Late 2008 MBP not waking up since last update.
Ever since the last update (10.6.4) my late 2008 MBP will not wake up if it goes to sleep for long periods.
It never used to do this, and I'm getting really annoyed with having to do a hard shutdown every time I want to use the **** thing.
There is nothing unusual about my MBP, no aftermarket peripherals or anything like that.
Try booting from your OS installer disk and run Repair Disk from Disk Utility. I would also try booting in safe mode (hold down the shift key until you see the cog - takes a while to boot) and then run Repair Permissions from Disk Utility. If there is something in the Trash empty it. Then reboot.
Similar Messages
-
Why would a late 2008 MBP not boot with 10.8?
I have a late 2008 MBP I update from 10.7.4 to 10.7.5 and it refused to boot, although it would safe boot. So I tried a clean 10.7.5 install still would not boot. Again happy to boot into safe mode.
Next tried a clean 10.8 install again it will only boot into safe mode.
Booting into verbose mode it fails at the bluetooth, so i tried disabling the bluetooth extensions, still no joy.
Any ideas?Hey Sig,
I ran all the usally disk repairs and permissions repairs. It still will not boot in normal mode in any OSX above 10.7.4. I assume they have change a driver or extention that is causing a conflict. Its very fustrating as others seem to be running ML on the seem hardware with no problem.
cheers
Mike -
Pages not loading properly since last update
Since the last update, Firefox just isn't working any more. It takes multiple clicks to load or reload pages, and often the page loads without any graphics. I may have to click the Reload button a dozen times to get a page to load properly (or to load at all). I tend to keep a lot of windows open, and I'm sure that's part of the problem, but the way that previous versions handled this was better. It isn't just some pages that aren't loading properly, it is a majority of them. This program has become mostly dysfunctional.
This seems to be a problem that has started since Firefox 7. See the instructions in this article for a possible solution: [[Firefox never finishes loading certain websites#w_lower-the-max-number-of-http-connections|Firefox never finishes loading certain websites]]
-
Blogger sites made with Artisteer not loading properly since last update
Blogger sites made with Aristeer no longer load properly, the template is wrong, things do not fit in the template properly, boxes are missing. Sites made with blogger software are fine. Everything is fine on IE and Chrome.
Reload the webpage while bypassing the cache using '''one''' of the following steps:
*Hold down the ''Shift'' key and click the ''Reload'' button with a left click.
OR
*Press ''Ctrl'' + ''F5'' or ''Ctrl'' + ''Shift'' + ''R'' (Windows and Linux)
*Press ''Command'' + ''Shift'' + ''R'' (Mac)
Let us know if this solves the issues you are having. -
The blue circles next to the mivies do not apear anymore since last update , can i put them back to see wich movies un-watched.
That happened because you synce'd your phone to a new computer, the phone can only be synce'd with one library. You can get all your songs back if they were puchased in itunes. Go to purchased in itunes store and download is at the bottom of the page.
-
I downloaded the free Mavericks upgrade to my late 2008 MBP on Friday. I made sure to plug in my external hard drive so that Time Machine could back up beforehand. (I should say I'm not clear about the different kinds of backups that Time Machine does - I just plug it in and let it go.).
So have tried several times over the weekend to install, it takes 46 minutes each time - only to tell me it can't do it. There was an error message of needing to contact the software provider (or something similar). After searching the internet (on my husband's computer - since my MBP is rendered useless right now) I decided maybe I should wait on Mavericks and just do a system restore. However, when I plugged in the Hard Drive and proceed to System Restore, the latest date available is one from September of 2012 (14 months ago)... I've wondered if the date might be wrong? But I'm afraid to choose it because I'm not sure what I would lose. It might take me back to Snow Leopard rather than Lion... (however, the version on Restore was 10.8.1 which is Mtn Lion, right? Even tho it was last year...)
Some sources online say that I should go into applications and delete the install -- but I can't get to anything on my computer.
I tried to do a reboot in safe mode - but not sure if it worked...
I did look on the installer log error and the latest error is:
Local Host Report crash [378]
Can anyone help me? (Using simpleton, non-techie language?
ThanksI downloaded the free Mavericks upgrade to my late 2008 MBP on Friday. I made sure to plug in my external hard drive so that Time Machine could back up beforehand. (I should say I'm not clear about the different kinds of backups that Time Machine does - I just plug it in and let it go.).
