Last year I updated my system to OSX 10.9.1. Ever since whenever I type an email message it is saved multiple times (sometimes dozens, if the message is long) in multiple places (Saved, Trash, etc.) Any cure?
Last year I updated my IMac system to OSX 10.9.1. Ever since whenever I type an email message it is saved multiple times (sometimes dozens, if the message is long) in multiple places (Saved, Trash, etc.) Any cure for this annoying (and growing) problem? Thanks.
You have Sophos installed, which is certainly capable of causing panics. However, the panic logged above happened in safe mode, and wasn't caused by any third-party software. That type of panic is usually caused by a memory fault.
If your model has user-replaceable memory, and you've upgraded the memory modules, reinstall the original memory and see whether there's any improvement. Be careful not to touch the gold contacts. Clean them with a mild solvent such as rubbing alcohol. Aftermarket memory must exactly match the technical specifications for the model.
Apple Diagnostics or the Apple Hardware Test, though generally unreliable, will sometimes detect a fault. A negative test can't be depended on. Run the extended version of the test, if applicable.
Similar Messages
-
I entered new fields in a form that was created last year to update it. However, now when I view the responses, the headings are listed as Column 1, Column 5, etc. rather than the name of the heading. Can you please help?
Hi Mike,
CRSE is an OEM Product and for use with a custom application they have written. Unfortunately we don't their reports or how they are connecting, it would appear they were originally built off a SQL and then set to a Dataset in the app or they could be adding the data source at runtime. Lots of variations and without access to the source code to see what they are doing not much we can help you with.
You need to contact the OEM Partner for help in resolving this and find out what you can and need to do to update your SP and work with their canned reports,
Thank you
Don -
Since last weekend (3-15-15) I have been unable to send/receive text messages with a friend who has Sprint service. The messages send with no errors on either side, but neither side is receiving the messages. It seems to be only this one person affected by this issue, everyone else that I've tried sending messages to has responded with no trouble. Is anyone else having any similar issues?
Retrohacker, Your text messages are too important to be missed! Let's figure this out, together. Are you able to successfully make and receive calls from your friend? Which phone do you have with us? Any new messaging applications or changes that you can recall on the phone since this issue began? Please share details so we can get to the bottom of this for you. TanishaS1_VZW Follow us on Twitter @VZWSupport If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!
-
my ipad2 is unable to find wireless network(s). while at home I am able to connect my MacBook and iPhone to network but am unable to connect iPad. I have restarted the device multiple times and even reset the network and all settings but still no luck
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
i can no longer shoot directly into phaseone software - neihter version 6 or 7 - since i use my new macbook pro with retina display. pictures are not transfered from the camera into captureone. anyone else with this problem? any solutions?
My eyes just glazed over...Please in the future break down each of your issues with paragraphs separated by two carriage returns. It would be much easier when trying to address your issues.
Go to Apple menu -> System Preferences -> Keyboard and Mouse -> Mouse
And edit your mouse settings to do what you want it to do.
Secondly, this is not the place to vent. If you have a complaint, there is:
http://www.apple.com/feedback/
or http://www.apple.com/contact/
We are just end users here helping other end users.
Third, from my understanding, it would appear you are concerned about the noise the hard drive makes when it falls asleep? Why not put your machine in screen saver mode instead? Apple menu -> System Preferences -> Energy Saver turn off all Energy Saver settings, or set them to run Never.
Fourth, if your machine was purchased just a few days ago, you may still be able to get an exchange from the store, quicker than you can get a repair done. You may want to look into that possibility.
Fifth, it does appear you found the Logic forum. I would persist in asking there how to solve your technical issue with Logic regarding the audio. It may be you don't have to do anything special to the hard drive. Remember audio can be transmitted by wire, avoiding ambient sounds.
Good luck! -
Hi I just got my iPad 2 and updated it to ios7 . Here is my problem: my Chinese input doesn't work , I need to restart every time . Is it the problem of the iPad? Or iOS 7??
Hi Eric Ferguson,
Thanks for using Apple Support Communities.
For troubleshooting on this, take a look at this article:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/ts3694
Error 13, 14, 35 and 50 (or -50)
These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network.
Best of luck,
Mario -
I have a "firmware file not compatable" message whilst trying to update my iPhone4 from Sofftware Version 5.1 to 5.1.1 via iTunes. I have tried about 3 times and keep getting the same message. Any ideas/suggestions?
