Late 2009 mb white uses pc8500 dd3 pc 1066mhz ram

late 2009 mb white uses pc8500 dd3 pc 1066mhz ram..
can i install a ddr3 pc10600 1333mhz ram into it?
will the system automatic align to the slower speed?

"Technically", it should. However, Macs are very picky when it comes to RAM. It's not uncommon even for correctly spec'd RAM to have compatibility problems. Your best option is to purchase RAM which has been specifically identified as working with a Mac. You can use the memory configuration tools on Crucial's and Kingston's websites to find compatible modules and then either purchase them there or from any retailer that might carry the same modules. If you just happen to have some higher speed modules available, there's no harm in trying them out, but I wouldn't go out and purchase them.

Similar Messages

Is it possible to install a 4 GB of RAM memory to a late 2009 macbook white?, Is it possible to install a 4 GB of RAM memory to a late 2009 macbook white?, Is it possible to install a 4 GB of RAM memory to a late 2009 macbook white?

Is it possible to install a 4 GB of RAM memory to a late 2009 macbook white?

Maximum Memory 8.0 GB (Actual) 4.0 GB (Apple)
Memory Slots 2 - 204-pin PC3-8500 (1066MHz) DDR3 SO-DIMM

HT5634 27 in late 2009 iMac and using bootcamp 4 and windows 8 64 bit I am getting a error message upon startup

I have a 27 in late 2009 iMac and using bootcamp 4 and windows 8 64 bit I am getting a error message upon startup. Any way to fix it?

Windows 8 is not supported on your computer.
http://support.apple.com/kb/HT5634

Mac Mini Late 2009 support white Apple Remote?

Just got a refurb 2.26GHz Intel Core 2 Duo with 2GB 1067 MHz DDR3 running 10.6.3 to replace my G4 Mini (using Mira remote)as a Media Centre. I've installed EyeTV and the EyeTV remote works fine, but the white Apple Remote I have does not. Remotes are not disabled in Preferences - remote just doesn't register at all. This remote though does work with my MacBook as well as the G4, so no problem with that.
Do these new Minis support the old remotes? I've also just installed Boxee; any remote issues with this?

The white apple remote should work fine with any Intel Mini -- although I can imagine a scenario in which third-party products/software might interfere.
(BTW where are you finding a Preference setting for disabling an Apple remote?)

How big (GB) of a hard drive can my late 2009 MacBook handle?

I'm looking to upgrade my internal hard drive in my late 2009 MacBook and I want to know what is the highest GB that can be supported?

I have a late 2009 MacBook White with 4GB Ram and running on Lion.
I just installed a 750 GB Seagate Momentus XT with 8 GB SSD hybrid drive. It was no trouble and works fast and perfect!
Just make a new partition on the new disk, clone your current HD to the new disk (I used Carbon Copy Clone) and then replace. Simple as that!
It just makes a bit more noise and battery life is shortened because of the specs of the Seagate HD.
I hope this was helpfull.

HT3918 Mixing RAM modules in a late 2009 iMac

I have a late 2009 27" iMac that came with only 2 Gig of RAM. I recently ordered 16 Gig of RAM (4 modules), but they only shipped me 8 Gig (2 modules). I installed the 8 Gig (still leaving me with 2 empty slots), can I also reinstall the two 1 Gig modules that I removed for a total of 10 Gig?
Also, if I order an additional 8 Gig from another company will it cause problems to mix products from different companies?

Welcome to the Apple Support Communities
The Late 2009 iMac came with 4 GB on all the models, so maybe you have an Early 2009 iMac.
Apart from that, if you have a Late 2009, you can use 16 GB of memory, so you can install two 4 GB modules and two 1 GB modules, for a total amount of 10 GB, without any problem. If you have an Early 2009 iMac, 8 GB of memory are the maximum.
To buy memory, I only recommend you OWC and Crucial, that provides compatible memory with Macs. Other brands may work, but with OWC and Crucial you can be sure that memory will work with your computer > http://www.macsales.com

Which solid state drives are compatible with iMac 7 27 inch late 2009?

I am interested in installing an SSD (120 to 250gb) for the start up drive and run the system and apps that are disk drive intensive like databases. My goal is to speed up my iMac 7, and of course, minimum investment necessary.
I searched online and find lots of material at OWC, Crucial and iFix it but have found conflicting opinions and even success in the upgrade. So my questions are:
1) Can an SSD be installed in my iMac? iMac 7 late 2009, 2.8Ghz 27", model 11,1, 16GB RAM
    a) as an internal hard drive in addition to the factory installed?
    b) as an internal hard drive in replacement of the factory installed?
    c) as an external USB drive?
2) What type of SSDs are compatible?
3) Assuming that 1 and 2 are positive, what are the most critical things that I should keep in mind when transferring OS X and the boot drive location from the current drive to the SSD?
Any guidance, no matter how partial is greatly appreciated.
Thank you.

