LastDataRefresh(ROLLUPTIME)-does not show correct date for multiprovider

Hi,
The Last data refresh (Rolluptime) shows incorrect date for multiprovider and we use lot of multiproviders.
Removing the last data refresh from the "Information" button of the Bex Web Analyzer which is using the "Information field web item",  shows an empty space and a colon ":" and an empty box.
Please let me know if there is any other way to remove the last data fresh without showing the empty space.
We are on SPS 7 and FEP 7. Is this problem still exist in SPS 8/FEP 8?
Thankyou,
-Sini
Message was edited by: Sini Kumar

Depends on your definition of correct. Your initial question was that this time does not display. This time should display. For a multprovider, it uses this formula
first(last(<All InfoProviders under Multi - ROLLUPTIME>))
It uses the earliest rollup time from the last rolluptime of all the base providers.

Similar Messages

  • Search Item drop-down does not show any data for Advanced Search.

    Hi,
    I have a requirement to add a new criteria to the existing Advanced Search region of 'My Employee Information' in Manager Self Service responsibility. I substituted the AdvancedSearchVO to include the new column. Using personalization i did the below steps to show the new column in the page,
    1) Created a 'Message Styled Text' item under Table Layout region to display the result. I associated the View Instance (AdvancedSearchVO1) and View Attribute (AttrColumn).
    2) In Advanced Search Panel created a new CriteriaRow and set the 'Search Allowed' property to True.
    3) In Advanced Search Mappings i tried to create the new mapping but the Search Item drop-down does not show any of the CriteriaRow item. But Results Item shows the 'Message Styled Text' item created in step 1 above.
    Any idea what i would be missing becasue of which 'Search Item' property does not show any data?
    I am using OAF version 12.1.1.
    Thanks, Suresh

    Hi,
    I faced the same situation but i still waiting for the solution.. this is my problem's thread..
    Addition of LOV Search Filter using Personalization
    But when i tried to create a new custom page with advanced table and created a new LOV column via personalization. i was able to create new search mapping.. but this is not happening in the seeded page case :(.
    I m also looking for solution...if any one can provide some inputs on it , will be highly appreciated.
    Thanks
    Renu

  • Discoverer Report opened from Portal does not show correct data

    Hi,
    When I try to open a Discoverer report from a portal that I created, it shows stale data but when I click on "Analyze", it shows all the data correctly.
    Does anyone know what the reason could be for this?
    Thank you,
    Santoshi

    I assume you used the Discoverer Portlet Provider. A discoverer portlet is never live data. When you define the portlet you specify how often to 'refresh' the data. If you skipped this step, then you just get the data as-of when you created the portlet.
    Generally you specify the refresh time to be sometime after your usual database load completes.

  • Export to PDF from Infoview does not show correct data - CRS 2008

    I have a problem where users attempt to export a report from the Infoview interface to a PDF.  The report shows correctly in Infoview while in Crystal Reports format, but when the use exports the data, the data changes and shows different values.  To troubleshoot, I have tried this on different clients - without a change in the result.  I have also pulled the latest instance of the report from this history on the Central Management Console.  Interestingly enough, the same thing happens when I export to a PDF from there as well.  Any insight or help would be greatly appreciated.  Thanks!

    Hello,
    I can't tell you offhand on what the issue is here, as various factors come into play.
    Here are a few troubleshooting steps you can try:
    - Try opening the report in Crystal Report designer and export to pdf from there. Does this work?
    - Instead of viewing the report and export; schedule a report to PDF and check the results.
    - there is currently a know issue in regards of certain formulas and using font type "arial Unicode MS" that gives incorrect export to pdf. Maybe alter the font used.. or see if you take out any questionable formulas and try again to export.
    Regards,
    Duncan

  • Webi does not pick correct Data

    Hi Guys,
    I have a webi. The Universe for the Webi is based on  Bex Query. I see correct Data in Bex Query but when I create a webi report it does not pick correct data.
    I have checked following points already:-
    1] No Resstriction at Query Level
    2] No restriction at Universe Level
    3] No Filters/ Restriction at Webi Level.
    Can anyone suggest whats happening?
    Regards

    Hi Ray,
    It happens sometimes that data gets aggregated over all the dimension objects present in the 'Available Objects' section in webi.
    Try to pull only the characteristics present in the row section of the bex query say 'X' and measure in the column section of bex query say 'Y' into the results pane in the edit query window in webi.Then run the report and check.
    This will give you the idea about aggregation.
    Regards
    Vineeta

  • The web site of Adobe does not show correctly in FireFox

    I have a bizarre problem.  The site of Adobe (including where I can download the flash player) does not show correctly in FireFox and I only see it as a text HTML page, but without most images (typically, for instance, I do not see the image "Download now" but see a text line "Dowload now", and so on...
    This seems to specifically affect the Adobe web site as I have no problme for other web sites (so far).
    It is something specific to FireFox as  I do have the problem with Internet Explorer.
    The problem persis even if I restart FireFox without any add-on (safe mode).
    Any suggestion ?

