Late Start in Regions

Hi
Can someone tell me what to do about late first notes in some regions? I've got a bass drum note on beat one of measure one that won't play unless I back it away from beat one 20 ticks or so. It plays okay on cycles or loops but not on the starting beat. I've quantized and shuffled back and forth in the matrix editor to no avail.

There were many such problems in LE7 and LP7. Is your song starting on 1 1 1 1? If so, move the song to start at 2 1 1 1 and see if that fixes it.

Similar Messages

Early start & lates start date

Hi experts,
I want to change the early start & latest start date which are in grey mode of maintenance order operation direcly instead of changing the order basic start date .How can I do it? please through some clues.thanks

Hi,
Can you please try this.
1. IW32, go to Operations tab, Select Operation 10 (assuming you only have one operation)
2. Click the "Dates" button from the buttons at teh bottom
3. On the Restrictions tab, StartPoitn, Select "Must Start On", then specify the Date you want to start the work on the right
4. Save the Work Order
Regards,
Joey

E5:after update to 081.004.Now 3months later start...

always hangs for 5-10min. 1-2 times a day.to remove hanging i restart my E5.plz update something for it.
my phone
free memory 130mb
total apps install 55 among 29 from nokia store
always up-to-date always all apps and FW

See Here
Unable to Update or Restore
http://support.apple.com/kb/HT1808

FMS 3.02 late-starts mp3s with id3

Hi all,
I hope someone else has seen this!
I've found that mp3 files that have id3 tags (i.e. almost all
of them) don't stream properly via FMS using rtmp.
Here's an easy way to see the issue. Go to
http://jonathan.podomatic.com/
and click the "Play" button at Episode 17. It will play properly.
Then try the same thing with Episode 16. Episode 16 is the exact
same media file, but 17 has no id3 tag and 16 has one.
We're using the sample "vod" application for streaming using
RTMP.

Deeper investigation reveals that it's the id3v2 APIC frame
that is causing FMS to malfunction. On media that has the APIC
frame, FMS skips the first few seconds of the media on playback via
RTMP. On media without the APIC frame, FMS initiates playback
correctly.
For your listening pleasure, one with the APIC and one
without.
WITHOUT the frame:
rtmp://luke.dc.podomatic.com/vod/mp3:with_tag
WITH the frame:
rtmp://luke.dc.podomatic.com/vod/mp3:with_cover_art

Schedule run issue: Late dates earlier than start/finish dates

Hi,
I am running into an issue with one of my contractors. When the contractor sends the xer file, all the critical late start dates are a day earlier than the start date i.e. if the start date is Mar 03, 2011 then the late start date is Mar 02, 2011. I am able to fix it at my end when I run the schedule but the contractor is not. Is there some feature in the global setting that the contractor has to fix in his end to resolve this issue? Any help or advice would be great.
Thanks.

Marc,
When Project was first released there were only two basic start field, Start and Actual Start (in addition of course to the Baseline Start field and a few others). With the release of Project 2010, a manual scheduling mode was introduced. That's when things
got a little more confusing. Instead of leaving the Start date as is, the Start field was converted to a text field and the old Start field was renamed as Scheduled Start. When in auto-schedule mode, both Start and Scheduled Start are exactly the same.
Now to answer your questions. To keep it simple, let's assume you are using auto-scheduling.
1. In order to keep the schedule dynamics intact, it is necessary to update the Start field to agree with what really happened, namely with the Actual Start date. If you do not enter anything into the Actual Start field, Project automatically assumes the
task started as scheduled, on the Start date.
2, Yes, Project does its scheduling based on the current plan which is represented by start, finish and other data. Once the project starts, that current plan must be updated so the actual date values come into play. As noted in the lead in paragraph, Scheduled
Start and Start are the same for auto-scheduled tasks.
3. Earned value is based on the actual values and the saved baseline data. The "point in time" you refer to is the timescaled data as of the status date.
Hopefully, this clear up at least some of your confusion.
John

Hide 'No data found' msg in report region when you 1st click search page

Hi,
(sorry if it's confusing but my APEX is in FRENCH and I tried to translate)
I created a search page in my application.
1- I have an HTML region, with a search box and I search button
2- I've got a report region (PL/SQL source) which sometimes returns no data, giving a 'No Data Found.' message.
When I click on the search page for the 1st time (on my navigation bar), I would like to HIDE the report region so I don't have the " No Data Found" message.
Only Once we click on the search button and there is no result, I want to have the message "No Data FOund"
How can I achieve this?
thanks
Roseline

