Late 2005 G5 Monitor Options

I ran twin 22" Cinema Displays since 1999, and one went south with the infamous two short, one long flashes. Tried switching/reconnecting, but no change-- it's the monitor.
I assume my original 6600LE video card won't run a 30 inch at high resolution, but are there any monitors in the 24 to 26 inch range that will run well with my current set-up? If not, with an upgraded video card?
With a larger monitor, I might retire the two monitor system. 90% of my work is writing, with 3 or 4 docs open and in view. I do some video editing, but I don't need perfect colors like a graphics designer.
Thanks for any tips.

Hi-
The 6600LE has one dual link DVI and one single link DVI.
You can run a 30" monitor at optimal resolution of 2560 by 1600 connected to the dual link DVI.
So, get the monitor that you want.

Similar Messages

  • I I have a late 2005 power PC G5 that I want to bring back to life.  I need to replace the original hard drive, a Maxtor 250 GB Sata.  Can I replace it with modern drives, SATA 5-6 etc?

    I have a late 2005 power PC G5 that I want to bring back to life.  I need to replace the original hard drive, a Maxtor 250 GB Sata.  Can I replace it with modern drives, SATA 5-6 etc?

    I knew I should never get rid of my old G5's.  By the way, there is a browser still supported for the PPC, TenFourFox, if you're not using it already.  Go to the Floodgap website (they author it)  download it for free.  The only thing it doesn't support is the Flash plugin, but the browser works great. Other video types are supported.  It's based on Firefox, and runs most of the plugins and add-ons. It's very fast, and beats all other browsers on the browser compatibility and speed test.  That's now my default on my G5's.  Firefox and Safari are no longer supported.  As far as the OS, both Tiger and Leopard were solid for me.  The reason, as I stated before, was iMovie.  The version in Tiger with iLife was far superior to what Apple changed it to.  They 'dumbed it down' for the masses.  Even the newest iLife 11 on my Mac Pro quad isn't is good, in my opinion.  So Leopard should be fine for you.  It's a much larger browser in terms of sheer megabytes and disk space, but it's fine.  As far as getting an OS disc, I'm seeing Tiger for about $45.00, Leopard for $50 - 60.00 on that famous auction site.  As far as RAM, I have 8GB in my G5 2.3, but you should check Activity Monitor when you are running your apps.  See how much green slice you have left (unused RAM).  You might find you don't need eight.  A Mac Pro will grab more free RAM than a PPC machine will.  I have a hard time maxing out use of my 8 on the PPC.  Not true with the eight on my Mac Pro.  The OS doesn't hesitate to grab and use it.  You might be OK with 6GB on your PPC. More will not make you faster, as long as you still have free RAM available.  As far as backup on your resurrected machine:  look for a firewire enabled backup if can.  Use CCC (Carbon Copy Cloner) and make a clone backup.  Next time your PPC machine wipes out the hard drive, just take your Firewire drive and plug it into another PPC machine, and you can select it as your boot drive. You'll be back and running in five minutes.  You can also take the physical drive out of your enclosure, and put it in your tower to replace the failed drive, and you'll be back to where you were in less than ten minutes, OS and all.  The PowerMac has an 800 port, so you can do the 800 on the machine to an 800 port on your backup. A firewire 800 to 800 cable is only about $8.00.  It runs nice and fast through the 800 port.  I like the OWC Mercury Extreme enclosures.  They use USB, Firewire 800, and eSATA, so all your options are open.

  • I have a Late 2005 (Power PC) G5 running 10.5.7 that I purchased used from

    Hi all,
    I have a Late 2005 (Power PC) G5 running 10.5.7 (13 GB ram) that I purchased used from a company online that refurbishes and resells off-lease machines. It worked great until a few days ago when I came back to it frozen. It had a pixelated pattern over everything, and would not force quit, so I held the power button in to shut it down. Ever since, I still get the pixelated display, and it will not get past the startup screen. The progress indicator (under the apple) twirls for a bit, and then stops. Then nothing happens. Fans are quiet, I tried pulling out sticks of ram & swapping, hit the reset on the board, removed & replaced the battery & reset the pram. I can get the drive to come up remotely in target mode, repaired permissions and ran disk utility - says the disk is OK. Video card? Logic board? Something totally obvious that I am missing? I bought used because I am on a limited budget, and now, 6 months after my purchase, I have an expensive paperweight and had to go back to my trusty but slow dual 1ghz G4. This is really killing me personally, and productivity wise. Any insight or suggestions would be greatly appreciated!! Please let me know if there is any info I have not provided. Thanks in advance!!!