I put an OWC SSD drive in my late 2009 21.5" iMac. Note that your model computer has a link speed limit to 3G, so putting a 6 G will not give you more than 3G link speed. Furthermore, putting a 6G SSD in this model might also throttle down the actual speed to 1.5G. Not sure about other model drives, but that is noted in the fine print at OWC. Read the compatibility issues for your model computer, especially about the link speed issue
There is also the issue of the temp sensor which is located internally on the hard drive for this model and later. So you will have to make special adaptations to install any drive other than direct same type compatilbe replacements in the main bay. OWC also sells an adapter sensor cable for this, but I think it cost around $45.
One thing that drove me to OWC was the fact that they do not recommend using TRIM with their drives. That is a debatable issue about using TRIM with other drives, so if you go with another brand, you might want to research that topic before choosing another brand other than OWC. Many have stated no problem without using TRIM enabler software using some of the other brands like Samsung SSD drives.
What I did is left the internal drive in the main drive bay and installed an OWC SSD in the optical bay using the data doubler adapter. This has worked out great for me and I use the main drive as a backup drive. There are several sizes available in the 3G model. I chose the 240gig.
The whole kit with the data doubler is in the link here:
http://eshop.macsales.com/item/OWC/DDIMSSD240/
Not saying you will get blazing performance with this like 6G compatible speeds would give, but as I said, your computer hardware is limited. But your sustained Read/Write speeds will basically double, and the Random Read/Write will go up tremendously.
You will definitely be pleased with the performance increase.
Once I installed the drive, I just used Disk Utility to format the SSD drive and then restored the whole internal drive to the SSD drive. Everything copied including the recovery partition to the new drive. Once the restore was done, just changed startup disk and booted into the SSD. Was very simple.

Late 2009 iMac 27" as display for gaming desktop?

I'm looking at buying a gaming desktop with a high end graphics card. I know that the late 2009 imac can use the "mini-displayport" to be used as a monitor for the pc, but the graphics card on my desktop will only have a "displayport." The card comes with a DisplayPort to Mini-DisplayPort cable, which would allow them to connect, but will it be compatible for Target Display mode? Some people have reported success online, but i could be missing information.

Hello CDeuschel,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Target Display Mode: Frequently Asked Questions (FAQ)
http://support.apple.com/kb/ht3924
Can I use the iMac in TDM as a display for my gaming console, DVD player, or other device?
The Mini DisplayPort port on a supported iMac can receive DisplayPort compliant video and audio signals. Converters not made by Apple may provide options to convert other electrical, video, and audio protocols to Mini DisplayPort or Thunderbolt compliant signals.
Best of luck,
Mario

Can I replace my HDD in my late 2009 iMac myself?

can I replace my HDD in my late 2009 iMac myself? The current drive is toast and I've heard that late 2009 Apple started using HDDs with thermal sensors.
If I can replace it, any suggested makes/models?

Here is a link to an article that covers the harddrive issue in great detail:
http://blog.macsales.com/10146-apple-further-restricts-upgrade-options-on-new-im acs
The short answer is maybe. How tech savvy are you? It would require disassembling the iMac, removing the LCD panel and installing your replacement components. The job is primarily complicated by the wiring being very short and needing at least 4 hands to get things neatly unplugged and replugged. There are lots of YouTube vids of these teardowns, it is doable because people do it, the question remains can you?
http://www.youtube.com/watch?v=P70WzU0ABBs

Why I can´t install 8GB RAM DDR3 1333MHZ in a MacBook late 2009?

Why I can´t install 8GB RAM DDR3 1333MHZ in a MacBook late 2009?

Macs can be very Fussy about RAM...
It is Important to get the Correct and Matching RAM
You can use these Links to check which RAM is suitable for your Mac...
http://eshop.macsales.com/shop/apple/memory/
http://www.crucial.com
Those sites also have videos on how to Install RAM should you need it....

IMac Late 2009 i7-2.8Ghz Poor Performance

My iMac Late 2009 seems to run very slowly after a clean install of OSX Mavericks. I am not sure that happened after the clean install. But now i have noticed it.
I am using mainly photoshop. Everything is sluggish. Moving or resizing layers.
Generally it runs very slow with everything.
The surprising fact is after i ran GeekBench.
The average score for 32-bit test is about 2000 for single-core and 7000 in multi-core
My results are: 700 for single-core and 3000 in multi-core.
Few users seem to have about the same results as me..
My specs are:
Late 2009 iMac
intel i7 2.8Ghz
12GB of Ram
ATI Radeon HD 4850 512 MB
Kingston SSDNow V300 120GB with trim enabled (i upgraded my ssd after my old corsair 90GB ssd broke!!!)
OSX Mavericks 10.9.3
You can see all the iMac Late 2009 i7 2.8Ghz results here.
http://goo.gl/yuoQvm
Do you have any suggestions?
it drive me crazy!!
I am considering a clean install but i want to wait for the Yosemite release.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
Copy a line of text in this window to the Clipboard.
Paste into the window of another application.
Wait for the test to run. It usually takes a few minutes.
Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/ { next;} /(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' 's/0/Off/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;D12 26 48 59 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Imac late 2009 chimes but wont startup