    Does this only happen in Firefox?  What do you see with Internet Explorer or Chrome?  If it is only Firefox, I'd try these steps in this order:
    1. Clear your cookies and cache
    2. Reset your Firefox settings
    3. Make a new profile
    Chris

  • Sometimes JavaFX form (BorderPane) does not show correctly

    We have a problem with a JavaFX application running on Java 7. Sometimes a form (BorderPane) does not show correctly – it seems to be transparent (i.e. content previously shown at the same place is still visible). Controls seem to be present and respond to events – e.g. we can close the form by blindly clicking the appropriate button. Once the issue happens it is persistent, i.e. next time we open the form, it behaves the same.
    We have no reproducible scenario leading to the issue. It just happens here and there – we have not been able to identify any pattern yet.
    Additional information:
    the form (BorderPane) is loaded during application start-up but it is not shown initially,
    to show the form we remove previous contents from a StackPane and add the form instead,
    to hide the form we do the reverse.
    Do you have any ideas how to diagnose the problem? Where to look first? What kind of diagnostic code could we put in the application that would help us?

    I am unaware of any such issue being reported previously.
    Without a reproducible test case, you are unlikely to get much assistance.
    Other than the creation of a minimal test case which reproduces the issue, I could not even advise how you might go about diagnosing and fixing your issue.
    There were many bug fixes implemented for Java 8.
    I advise you to upgrade your test environment to the latest Java early access release (currently Java 8u40) and test to verify if your issue replicates in that version.
    If the issue still reproduces, create a bug report which includes your test case and full environment details.

  • Onlive TV listing does not show HD listing for series when I try to create a recording

    It happened now already several times the the "Online TV Listing" does not show HD listing for series when I try to create a recording. Instead, it will show two series options in SD. Is this to make people use less bandwidth?
    Here is what I am doing:
    I go to this link  https://www.verizon.com/fiostv/myservices/members/fiostv.aspx
    Then to ...........DVR Manger
    select  ...........Record A Show
    I type search e.g. Nathan for You
    I click on ........Search
    and I select ......Click here to Show Details
    Then I get to chose from 2 (the same) SD channels.
    Nathan for You
    190 Comedy Central
    Tue, Jul 29 10:30 PM
    Record Show Record Series
    Nathan for You
    190 Comedy Central
    Tue, Aug 05 10:30 PM
    Record Show Record Series
    But there is the same on channel 690 HD!
    This happens not only to this particular channel!
    I remember it used to show also the HD channels.
    The only way to schedule in HD is to find the listing in the TV schedule, at the right time and there you will get the
    correct choices for both SD & HD.
    Can this be fixed?
    Thanks!

    On the right click on HD under video quality to filter it. 

  • Site does not show correct on Samsung Tablet

    Hi all,
    I've seen a few questions regarding Muse sites not being displayed correct on a Samsung Tablet. My problem is similar but still different. The site is displaying correct on the desktop/ipad/iphone but not on the Samsung Tablet.
    In the previewt his is not shown. Now I also know that the preview more or less simulates how a site should look.
    This is the site: www.uwpersoonlijkeoptieadviseur.nl (a dutch site).
    I have looked at the links and they seem to be ok. I mean all the links link to the Tablet version.
    cheers,
    Larry

    Hi sanjit, the thing is that on a samsung tablet from around 3 years old the problem occurs. But on a samsung tablet almost a year /2years old the site displays correct.
    Both of them has got android 4.04
    See the image with the specs in which it loads correct.(white background)
    And here the specs of a older one (dark grey one And arround 3 years old)
    And this problem occurs:
    So on a newer tablet it shows correct.
    Verstuurd vanaf mijn iPhone
    Op 1 apr. 2014 om 17:22 heeft Sanjit_Das <[email protected]> het volgende geschreven:
    Re: Site does not show correct on Samsung Tablet
    created by Sanjit_Das in Help with using Adobe Muse CC - View the full discussion
    Hi Larry
    Please let me know if there is any specific page element not showing up correctly on Tablet.
    Also which browser are you using , browser version would help. Do you see the same problem with any other browser on same tablet.
    The device details would also help.
    Thanks,
    Sanjit
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6261109#6261109
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6261109#6261109
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6261109#6261109. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Help with using Adobe Muse CC at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Dreamweaver codes does not show correctly

    Hi, i have a problem with dreamweaver.
    İ use last version Adobe CC. When i use dreamweaver for my job, codes does not show correct.
    look ss please. letters cut of middle. look letter "g" "j" "y "   Look MysQl letter. you see "y" is cut of
    Thank you for help.