So have tried several times over the weekend to install, it takes 46 minutes each time - only to tell me it can't do it. There was an error message of needing to contact the software provider (or something similar). After searching the internet (on my husband's computer - since my MBP is rendered useless right now) I decided maybe I should wait on Mavericks and just do a system restore. However, when I plugged in the Hard Drive and proceed to System Restore, the latest date available is one from September of 2012 (14 months ago)... I've wondered if the date might be wrong? But I'm afraid to choose it because I'm not sure what I would lose. It might take me back to Snow Leopard rather than Lion... (however, the version on Restore was 10.8.1 which is Mtn Lion, right? Even tho it was last year...)
Some sources online say that I should go into applications and delete the install -- but I can't get to anything on my computer.
I tried to do a reboot in safe mode - but not sure if it worked...
I did look on the installer log error and the latest error is:
Local Host Report crash [378]
Can anyone help me? (Using simpleton, non-techie language?
Thanks -
Original capacity of 15 inch Late 2008 MBP
I'm just a little confused as to what the starting capacity of the late 2008 MBP battery is. The battery itself reads that it is at 50 Wh. But, according to Coconut Battery and iStat Pro, the original capacity is 4600 mAh.
I'm debating whether to buy a new battery since my battery has 463 cycles on it, and it's current capacity is at about 4023 mAh. If the battery started with 50 Wh, then I'm right at about 80%, and my battery should be replaced soon, but if it started at 4600, then I'm at about 87%, and it's a-okay.
The battery definitely doesn't last as long as when it was new, but I'm just trying to figure out if buying a new battery will be worth it to me at this point, or if I should give it another 100 cycles, then buy a new one.
Thanks guys!
P.S. My battery never charges all-the-way to the full holding capacity. The computer always reports that it's charged at 3900 mAh, give or take, which is about 98% of the reported capacity of 4023.Your model's battery had a maximum capacity of roughly 4.5 hours under the minimum load. Watt-hours is not a capacity measure but a power delivery measure. The capacity measure is 4600 mAh. That is what it was when new. The battery has an expected life of 500 cycles so yours is near the time for replacement. At the point where it is now the battery should power the computer for a maximum of about 4 hours.
-
SSD Upgrade to Late 2008 MBP, Plus Windows 8 Install
Hi guys,
I have a 15", late 2008 MBP that was a beast in it's time, but has started to show it's age, especially due to my aging hard drive. I've read great things about performance improvement through installing an SSD, and so I want to perform this upgrade. Also, while I do have my computer backed up through Time Machine, I'd rather just be proactive on replacing my hard drive before it fails on me (which will definitely happen at some point). Here's some more detailed specs for my computer:
CPU: 2.66 GHz Intel Core 2 Duo
RAM: 4 GB of 1067 MHz DDR 3
GPU: NVIDIA GeForce 9600M GT 512 MB
Note about the GPU: This comp has the dual graphics chips, but I've been always using the "high-performance" one, which is what is listed above (the other one is a GeForce 9400M).
OS: Most current version of Mavericks (OSX 10.9.2)
In looking up SSD's, I've found that people that have had laptops with similar specs to mine have had success with the Crucial M500 SSDs.
After I get my drive all figured out, I want to use Boot Camp to install Windows 8 on the SSD. Currently, I do not have any Windows installations on my computer. My computer is not supported for Windows 8 installation through Boot Camp, despite the fact that hardware-wise, it is compatable with Windows 8. However, I have found discussions that are pretty standard on how to get Windows 8 installed on my computer.
-So, my first question is: Was my research good for this given SSD for my computer? It seems like Samsung makes the best SSDs, but I haven't found any evidence that it would be really compatable with my computer.
-My second question: Given that I will have just installed an SSD, will Windows 8 installation be doable? This is probably the most important question for me, because if it's not possible, then I'd rather just buy Windows 7 right off the bat and install that in boot camp instead.
-My third question: If I can get Windows up and running, how does my computer's double graphics chip configuration work in Windows? I'd want to make sure that Windows is using the more powerful of the chips and not the less powerful one.
-My fourth question: My computer has gone from Leopard to Snow Leopard to Mavericks, and I never performed a "clean install" for any of these OS upgrades. If I clone my HD to the SSD, would it be beneficial for me to run a Mavericks clean install, and then pull all my necessary data off my backup drive?
