Late 2008 Mac Pro won't start -- help! Hangs up on Airport: RSN handshake complete on en2.

Hello Mac Pro user,
I have a late 2008 Mac Pro. It will not start anymore. The computer chimes and then goes to the Apple icon screen with spinning cursor, but then it freezes and goes no further.
So I did a single user start up [shift command S],then I let the info. load on the black screen, and found that the system hangs up at this line: Airport: RSN handshake complete on en2. Does anyone know what to do?
How do I get it to boot up again?
Thanks,
Yvette

pull the drives you have. ]
F'ind a way to do a clean system install on another drive.
Clone your user data to another drive also.
ie, create a new solid foundation.
but until your repair your drives, by booting off another device, don't use them. Pull them for now.

Similar Messages

My Late 2008 Mac Pro won't update to Yosemite, even though it has the Mac OS X 10.6.8.

I'm trying to update my Late 2008 Mac Pro to Yosemite. I've checked for updates, and it says I don't need any. I'm running OS X 10.6.8. Any suggestions?

Use this display to get a summary of your Hardware, but do not post your serial number here.
 menu > About This Mac > ( More Info ) > Report > Hardware

Early 2008 Mac Pro won't start.

Early 2008 Mac Pro. Spelt some liquid on top that ran down front of computer. Tilted it back to wipe underneath and it shut down. Now it will not start. Processor fan runs full speed and that's it.

Hello,
My Friend spilt a drink on their laptop and the device started to smoke.
My suggestion is to get a hair tight container fill it with rice and put your computer in it, and leave it for 1-2 days.
The rice should absorb most of the water, and hopefully it should work again.
If it does turn on make sure you check the lights under the keys!
If they still don't work my suggestions are to take it in to an Apple store.
Good Luck!
I wish the best for your fellow Mac!

My Mac Pro won't start

My mac pro won't start have a light on and sometimes have a green light on caps key.

Hello there hoc5050,
It sounds like your computer is not turning on consistently. I would recommend the troubleshooting in this article to help you determine what might be causing the issue, named:
Troubleshooting: My computer won't turn on
Thank you for using Apple Support Communities.
Cheers,
Sterling

HT201343 I have a late 2008 Mac Pro Quad Core 2x2.8 Intel Xeon with Lion 10.7.5- do I need Maverick and will this hardware support the Airplay Mirroring?

I have a late 2008 Mac Pro Quad Core 2x2.8 Intel Xeon with Lion 10.7.5… do I need Maverick and will this hardware support the Airplay Mirroring?

It doesn't mention anything about a Mac Pro. So no.
http://support.apple.com/kb/HT5404
If your computer did support it, you would still need 10.8 or 10.9 for Airplay to work.

My Mac Pro won't start. It turns on and then a blank, white screen appears. What do I do?, My Mac Book Pro won't start. It turns on and then a blank, white screen appears. What do I do?

Mac Pro won't start. It turns on and than a blank, white screen appears. What do I do?

This could be a software/state problem or a hardware problem. Here are steps to resolve the former.
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/TS2570

Multiple graphics cards on 2008 mac pro, won't work

Hi, I have a 2008 Mac Pro 2 x 2.8 GHz Quad Core Intel Xeon with 14 GB 800 MHz DDR2 FB-DIMM. I have used a ATI Radeon HD 2600 Graphics card connected to 2 x BenQ E2400HD screens. Now, I want 4 screens so I bought a NVidia Geforce 8800 GT graphics card as I found these to be compatible with my setup on Ebay (only place I could find it). Got it in a brand new condition in a Apple graphics card box so should be all good. Put it in PCI-E slot 2. Now when I started my Mac after installing I could hear a loud fan noise (fan going on max speed) and tracked it to the new graphics card. When I open the system profiler it shows up as a display. The screen connected to the graphics card with a DVDI-cable does not show an image and the screen indicates that it does not have an input. Any ideas what's wrong here? Is my graphics card broken?

More than likely you got wrong verion.
1,1 and 2,1 Mac Pros are EFI32, and for Nvidia cards need proper version.
If your machine is a 3,1 or later you need an EFI64 version.
Contact the seller and clarify.
If you install "ATY_Init" and are running 10.6.8 you will find the card will work once machine boots all the way.
You could then flash the card into proper version if you were especially clever with things like that.
But your seller should help you.
You need to know "Model Identifier"
http://macvidcards.com/macpro/which-mac-pro-do-you-own/

Early 2008 Mac Pro Won't Boot

I have an early 2008 mac pro that will not boot. Power turns on, power LED turns solid, but no display ever comes up and it never chimes. I have tried swapping out RAM, hard drives, disconnecting all peripherals... any other suggestions? Dead logic board?
... and yes, I was too dumb to buy the AppleCare. Stupidest move I have ever made...

