Last Year Asset Depreciation Value Does not Accumulate in Jan2010
Hi Experts,
One asset Capitalization and Depreciation Start date is same.
We Run the Depreciation up to last year the value is 800.
In Jan Depreciation is 100.
In Feb System is not Displaying the Accumulated Balance in Asset Explorer. (800 + 100).
Please Advise me How can i get that accumulated Balance.
The most tabs are based on yearly simulation In Feb System is not Displaying the Accumulated Balance in Asset Explorer. (800 + 100).
Have a look to the tab posted values
Similar Messages
-
Retirement of asset result doc. does not include current month depreciation
Hi,
While retirement of tangible fixed asset result document does not include current month depreciation. So it makes closing month procedure impossible.
So, what are the configuration have do now to include current month depreciation?
Please help.
Regards,
SwethaDear members of this forum,
please have a look at rules of engagement:
Do not ask for points - This forum should be firstly about information exchange; points are an incentive and a way of saying thanks.
Asking for points is like asking someone to say "thank you": The only time we do this in real life is when teaching a child good manners.
Saying it to an adult is insulting, so why do it in the forums? If someone keeps asking questions without awarding points, simply stop answering them or use the abuse button to report it
Best regards
Horst -
Asset Legacy dt upld-problem in uploading fiscal year assets without value
Hi all ,
I am trying to upload Assets which are pertaining to current Fiscal year and for which no depreciation run is taken place , using Tcode AS91,
Initially I got error :
Capitalization date must be earlier than or same as transfer date.
Then I changed transfer date to 31.03.2009 .
Now I am getting error :
Current fiscal year 2008 has to be after transfer date 31.03.2009 .
How do I take these Assets with / without values ?
and if without values , then how can I update Asset values ?
Regards ,
Pallavi .Hi Ramesh,
I have same scenaio we are uploading the assets on 30.09.2008, so our data transfer date is same.
The issue is
1. When we start AS91 for current year, assets takeover values fields are in display mode.
System configuration was:-
A). Legacy data transfer date was 30.09.2008
B). last period posted in previous system was 6th
C). capitalized date taken by me is after 31.03.2008 (Note: - when I take capitalization date before 31.03.2008, than system show me take over tab in change mode)
2). While doing AS92 also system shows me all takeover tab fields in display mode, when I select capitalization date after 31.03.2008.
The thing is that how we can upload all those assets which we have purchased in the current year and how we will treat with the depreciation in the system
up to which date we should take accumulated dep for previous year assets.
please answer if u want i can raise a seprate question.
Regards -
Asset acquisition value is not updating in Asset history sheet & AW01N
Hi,
The issue is the asset acquisition values are not updated in AW01N & Asset history sheet report for particular asset acquisition transaction only.
it`s showing in asset history sheet but its nt added in the current APC value in the asset history report & also its showing in AW01N transaction but in acquisition change column its not updating.
I have also checked the below link but still i am persisting the same problem.
Asset acquisition value not updating
Regards
AmitHi Amit,
check note 366848.
Implement reports RACORR110_B and the report RACORR55 from the note 366848 in your system.
At first run the report RACORR110_B. Check the field ANLC-ANSWL bevor and after running the report.
The report RACORR110_B accumulates the values of the asset line items and writes the result in the field ANLC-ANSWL.
After this, please start the report RACORR55. This report forwards the values in the following year.
(If this is not the reason (ANLC is correct), the report makes nothing.)
Regards Bernhard -
Some question about asset depreciation value?
In our system, there is a asset acquisition value 3297600, use life 5 years.
We use Straight line to calculate depreciation value of one month is 3297600 / 5 / 12 => 54960, this asset will be completed depreciation in 2011/08,
Original Value
2011/01 -54960
2011/02 -54960
2011/03 -54960
2011/04 -54960
2011/05 -54960
2011/06 -54960
2011/07 -54960
2011/08 -54960
When our user transfer other asset value to this asset, the asset depreciation becomes a strange value.
The User trasnfers two asset value to this asset. The first asset transfered 303090 (Asset acquisition 3030900, Accumulated depreciation -2727810) in 2011/03/31, The second asset transfer 12480 (Asset acquisition 149,760, Accumulated depreciation -137,280) in 2011/04/30
User expects the deprecaition value as below
2011/01 -54960
2011/02 -54960
2011/03 -54960 + -50515
2011/04 -54960 + -50515 + -2496
2011/05 -54960 + -50515 + -2496
2011/06 -54960 + -50515 + -2496
2011/07 -54960 + -50515 + -2496
2011/08 -54960 + -50515 + -2496
But current asset calculated the deprecaition value as below
2011/01 -54960
2011/02 -54960
2011/03 -54960 + -50515
2011/04 -54960 + -50515 + -2496
2011/05 -54960 + -50515 + -2496
2011/06 -54960 + -50515 + -2496
2011/07 -54960 + -50515 + -2496
2011/08 1,949 (?)