    Can you boot the machine from the Leopard installer DVD without issue? If so then perhaps the OS just needs to be reinstalled. This is something you can do without erasing the drive:
    How to Perform an Archive and Install
    An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
    1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
    2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
    3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
    4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
    5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
    6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.
    If you have the Apple Hardware Test disc for the computer, then you can boot from it and run the hardware diagnostics.

  • Upgrade video card for Late 2005 PowerMac G5

    I am looking for an upgrade video card for a Late 2005 PowerMac G5, which has the PCI-Express slots. I need at least 256 MB of VRAM.
    Since this computer is a discontinued model, there doesn't seem to be too many options for video cards. I've seen some cards like the NVidia 6600 or 6800, or even ATI's X800, but they appear to be difficult to find.
    The one card that is readily available still is the ATI X1900, which looks great, but a little on the pricey side ($349).
    I did notice the NVidia 7300 GT, which is more moderately priced ($145), but it only mentions being an upgrade card for the Mac Pro. Will this also work with the PowerMac G5 (Late 2005) model? I would hate to buy this video card and then find out that it won't work.

    The only available upgrade card for the Late 2005 G5s is the X1900GT (aka G5 Edition). It's basically on par with the nVidia 7800GT that was available as a BTO option.
    You can get the 7800GT and QuadroFX 4500 as replacement parts, but they're exorbitantly priced.
    The Mac Pro cards won't work (even though they're also PCI-Express) due to the ROM on the card. It's only setup to work with the Mac Pro's EFI boot system and doesn't have the necessary code to work with the PowerMac's Open Firmware boot system.

  • What airport card does the Powermac G5 late 2005 take?

    what airport card does the Powermac G5 late 2005 take?

    Hi, looks like... A1126 Bluetooth...
    http://www.ebay.com/itm/Apple-Airport-Extreme-Bluetooth-Card-For-G4-G5-802-11-A1 126-COMBO-WIFI-CARD-USED-/330969525128?pt=US_Laptop_Network_Cards&hash=item4d0f5 22b88
    Compatibility:
    Dual Core 2.0GHz Powermac G5 (A1177-Late 2005-M9590LL/A-PCI Express)
    Dual Core 2.3GHz Powermac G5 (A1117-Late 2005-M9591LL/A-PCI Express)
    Quad Core 2.5GHz Powermac G5 (A1117-Late 2005-M9592LL/A-PCI Express)
    M9846LL/A 1.33GHz G4 12-inch iBook G4 (A1133)
    M9848LL/A 1.42GHz G4 14-inch iBook G4 (A1134)
    Another option you might consider is this if running 10.3, 10.4, or 10.5...
    http://x704.net/bbs/viewtopic.php?f=17&t=6670&p=81613&hilit=edimax#p81613

  • Late-2005 Mini; Continual Single Beep after Chime

    Late 2005 mini has a steady single beep after chime.
    It will not boot from CD and won't eject the CD.
    Open Firmware command "eject cd" gives an EJECT error after a long wait.
    (I took it apart to remove the CD).
    From what I've found so far, a single beep every and no chime indicates a memory error but I couldn't find any mention of continual beeping. The power LED remains does not blink. My Mini sounds like a heart monitor!
    Any help is greatly appreciated.

    Try other RAM...
    Can you count the beeps or flashes?
    1 beep = no RAM installed
    2 beeps = incompatible RAM types
    3 beeps = no good banks
    4 beeps = no good boot images in the boot ROM (and/or bad sys config block)
    5 beeps = processor is not usable
    In addition to the beeps, on some computers the power LED will flash a corresponding number of times plus one. The LED will repeat the sequence after approximately a 5-second pause. The tones are only played once.
    Note: In this case, a flash is considered to be 1/4 second or 250 ms or greater in length.

  • Which video card to get for my late 2005 Dual 2.0 G5

    Sorry if this has been answered in others posts. I have been a bit confused on what card I should be getting for my G5.
    I have a late 2005 model (last generation of the PPC) and it came with a 6600LE PCIe 128mb card.
    I would like to get a better video card (256 or 512) but I don't want to break the bank. I read about the ATI x1900 but I wasn't sure what the differences were between the two versions. There seems to be an x1900 MAC edition and an x1900 XT. Can someone let me know which card I need and whether or not there are other choices that might be cheaper.
    Thanks.