Late 2009 27” iMac i7 2.66GHz w/ 8GB ram
let me preface this by saying that Ive searched for answers to this specific problem for days without any luck. I have a late 2009 iMac 27" i7, a few days ago, when I was out, and it was presumably asleep, it stopped working. When I returned, I tried to wake it but it wouldnt wake up, I noticed that the back of the machine was very hot, so I restarted it. It would chime, but the screen would remain black. I tried different ways of restarting, different screen, installer thumbdrive, target mode, safe mode, etc. Everytime, I would hear the chime, I can feel one of the drives spinning, but nothing. Unfortunately, I had only set this system up about 4 weeks ago, and had forgotten to turn my file sharing on, so I can use Screen Sharing to try to control it. Though I dont think its actually on because I dont see the machine listed in my wireless network anymore. so I guess it really doesnt matter. Another thing that it doesnt let me do is zap the PRAM. I’ll hold the keys down before the chime, and again nothing.
Here a little history about this machine. Ive had this machine since early 2010, its been a work horse, and has never given me much problems aside from a failed harddrive, which I replaced with an SSD. Also, Recently the CD drive failed on me, so I took it out and replaced it with an SSD, so now I have an ssd where the diskdrive was, and also added a 1tb 3.5 Drive into the original drive bay. All has been running smooth for about 4 weeks.
Anyone have any suggestions?

Have you tried holding down the power button until the computer shutdown, holding it until boot up chime. Possiblly something wrong with the display? My family has the same computer and there have been boot-up issues too, so maybe a recurring problem? between tries, give it a few minutes and unplug, otherwise take it in. Also try to vacuum the dust out of the slot vent in the back or clean out the computer. If you can't get it to work and do not want to take it in, use target mode and connect another computer via usb to retrieve important files. Good Luck!

IMac late 2009 with 6GB RAM, slow with Yosemite

Have you ever used that small pc computers with slow processors, called netbooks? This is what my super fast iMac late 2009 (6GB RAM) with Mavericks turned into, after upgrading it to Yosemite OS X.
I mean, processor itself doesn't look to busy, but user experience is click and wait (when nothing happens, I almost want to click again but then action happens). Opening window animation is like slide show - it is not smooth as it was before, with Mavericks.
Anybody with iMac late 2009 can confirm this or is it my setup only?
I have the basic late 2009 model, except I upgraded it to 6GB RAM soon after I purchased it.
This is how my About this Mac looks like:
And this is how my hard disks look like:
Nothing specially busy here, just slow Yosemite. When I open Safari, Mail, iPhoto and iTunes, it is not good to open any other app, because I might wait much more. I caught my self using iPad while opening fifth app on iMac (just to get an idea, how very slow it feels).

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Hi, we are using mac mini's for our developement purpose. connecting the same through using Real VNC. Mac mini's are late 2009 and 2010. Now we have upgraded them to 10.8.5. after upgrading having display issues after launching the simulators

hi, we are using mac mini's for our developement purpose. connecting the same through using Real VNC. Mac mini's are late 2009 and 2010. Now we have upgraded them to 10.8.5. after upgrading having display issues after launching the simulators, we are unable to view the icons we need to move the simulator (into different places) to view the icons.
Also we are having Mac book pro's (Late 2009 & 2010) after upgrading them to 10.8.5. Unable to launch the mac, getting only white screen with apple icon.
Let me know is there any specific Hardware (Graphic Cards) we need to use for the same.
Please provide me the early solutions.
Regards,
Suresh.

Hi, try this first...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.

Can i use Airdrop on late 2009 macbook unibody ?

Hello,
I am using A1342 late 2009 unibody macbook(OS X Yosemite) and I want to share my photos to my iPad mini (IOS 8.1) via Airdrop but I am unable to do and Handoff too.
I tried myself by restarting both the devices many times but always got the same result.
Kindly revert me on this.

System Requirements
To see if your Mac works with AirDrop, make sure you’re in the Finder by clicking the desktop (the background area of your screen), or by clicking the Finder icon in the Dock. Then, check to see if AirDrop is listed as an option in the Go menu. If you don't see AirDrop listed, your Mac doesn't support this feature.
In order to transfer files between a Mac and and an iPhone, iPad or iPod touch, your iOS device needs iOS 7 or later installed and your Mac needs to be a 2012 or later model. To transfer files between two Mac computers, you need one of the Mac models listed below and OS X Lion or later.
MacBook Pro (Late 2008 or newer)*
MacBook Air (Late 2010 or newer)
MacBook (Late 2008 or newer)*
iMac (Early 2009 or newer)
Mac Mini (Mid 2010 or newer)
Mac Pro (Early 2009 with AirPort Extreme card, or Mid 2010)
*The MacBook Pro (17-Inch Late 2008) and the white MacBook (Late 2008) do not support AirDrop.
For help identifying your Apple product, choose About This Mac from the Apple menu, or refer to the Apple Support website.
Mac Basics: AirDrop lets you send files from your Mac to nearby Macs and iOS devices - Apple Support

Late 2009 mb white uses pc8500 dd3 pc 1066mhz ram

Similar Messages

Maybe you are looking for