2011/09 -107,971 (?)
2011/10 98,534 (?)
2011/11 -100,483 (?)
I don't know why the SAP calculated depreciation period becomes to 2011/11?
How can I change the asset depreciation value to "User expects the deprecaition value"?
The user chooses depreciation key AS90 Configuration as below
[AFAMA - AS90|http://farm5.static.flickr.com/4104/5055701109_5fa161f569_b.jpg]
[AFAMS - A90|http://farm5.static.flickr.com/4124/5056317442_0a05a3097d_b.jpg]Hi,
In SAP there are different settings depending if you what the additional incoming charges to depreciate with independent start dates, versus all subsequent acquisitions to an asset record adopting the existing "Capitalized on" date in master data for the very first acquisition to record.
Are you getting the other option not desired? -
Hii ..
need help on this ..
This what I am doing ..
I am using a DATAEXPORT function to export level0 data from my essbase 11.1.2.2 to Microsoft SQL 2008 tables.
So what I did first I exported the level0 data to a flat file using DATAEXPORT and the created the SQL columns by the same in that order only in my SQL table.
When I run it fails with this error:
ODBC Layer Error: [21S01] ==> [[DataDirect][ODBC SQL Server Wire Protocol driver][Microsoft SQL Server]Column name or number of supplied values does not match table definition.]
[Tue Jul 23 18:26:07 2013]Local/dataexp/dataexp/admin@Native Directory/1209813312/Info(1021014)
ODBC Layer Error: Native Error code [213]
[Tue Jul 23 18:26:07 2013]Local/dataexp/dataexp/admin@Native Directory/1209813312/Error(1012085)
Unable to export data to SQL table [dataexp]. Check the Essbase server log and the system console to determine the cause of the problem.
[Tue Jul 23 18:26:07 2013]Local/dataexp/dataexp/admin@Native Directory/1209813312/Info(1021002)
SQL Connection is Freed
[Tue Jul 23 18:26:07 2013]Local/dataexp/dataexp/admin@Native Directory/1209813312/Warning(1080014)
Transaction [ 0x1c50001( 0x51ee7d66.0x80342 ) ] aborted due to status [1012085].
[Tue Jul 23 18:26:07 2013]Local/dataexp/dataexp/admin@Native Directory/1209813312/Info(1012579)
Total Calc Elapsed Time for [test.csc] : [1.44] seconds
=============================================================
I did a simple test on my Sample.basic application then ..
loaded the calc data to it and then used the below script to export to a flat file
//ESS_LOCALE English_UnitedStates.Latin1@Binary
SET DATAEXPORTOPTIONS
DataExportLevel "Level0";
DataExportOverwriteFile ON;
DataExportColFormat OFF;
DataExportDimHeader OFF;
FIX(
"Jan",
"Sales",
"Actual"
/*DATAEXPORT "File" "," "/home/hypadmin/samtest.txt";*/
DATAEXPORT "DSN" "Abhitest" "sample" "sa" "welcome1";
ENDFIX
out put as below:
"Sales"
"100-30","California"
"Jan","Actual",145
Now In sql I created only 3 columns with name Jan/Sales/Actual and when I run this script again with comments removed .. I get the same error as what I have got in my first test case with other application ..
but when I create the columns with same name as what its in export
Sales/100-30/Califirnia/Jan/Actual
It created the new rows successfully ..
So with this I think the error which I am getting with my other application might be because of the same column issue .. but then I have created all the columns by looking at the export file only as I did in sample ..
Any idea would be helpful ..
Thanks
Abhishek
IFirst make sure you add
DataExportRelationalFile ON;
to your set commands it is missing
I alwats like to also add
DataExportColHeader dimensionName;
so I am sure what dimension is getting put into the columns.
Then count the number of dimensions in your outline (exclude attribute dimensions). You need at least that many columns in your table -1 + the number of members you will be returning as columns in the export
Taking your example Sample basic has 5 dimensions
Measures
Years
Scenario
Product
Market
Since you did not specify a dataexportcolheader it took the dense dimension Scenario as the columns. Your fix statement is limiting that to one member. Doing the math
5 -1 + 1 = 5 columns in your table which is what you found works. Suppose you fixed on bothe Actual and budget in scenario then you would need 6 columns 5 -1 +2 -
VMM 2012R2 UR4 - Version 3.2.7768.0
Not sure when this started happening since I haven't had to update or create a new RunAs account in VMM in some time, but every time I do, either through the console or through PowerShell it throws an error about The specified directory service attribute
or value does not exist. The VMM Service account is the same as it always has been, and other than this issue everything with VMM is working fine. The full text of the error message is below.