    I recently purchased an ATI Radeon 9600 Pro PC & Mac edition and installed it in a PowerMac G5 2.0 DP to power a 30" Apple Display ... installed easily and worked perfectly. It was $186.98 at Amazon, but is currently unavailable there; $204.99 at Small Dog. Here is the detailed description:
    +"Maximize your creative potential and gaming experiences with ATI's Radeon 9600 PRO PC & Mac Edition, the first hybrid 256 MB, ultra-high resolution graphics card for both Power Mac and PC users.The Radeon 9600 PRO PC & Mac Edition is a perfect upgrade for design professionals and gamers who demand exceptional graphics performance. The Radeon 9600 PRO PC & Mac Edition delivers stunning 3D capabilities at an incredible price for both Mac OS X and Windows XP users with AGP-based systems.The Radeon 9600 PRO PC & Mac Edition provides the most up-to-date display support, powering the market's latest, digital flat panel monitors and dual-link DVI ultra high-resolution flat panel monitors, including Apple's 30-inch Cinema HD Display (2560 X 1600 resolution). Equipped with ATI's breakthrough dual-link DVI output and support, the Radeon 9600 PRO PC & Mac Edition offers Power Mac and PC users the output capability and performance needed to maximize their design and gaming experiences."+

  • Power Mac G5 (late 2005) memory showing two different speeds

    Alright, here's the situation. I have a late 2005, Dual 2,0Ghz, water cooled, model, G5 Power Mac tower. These have 8 memory slots, (1 upper bank of 4 slots and one lower bank of 4 slots located directly above and below each other on the motherboard). The two inside slots (the two slots that are closest together - one from each bank) are labeled slot 1. Then the next two slots (moving outward from the middle) are slots 2, then slots 3, then slots 4. Anyway,according to the Apple specs, the memory should be set up in matching pairs of like modules: i.e. slots one = 2 X 1GB sticks of matching PC4200, slots 2 = 2 matching sticks of PC4200, etc., etc, up to a total of 8 GBs of compatible memory.
    I have 8 X 1GB sticks of "matching" Kingston PC4200 memory installed, and it even shows up on the "About This Mac" page as 8 GB. However, if you take this one step further and proceed to the "More Info" page, under the "Hardware" tab, the "memory" info it shows up as 4 sticks of DDR2-PC4200, and 4 sticks of DDR2-PC3200. Ironically, slots 0,1,2,3 indicate as PC-4200 (533Mhz), and slots 4,5,6, & 7 indicate as PC-3200 (400Mhz). Can anyone give me some insight as to why this would be happening? I've also re-arrainged the memory modules, but the memory speed discrepancy stays the same.
    Any help would be appreciated!

    It's likely no problem if everything is running fine, some SPIDIF chip anomoly I think.
    I've read several problems with Kingston RAM in Macs.
    Here's my Quad G5's RAM...
    DIMM0/J6700:
      Size:    1 GB
      Type:    DDR2 SDRAM
      Speed:    PC2-4200U-444
      Status:    OK
      Manufacturer:    Unknown
      Part Number:    Unknown
      Serial Number:    Unknown
    DIMM1/J6800:
      Size:    1 GB
      Type:    DDR2 SDRAM
      Speed:    PC2-4200U-444
      Status:    OK
      Manufacturer:    Unknown
      Part Number:    Unknown
      Serial Number:    Unknown
    DIMM2/J6900:
      Size:    2 GB
      Type:    DDR2 SDRAM
      Speed:    PC2-4200U-444
      Status:    OK
      Manufacturer:    Unknown
      Part Number:    Unknown
      Serial Number:    Unknown
    DIMM3/J7000:
      Size:    2 GB
      Type:    DDR2 SDRAM
      Speed:    PC2-4200U-444
      Status:    OK
      Manufacturer:    Unknown
      Part Number:    Unknown
      Serial Number:    Unknown
    DIMM4/J7100:
      Size:    2 GB
      Type:    DDR2 SDRAM
      Speed:    PC2-4200U-444
      Status:    OK
      Manufacturer:    Unknown
      Part Number:    Unknown
      Serial Number:    Unknown
    DIMM5/J7200:
      Size:    2 GB
      Type:    DDR2 SDRAM
      Speed:    PC2-4200U-444
      Status:    OK
      Manufacturer:    Unknown
      Part Number:    Unknown
      Serial Number:    Unknown
    DIMM6/J7300:
      Size:    Empty
      Type:    Empty
      Speed:    Empty
      Status:    Empty
      Manufacturer:    Empty
      Part Number:    Empty
      Serial Number:    Empty
    DIMM7/J7400:
      Size:    Empty
      Type:    Empty
      Speed:    Empty
      Status:    Empty
      Manufacturer:    Empty
      Part Number:    Empty
      Serial Number:    Empty

  • Best Practice for ASA Route Monitoring Options?