1. create a hidden element on your page (P1_HIDDEN_ELEMENT)
2. put your No Data Found message in a span tag
<span id="no_data_found">No Data Found</span>3. create an on load computation to set your P1_HIDDEN_ELEMENT to 'no_data_found' if it is NULL and to set it to ' ' if it is NOT NULL - type PL/SQL Function Body
BEGIN
   IF :p1_hidden_element IS NULL
   THEN
      RETURN '<script>html_HideElement(''no_data_found'');</script>';
   ELSIF :p1_hidden_element IS NOT NULL
   THEN
      RETURN ' ';
   END IF;
END;4. Put this into the page footer:
&P1_HIDDEN_ELEMENT.The other solution would be to create a display region - pure HTML and to display that first. Once the search is started that region would remain hidden and only the report would show up.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
http://www.amazon.de/Oracle-APEX-XE-Praxis/dp/3826655494
-------------------------------------------------------------------

Cannot start Virtual Machine - OVMAPI_4010E Attempt to send command: dispat

1. Instaleed Virtualbox on Windows 7
2. Installed OracleVM-Manager-3.1.1-build365.ova and OracleVM-Server-3.1.1-build365.ova
3. Completed repository and server pool. They are all runing fine.
4. Crated a Virtual Machine for Linux and tried to start the Virtual Machine and got the following error.
Any comments or help would be appreciated.
Thank you...
ob Construction Phase
begin()
Appended operation 'Virtual Machine Start' to object '0004fb00000600009526838f3d4be255 (first vm)'.
Appended operation 'Bridge Configure Operation' to object '0004fb0000200000b137e9cddcdd09b8 (network.BondPort (1) in myserver1.example.com)'.
commit()
Completed Step: COMMIT
Objects and Operations
Object (IN_USE): [VmDiskMapping] 0004fb00001300008e359279b91c2804
Object (IN_USE): [Vnic] 0004fb0000070000cca7bba64be932d0 (00:21:f6:00:00:09)
Object (IN_USE): [VirtualMachine] 0004fb00000600009526838f3d4be255 (first vm)
Operation: Virtual Machine Start
Object (IN_USE): [BondPort] 0004fb0000200000b137e9cddcdd09b8 (network.BondPort (1) in myserver1.example.com)
Operation: Bridge Configure Operation
Object (IN_USE): [VmDiskMapping] 0004fb0000130000d15838ce48a895f1
Object (IN_USE): [VirtualCdrom] EMPTY_CDROM
Object (IN_USE): [VirtualDisk] 0004fb0000120000efbd814b4b7c0e8d.img
Job Running Phase at 14:57 on Sun, Jul 29, 2012
Job Participants: [c7:c1:6e:69:b9:a7:41:d6:8d:8e:bc:d5:fd:c3:c4:7d (myserver1.example.com)]
Actioner
Starting operation 'Virtual Machine Start' on object '0004fb00000600009526838f3d4be255 (first vm)'
Completed operation 'Virtual Machine Start' completed with direction ==> LATER
Starting operation 'Bridge Configure Operation' on object '0004fb0000200000b137e9cddcdd09b8 (network.BondPort (1) in myserver1.example.com)'
Bridge [192.168.1.0] already exists (and should exist) on interface [bond0] on server [myserver1.example.com]; skipping bridge creation
Completed operation 'Bridge Configure Operation' completed with direction ==> DONE
Starting operation 'Virtual Machine Start' on object '0004fb00000600009526838f3d4be255 (first vm)'
Job Internal Error (Operation)com.oracle.ovm.mgr.api.exception.FailedOperationException: OVMAPI_4010E Attempt to send command: dispatch to server: myserver1.example.com failed. OVMAPI_4004E Server Failed Command: dispatch https://?uname?:[email protected]:8899/api/2 start_vm 0004fb00000300003907f6fd90ef0e08 0004fb00000600009526838f3d4be255, Status: org.apache.xmlrpc.XmlRpcException: exceptions.RuntimeError:Command: ['xm', 'create', '/OVS/Repositories/0004fb00000300003907f6fd90ef0e08/VirtualMachines/0004fb00000600009526838f3d4be255/vm.cfg'] failed (1): stderr: Error: HVM guest support is unavailable: is VT/AMD-V supported by your CPU and enabled in your BIOS?
stdout: Using config file "/OVS/Repositories/0004fb00000300003907f6fd90ef0e08/VirtualMachines/0004fb00000600009526838f3d4be255/vm.cfg".
Sun Jul 29 14:57:14 PDT 2012
Sun Jul 29 14:57:14 PDT 2012
at com.oracle.ovm.mgr.action.ActionEngine.sendCommandToServer(ActionEngine.java:507)