I am hoping someone has some ideas because I don't have any more at this point.
------------------- Error Report -------------------
Error report created 12/22/2014 9:43:33 AM
CLR is not terminating
--------------- Bucketing Parameters ---------------
EventType=VMM20
P1(appName)=vmmservice.exe
P2(appVersion)=3.2.7768.0
P3(assemblyName)=Microsoft.Cryptography.DKM.dll
P4(assemblyVer)=3.2.7510.0
P5(methodName)=Microsoft.Incubation.Crypto.GroupKeys.ADRepository.EnumerateKeys
P6(exceptionType)=System.Runtime.InteropServices.COMException
P7(callstackHash)=d0d2
SCVMM Version=3.2.7768.0
SCVMM flavor=C-buddy-RTL-AMD64
Default Assembly Version=3.2.7768.0
Executable Name=vmmservice.exe
Executable Version=3.2.7768.0
Base Exception Target Site=140712994535888
Base Exception Assembly name=System.DirectoryServices.dll
Base Exception Method Name=System.DirectoryServices.DirectoryEntry.Bind
Exception Message=The specified directory service attribute or value does not exist.
EIP=0x00007ffa67d15bf8
Build bit-size=64
------------ exceptionObject.ToString() ------------
System.Runtime.InteropServices.COMException (0x8007200A): The specified directory service attribute or value does not exist.
at System.DirectoryServices.DirectoryEntry.Bind(Boolean throwIfFail)
at System.DirectoryServices.DirectoryEntry.Bind()
at System.DirectoryServices.DirectoryEntry.get_IsContainer()
at System.DirectoryServices.DirectoryEntries.ChildEnumerator..ctor(DirectoryEntry container)
at Microsoft.Incubation.Crypto.GroupKeys.ADRepository.EnumerateKeys()
at Microsoft.Incubation.Crypto.GroupKeys.DKMBase.FindNewestKey()
at Microsoft.Incubation.Crypto.GroupKeys.DKMBase.GetCurrentKeyAndUpdate(KeyPolicy& keyPolicy)
at Microsoft.Incubation.Crypto.GroupKeys.DKMBase.Protect(MemoryStream plaintext)
at Microsoft.VirtualManager.Engine.DKMUtil.Protect(Byte[] data)
at Microsoft.VirtualManager.Engine.CryptoHelper.Protect(Char[] data)
at Microsoft.VirtualManager.Engine.CryptoHelper.Protect(SecureString data)
at Microsoft.VirtualManager.DB.RunAs.RunAsDBAccess.UpsertRunAsAccount(RunAsAccountData data, SqlContext context, Boolean isAdd, Boolean setCredential)
at Microsoft.VirtualManager.Engine.RunAs.RunAsAccount.AddOrUpdateObjectInDB(SqlContext context, Boolean setCredential)
at Microsoft.VirtualManager.Engine.RunAs.RunAsAccount.UpdateDB(SqlContext ctx, Boolean setCredential)
at Microsoft.VirtualManager.Engine.RunAs.RunAsAccount.Update(SqlContext ctx, Boolean setCredential)
at Microsoft.VirtualManager.Engine.AuthorizationManager.SetRunAsAccountTask.RunSubtask()
at Microsoft.VirtualManager.Engine.TaskRepository.SubtaskBase.Run()
at Microsoft.VirtualManager.Engine.TaskRepository.Task`1.SubtaskRun(Object state)
--------------- exception.StackTrace ---------------
at System.DirectoryServices.DirectoryEntry.Bind(Boolean throwIfFail)
at System.DirectoryServices.DirectoryEntry.Bind()
at System.DirectoryServices.DirectoryEntry.get_IsContainer()
at System.DirectoryServices.DirectoryEntries.ChildEnumerator..ctor(DirectoryEntry container)
at Microsoft.Incubation.Crypto.GroupKeys.ADRepository.EnumerateKeys()
at Microsoft.Incubation.Crypto.GroupKeys.DKMBase.FindNewestKey()
at Microsoft.Incubation.Crypto.GroupKeys.DKMBase.GetCurrentKeyAndUpdate(KeyPolicy& keyPolicy)
at Microsoft.Incubation.Crypto.GroupKeys.DKMBase.Protect(MemoryStream plaintext)
at Microsoft.VirtualManager.Engine.DKMUtil.Protect(Byte[] data)
at Microsoft.VirtualManager.Engine.CryptoHelper.Protect(Char[] data)
at Microsoft.VirtualManager.Engine.CryptoHelper.Protect(SecureString data)
at Microsoft.VirtualManager.DB.RunAs.RunAsDBAccess.UpsertRunAsAccount(RunAsAccountData data, SqlContext context, Boolean isAdd, Boolean setCredential)
at Microsoft.VirtualManager.Engine.RunAs.RunAsAccount.AddOrUpdateObjectInDB(SqlContext context, Boolean setCredential)
at Microsoft.VirtualManager.Engine.RunAs.RunAsAccount.UpdateDB(SqlContext ctx, Boolean setCredential)
at Microsoft.VirtualManager.Engine.RunAs.RunAsAccount.Update(SqlContext ctx, Boolean setCredential)
at Microsoft.VirtualManager.Engine.AuthorizationManager.SetRunAsAccountTask.RunSubtask()
at Microsoft.VirtualManager.Engine.TaskRepository.SubtaskBase.Run()
at Microsoft.VirtualManager.Engine.TaskRepository.Task`1.SubtaskRun(Object state)
------------- StackTrace from handler --------------
This is the call stack from where the exception was caught, not where it was thrown.
