Last version for the most important files in CR10 (and CR Server 10)
Is there any place online where I could find the last version for (at least the most important) files in Crystal Reports 10 and Crystal Reports Server 10?
I have all kind of strange errors (subreports not being rendered first time when I see the page through Activex Viewer, but fine when I am visualizing the same page for the 2nd time, all kind of diferrences between the CR devel environment and what is seen in ActiveX viewer, and I want to be sure I have the very last version of it installed before asking my boss to buy CR 2008 (and waiting for CR Server 2008...)
Virgil Rucsandescu
The last Service Packs for Crystal Reports 10 is [here|http://support.businessobjects.com/downloads/service_packs/crystal_reports_en.asp#CR10].
The last Service Packs for Crystal Enterprise 10 is [here|http://support.businessobjects.com/downloads/service_packs/enterprise_en.asp].
Another important data point when considering upgrading: Crystal Enterprise 10 is now out of support, and Crystal Reports 10 will be out of support at the end of this year.
Sincerely,
Ted Ueda
Similar Messages
-
What is the last version of the Apple OS that supports Eudora and Quake III? (I'm at 10.4.11)
Hi There,
I am having vertical line issues with my G4 PowerMac Quicksilver (April 2002).. Red or purple lines and sometimes they connect to the pointer arrow.
I thought it was the graphics card but when I ran the Apple Hardware Test Disk version 1.2.5 it failed at the Logic board, although it's an after market Logic board because one of my (2) 1 gig processors died a few years back so I don't know if the hardware test disk is still valid with an after market Logic board?
Also What is the last version of the Apple OS that supports Eudora 6.2.4 and Quake III? (I'm at 10.4.11)
Thanks for any and all help, I think my time is limited in my old Mac..
EricHi-
I'd strongly recommend replacing the thermal compound on the Radeon 9800 Pro. It could very easily be a simple matter of lack of cooling which is causing your issue.
I have a tutorial here:
C874D84E-96DD-4DFF-9566-7C66BE065BB5.html
16196A0F-952B-47ED-A9F9-91F7B0ECA431.html
Use Arctic cooling MX-4 compound.
As for drivers or ROM updates, if the card is a flashed one, don't bother with the firmware. All ROMs are the latest firmware.
In Tiger, there is a retail driver update that you can try:
http://support.amd.com/us/gpudownload/Pages/jan2005updater.aspx
No updates needed for Leopard.
Eudora should be fine:
http://lowendmac.com/misc/10mr/mb0910.html#1
Quake is fine. This coincides with my observations:
http://www.insidemacgames.com/forum/index.php?showtopic=31884 -
The file type in question is InCopy, and the download box acknowledges that program as the type to open it with, but I never want to open it; I always want to save it. This feature works fine with other file types, but not with InCopy. I download thousands of files, so automating this is very important.
The file type in question is InCopy, and the download box acknowledges that program as the type to open it with, but I never want to open it; I always want to save it. This feature works fine with other file types, but not with InCopy. I download thousands of files, so automating this is very important.
-
dell computer windows 7
outlook 2010
iphone 4
I am unable to sync new contact from iPhone to outlook
Not very computer literate have ipad also
helpQuit Safari.
Hold the shift key down and relaunch Safari.
Reset Safari.
Click Safari in the menu bar.
From the drop down select "Reset Safari".
Uncheck the box next to " Remove saved names and passwords".
Click "Reset".
Empty Caches
Safari > Preference > Advanced
Checkmark the box for "Show Develop menu in menu bar".
Develop menu will appear in the Safari menu bar.
Click Develop and select "Empty Caches" from the dropdown.
Turn off Extensions if any, and launch Safari.