at com.oracle.ovm.mgr.action.ActionEngine.sendDispatchedServerCommand(ActionEngine.java:444)
at com.oracle.ovm.mgr.action.ActionEngine.sendServerCommand(ActionEngine.java:378)
at com.oracle.ovm.mgr.action.VirtualMachineAction.sendStartVmCommand(VirtualMachineAction.java:121)
at com.oracle.ovm.mgr.op.virtual.VirtualMachineStart.asyncAction(VirtualMachineStart.java:65)
at com.oracle.ovm.mgr.api.collectable.ManagedObjectDbImpl.executeCurrentJobOperationAsyncAction(ManagedObjectDbImpl.java:1002)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:329)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:289)
at com.oracle.odof.core.storage.Transaction.invokeMethod(Transaction.java:826)
at com.oracle.odof.core.Exchange.invokeMethod(Exchange.java:245)
at com.oracle.ovm.mgr.api.virtual.VirtualMachineProxy.executeCurrentJobOperationAsyncAction(Unknown Source)
at com.oracle.ovm.mgr.api.job.JobEngine.objectAsyncStart(JobEngine.java:596)
at com.oracle.ovm.mgr.op.virtual.VirtualMachineStart.action(VirtualMachineStart.java:52)
at com.oracle.ovm.mgr.api.collectable.ManagedObjectDbImpl.executeCurrentJobOperationAction(ManagedObjectDbImpl.java:1012)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:329)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:289)
at com.oracle.odof.core.storage.Transaction.invokeMethod(Transaction.java:826)
at com.oracle.odof.core.Exchange.invokeMethod(Exchange.java:245)
at com.oracle.ovm.mgr.api.virtual.VirtualMachineProxy.executeCurrentJobOperationAction(Unknown Source)
at com.oracle.ovm.mgr.api.job.JobEngine.operationActioner(JobEngine.java:218)
at com.oracle.ovm.mgr.api.job.JobEngine.objectActioner(JobEngine.java:309)
at com.oracle.ovm.mgr.api.job.InternalJobDbImpl.objectCommitter(InternalJobDbImpl.java:1140)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:329)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:289)
at com.oracle.odof.core.BasicWork.invokeMethod(BasicWork.java:136)
at com.oracle.odof.command.InvokeMethodCommand.process(InvokeMethodCommand.java:100)
at com.oracle.odof.core.BasicWork.processCommand(BasicWork.java:81)
at com.oracle.odof.core.TransactionManager.processCommand(TransactionManager.java:773)
at com.oracle.odof.core.WorkflowManager.processCommand(WorkflowManager.java:401)
at com.oracle.odof.core.WorkflowManager.processWork(WorkflowManager.java:459)
at com.oracle.odof.io.AbstractClient.run(AbstractClient.java:42)
at java.lang.Thread.run(Thread.java:662)
Caused by: com.oracle.ovm.mgr.api.exception.IllegalOperationException: OVMAPI_4004E Server Failed Command: dispatch https://?uname?:[email protected]:8899/api/2 start_vm 0004fb00000300003907f6fd90ef0e08 0004fb00000600009526838f3d4be255, Status: org.apache.xmlrpc.XmlRpcException: exceptions.RuntimeError:Command: ['xm', 'create', '/OVS/Repositories/0004fb00000300003907f6fd90ef0e08/VirtualMachines/0004fb00000600009526838f3d4be255/vm.cfg'] failed (1): stderr: Error: HVM guest support is unavailable: is VT/AMD-V supported by your CPU and enabled in your BIOS?
stdout: Using config file "/OVS/Repositories/0004fb00000300003907f6fd90ef0e08/VirtualMachines/0004fb00000600009526838f3d4be255/vm.cfg".
Sun Jul 29 14:57:14 PDT 2012
at com.oracle.ovm.mgr.action.ActionEngine.sendAction(ActionEngine.java:798)
at com.oracle.ovm.mgr.action.ActionEngine.sendCommandToServer(ActionEngine.java:503)
... 41 more
FailedOperationCleanup
Starting failed operation 'Virtual Machine Start' cleanup on object 'first vm'
Complete rollback operation 'Virtual Machine Start' completed with direction=first vm
Rollbacker
Executing rollback operation 'Virtual Machine Start' on object '0004fb00000600009526838f3d4be255 (first vm)'
Complete rollback operation 'Virtual Machine Start' completed with direction=DONE
Executing rollback operation 'Bridge Configure Operation' on object '0004fb0000200000b137e9cddcdd09b8 (network.BondPort (1) in myserver1.example.com)'
Complete rollback operation 'Bridge Configure Operation' completed with direction=DONE
Objects To Be Rolled Back