Since posting the above - I have now tried downloading the update on my iPhone rather than via iTunes, and its just worked and installed and seems fine! Was a lot quicker as well than the download time via iTunes
-
I copied message to SMS field and sent. After that the message still exist all the time in the SMS field. When I open the application I must always first delete the “saved” ones before I write the new one. What to do to finally/definitely delete the save message?
sorry it's ios6
-
Hi, I have just had the message - download itunes again as you cannot burns cds etc - this sometimes happens said the message. So I removed itunes and downloaded it again and now when I click to open it says 'itunes library .it' cannot be read as it was created by a newer verson - help!
See Empty/corrupt iTunes library after upgrade/crash.
tt2 -
The inbox for Mac Mail lists every incoming message twice. When I delete a message it deleted both entries. I have tried the solution in "help" and it doesn't work. Any suggestions?
I am wondering if anyone is seeing my question? This is my first time and I am not sure if I am communicating correctly. If you are seeing the question above regading deleted messages reappearing please reply so I will at least know I am getting the message out.
Thank you. -
When someone messages you from their iPhone or iPad you receive the message to your iPhone or iPad but you don't know whether it is from their iPhone or their iPad. That needs to be updated.
Why does it matter?
It's the person who sent the message that is important, not which particular device they used to send it, surely?
When someone calls you from their home landland, is it necessary to know whether they're calling you from the phone in the kitchen, or the one in the bedroom? -
Can anyone help me to download Java 6 update 11 to my OSX 10.6.8 Mac Mini? Where do I find the software on the Apple site?
Clone your system.
Install the 10.6.8 Java update.
Clone back from your clone you made before installing the update when finished. -
When I attempt to open a PDF file I saved from a website using Safari, I get the message "There was an error opening this document. The file is damaged and could not be repaired." When I save the same PDF file using FireFox it opens up immediately. Is there any way to correct this problem with Safari?
Back up all data.
Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again. -
I have updated my Mac to OSX 10.9.1. All text in the bars have been decreased in size after the installation. How can I get back the former size?
In the iCloud preference pane, sign in to the same account you use on the other devices, if you haven't already done that. Then check the box marked Contacts.
-
when i initially open firefox, this is what pops up. This type of thing pops up multiple time per website.
Firefox
wants to connect to snippets.mozilla.com on TCP port
443(https). show details
its asks me if i want to allow" or Deny"
Similar pop ups come up continuously during my time on each site.Firefox and other browsers would need access to ports 80 and 443 to work. I think you may want to enable port 80 and port 443 (when it asks) and choose '''Forever''' or at least '''Until Quit''' for a smoother experience. If you believe you downloaded Firefox from a safe site like mozilla.org and your PC is safe (like, there is no other rogue app that can hijack Firefox) then there shouldn't be cause for concern to give it '''Forever''' exception on ports 80 and 443.
edit:
"however it was working fine, until all of a sudden"
This may happen if Firefox was updated, because the old signature or hash stored by the security application for Firefox would change. This may also mean that the previous version of Firefox already had unhindered access.
Maybe you are looking for
-
Where do we pass tax condation type and condation value in this bapi: SD_SALESDOCUMENT_CHANGE
Hi Experts, I am using this to change sales order. SD_SALESDOCUMENT_CHANGE I am passing condation type and condation values for each line item under table parameter CONDATION_IN. Here in which fields do i need pass tax condation type and condation v
-
Setting dynamic default values in a list/menu
To save problems with inserting dates into a Mysql database, I have split the input fields on the file insert form into three drop down lists containing the day, month and year. In order to make it easy for users, I wish to take the current date, spl
-
How to change/set the browser title from web forms (XP platform with SP2)
I am running Form9i, I have set the browser windows title from Web Forms dynamically by using following method. However, when my PC has changed to XP, the function seems not work. Does anybody have same problem and how to solve it? Any suggestions wo
-
Payment Due Date selection in F110
Hi Experts, We have defined a payment term with 2% discount in 30 days time. We take the baseline date form the shipping date via substitution. We execute the payment run two times in a week. Now say if the shipping date is 03.08.2010 then due date f
-
Insert multiple Rows at a time in Table control.
I am Doing Dialog Programming, In Table control I have to insert some values, by clicking on INSERT Button, so now its allowing only single rows to edit.. But as per my requirenments "I want atleast 10 Rows should be editable,at a time when user cl