Safari > Preferences > Extensions -
We need IOS 4.0 for the ipod touch 1st generation not everybody have money to get a new version of ipod touch to used the most important social networks ... please think about it and i would grateful if i can use my old ipod touch .. Thanks
Sorry, the fellow users in the forum hae no way of making that happen. The maximum iOS for a 1st generation unit is 3.1.3
Stedman. -
The user profile in my old computer somehow became corrupted and I can no longer access it to log on. Unfortunately I was not aware of the Firefox sync feature at the time. I used a new profile and had to start from scratch to save new bookmarks and extensions/plugins. I did set up Firefox sync for this new profile. Now I have a brand new computer and desire to migrate the bookmarks to this new computer, including the original bookmarks in the old computer, as well as the bookmarks in the second profile. While I have located the profiles folder for each profile in my old computer (as well as extensions and plugin folders), the content of this folder is daunting. I would like to know which are the minimal folders I should select to migrate and would it be safe to simply copy and paste over the entire folder? Please note that I have also added new bookmarks into my new computer which I would not like erased. I hope these details are not convoluted.
Firefox has two methods of bringing in bookmarks from another Firefox profile:
* Restore a backup (JSON files in the bookmarkbackups folder): this completely replaces what you have, so is not the first step
* Import from an HTML file: this is additive and will create an Imported Bookmarks folder or add them under Unsorted Bookmarks
Restore is best if you tag your bookmarks because the JSON format preserves tags. If tags are not important, then it's easier.
What I suggest is:
(1) Export your current bookmarks to the HTML format; you can reimport these later. See: [[Export Firefox bookmarks to an HTML file to back up or transfer bookmarks]]. Open the file in Firefox (it's a web page) to make sure it looks complete before proceed.
Next, get the bookmarkbackups folders from each of your old profiles that you want to restore, and look for the most-complete-looking JSON files (they will have the most recent dates and largest number of bookmarks indicated in the file name). Proceed from the smallest set to the largest, or oldest to newest; basically, restore the most important one last.
(2) Restore a backup, then export to HTML. This article has the steps for a restore: [[Restore bookmarks from backup or move them to another computer]]. Then export to HTML and check for completeness.
(3) Repeat #2 until you get to the last/most important restore. You don't need to export that one.
(4) Import the HTML files you've made throughout the process.
(5) In the Library dialog, reorganize. Firefox doesn't have a deduplicator, but you might find one or more extensions to do the job on the Add-ons site if you find a lot of overlap.
Make sense? -
What was the last firmware version for the Zen Micro before M
I would like to know what was the last firmware version for the Zen Micro before the MTP firmware?
Please make sure you are 00% on this.
Thankyou.I think it does, but I'm not sure; since I wanted MTP, I only used .x firmware long enough to save the original Creative test files (with MediaSource, not ZMME) before upgrading to 2.x. And yes, I had to li've with 2..02's shorter battery life until 2.20.05 came out.
May I ask why you want to go back to .x firmware? The only thing that will get you is the ability to use it with Win98SE/2000/Me--but only if you can install Creative drivers on every PC you use it with. MTP requires WinXP SP or 2 and WMP 0, but doesn't need any Creative software at all to work. (Microsoft has made an MTP driver for Win98SE/2000/Me, but it requires customization and may not be supported by other software. I'm tinkering a bit with the customization part right now.)
There are other pitfalls in changing Micro firmware families, in either direction--you'll lose all the files on your Micro, you'll have to install a different ZMME (and I've heard non-MTP ZMME isn't quite as full-featured as MTP ZMME), and you'll need a new plug-in for MediaSource to work. -
My time machine back up does not appear to back up documents and e mails (the most important things for me). How do I get this done?
How do you know it's not backing up those things? To check documents, go in the Finder to your documents folder, then go to the Time Machine icon in your menubar and click Enter Time Machine. Scroll back through time and see if previous versions of the documents exist in the backups.
For Mail, same thing. Open the Mail app, go into Time Machine in the same way, and scroll back. Your inbox should change to reflect how it looked when it was backed up.
Matt -
I've been using samsung for a long time and I just changed into an iPhone 5s and the most important thing I need is my calendar appointments , but in the notification center it doesn't show my events for tomorrow and it doesn't even show more than 1 event , will there be an updated or this soon? Or should I just shift back to samsung?????
Go to settings/notification centre and make sure today vie and calendar day view are both on
-
Which views are the most important for a dba admin?
Hi I am new to oracle, and I am wondering which views are the most important to monitore.
Can someone give me a usefull link?
I know the views depend of wich kind of information you wanna retrieve.
But I think about space left on tablespaces, segment information, backup information, status of the database.....