Sorry for the long-winded post, and I know much of it is demonstrated elsewhere. I have found many discussions involving SSD upgrades, and getting Windows 8 on a late 2008 MBP, but I haven't found anything that has shown both being done. Both seem easy to do, but I just don't know if doing both in tandem is going to cause a bunch of problems. Has anyone out there done this, and can anyone offer me any advice on how to make this process any smoother? I really like doing this upgrade now, because if I run into Windows issues, or other issues on the SSD, I could still just boot from my old hard drive and use my computer. Thanks everyone!beestmode,
I have a Mid 2010 MacBook Pro, and I put a Samsung 840 PRO SSD into mine. Where did you find evidence that this model SSD would not work in your MacBook Pro? (The SSD which you’ve installed has a good reputation, so you should have no reason to regret your choice.)
Windows 8 via Boot Camp will not be possible with your model MacBook Pro. In Boot Camp, you could install up to Windows 7, either 32-bit or 64-bit. A virtualizer such as Parallels Desktop or VirtualBox could allow you to install Windows 8, but virtualizers have their own sets of positives and negatives.
Since I have a 13-inch model with only one GPU, I don’t know how your dual GPUs would be handled on the Windows side.
When I’d installed my SSD, I did a clean installation of Mavericks onto it, keeping Snow Leopard on my old internal disk, and putting it into an external enclosure. -
Moving from Late 2008 MB to Late 2008 MBP... best way to restore via TM?
Hello,
My Late 2008 Macbook was involved in an accident (RIP). I had hopes the HDD would still work okay, but it just beeps at me and is unable to load anything.
So, I've already ordered my replacement Mac. I ended up ordering the 2.53 Late 2008 MBP refurbed from Apple.
I need to eventually restore my data on here. Fortunately I had Time Machine setup with my backup applications and files. What is the best way to restore my applications/settings on the New Macbook? Migration Assistant? Archive and Install?
The previous Macbook had a problem when opening Safari, sometimes it would take a few seconds longer than normal to load with the beachball. I'm trying to avoid migrating the issues I had previously onto the new system, so ideally I'd have a fresh OS X install, but with all of my applications and settings intact. Is there an ideal way to do this?
Thanks,
JonathanI understand completely about wanting to have a fresh OS to start out from to minimize any performance issues and whatnot.
As far as I can imagine, the only way to do this with all your settings and files intact is to do the Time Machine restore, then Archive and Install after (aka Option 2). However, I would evaluate the performance of the system before doing the Archive and Install. I have a feeling that you'll think its more than satisfactory and not feel the need to do the A&I at all.
As to the Safari issue, it was probably a .plist file corruption or something like that which is very simple to fix. If the new machine presents the same issue with Safari as the old one, I'm pretty confident that we can fix that up quite easily.
--Travis -
Flickering Horizontal Bar on Late 2008 MBP
I have late 2008 mbp (5,1)....NVIDIA 9400M and 9600M GT/Intel Core 2 Duo 2.93 Ghz, 4GB RAM
Having issues where on random occasions (especially if computer screen is open and laptop is just placed on a desk-so movement?), a horizontal bar on the bottom of the screen about 4.5 cm in height begins to rapidly flicker. It started happening about a week ago, and twice it has caused the computer to freeze (reboot necessary).
Also, although temp sensors seem to be giving normal values, I have been noticing that the entire surface of the laptop is getty very hot (hotter than I have normally experienced from the laptop under a normal load).
Graphics card issue, screen connection issue? Any thoughts of what it is?Display problems do not improve over time. Make an appointment with Genius bar at the Apple store and bring it in. If you have Applecare and is still within the 3 year warranty period, your saved, other wise be prepared to pay. I have experienced display issues twice.
Ciao -
Hello -
I just installed a new M500 Crucial ssd in my late 2008 mbp - everything was working fine on old hard drive (running snow leopard) but was getting slow and wanted to upgrade - i lost my snow leopard disk when moving from hawaii so i found an iso online - using a flash drive i partitioned the disk and made the bootable image on flash drive - formatted as extended/journaled - switched out the hard drives - plugged in the flash drive - started the comp - held option - install begins to boot - choose language - all is fine - choose english - next step window pops up saying 'cannot install os on this computer' - click on utility but all options are greyed out - disk util is greyed out - only options it gives is to start from backup or restart - real confused here - all help appreciated - thanks in advance and happy new year!Snow Leopard comes in discs only. The USB drive may be a counterfeit and/or corrupt. There are two options for you:
Get replacement original OSX installation disks from Apple customer service. Have your MBP serial number ready and there is a charge.