Object (IN_USE): [VmDiskMapping] 0004fb00001300008e359279b91c2804
Object (IN_USE): [Vnic] 0004fb0000070000cca7bba64be932d0 (00:21:f6:00:00:09)
Object (IN_USE): [VirtualMachine] 0004fb00000600009526838f3d4be255 (first vm)
Object (IN_USE): [BondPort] 0004fb0000200000b137e9cddcdd09b8 (network.BondPort (1) in myserver1.example.com)
Object (IN_USE): [VmDiskMapping] 0004fb0000130000d15838ce48a895f1
Object (IN_USE): [VirtualCdrom] EMPTY_CDROM
Object (IN_USE): [VirtualDisk] 0004fb0000120000efbd814b4b7c0e8d.img
Write Methods Invoked
Class=InternalJobDbImpl vessel_id=1342 method=addTransactionIdentifier accessLevel=6
Class=VirtualMachineDbImpl vessel_id=1085 method=start accessLevel=6
Class=VnicDbImpl vessel_id=958 method=lock accessLevel=6
Class=VirtualCdromDbImpl vessel_id=209 method=lock accessLevel=6
Class=VirtualDiskDbImpl vessel_id=1107 method=lock accessLevel=6
Class=VnicDbImpl vessel_id=958 method=lock accessLevel=6
Class=VmDiskMappingDbImpl vessel_id=1116 method=lock accessLevel=6
Class=VmDiskMappingDbImpl vessel_id=1122 method=lock accessLevel=6
Class=VirtualCdromDbImpl vessel_id=209 method=lock accessLevel=6
Class=VirtualDiskDbImpl vessel_id=1107 method=lock accessLevel=6
Class=VirtualMachineStartingEventDbImpl vessel_id=1351 method=notify accessLevel=6
Class=VirtualMachineStartingEventDbImpl vessel_id=1351 method=setDescription accessLevel=6
Class=BondPortDbImpl vessel_id=554 method=addJobOperation accessLevel=6
Class=InternalJobDbImpl vessel_id=1342 method=setCompletedStep accessLevel=6
Class=InternalJobDbImpl vessel_id=1342 method=setAssociatedHandles accessLevel=6
Class=InternalJobDbImpl vessel_id=1342 method=setTuringMachineFlag accessLevel=6
Class=VirtualMachineDbImpl vessel_id=1085 method=setCurrentOperationToLater accessLevel=6
Class=InternalJobDbImpl vessel_id=1342 method=setTuringMachineFlag accessLevel=6
Class=BondPortDbImpl vessel_id=554 method=setCurrentJobOperationComplete accessLevel=6
Class=BondPortDbImpl vessel_id=554 method=nextJobOperation accessLevel=6
Class=VirtualMachineDbImpl vessel_id=1085 method=nextJobOperation accessLevel=6
Class=InternalJobDbImpl vessel_id=1342 method=setFailedOperation accessLevel=6
Class=VmDiskMappingDbImpl vessel_id=1116 method=nextJobOperation accessLevel=6
Class=VnicDbImpl vessel_id=958 method=nextJobOperation accessLevel=6
Class=VirtualMachineDbImpl vessel_id=1085 method=nextJobOperation accessLevel=6
Class=BondPortDbImpl vessel_id=554 method=nextJobOperation accessLevel=6
Class=VmDiskMappingDbImpl vessel_id=1122 method=nextJobOperation accessLevel=6
Class=VirtualCdromDbImpl vessel_id=209 method=nextJobOperation accessLevel=6
Class=VirtualDiskDbImpl vessel_id=1107 method=nextJobOperation accessLevel=6
Class=VirtualMachineDbImpl vessel_id=1085 method=nextJobOperation accessLevel=6
Class=BondPortDbImpl vessel_id=554 method=nextJobOperation accessLevel=6
Completed Step: ROLLBACK
Job failed commit (internal) due to OVMAPI_4010E Attempt to send command: dispatch to server: myserver1.example.com failed. OVMAPI_4004E Server Failed Command: dispatch https://?uname?:[email protected]:8899/api/2 start_vm 0004fb00000300003907f6fd90ef0e08 0004fb00000600009526838f3d4be255, Status: org.apache.xmlrpc.XmlRpcException: exceptions.RuntimeError:Command: ['xm', 'create', '/OVS/Repositories/0004fb00000300003907f6fd90ef0e08/VirtualMachines/0004fb00000600009526838f3d4be255/vm.cfg'] failed (1): stderr: Error: HVM guest support is unavailable: is VT/AMD-V supported by your CPU and enabled in your BIOS?
stdout: Using config file "/OVS/Repositories/0004fb00000300003907f6fd90ef0e08/VirtualMachines/0004fb00000600009526838f3d4be255/vm.cfg".
Sun Jul 29 14:57:14 PDT 2012
Sun Jul 29 14:57:14 PDT 2012
com.oracle.ovm.mgr.api.exception.FailedOperationException: OVMAPI_4010E Attempt to send command: dispatch to server: myserver1.example.com failed. OVMAPI_4004E Server Failed Command: dispatch https://?uname?:[email protected]:8899/api/2 start_vm 0004fb00000300003907f6fd90ef0e08 0004fb00000600009526838f3d4be255, Status: org.apache.xmlrpc.XmlRpcException: exceptions.RuntimeError:Command: ['xm', 'create', '/OVS/Repositories/0004fb00000300003907f6fd90ef0e08/VirtualMachines/0004fb00000600009526838f3d4be255/vm.cfg'] failed (1): stderr: Error: HVM guest support is unavailable: is VT/AMD-V supported by your CPU and enabled in your BIOS?