at Microsoft.VirtualManager.Utils.Diagnostics.WatsonReport.WriteReportTextFile(TextWriter reportFile)
at Microsoft.VirtualManager.Utils.Diagnostics.WatsonReport.Send()
at Microsoft.VirtualManager.Utils.Diagnostics.WatsonExceptionReport.Send()
at Microsoft.VirtualManager.Utils.Diagnostics.WatsonCenter.ReportException(Exception e, WERReportOptions options, String& localReportPath)
at Microsoft.VirtualManager.Engine.TaskRepository.Task`1.SubtaskRun(Object state)
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem()
at System.Threading.ThreadPoolWorkQueue.Dispatch()
-------------------- Assemblies --------------------
mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Location=C:\Windows\Microsoft.NET\Framework64\v4.0.30319\mscorlib.dll
Module=C:\Windows\Microsoft.NET\Framework64\v4.0.30319\mscorlib.dll
Version=4.0.30319.34014
BuildType=retail
Product=Microsoft® .NET Framework
VMMService, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\vmmservice.exe
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\vmmservice.exe
Version=3.2.7768.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
System.ServiceProcess, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceProcess\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.ServiceProcess.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceProcess\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.ServiceProcess.dll
Version=4.0.30319.33440
BuildType=retail
Product=Microsoft® .NET Framework
System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System\v4.0_4.0.0.0__b77a5c561934e089\System.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System\v4.0_4.0.0.0__b77a5c561934e089\System.dll
Version=4.0.30319.34003
BuildType=retail
Product=Microsoft® .NET Framework
TraceWrapper, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\TraceWrapper.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\TraceWrapper.dll
Version=3.2.7768.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Utils.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Utils.dll
Version=3.2.7768.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
NativeMethods, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\NativeMethods.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\NativeMethods.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.Common, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Common.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Common.dll
Version=3.2.7768.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.IndigoAccessLayer, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.IndigoAccessLayer.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.IndigoAccessLayer.dll
Version=3.2.7768.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
System.Core, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Core\v4.0_4.0.0.0__b77a5c561934e089\System.Core.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Core\v4.0_4.0.0.0__b77a5c561934e089\System.Core.dll
Version=4.0.30319.33440
BuildType=retail
Product=Microsoft® .NET Framework
Skuhelper, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Skuhelper.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Skuhelper.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Errors, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Errors.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Errors.dll
Version=3.2.7768.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Remoting, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Remoting.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Remoting.dll
Version=3.2.7768.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
System.Runtime.Serialization, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Runtime.Serialization\v4.0_4.0.0.0__b77a5c561934e089\System.Runtime.Serialization.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Runtime.Serialization\v4.0_4.0.0.0__b77a5c561934e089\System.Runtime.Serialization.dll
Version=4.0.30319.34230
BuildType=retail
Product=Microsoft® .NET Framework
System.Data, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Location=C:\Windows\Microsoft.Net\assembly\GAC_64\System.Data\v4.0_4.0.0.0__b77a5c561934e089\System.Data.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_64\System.Data\v4.0_4.0.0.0__b77a5c561934e089\System.Data.dll
Version=4.0.30319.33440
Product=Microsoft® .NET Framework
System.Configuration, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Configuration\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Configuration.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Configuration\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Configuration.dll
Version=4.0.30319.33440
BuildType=retail
Product=Microsoft® .NET Framework
System.DirectoryServices.AccountManagement, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.DirectoryServices.AccountManagement\v4.0_4.0.0.0__b77a5c561934e089\System.DirectoryServices.AccountManagement.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.DirectoryServices.AccountManagement\v4.0_4.0.0.0__b77a5c561934e089\System.DirectoryServices.AccountManagement.dll
Version=4.0.30319.33440
BuildType=retail
Product=Microsoft® .NET Framework
System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel\v4.0_4.0.0.0__b77a5c561934e089\System.ServiceModel.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel\v4.0_4.0.0.0__b77a5c561934e089\System.ServiceModel.dll
Version=4.0.30319.34230
BuildType=retail
Product=Microsoft® .NET Framework
Engine.Adhc.Operations, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Adhc.Operations.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Adhc.Operations.dll
Version=3.2.7768.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.TaskRepository, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.TaskRepository.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.TaskRepository.dll
Version=3.2.7768.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
ImgLibEngine, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\ImgLibEngine.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\ImgLibEngine.dll
Version=3.2.7768.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
VmmHelperHost, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VmmHelperHost.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VmmHelperHost.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
VirtualizationInterfaces, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VirtualizationInterfaces.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VirtualizationInterfaces.dll