    We have one pair Cisco ASA 5505 located in different location and there are two point to point links between those two locations, one for primary link (static route w/ low metric) and the other for backup (static route w/ high metric). The tracked options is enabled for monitoring the state of the primary route. the detail parameters regarding options as below,
    Frequency: 30 seconds               Data Size: 28 bytes
    Threshold: 3000 milliseconds     Tos: 0
    Time out: 3000 milliseconds          Number of Packets: 8
    ------ show run------
    sla monitor 1
    type echo protocol ipIcmpEcho 10.200.200.2 interface Intersite_Traffic
    num-packets 8
    timeout 3000
    threshold 3000
    frequency 30
    sla monitor schedule 1 life forever start-time now
    ------ show run------
    I'm not sure if the setting is so sensitive that the secondary static route begins to work right away, even when some small link flappings occur.
    What is the best practice to set those parameters up in the production environment. How can we specify the reasonanble monitoring options to fit our needs.
    Thank you for any idea.

    Hello,
    Of course too sensitive might cause failover to happen when some packets get lost, but remember the whole purpose of this is to provide as less downtime to your network as possible,
    Now if you tune these parameters what happen is that failover will be triggered on a different time basis.
    This is taken from a cisco document ( If you tune the sla process as this states, 3 packets will be sent each 10 seconds, so 3 of them need to fail to SLA to happen) This CISCO configuration example looks good but there are network engineers that would rather to use a lower time-line than that.
    sla monitor 123
    type echo protocol ipIcmpEcho 10.0.0.1 interface outside
    num-packets 3
    frequency 10
    Regards,
    Remember to rate all of the helpful posts ( If you need assistance knowing how to rate a post just let me know )

  • Late 2005 iBook G4 with kernal panic

    Hi all,
    I cannot find any instructions for replacing or checking the Airport card in my late 2005 iBook G4. I'm trying to follow Dr. Smoke's instructions but can't find any DIY manual or pics of the Airport card in this notebook. I've found several that show an Airport extreme card where I've got memory. I've also found several memory replacement instructions. I don't have an original colored iBook so those instructions did me no good. I have no PC Card slots so those instructions did me no good. Any guidance would be appreciated.

    Hi
    Since the introduction of the iBook (Mid 05) the Airport/Bluetooth card has not been a user installable item. It is located under the top shield to the left of the processor heat sink. This means removing the casing of the iBook, so if you want to get it checked out, I would strongly advise that you take it to your local AASP who will, I'm sure check it out for you.
    If yours is a late '05 model, that kinda implies it's still in warranty, and if you attempt to take it apart yourself, you're going to void any warranty that you may have left.
    Paul
    PowerBook G4 17"   Mac OS X (10.4.3)  

  • Mac mini (late 2005) max size hdd?

    1) I have a mac mini (late 2005), G4 1.5 GHz, 1GB RAM 80 GB PATA HDD--What is the largest size (GB) drive I can use in it, that it will recognize?
    2) I would like to upgrade the OS to 10.5.8.  I already have a copy of this.  How well does 10.5.8. run on this type of machine?  Will I see much slow down?  Is it reliable, etc?  I would like to clone to an external drive, update the external drive to 10.5.8 and boot from the external before doing anything with the internal drive.  Is this possible?  We need to run iTunes 10 (for an iPhone 3GS) & Time Machine (for obvious reasons.)  Thank you, in advance

    For that generation, you will probably get the largest notebook disk at 320 GB at the most; note that, due to floods in Thailand, price of hard disk has almost doubled (at least in Europe, do not know whether in U.S. too). Note that changing the disk for that mini is a small adventure. Anyway, take a notebook disk not thicker than 9.5 mm
    1 GB RAM is maximum for that generation, so Tiger will run better than Leopard, but will run. With a new, larger disk, you may put both systems on two partitions, that is what I have with a 2004 PB, with a 120 GB internal disk.
    P.S. If info is correct, what you may get is WD at 160, 250 and 320 GB. If you have never changed a mini disk, I would recommend to ask for technical help, it is no kidding.

