, they have a
very good
training application and additional detailed information of how to
write
reports.
The CIM schema is I agree Cr** (well not easy) and without the detail
that
Novell provide it doesn't work.
I hope that a friend of mine is going to provide the compromise that
you and I
are looking for. Namely the ability to create the SQL queries that
ART can
make, with a simple report system. Keep an eye on caledonia.net for
an
announcement for ART4 (Derived from but unrelated to Salford
Software's
product) :-)
Tim
No Direct e-Mail Please!
Tim Heywood
Independent Consultant
Scotland
Novell Support Connection SYSOP
In theory, practice and theory are the same,
In practice they are different!

Using Crystal Reports for Visual Studio 2008 in C++/CLI

How can I use Crystal Reports for Visual Studio 2008 for creating WinForm Application written in C++/CLI under VS2008 ?

Can you repost your last response in English?
Also, check out this post
Read Before Posting - Where to find Crystal Reports .NET SDK resources
It has links to our Crystal Reports resources for .NET.
Edited by: Jason Everly on Apr 22, 2009 9:07 AM

Oracle APEX pages last used

Is there any way to find out what date a page in an application is last used and by whom? This I am trying to find out for all the pages in an application. I can do that going through each page > Activity > Page views by user. But it is cumbersome to go into each page and run "By User for Page XX".

>
Please update your forum profile with a real handle instead of "908006".
Is there any way to find out what date a page in an application is last used and by whom? This I am trying to find out for all the pages in an application. I can do that going through each page > Activity > Page views by user. But it is cumbersome to go into each page and run "By User for Page XX".This information is available through built-in reports and APEX views. See:
<li>Monitoring Activity Within a Workspace
<li>Creating Custom Activity Reports Using APEX_ACTIVITY_LOG
<li>APEX views: Home > Application Builder > Application > Utilities > Application Express Views
Note that the underlying logs are purged on a regular basis, so for the long term you need to copy the data to your own tables, as Martin handily suggests here.

Extraneous text in Application-Reports

I posted this in the Content Areas discussion first, and the recommended I post it here instead. I ported several Application-Reports from WebDB to Portal and noticed that now, in the edit parameters form of the Application-Report there is new text appearing, like "Query Options" and "Formatting Options." How can I turn the extraneous text off?

I've checked and unchecked everything as appropriate. My problem is exactly with the words "Query Options." Those words print. I don't want them to. The didn't used to print with WebDB, now they do. There is no option to turn them off. Similarly, if I want to give users, for example, an output option, the words "General Options" appear above the "Output Format" selection area. Again, this was not true of WebDB. I would like to omit this, in my mind, extraneous text; is there any way to turn it off?
Edit Report > Goto Customization Form Display Options > Uncheck whatever options that you do not want.
NOTE: If you have any bind variables then "Query Option" text will come.
null

"Last Used" application report?

Similar Messages

Maybe you are looking for