Hi I think I have a similar problem.
My Mac Pro 8 core doesn't start up. When I turn it on here's what it does: the boot up sound > the grey/white screen with the apple logo and the little turning gear thing > then it freezes.
Sometimes after that the screen either goes blue with nothing but a mouse pointer that's moveable. but no login window. I can access the hardrive by network and weird enough it's booting on safe mode. I tried setting the SMC firmware but it didn't work. I took it to an apple store and when they plugged it into their displays it worked. When I brought it back, I plugged it into my Cinema Display 30" and the same problem started again. I reset the SMC firmware again and tried different displays I have at home but had the same problem. I plugged the 30" display into a Macbook Pro and it worked fine so I know that the display is not the problem. I've heard the the Nvidia 7300GT has caused problems but why would it work in the apple store? Any help out there?

Early 2008 mac pro won't boot from hdd when ssd is installed

I have Mountain Lion 10.8.3 installed on my 1TB HDD in my early 2008 mac pro. That is the only OS install on my mac. I have an OWC SSD formatted but left as an empty drive that I am trying to use but when it's installed my mac hangs on the blank gray screen.
My mac cold boots fine and runs fine when the SSD is *not* installed. When I shut down and put the SSD into a drive bay the mac does seem to boot ok the first time, but when the computer is off for a while it will not boot. It just hangs on the blank gray screen (no apple logo). As soon as I pull out the SSD, the computer boots fine and runs fine again. I am not trying to boot off the SSD, I am booting off the HDD. The correct drive (1tb hdd) is selected in startup disk.
OWC has been helping me and I have tested 3 SSD's. So it does not appear to be a problem with their drive.
The mac will boot into safe mode with the SSD installed. It will boot if I choose the boot drive with the option key at startup.
Mountain Lion was clean installed.
Could it be some sort of library pref or cache issue?
Any recommendations on what to try?

A HT does not find a lot of errors.
It doesn't look for bad sectors or directory or file problems.
Clone your SSD now that you have a clean OS and has the Apple updates on it. Before you make changes.
Install TRIM Enabler 2.2+ on it and any boot volume, to enable TRIM and so that Disk Utility's Repair Disk will trim cells. Mountain Lion Recovery won't which is a shame, so...
Clone and keep bootable backup clone of your system to use for maintenance.
A really bad directory on a system drive will cause interference from booting.
SSDs really need extra care, and even with TRIM, to be repaired from time to time and couple times a year, to do an erase and restore from a current image.
Of course Mac OS system even iwth apps is small and doesn't need to have any data or media and fits on 120GB usually just fine and still have a good enough amount free so TRIM and Garbage Collection can work properly and not get low on free pages. But 20GB free should be the minimum free, and better to have more, at least whatever total amount is written out in a month.

Radeon 5770 in 2008 Mac Pro, won't boot - hangs at Apple logo screen??

Okay, so I had the Radeon 2600 XT and it kept giving me issues with pink & white checkerboards and freezing, then eventually wouldn't let me boot past the white/grey apple logo loading screen. Now, today I installed Apple Radeon 5770, just installed, got the MiniDisplay to DVI-D adapter and everything, but it STILL won't let me get past the white/grey apple screen! I can't seem to get the DVD drive to open either. Both of my hard drives have been working fine and I've even swapped slots and i still can't get past the white screen! What gives? I just dropped over $300 for this, so you can imagine my dismay and frustration. Can someone please help me with some ideas? Would be GREATLY appreciated.
It's a 2008 Mac Pro dual 2.8Ghz (3,1), running 10.5.8
M

Yeah, ok thanks for the response about the screen! So, I don't have 10.6.5. I'm running 10.5.8, which the Radeon 5770 says it needs 10.6.5, but -finally- I got my computer to boot up with the 5770 in it, on 10.5. Al I did was hold OPTION+ Power button and it took me to a blue screen, then to my 500 GB new HD. I then switched over to my other username on Macintosh HD (drive that came with the MacPro) and OSX loads fine! I can tell that it still needs to be on 10.6.5, so I can download the drivers because the text is ever so slightly fuzzy, and the color isn't tuned well (too much contrast) and images take a little longer to load/ are a bit laggy. I'm just glad it's up and running! No more pink transparent checkerboards, and loud *** fan sounds! I am wondering though, what was causing this hold up? Is it only booting up because I have the 10.5.2 install disc in the SuperDrive? I almost don't want to take it out and try without it, after the trouble i've had, just in case lol. I'd like to have an idea as to why, because I don't want to mask a problem, and have it eventually turn into a catastrophe.

Early 2008 Mac Pro won't boot after installing 2nd DVD drive

All,
I purchased a Pioneer DVR-117D from Mac Sales and after installing it in my new refurbished 2008 Mac Pro it won't boot. My MP will boot if I remove the drive. According to the Mac Sales website this drive should work fine in my MP. Any ideas as to why this is happening. I literally just got my MP today and installed the drive. Is it the drive or the Mac Pro. Thank you all.