Version=3.2.7768.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
NetworkServiceInterfaces, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\NetworkServiceInterfaces.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\NetworkServiceInterfaces.dll
Version=3.2.7768.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
ClusterUtil, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\ClusterUtil.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\ClusterUtil.dll
Version=3.2.7768.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
VMWareImplementation, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VMWareImplementation.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VMWareImplementation.dll
Version=3.2.7768.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.AuthorizationManager, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.AuthorizationManager.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.AuthorizationManager.dll
Version=3.2.7672.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.AuthorizationManagerTasks, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.AuthorizationManagerTasks.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.AuthorizationManagerTasks.dll
Version=3.2.7768.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.Backup, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Backup.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Backup.dll
Version=3.2.7672.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.BitBos, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.BitBos.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.BitBos.dll
Version=3.2.7768.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
System.Management.Automation, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Management.Automation\v4.0_3.0.0.0__31bf3856ad364e35\System.Management.Automation.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Management.Automation\v4.0_3.0.0.0__31bf3856ad364e35\System.Management.Automation.dll
Version=6.3.9600.17090
BuildType=retail
Product=Microsoft (R) Windows (R) Operating System
WsManWrappers, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\WsManWrappers.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\WsManWrappers.dll
Version=3.2.7768.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
SqmWrapper, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\SqmWrapper.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\SqmWrapper.dll
Version=3.2.7768.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.Deployment, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Deployment.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Deployment.dll
Version=3.2.7768.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.Placement.ResourceModel, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Placement.ResourceModel.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Placement.ResourceModel.dll
Version=3.2.7768.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.ImgLibOperation, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.ImgLibOperation.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.ImgLibOperation.dll
Version=3.2.7768.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
System.Xml, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Xml\v4.0_4.0.0.0__b77a5c561934e089\System.Xml.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Xml\v4.0_4.0.0.0__b77a5c561934e089\System.Xml.dll
Version=4.0.30319.34230
BuildType=retail
Product=Microsoft® .NET Framework
Engine.CustomProperties, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.CustomProperties.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.CustomProperties.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.VmOperations, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.VmOperations.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.VmOperations.dll
Version=3.2.7768.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.MomDal, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.MomDal.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.MomDal.dll
Version=3.2.7768.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
System.Web.Services, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.Services\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Web.Services.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.Services\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Web.Services.dll
Version=4.0.30319.33440
BuildType=retail
Product=Microsoft® .NET Framework
Engine.PxeServer, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.PxeServer.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.PxeServer.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.Placement, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Placement.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Placement.dll
Version=3.2.7768.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.P2VCommon, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.P2VCommon.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.P2VCommon.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
PatchExtractor, Version=0.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\PatchExtractor.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\PatchExtractor.dll
Engine.ConfigurationProviders, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.ConfigurationProviders.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.ConfigurationProviders.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
GatewayInterfaces, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\GatewayInterfaces.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\GatewayInterfaces.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Microsoft.Management.Infrastructure, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.Management.Infrastructure\v4.0_1.0.0.0__31bf3856ad364e35\Microsoft.Management.Infrastructure.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.Management.Infrastructure\v4.0_1.0.0.0__31bf3856ad364e35\Microsoft.Management.Infrastructure.dll
Version=6.3.9600.16384
BuildType=retail
Product=Microsoft (R) Windows (R) Operating System