stdout: Using config file "/OVS/Repositories/0004fb00000300003907f6fd90ef0e08/VirtualMachines/0004fb00000600009526838f3d4be255/vm.cfg".
Sun Jul 29 14:57:14 PDT 2012
Sun Jul 29 14:57:14 PDT 2012
at com.oracle.ovm.mgr.action.ActionEngine.sendCommandToServer(ActionEngine.java:507)
at com.oracle.ovm.mgr.action.ActionEngine.sendDispatchedServerCommand(ActionEngine.java:444)
at com.oracle.ovm.mgr.action.ActionEngine.sendServerCommand(ActionEngine.java:378)
at com.oracle.ovm.mgr.action.VirtualMachineAction.sendStartVmCommand(VirtualMachineAction.java:121)
at com.oracle.ovm.mgr.op.virtual.VirtualMachineStart.asyncAction(VirtualMachineStart.java:65)
at com.oracle.ovm.mgr.api.collectable.ManagedObjectDbImpl.executeCurrentJobOperationAsyncAction(ManagedObjectDbImpl.java:1002)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:329)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:289)
at com.oracle.odof.core.storage.Transaction.invokeMethod(Transaction.java:826)
at com.oracle.odof.core.Exchange.invokeMethod(Exchange.java:245)
at com.oracle.ovm.mgr.api.virtual.VirtualMachineProxy.executeCurrentJobOperationAsyncAction(Unknown Source)
at com.oracle.ovm.mgr.api.job.JobEngine.objectAsyncStart(JobEngine.java:596)
at com.oracle.ovm.mgr.op.virtual.VirtualMachineStart.action(VirtualMachineStart.java:52)
at com.oracle.ovm.mgr.api.collectable.ManagedObjectDbImpl.executeCurrentJobOperationAction(ManagedObjectDbImpl.java:1012)
at sun.reflect.GeneratedMethodAccessor683.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:329)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:289)
at com.oracle.odof.core.storage.Transaction.invokeMethod(Transaction.java:826)
at com.oracle.odof.core.Exchange.invokeMethod(Exchange.java:245)
at com.oracle.ovm.mgr.api.virtual.VirtualMachineProxy.executeCurrentJobOperationAction(Unknown Source)
at com.oracle.ovm.mgr.api.job.JobEngine.operationActioner(JobEngine.java:218)
at com.oracle.ovm.mgr.api.job.JobEngine.objectActioner(JobEngine.java:309)
at com.oracle.ovm.mgr.api.job.InternalJobDbImpl.objectCommitter(InternalJobDbImpl.java:1140)
at sun.reflect.GeneratedMethodAccessor1084.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:329)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:289)
at com.oracle.odof.core.BasicWork.invokeMethod(BasicWork.java:136)
at com.oracle.odof.command.InvokeMethodCommand.process(InvokeMethodCommand.java:100)
at com.oracle.odof.core.BasicWork.processCommand(BasicWork.java:81)
at com.oracle.odof.core.TransactionManager.processCommand(TransactionManager.java:773)
at com.oracle.odof.core.WorkflowManager.processCommand(WorkflowManager.java:401)
at com.oracle.odof.core.WorkflowManager.processWork(WorkflowManager.java:459)
at com.oracle.odof.io.AbstractClient.run(AbstractClient.java:42)
at java.lang.Thread.run(Thread.java:662)
Caused by: com.oracle.ovm.mgr.api.exception.IllegalOperationException: OVMAPI_4004E Server Failed Command: dispatch https://?uname?:[email protected]:8899/api/2 start_vm 0004fb00000300003907f6fd90ef0e08 0004fb00000600009526838f3d4be255, Status: org.apache.xmlrpc.XmlRpcException: exceptions.RuntimeError:Command: ['xm', 'create', '/OVS/Repositories/0004fb00000300003907f6fd90ef0e08/VirtualMachines/0004fb00000600009526838f3d4be255/vm.cfg'] failed (1): stderr: Error: HVM guest support is unavailable: is VT/AMD-V supported by your CPU and enabled in your BIOS?
stdout: Using config file "/OVS/Repositories/0004fb00000300003907f6fd90ef0e08/VirtualMachines/0004fb00000600009526838f3d4be255/vm.cfg".
Sun Jul 29 14:57:14 PDT 2012
at com.oracle.ovm.mgr.action.ActionEngine.sendAction(ActionEngine.java:798)
at com.oracle.ovm.mgr.action.ActionEngine.sendCommandToServer(ActionEngine.java:503)
... 41 more
End of Job