So any help would be appreciated.For example I am wonering which views would an admin taking a new job and database would look?I would recommend you (if not already done):
- first read the Concepts manual:
http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14220/toc.htm
- then the Administration Guide:
http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14231/toc.htm
At the end of each chapter of this document, there is a section named "Viewing Information About ..." such as http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14231/create.htm#sthref482
that contains the related views. -
Hellow every one. i just updated my iphone 5 with the ios7. unfortunately i experience different type of bugs...the most important one to me is that the itunes store do not open at all. i'm disappointed with this version of iOS. my itunes version is updated and my mc version is also updated
my question is: how can i make itues store to work? how can i go back to the previous version of ios?Upgrade to Snow Leopard - it's compatible with the latest version of iTunes, and still supports PowerPC applications.
$19.99 - http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Snow Leopard is required if you wanted to upgrade to Lion, anyway, which you may want to in the future if the latest version of iTunes no longer supports Snow Leopard. -
Laptop editing with Premiere Pro CS4: what are the most important specs
Laptop Editing: What are the MOST important specs?
Hello everybody, I have been a long time lurker, but I decided to join in and share my voice.
I've been editing, for a while now, various projects of various lenghts shot on my HV20, on an IMac using Adobe Premiere Pro. Actually, I bought the CS4 Extended Production Suite last year thinking that it made sense to be able to edit, do the coloring and effects+ sound all within the same suite.
AND, it came with OnLocation, wich is, I think, a fantastic tool. I really want to be able to record and monitor my future shoots using OnLocation. I've seen how useful monitors and scopes are on set, and the idea of being able to shoot in HD and actually checking the focus on something larger than a few inches is very appealling!
So a laptop is in my future. Now, what are the most important specs?
I could buy 1) a barely used Macbook pro early 08- 17" HD led display ,4g Ram ddr2 ,nvidia 8600M GT 512 VRAM ,800Mhz BUS, 200G 7200HD
and have enough money left to buy an Apple Display 30" refurb
OR 2) a new Macbook pro 17, 4 g Ram ddr3, 512 VRAm, 4g Ram ddr3, double procsessors 9400M+9600M GT 512 VRAM, 1066 BUS, 500G 7200HD
and wait for a second display!
Plus, of course, a portable External Scratch Drive on the Express Card. Now, if that fast drive is handling the footage, could'nt I settle for a 5400HD in the laptop,, they seem much less prone to problems-clicking noise, heat-than the 7200, especially in the new unibody model. Is 800 versus 1066 BUS a terrible trade-off? In terms of secondary displays , I've heard less than lukewarm things about the new Apple 24 LED (glossy is no-no for me).
My intentions are to make documentaries and short fictions as well. I make a living as an actor so I don't need to be performing as a director/editor business wise!
I do want to explore that side of the craft, in a professional and enjoyable way though. I know that, in addition to the laptop, I will get a MacPro in a few years.
Thanks a lot for the inputs!Successful video editing (as compared to tear your hair out video editing) requires at least two hard drives... one for all software and one for all data... some people use 3 drives, with data on one and scratch files on the 3rd drive
I'm not sure about software, but everything I've ever read in this forum says 5400 is NOT fast enough for the data drive
If you want to edit video... you have to buy the hardware that works -
In 10.8, when I sorted Finder by date added or date created in column view, the most recent files would appear at the top of the list. Currently, this happens as it should in every single view mode EXCEPT column view (which is pretty much the only view I ever use). Currently, I have a folder with over 2000 files in it that date back to 2011, so now I have to scroll for like ten minutes just te get to files that were most recently added. Who in their right mind would want to sort by last modified with the oldest result listed FIRST? Ridiculous. I can't figure this out. Any help?
Thanks for the reply leroydouglas! Unfurtunately this doesn't cause the column to be ordered correctly either. After selecting this option, the files seem to be ordered by label, and the most recently added file is somewhere in the middle of the list. I'd like it to be at the top, and have other files/folders descend in retrochronological order by their add date.
Any other input from the community would be greatly appreciated, even if it's just confirming that this is/is not expected behavior. I'd be super bummed to find out that this IS expected behavior, as it's really counterintuitive and extremely inconvenient.