Microsoft.CapacityManager.Modeling.Store.ModelLibrary, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Microsoft.CapacityManager.Modeling.Store.ModelLibrary.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Microsoft.CapacityManager.Modeling.Store.ModelLibrary.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.CustomPropertyTasks, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.CustomPropertyTasks.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.CustomPropertyTasks.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.UMOperation, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.UMOperation.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.UMOperation.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.Scheduler, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Scheduler.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Scheduler.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.Tasks, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Tasks.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Tasks.dll
Version=3.2.7672.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.ServiceOperations, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.ServiceOperations.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.ServiceOperations.dll
Version=3.2.7768.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
GoalState, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\GoalState.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\GoalState.dll
Version=3.2.7768.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.CloudService, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.CloudService.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.CloudService.dll
Version=3.2.7672.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
WSManAutomation, Version=3.2.7768.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\WSManAutomation.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\WSManAutomation.dll
wmiWrappers, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\WMIWrappers.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\WMIWrappers.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
System.Transactions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Location=C:\Windows\Microsoft.Net\assembly\GAC_64\System.Transactions\v4.0_4.0.0.0__b77a5c561934e089\System.Transactions.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_64\System.Transactions\v4.0_4.0.0.0__b77a5c561934e089\System.Transactions.dll
Version=4.0.30319.33440
Product=Microsoft® .NET Framework
System.EnterpriseServices, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
Location=C:\Windows\Microsoft.Net\assembly\GAC_64\System.EnterpriseServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.EnterpriseServices.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_64\System.EnterpriseServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.EnterpriseServices.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_64\System.EnterpriseServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.EnterpriseServices.Wrapper.dll
Version=4.0.30319.33440
BuildType=retail
Product=Microsoft® .NET Framework
System.Numerics, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Numerics\v4.0_4.0.0.0__b77a5c561934e089\System.Numerics.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Numerics\v4.0_4.0.0.0__b77a5c561934e089\System.Numerics.dll
Version=4.0.30319.33440
BuildType=retail
Product=Microsoft® .NET Framework
System.DirectoryServices, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.DirectoryServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.DirectoryServices.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.DirectoryServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.DirectoryServices.dll
Version=4.0.30319.33440
BuildType=retail
Product=Microsoft® .NET Framework
System.Management, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Management\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Management.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Management\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Management.dll
Version=4.0.30319.33440
BuildType=retail
Product=Microsoft® .NET Framework
--------- Extra Data for Watson Report -------------
Error Reporting Enabled=True
*** Extra Data ***
Process ID = 4356 (0x1104)
Managed Thread ID = 18
Native Thread ID = 5520 (0x1590)
MCITP | VCP4 | VCP5Hi,
You want userPrincipalName, not userPrincipleName.
http://msdn.microsoft.com/en-us/library/windows/desktop/ms680857%28v=vs.85%29.aspx
Don't retire TechNet! -
(Don't give up yet - 12,575+ strong and growing) -
Reports 6i to 10g Migration (Value Does Not Match mask 'MM/DD/YYYY'
Dear all,
I am Migrating Oracle 6i Reports to 10g. I am just compiling the 6i Reports in 10g Reports Builder and giving the
Report for Deployment after it got successfully ran in the report builder.
In one of the Report Report Query i am checking date range like below
WHERE lov_dte BETWEEN :L_FRM_DTE AND :L_TO_DTE
L_FRM_DTE and L_TO_DTE input mask is MM/DD/YYYY
i got the output in report builder and as well as from the application also but after the compiled the same report
in 10g and tested in server ..
i am getting the following error in server ..
REP-546:Value does not match mask 'MM/DD/YYYY'
ORA-01030:Date format picture ends before converting entire input string
REP-0091:Invalid value for parameter L_FRM_DTE
any body faced the same problem ...please help me to resolve this issue ..
I Tried Changing the Query to
WHERE lov_dte BETWEEN to_date(:L_FRM_DTE,'mm/dd/yyyy') AND to_date(:L_TO_DTE,'mm/dd/yyyy')
but still no use because iam getting runtime error ORA-01858 NON NUMERIC CHARACTER WAS FOUND WHERE A NUMERICA CHAR WAS EXPECTED.
Thank you all for Looking into my problem..
Data BoyDear all i found the document related to this problem in META LINK ..The Bug no is 5597464
The base of this Bug is 4589885
It is given that
Fixed in Product Version 11.0
but when i go to oracle site ..i cant find this version for Developer suite. can anyone please help in this
there is only Oracle Developer Suite 10g (10.1.2.0.2).
Thank you all for looking into my problem. -
hi,
I am performing the below operations:
1) Itemupdated event handler when a document is uploaded into the document library
2) Now amreading another list which is in the root site level so, i used spsite, spweb again and accessed that splist and trying to read single line of text column and user or group column.
Now when i am reading this, i am getting the error "Value does not fall within the expected range".
I went to resource throttling under central admin -->my current web appln and changed that value to 20 from 8
even after performing the above, i am getting the same error.
pls help anyone has faced this issue before.