    Are you using frames?
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "David Powers" <[email protected]> wrote in message
    news:f9hns3$soa$[email protected]..
    > FlashRenaissance wrote:
    >> When I try to preview my .html pages in Dreamweaver
    8 it does not know
    >> the page. The only thing that shows up is a page
    that "Cannot be found"
    >> with a strange extension (TMPztriqmk5y3.htm).
    >
    > See the TMP at the beginning? It stands for temporary.
    >
    >> Any suggestions on how I can get the pages to show
    up again in preview
    >> mode? Maybe something went wrong in the preferences?
    >
    > Go to Preferences, select Preview in Browser, and
    deselect the option to
    > preview using temporary files.
    >
    > --
    > David Powers, Adobe Community Expert
    > Author, "The Essential Guide to Dreamweaver CS3"
    (friends of ED)
    > Author, "PHP Solutions" (friends of ED)
    >
    http://foundationphp.com/

  • After upgrading to iOS 8, the weather app does not show up results for any of the Indian States/cities

    After upgrading to iOS 8 on my iPhone 5, the weather app does not show up results for any of the Indian States/cities. Can Apple look into this or does anyone have a solution to this.

    Swipe from bottom of days listed ("Wednesday, Thursday, Friday, etc")  upwards.  I thought it was gone too but it's still there~just takes different way to access it.

  • Bex report does not show loaded data at once

    Hi experts,
    Why Bex report does not show loaded data at once after loading is finished but after some time?
    Could be the reason of it:
    a) huge amount of data in infocube.
    b) there are no deleting/creating indexes before/after loading, because it takes too much time
    c) anothe reason?
    Thank you,
    Tigr_Z

    Hi Tigr,
    A and B both can be the reasons behind, but normally in case of B option the results on report output can be wrong like duplicates sort of showing you double figures.
    C - it can be resource issue, so please look into all and double check with basis if thats the case.
    Regards
    Sunny

  • Report S_ALR_87012000 Asset Register does not show correct values sums

    Hi,
    I've taken a look at S_ALR_87012000 transaction - Asset Register (Italy) after an Assets Data transfer and something strange happens:
    1-  the sum of column Depreciation for year is not correct. It is a little bit strange because the single assets depreciation for year is correct. The same problem is in report S_ALR_87011990  - Asset history sheet
    2- if I put  an asset number range or the asset class in the report selection screen the report does not show some of the assets included in the range or in the asset class.
    Could you explain me why? Is there some program bug?
    Thanks in advance
    Giovanna

    Hi
    If you are executing the reports for previous / future years - execute them as of last day of the fiscal year
    The execution for current year can have any date of the fiscal year for report execution
    BR,Ajay M

  • :: NWA does not show table view for monitoring reports ::

    Hi,
    We are facing an issue in one of our portal system.
    I click on Portal index page, then I go to Net weaver Administrator --> Monitoring --> Java system reports.
    Here I get the resource utilization graphs.
    The graphs show proper values however when I click on table view it does not show any value or table at all.
    Then I click on Settings button, and click on Persistent radio button.
    It asks to enter the number of days for which the the data should be stored.
    I gave it as 2 days and click on Apply button.
    It shows a message saying "changes would be effective after restarting monitoring service".
    However when I go there i.e. NWA --> Administration --> Applications
    I get below services
    cafruntimemonitoring~ear                 
    com.sap.ip.bi.sdk.monitoring                 
    tclmwebadminmonitoravail~wd            
    tclmwebadminmonitorcomplib~wd            
    tclmwebadminmonitorprovider_ear            
    tclmwebadminmonitorstate~wd            
    tclmwebadminoverviewmonitoring~wd           
    tcmonitoringsysteminfo
    Would you kindly suggest which service from above list should be restarted ?
    Thank you, Regards,
    Girish Garje.

    I think what is being asked is "How do I expose a database view as a schema table in Configuration Manager?"
    This is accomplished by creating a database view within the WCC database schema (and with the WCC schema user as the view owner). The view then will appear as a table in the "table" tab in Configuration Manager.
    One caveat in 11g is that the user created by RCU does not have any privileges to read/create views in its own schema. You may need to grant privileges to views for the WCC schema user before this will work.

  • Discoverer Viewer not showing correct data when scheduled

    Hi All,
    I have a bit of an ongoing issue and cannot find an answer through Oracle.
    We have an issue that when a cross-tab workbook is run manually in Desktop this returns correct data, when scheduled in desktop it returns correct data in desktop, but when opening the scheduled workbook in viewer, incorrect and irrelevant data is returned
    Here is a little information on the field that is not returning correct data;
    The field is based on a calculation, the calculation (lets call BOB) contains PL/SQL function concatenated with an NVL calculation, this other calculation is a DECODE. I have been playing with changing the content of the BOB calculation, by removing the PL/SQL function and the DECODE calc from BOB and scheduling the report, the data is returned in viewer, in fact i've attempted one without the other and this still does not return the correct data.
    This version of discoverer that is not returning data is V 10.1.2.50.05. I've tested this on a later environment with Discoverer V 10.1.55.26 and the data is returning correctly through the sceduled report in viewer.
    My questions;
    1. Has anyone ever come across something similar to this in version 10.1.2.50.05
    2. Is there any detail available regarding what upgrading to 10.1.55.26 offers?
    3. Know any workaround for using PL/SQL calculations in a scheduled workbook? I am aware that not aggregable items will not be returned in v11 when scheduling workbooks.
    Many thanks in advance for any help.
    Simon

    Bumping this thread
    Thanks
    Si

Maybe you are looking for