As far you are using VirtualBox, your processor capabilities shouldn't counted (min from my own experience while setting up the virtual machine. Change the Domain Type under configuation node to XEN PVM and try again. Most probably the virtual machine will start running.
One more thing, enable promiscuous mode -> Allow allow with your network configuration (if bridged network is in use) for the VM Server prior you try to SSH into the virtual machine (your guest on VM Server)
All the best and post your test results
regards,
raj

No data found for region error on Workflow notification page

Hi !
For workflow, I have created a Non Form Function in Oracle Applications and linked the region to display in the notification. This region's type is StackLayout.
I created an attribute of type Document and assigned it the value in the form
JSP:/OA_HTML/OA.jsp?OAFunc=WF_FUNC
then I added this attribute in the notification message attribute with the Source as Send and Frame Traget as Full Window. Now when the workflow starts, the region does not populate and error shows that there is no data found for this region.
Am I doing something wrong? Any ideas?
Thanks.

Hi,
We have a unique problem.....for timecard approval notification the HXC_TIMECARD form function is calling embedded Timecard region in the workflow notification.....in the HTML call the AprvNtfRN is called as shown below.
OA.jsp?page=/oracle/apps/hxc/selfservice/approval/webui/AprvNtfRN&akRegionApplicationId=809
Now the issue is that the email displays uneven format i..e timecard details like project and task name are vertical instead of horizontal.
Is there a way to code HTML in AprvNtfRN so that the format is obtained as desired?

Export all sql reports in a region to csv or pdf

Hello there,
I have a region on a particular page in apex and that region has about 12 different sql query reports.
I have enabled csv option for each of them so there are 12 links to export each report. However
I would like to have only 1 link which will save the contents of all the reports to csv or pdf. The
column headings are different for some of these reports but wanted to know if something like this
is possible.
Thanks in advance for reading this.

You might try wrapping the regions in html regions that essentially give you the ability to specify a valign=top for the report regions.
So, your regions look like this:
30 Report Start - contains region source = (div)<table width="100%" cellspacing="0" cellpadding="0"><tr><td valign="top">
40 Approved Tests Report (Column 2) Conditional
45 Report 2 Start - contains </td><td valign="top">
60 Unapproved Tests Report (Column 2) Conditional
65 Report 3 Start - contains </td><td valign="top">
80 Approved Count by Build Report (Column 2) Conditional
85 Report End - contains "</td></tr></table>(/div)"
Replace () with the angle brackets
Maybe there is a more elegant solution with templates or page level CSS or something..
But that should work.
Edited by: Bob37 on Sep 17, 2010 3:33 PM
Edited by: Bob37 on Sep 17, 2010 3:33 PM