Accessing a splist which is under root site collection within the itemupdated eventreceiver is allowed in SP ?hello sir,
as per my requirement i have to access a splist which is residing in the ROOT SITE COLLECTION OF THIS WEB APPLICATION. the event receiver i have written is residing in one of the few document libraries within the sub site. there are hundreds
of sub sites exist in this site collection. I need to access the root site collection within the itemevent receiver and access thatperson column from that splist. why i ahve kept this list at the root site collection level [
http://server1:2020/ ] , because this splist is the UI for customer's sp admin for performing weekly tasks. like adding few items in the splist and my event receiver fires and check this column- person /group
column ] and apply permissions on the document.
so my doubt is it possible to access the root site collection from my event receiver code.
spweb from properties web is just the subsite url and not the site collection. i want to get the root sitec ollection url's splist.
also am already running this code under runwithelevatedprivileges. -
Value does not fall within the expected range while passing a spfieldlookupvalue in a caml QUERY
i have to pass a column from master list -single line of text - and this will be the lookup of another column in another list
splist1---> column1 [ free text]
splist2--> column2 [ lookup column of the above list -splist1]
now am writing a caml query :
objDisciNodeQuery.Query =
string.Format(
"<OrderBy>" +
"<FieldRef Name='ID' />"
+
"</OrderBy>" +
"<Where>" +
"<And>" +
"<Eq>" +
"<FieldRef
Name='somecolumn' />" +
"<Value
Type='Text'>{0}</Value>" +
"</Eq>" +
"<Eq>" +
"<FieldRef
Name='column2' LookupId='TRUE' />" +
"<Value
Type='Lookup'>{1}</Value>" +
"</Eq>" +
"</And>" +
"</Where>", valueofsomecolumn, lookupidvalueofcolumn2);
SPListItemCollection splistItemAssocCollec
= null;
splistItemAssocCollec = splist2.GetItems(objDisciNodeQuery);
here it throws Value does not fall within the expected range
Anyone has idea why i am getting this error, .
any ideas are appreciated.We can use lookup column in caml query link this
<Where>
<Eq>
<FieldRef Name=’Departments’ LookupId=’TRUE’ />
<Value Type=’Lookup’>10</Value>
</Eq>
</Where>
Multi lookup column reference
http://naimmurati.wordpress.com/2013/12/03/multi-lookup-fields-in-caml-queries-eq-vs-contains/ -
New field in ODS - data value does not flow after activation
Hi,
We have an ODS with some data in it. Now i added a new key figure to the ODS and changed the transfer and update rules accordingly.
The value for this key figure appears in the PSA and the ODS table *40 (before activation table), but after activation the value does not flow to the activated ODS table *00.
Any idea why this is happening?
Pl let me know.
Regards,
PradhibaHi Pratibha
I did not found anything wrong with key figure 0OI_WRBTR in BW system.
Please check the contents of active table in *00 table using SE16 and also using tcode LISTCUBE.
I hope you are not selecting wrong key figure while looking at active data of ODS.
Regards
Pradip -
Data type of the base attribute or the base value does not match...
...the assigned expression.
Hello all,
I always get the Error
+<ERROR+
TEXT="'DWH.CUB_REGISTRATIONS_AW.REGISTRATIONS': XOQ-02517: Der Datentyp des Basisattributs oder der Basisgröße stimmt nicht mit dem zugeordneten Ausdruck überein.
XOQ-01400: Ungültige Metadatenobjekte"/>
The English message must be something like this:
The data type of the base attribute or the base value does not match the assigned expression.
when I run my mapping. The attribute REGISTRATIONS is NUMERIC (12,2) in the Cube and I map a NUMERIC(12,2) constant in it.
I use a simple OWB-Mapping for loading, but I don't understand why it doesn't function. Other mappings where the attributes are out of a
table I put in a cube are running well.
I tried different things, but nothing fixed my problem. Any idea ?
Thanks a lot for help
MichaelTechnically this is a 'warning' from the server, not an 'error'. This means that the change you made should have been submitted, but you get an warning message on the client. AWM would suppress this warning, but evidently OWB does not. Can you switch to use AWM?
Here is the definition of the warning along with 'cause' and 'action' sections. (Unfortunately these sections are not translated into German for some reason.)
>
02517, 0, "The data type \"%(1)s\" of the base attribute or base measure is different from the mapped expression \"%(2)s\"."
// *Cause: Either the base attribute or base measure with the mapped expression was set to an inconsistent data type, or it was mapped to an expression of a different data type from its fixed data type.
// *Action: When changing a mapped expression for a base attribute or base measure, ensure that the expression has the same data type; otherwise, set the data type of the base attribute or base measure to NULL first. When a base attribute or a base measure has an existing mapped expression, do not set it to a different data type.