Thanks again! -
Want to display a space after last field in the output txt file
hi
I want to display a space after last field in the output txt file which is generaed by my program on utility server the last field lengyt we have defined is four and in database it is of three characters and requirement is to disppaly the last fourth field as space in the output file w hich is not shown as the txt file automatically gets closed at the third place as it is the last field in the record and ind atabase records are of therss char only but user wants to display this fourth position in the notepad output file as space ( which is last field in the output file)
eg
name house street country
record output coming in file
ram h3 street3 thn now this thn which is last field the notepad get closed at thn only
i want to display one space in last field for the whole of output file
ie ram h3 street3 thn(space)
sham h4 street4 sgp(space) so on......
we need to show this space in the output file as blank
regards
Arorahi Atish
i am using
loop at gt_sagadr_outtab into wa_sagadr_outtab
move wa_sagadr_outtab-country to wa_sagadr_text+223(226).
endloop
in this last field ie country i need to display the last 226 as blank as only country key is two char in database so the last space is not shown
i am not unsing the fM as tolb by you
and afterwards
i am usning
Concatenate 'Sagadr_' sy-datum sy-uzeit '.dat' into gv_filename_sagadr.
CALL FUNCTION 'FILE_GET_NAME'
EXPORTING
CLIENT = SY-MANDT
LOGICAL_FILENAME = gc_lfile
OPERATING_SYSTEM = SY-OPSYS
PARAMETER_1 = gc_param1
PARAMETER_2 = gc_send
PARAMETER_3 = gv_filename_sagadr
USE_PRESENTATION_SERVER = ' '
WITH_FILE_EXTENSION = ' '
USE_BUFFER = ' '
ELEMINATE_BLANKS = 'X'
IMPORTING
EMERGENCY_FLAG =
FILE_FORMAT =
FILE_NAME = gv_filepath_sagadr
EXCEPTIONS
FILE_NOT_FOUND = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
and lastly
open dataset gv_filepath_sagadr for output in text mode encoding default.
if sy-subrc eq 0.
loop at gt_sagadr_text into wa_sagadr_text.
transfer wa_sagadr_text to gv_filepath_sagadr.
endloop.
endif.
close dataset gv_filepath_sagadr.
if sy-subrc = 0.
message S002 with gv_filepath_sagadr. "Files & created on Application server
endif.
SO NOT SURE WHERE TO USE THE CODE AND HOW -
Let Photoshop automatically load the most recent file
I have in the task bar icons for the PostScript editor PSAlter and for Photoshop.
The workflow is always: Edit in PSAlter and interpret in Photoshop.
Clicking in the task bar on the Photoshop icon should open Photoshop, load
the most recent file (which is meanwhile modified), confirm last settings by OK
and start the execution.
Is it possible to automate this sequence – by just one click on the icon?
Best regards --Gernot HoffmannI doubt that would work out well.
One could possibly link a Script to Photoshop being "brought to the foreground" with Script Events Manager but that might not always be the intended process when switching to Photoshop.
How exactly is the "most recent file" identifiable?
Do you change the settings often or could they stay fixed?
Maybe you should also ask over at
Photoshop Scripting
Maybe you are looking for
-
Unable to capture onClick event of htmlb:image in a controller
Hi, I am trying to capture onClick event of an htmlb:image (which is present in my view) in DO_HANDLE_EVENT method of my controller. Surprisingly, when I click the image, page does refreshes. But the event in not captured in do_handle_event method. C
-
Calling a java loaded API from PL/SQL
HI, I have a java program loaded in the Database. For sake of clarity I am posting the java Program also. package mypackage1; public class WriteClob extends CLOB public static void main(String[] args) { Connection conn = null; String url = null; Stri
-
Why can't I access iCloud on my iPad?
Every time I try to get onto the cloud on my iPad 2, it tells me to set up an account--I already have one. I use the cloud every Amy on my computer!
-
Can we detrmine Credit Check at delivery or billing level
Hi Can we determine Credit Check at delivery or billing level other than at Sales Order level? If yes,what settings need to be done in IMG?
-
Sound for music but not for videos
Hi, I can listen to songs on my Ipod, but when I watch movies, there is not sound. Any ideas? Thanks!