Changing the Media Start point

So I just had a hard drive crash on me and I did not have back-ups of my footage. It's not to bad because I have back-ups of the project file I was working on. So all I was going to do is a Batch Capture to reconnect all of my clips. Only problem is the person I had capture the footage did not leave enough pre-roll when they did a capture now. So now when it tries to re-capture it says "Cannot locate specified timecode"
This is because there is not enough pro-roll on the clip to allow it to batch capture. When I look at the Media Start in the browser window for the clip it says it starts at 00:00:02:31. I need to change this to a later start so it does not try to roll the tape so far back. So.....
How do I change the Media Start Point???
Thanks

Ok, I am following you, I just need to make sure the clips in the edited timeline reconnect with the old master clip.
I could keep the old offline master clip and just make it reconnect to the new captured clip. But will this make all of my already edited clips in my sequence that are looking at the old master clip off by however many seconds I had to reset the in-point to get the tape re-captured?
Thanks for the tip on dragging clips to the L&C window, I did not know you could do that.

Production order Basic start date calculation

Hello PP Sapperu2019s,
I have an production order for total qty - 865,00.This production order created on 11.08.2011 and I could able to see the Basic start date as 26.06.2011.Please let me know how this basic start date gets calculated. I mean what are all the parameters included for calculating this basic start date.
My Observation:
I have checked in OPU3 for the respective plant and order type the scheduling type mentioned as Backward.
SMK u2013 903 (ie, opening period for planned order u2013 3 days)
In Routing we have two operations.
Requesting from forum people to give me the detailed calculation part on how this basic start date gets calculated / arrived.
Please let me know if you need any more inputs.
Cheers,
Kumar.S

Hi Kumar,
As per my understanding this is all decided/maintained through scheduling parameters which are defined in Customizing per order type, plant and production scheduler (from the material master) (Customizing for Shop Floor Control, by choosing Operations > Scheduling > Define Scheduling Parameters). In what follows the parameters are described that affect the scheduling of a production order. Further control parameters are described in the course of this section.
According to your query I suggests ,In Customizing you can specify that an order is rescheduled as soon as it is a certain number of days late (Start in the past indicator). The system then automatically carries out today scheduling when the basic start date of the order is more than the given number of days in the past. This scheduling is a type of forward scheduling starting from todayu2019s date and where the necessary reduction measures are applied .
Else you can also specify that a production order is to be rescheduled automatically whenever it is saved (indicator Automatic scheduling). If changes relevant to scheduling are made in the order and this indicator is not set then the order is given the status NTER (dates not current).
Hope this would be useful for you at some extent.
Please revert if required .
Regards
Chandra

Well a month later, I called back sent me to apple location..gave me new phone ..I have same problem again phone 5 dimming

MY first iPhone5 going dim, brand new out of the box second day after release. Apple did factory restore for me and see if that helped me. Still
happening so they set me up with appointment for new iphone5 at apple outlet. Went home and week later started dimming on its own again, apple has a problem that they need to address and fix in their system correctly

What is the exact wording of the error message? It may be that there is a problem with your computer and is causing the problem, not a problem with the iPod.

How should I start, stop or restart SQL services if it is in a cluster?

Hi,
For migration purpose I need to stop sql server services in a cluster. I don't want to failover the cluster I just want to stop the sql server services before the windows system admin shutdowns the windows server and later start again once migration is done.
This is clone migration so I don't have to do anything except stopping and starting the services of sql. I found two places there to take service offline and online, one is just clicking the services and application and in the right hand side directly right
clicking the instance and take service offline, another is expanding the instance and taking offline agent and sql server service one by one.
I don't know which is the way.
Please some one help me.

Hello,
You can use SQL Server Configuration Manager, SQL Server Management Studio, Cluster Administrator.
Do not use the Services applet in Control Panel.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Aligning SQL reports in a region so that all top edges are aligned

I have 3 SQL report regions in column 2. I would like these to display so their top edges are aligned.
40           Approved Tests     Report (Column 2)     Conditional
60           Unapproved Tests     Report (Column 2)     Conditional
80           Approved Count by Build     Report (Column 2)     Conditional
What actually happens is the reports are all centered vertically around the middle of the largest (tallest) report. Here's a crude ASCII picture:
Approved Tests
Category        #
Area 1          100
Area 2          100             *Unapproved Tests*
Area 3          100             Category        #                   *Approved Count by Build*
Area 4          100             Area 1           50                  11.0.1               700
Area 5          100             Area 2           50
Area 6          100
Area 7          100
Since the leftmost report is the tallest, the other two reports end up centered vertically around the middle of the leftmost report.
Instead, I'd like all the top edges aligned, like this:
Approved Tests               Unapproved Tests              Approved Count by Build
Category        #               Category        #                    11.0.1               700
Area 1          100              Area 1           50
Area 2          100              Area 2           50
Area 3          100
Area 4          100
Area 5          100
Area 6          100
Area 7          100
Nothing I've tried so far has worked. Anyone have an idea how to accomplish this? Thanks...