>
It is probably safe to ignore this warning, but if you can post the relevant XML for the cube, then will probably be able to spot the problem. I assume that REGISTRATIONS is a measure in the cube CUB_REGISTRATIONS_AW, so this is what you can look for in the XML:
(1) The definition of the base measure along with the datatype. It should be something like this
<Measure>
<BaseMeasure
SQLDataType="NUMBER(12,2)"
ETMeasureColumnName="REGISTRATIONS"
Name="REGISTRATIONS">(2) The mapping info for the measure, which should looks something like this:
<MeasureMap
Name="REGISTRATIONS"
Expression="...">
<Measure Name="REGISTRATIONS"/>
</MeasureMap>I don't know if you can get the XML directly from OWB. If not, then DBMS_CUBE.EXPORT_XML should work (assuming you are in 11.2). You could also attach AWM and save the cube to an XML template. -
Brand spanking new Sharepoint 2010 RTM and Designer 2010 RTM install. Unable to edit any page whatsoever even when checking out. Error in SP Designer: soap:Server was unable to process request. ---> Value does not fall within the expected range.
Like I said, this is a brand new RTM install with nothing altered yet. Why can't I edit any pages? I am using the highest credentials so there should be no permission issues. There isn't anything that is helping me on the Web for this.
Why would I encounter a problem like this out of the box? This is not the beta - it is RTM!Go to :
Site Collection Administration
SharePoint Designer Settings
and Enable the following
Enable Detaching Pages from the Site Definition
Enable Customizing Master Pages and Page Layouts
Enable Managing of the Web Site URL Structure
This should resolve the SP Designer Edit Issues. -
FTXP-error-Domain MWART fixed value does not exist- Message no. F4341
Hi,
I am trying to created a new record for a tax code, and i get this error
Domain MWART fixed value does not exist
Message no. F4341
I looked up OB40, and not sure how to fix this. Do you know how to check the tax codes? How to validate OB40?
Thanks.Hello,
Please follow this procedure for the input tax codes which experience
the error F4341:
1) Go to SE16 and enter table T007A
2) Hit enter and in the next screen choose the following parameters
and enter values that represent the tax code for input tax which are
encountering the problem.
KALSM (tax procedure)
MWSKZ (tax code)
3) Click on the "execute" button.
4) Take special attention to column MWART which represents tax type.
This should only have a value "V" to represent input tax (or "A" if
output tax).
5) The cause of the error F4 341 is when this column does not contain
any value or is blank. Which means that there is no defined tax type
"A" or "V" maintained in customizing.
6) To correct this you should maintain the value again via FTXP for the
corresponding tax codes and complete all the customizing settings
relating to tax on sales and purchases thereunder. Afterwhich you
should no longer experience the error message.
Regards,
REnan -
Sharepoint2010: ArgumentException: Value does not fall within the expected range
I have a lookup column 'usertype' in one of my list, that is lookup for another list. and in my code when i try to access this column,
item["usertype"]
i get an error: ArgumentException: Value does not fall within the expected range.
I tried with Lookup Resource Throttling in Central Administration. But still i am not able to access this field. And this field is not programmatically created.
Any idea to solve this..
Thanks in advance.Hi Hemendra,
In the "Course " List there is a lookup field "CourseType"
which is lookup to a list having two values "Internal" and "external"
Here is my code:
SPList Course = Helpers.GetList(web, "Course");
SPListItemCollection Mycourse = Helpers.GetListItemsByField(Course, "Course_x0020_Code", "001");
string CourseType=Mycourse[0]["CourseType"].ToString();
"Helpers.GetListItemsByField" method will return proper result using CAML query. So Mycourse[0] will have all the fields except the one which i mentioned above. There are other Lookup fields in the same list and all works fine. (Assume Mycourse
will always have exactly 1 row.)
Regards,
Vikas
Maybe you are looking for
-
Need some information on resolving this issue or how to resolve. I am not sure what this error is: CAPWAP-3-AP_DB_ALLOC: capwap_ac_db.c:144 The system is unable to alloc AP entry in database. If anyone can shed some light on this and provide some
-
User exit or everuthing else at save on project in CJ20N
Hi, In CJ20N, I must change the value of PROJ-VERNR according to a value of a specific field (also specific field of the table PRPS) in the WBS screen when I save the project. I would like to know if there's an exit user (or anything else : enhanceme
-
Creating unique names for virtual copies
I utilze three different sets of images for most jobs: the raws, the thumbnails I upload for client review and the jpgs I send out for prints. I like to match the filenames so there is no confusion. Unfortunately my gallery (smugmug pro) also assign
-
Need Urgent help in passing items from one page to another
Hi I have a page with item "X" holding a value. The page displays a report in which one of the fields "Devide name" is a link to Interface page. By clicking the link on "Device name" Im passing the value device name to another page and displayes all
-
Mac OS X 10.6.8 statup problem: desktop goes black 10 secs after booting, can remain apparently asleep for 15 mins. I can't prompt it to wake, until recently it would wake when peripheral were added (earphones). What is wrong, and how can this be fix