Or two, purchase a Snow Leopard disk from the Apple online store:
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Ciao. -
My Macbook aliminium unibody from late 2008 will not boot. I reach the grey screen with the apple icon and the spinning grey gear. I used disk utility to boot it but it said integrity test failed. I don't know what to do can anyone please help?
Sounds like you may have a harddrive issue. You are probably going to need to get that changed out and then install the OS X again to get it going.
-
IMAC mirroring is not working with my IMAC and Apple TV since last update
Hi friends,
since last update I am facing problems with my IMAC and airplay via apple tv to my HD TV screen. It is not working. Only audio but not video. I believe it has something to do with IMAC mirroring, which is not possible to select only expanded desktop. Airply on my TV is working with my IPAD, so it should be a problem with my IMAC only.
Did someone of You make the same experience or know what to do?
Thanx in advanceHello, H1Daisensei.
Thank you for visiting Apple Support Communities.
Here is an article that you may find helpful when experiencing this issue.
About AirPlay Mirroring in OS X
http://support.apple.com/kb/ht5404
Cheers,
Jason H. -
How to go from 10.8.5 to 10.8.4 on late 2008 mbp?
On a late 2008 mbp went from a perfectly working 10.6.8 to the downloaded 10.8.5 from App store.
My airport is constantly unusable, I keep deleting and remaking the wifi account in Networks, it crashes at least 2 or 3 times in the beginning of the day until it finally stays working, usually while using Safari or Firefox(latest 26). Updated the system thru all available posted updates and still misbehaves. Others seem to suggest a software glitch as the culprit and have suggested going to 10.8.4.
I never had 10.8.4, so how can one get it and install it. Will it require a clean install? I have fixed permissions, checked the drive with DriveGenius but nothing seems to do the trick.
I may have to return to 10.6.x but to run Lightroom 5 I need 10.8.x. Has anyone solved this quandry out there?
Thanks, I'm at the end of this rope.
LWill it require a clean install?
The only installer available from the Mac App Store is the 10.8.5. You can't go from 10.8.5 to 10.8.4 and you can't do a clean install with anything other than 10.8.5. You should try a new clean install of 10.8.5 to see if you had a bad upgrade originally. -
I have not been able to open and PDF since last update
I have not been able to open any PDF since last update. It starts to open goes to blank text area. I am unable to use any ofthe buttons eg. help or fileopen... it then closes automaticly. I have uninstalled and reinstalled with the same issues. I have also installed just XL not 11.0.03 version to try something different.P
Please helpIf you are in Windows (which we don't know), you can try using Windows Explorer to navigate to C:\Program Files (x86)\Adobe\Reader 11.0\Reader, then double-click on Eula.exe and accept the license agreement
Maybe you are looking for
-
Open form - close form problem
Hi. Using JDeveloper 10.1.3.3., ADF BC. Simple, yet not so simple problem: I have two forms, Main and Detail (JFrame). Main form has menu item which I use to open Detail form: try { FormDetail frmDetail = new FormDetail(); frmDetail.setBindingContext
-
How do I install on this MacBook ver. ?
I have a white MacBook, version unknown. Disk repair complete, Contents erased. It says Tiger install not compatible. It says 10.3 incompatible. What to do? Target mode from MacPro. If I do not use target mode, the macBook only gives me ? screen, w
-
Hard Drive Failed - How to get Blog/iWeb back to new hard drive?
Our hard drive failed and none of the data is recoverable. I have a new hard drive and want to do a new post on our blog, but am worried it will delete our old blog (hence all our pix etc too) if I publish from this empty new blog. How do I get the o
-
How to install plugin in the eclipse?
Hi all, I made a download the KXML plugin (http://prdownloads.sourceforge.net/kxml/kxml2-min-2.2.2.jar?download), but I can't to install and use this plugin for to read XML files. For example: I need to import org.kxml2.io.KXmlParser. I put the downl
-
Hi, Can anybody help me with some BW documents on FI AP, FI AR and PCA other than help links. Thanks.