You might try wrapping the regions in html regions that essentially give you the ability to specify a valign=top for the report regions.
So, your regions look like this:
30 Report Start - contains region source = (div)<table width="100%" cellspacing="0" cellpadding="0"><tr><td valign="top">
40 Approved Tests Report (Column 2) Conditional
45 Report 2 Start - contains </td><td valign="top">
60 Unapproved Tests Report (Column 2) Conditional
65 Report 3 Start - contains </td><td valign="top">
80 Approved Count by Build Report (Column 2) Conditional
85 Report End - contains "</td></tr></table>(/div)"
Replace () with the angle brackets
Maybe there is a more elegant solution with templates or page level CSS or something..
But that should work.
Edited by: Bob37 on Sep 17, 2010 3:33 PM
Edited by: Bob37 on Sep 17, 2010 3:33 PM

Dispatcher process on ABAP + JAVA system does not start.

Hi all,
Dispatcher process on ABAP + JAVA system does not start.
Can someone help me to solve this issue in a ABAP+JAVA stack system?
service p4 ================= ERROR =================
Core service p4 failed. J2EE Engine cannot be started.
com.sap.engine.frame.ServiceException: <--Localization failed: ResourceBundle='com.sap.engine.frame.KernelResourceBundle', ID='Can't assign requested addres
s (errno:227)
com.sap.engine.services.rmi_p4.dispatcher.TransportMonitor constructor : can't open server socket.', Arguments: []--> : Can't find resource for bundle java
.util.PropertyResourceBundle, key Can't assign requested address (errno:227)
com.sap.engine.services.rmi_p4.dispatcher.TransportMonitor constructor : can't open server socket.
        at com.sap.engine.services.rmi_p4.dispatcher.TransportMonitor.<init>(TransportMonitor.java:211)
        at com.sap.engine.services.rmi_p4.dispatcher.P4ServiceFrame.start(P4ServiceFrame.java:93)
        at com.sap.engine.core.service630.container.ServiceRunner.startCommunicationServiceFrame(ServiceRunner.java:228)
        at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:158)
        at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
        at com.sap.engine.core.thread.impl6.SingleThread.execute(SingleThread.java:78)
        at com.sap.engine.core.thread.impl6.SingleThread.run(SingleThread.java:148)
com.sap.engine.frame.ServiceException: <--Localization failed: ResourceBundle='com.sap.engine.frame.KernelResourceBundle', ID='Can't assign requested addres
s (errno:227)
com.sap.engine.services.rmi_p4.dispatcher.TransportMonitor constructor : can't open server socket.', Arguments: []--> : Can't find resource for bundle java
.util.PropertyResourceBundle, key Can't assign requested address (errno:227)
com.sap.engine.services.rmi_p4.dispatcher.TransportMonitor constructor : can't open server socket.
        at com.sap.engine.services.rmi_p4.dispatcher.TransportMonitor.<init>(TransportMonitor.java:211)
        at com.sap.engine.services.rmi_p4.dispatcher.P4ServiceFrame.start(P4ServiceFrame.java:93)
        at com.sap.engine.core.service630.container.ServiceRunner.startCommunicationServiceFrame(ServiceRunner.java:228)
        at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:158)
        at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
        at com.sap.engine.core.thread.impl6.SingleThread.execute(SingleThread.java:78)
        at com.sap.engine.core.thread.impl6.SingleThread.run(SingleThread.java:148)
[Framework -> criticalShutdown] Core service p4 failed. J2EE Engine cannot be started.
Nov 9, 2011 6:41:09 AM              com.sap.engine.core.Framework [SAPEngine_System_Thread[impl:6]_26] Fatal: Critical shutdown was invoked. Reason is: Core
service p4 failed. J2EE Engine cannot be started.
Please let me know if you need any further information in this regard.
with regards,
Raja

Hi,
Core service p4 failed. J2EE Engine cannot be started.
com.sap.engine.frame.ServiceException: <--Localization failed: ResourceBundle='com.sap.engine.frame.KernelResourceBundle', ID='Can't assign requested addres
Please reboot the server to free up occupied ports. Later start the sap system.
Regards,
Deepak kori

Late Start in Regions

Similar Messages

Maybe you are looking for