  • External monitor options For Macbook Pro(2011)

    Just curious as to what my monitor options are as a external monitor for the Macbook Pro.  I'm pretty much set on 27'' thunderbolt display but its a hefty price to swallow...
    Best buy has some good deals on there 27'' monitor but can i get the same resolution and clarity from other brands that will be eqivalent to Apple?
    I'd like to stay in the 27'' to 30'' size...
    thanks

    Any other options like Samsung, LG etc... that offer the same specs as the thunderbolt display? 
    Thanks

  • Adding Wireless to my Power Mac G5 (Late 2005) - Can anybody help?

    Hi all,
    I was wondering if somebody could help me add a wireless connection to my Power Mac.
    Firstly, is the MAXPower 802.11n/g/b Wireless PCI Adapter compatible with my Power Mac G5 (Late 2005)? The fact that my Mac has PCI Express slots makes me think it isn't compatible. There's also a USB version of the MAXPower Wireless Adapter, but I have a feeling this won't work as good as the PCI version.
    Secondly, can anybody recommend another way to get wireless connectivity working with my Mac?
    Regards,
    Daniel Cesana

    hey... i just got done going through this same issue...
    basically, if you are capable of spending about $235 + S/H you can get the card that was supposed to come with our G5's. otherwise... stay away from the usb emulators because they seem to have power issues and mde some of my other usb components drop out... all worked fine when i unplugged the usb adapter?!?!
    card
    that is part the combo card... there is another one that plugs in on top. our towers came with the internal antenna so the external one is not needed.
    i am still debating on getting it... not that i need to be wireless, but just to have it for future upgrades like the bluetooth accessories.
    cheers!
    --- oh, and i looked at the card you linked... it says mac compatible so can't see why it wouldn't work?!?!

  • Can a 2.5" SATA drive work in a late 2005 G5?

    I have a 160gig 2.5" HD I pulled from a 2006 MacBook CoreDuo. I was wondering if I could use this in a late 2005 G5 (running 10.5)? It seems like the interface is similar.... This will be a backup drive in the G5, not the one with the OS on it.

    Mike,
    I think you'd need an adapter, nit sure if this works in a G5 or not...
    http://eshop.macsales.com/item/Other%20World%20Computing/MM35T25/

  • Take Apart Guide for PM G5 2.0 Dual (Late 2005)

    Hello
    It has been determined that my PM G5 has a blown power supply. Unfortunately I do not qualify for the repair program as I purchased my PM G5 in late December '05. So, now I'm going to have to try & replace the power supply myself.
    I've been searching the web now for about 2 days & did manage to find some guides, the best of which is from '03, but I can't seem to find clear consice instructions for my particular G5. I'm stuck at the point where I need to remove the large plate (the on with G5 printed on it) that covers the CPU's. After that everything I've read/seen seems pretty straight forward.
    So, anyone know where I can get a take apart guide for the Power Mac G5 Dual (Late 2005).
    Thanks
    Tim
    Message was edited by: Tim Goodwin

    Steve, looks like you have exactly what I need. Is there any chance you could send me the information, or a link to where I could obtain it? I have two G5's that need repair and I am under a deadline. Thanks in advance. (Hope someone is still watching this thread!)

Maybe you are looking for

  • Transfer serial number to new macbook pro

    I purchased a new macbook pro but the serial number from photoshop cs6 doesn't work.  Any ideas?

  • Open Items not considered for Payment Lot

    Hello Experts. I have created some open items using FPE1. They are displayed as due in FPL9. But the same open items are not selected in FP06 for clearing. They are also not considered for clearing in a payment lot (FP05). Can some one tell me what c

  • Getting thumb drive files to iPad

    I need to get files from a thumb drive to my iPad,would like some help for a NOVICE like me to get this done Thanks

  • Audio from a recorded video

    I record a video with my playbook and the only audio is pulsating static. My son's playbook is doing the same thing. Restarting it doesn't help. How do we fix this?

  • No video on Safari today???

    I can't play video clips on websites today including YouTube. I have gone to news websites, same problem. I can play quicktime videos on my own website. I have no idea what's going on and this has never happened before. Please help