The drive was set to master, I switched it to CS before I left for work but haven't tried reinstalling it. I will try when I get back and let you know if it worked. Thank you again.

Mac Pro won't start; please help!!

Had Mac Pro for 6 months. All was going well until today. Then I noticed my Mail application was not sounding a chime when mail came in. I repaired permissions and re-started my computer.
Only it did not re-start. I got no start-up chime and after the grey screen appeard, after about 15 seconds a dark blanket transition goes down the screen and a message comes up in several laungauges, English being:
"You must re-start your computer. Either hold down the power button for 8 seconds or press the restart button".
I held the power button in for 8 seconds, then turned it back on again, same thing...
I reset the SMC/Pram thing (whatever it is called) by doing it both ways i.e. unplugging every cable, then plugging in just power/keyboard/mouse, the other way was pressing the switch inside the machine; nothing.
My machine won't start up.
Any ideas?

What you're seeing is called a kernel panic. You can read more about what causes these and steps to take on the following web pages:
What's a "kernel panic"? (Mac OS X)
Resolving Kernel Panics
FJ: Kernel Panics ? Don't panic too !
Hope this helps.

HELP Please, Mac Pro won't start up

Hi can anyone please help me??? Our power went out while my husband was out of town and HIS Mac Pro is just sitting there with the grey screen with the apple on it and the progress wheel spinning, it has been this way for over 2 days now and I am scared to death to shut it off or try to restart it!
Any suggestions??

1. Buy him an APC UPS 1500VA so power outage, brown outs etc are a thing of the past.
2. Kill it for now.
3. Make sure there are bootable backup clones - SuperDuper or Carbon Copy or another clone program.
4. Install OS X to a small 20GB partition to repair the main system.
5. Invest in 3rd party disk repair maintenance if you haven't already.
Micromat TechTool Pro 5.x
Alsoft Disk Warrior (#1 choice)
Prosoft Drive Genius 3
http://www.macintouch.com/readerreports/harddrives/topic4557.html#d10aug2010
You/he are facing a corrupt disk directory that can't be fixed automatically and don't use the drive as is, work from another hard drive, which is why you want to install and have bootable backups, and maybe a drive volume to recover and/or backup to.
This Cyberpower is what I use, replaced the APC units.
http://www.amazon.com/Cyberpower-CP1500AVRLCD-UPS-Display-8-Outlet/dp/B000FBK3QK /
APC 1500VA
http://www.amazon.com/APC-BACK-UPS-BR1500LCD-1500VA-System/dp/B000NDA5E0/

2008 Mac pro won't turn on at all

I have a 2008 MacBook pro and I turned it off and then later I turned it back on and it sounds like it is loading but the screen is still black and there is no start up noise

See the won't power on section here, but it's not looking very good
 Cheat sheet to help diagnose and fix your Mac
Perhaps it's time for this
 Data recovery efforts explained
if you don't have a recent backup, but the hard drive sounds like it's still working, it can be removed and used to transfer files to a new Mac with IDE/SATA to USB adpater cable

Mac Pro won't start up. What's the best way to check the power supply?

Hello. I'm having a severe problem with my 2007 Mac Pro. The symptoms are very easy to describe. The computer apparently shut itself off overnight, and when I press the power button to turn it on, absolutely nothing happens. No lights, no chime, no signs of any power whatsoever in the computer. I have never had major problems with the computer before. (Although I had recently noticed some minor skipping problems with streaming videos and Firefox had started hanging occasionally.)
So far, I have checked the power cable and the power outlet. I have also reset the SMC (holding in the Power button for 5 seconds with the unit unplugged). I am unable to see any light in the diagnostic LEDs (including LED 1) when I press the DIAG_LED button on the logic board.
While I welcome other suggestions, all I can figure is that this is either a power supply problem or a major logic board failure, but I don't know which. I have a multimeter and would like to test very directly if the power supply is the problem, because they are very expensive and obviously I do not want to order a replacement supply if it would not fix the computer. Does anyone know what the best way to test the supply directly is? What pins on what cable should I test, and what voltage should I look for?
Also: No the computer is not under any warranty. If at all possible, I would like to fix this myself. Thanks for any help you can give.

Well, I may have found the answer to my question as to why replacing the fuse dows not seem to be encouraged. I cut out the failed fuse (fast fuse, ceramic, 16 Amp 250V), and replaced it with another that was as close to it in spec as I could find (15 A instead of 16). Then I put the supply back in the case.
When I tried to plug it in, I got an immediate spark, followed by an acrid smell from the power supply. Later inspection revealed that the new fuse blew, as did another component nearby (not sure what it was) where I could see blackening and the smell was concentrated. At this point, I would consider myself lucky if the power supply didn't take anything else on the computer out with it.
Lesson learned; will try a new power supply and go from there.

Late 2008 Mac Pro won't start -- help! Hangs up on Airport: RSN handshake complete on en2.

Similar Messages

Maybe you are looking for