Lately my iphone 5 is going nuts for some reason. siri pops up for no reason

my phone is going nuts, it seem to activate siri on its on and takes pictures on the home scrren and some time the home button get stuck , please i need your help in solving this issue, my phone is new , it happens sometime when my phone is on a table with nothing touching it

Sounds like you have a home button fault as both symptoms relate to the home button, e.g. Siri is normally activated by holding the home button. Screenshots are normally taken by pressing the sleep/wake button and the home button together so then you are switching on the phone it probably assumes the home button is also being pressed and takes the screenshot.
You will need to make a Genius Bar reservation at your local store and take it in. They are able to replace the home button module on the iPhone 5 which is most likely what they will do. Just ensure you have a backup in case they do decide to replace the phone.

Similar Messages

Can I make firefox defualt for some web shortcuts and IE for others?

I need to make firefox defualt for some web shortcuts and IE for others.

# Type ''about:config'' into the location bar and press enter
# Accept the warning message, this brigs up a list of preferences
# In the filter box type ''check''
# Double-click on the preference browser.cache.check_doc_frequency and change its value to 1
For more details on this preference see http://kb.mozillazine.org/Browser.cache.check_doc_frequency

Looking for Some Recommendations on A Printer for the 15" MPB

Hello-
I have a 15" retina display MBP configured in the works. I have only used Cannon printers in the past with my Apple computers and prefer to stay with a Cannon for the new MBP retina dispaly. I am looking for some personal recommendations to look at from people that have a current Cannon printer/scanner and are pleased with the machine.

I got one with my computer that I love. I'm a fan of all-in-ones because I have every function there if I need it. Plus, this one has airprint, so you can have the printer join your wifi network, and instantly print to it from any iOS device or Mac without any setup - it just works.
http://www.usa.canon.com/cusa/consumer/products/printers_multifunction/photo_all _in_one_inkjet_printers/pixma_mg4120

Mail rules work for some users, don't work for others

Ready to pull my hair out over this one:
Leopard to Snow Leopard upgrade went uneventfully, except for the fact that server-side mail rules (accessed via browser at FQDN -> Mail Rules) work for several users (two, to be exact) and don't for the rest (about 15 or so).
The usual culprits have been reviewed: 'Enable Server-Side Mail Rules' is checked in Mail -> Settings -> Filters, 'Allow users to configure server-side mail rules' is checked in Web -> Sites -> Web Services, users can create vacation notices and email rules without issue via browser, permissions look fine on the contents of /Library/Email Rules and /var/spool/imap/dovecot/sieve-scripts, logs give no indication of any foul play (at least the Email Rules -> debug.log generates the same entries for both functional and non-functional users), etc.
I have noticed that /var/spool/imap/dovecot/sieve-scripts contains only two items, which - you guessed it - line up with the GUIDs of the two functional users. Theoretically every user with a rule should be represented here.
As suggested in this thread:
http://discussions.apple.com/thread.jspa?messageID=11171395&#11171395
I created both a vacation notice and an email rule for several users, thinking that may force the folder creation for those users, but no dice. I even manually created folders for a few users with their GUIDs as the folder names and assigned each user ownership and read/write access. Still nothing. Created a few new test user accounts just to rule out any legacy account weirdness (although it's worth noting that I completely redid the OD and recreated user accounts after the upgrade) and replicated the problem with these, as well. Lastly, used Inspector to compare OD attributes between functional and non-functional accounts, with no glaring differences.
Help!

Did you find an answer? I encounter the same problem on my new MiniServer. Deleted and created all users several times, but just for some accounts mail is working.
Do you have the answer?
(new to this site, read a lot already, but not found)

My email address has changed on iphone, but the orignal old email address keeps popping up for password and I cannot reset it as my old email address was hijacked and closed. How can i use my current email address for all iphone functions?

I have iphone4s with the operating system of 8.1. I changed my email address which was used to register my iphone due to hijacking. I am able to read all my emails using the new address. However, I can not download apps as it keep asking me to provide the password for the original registered email address. I do not have the access to the email address, so I can not retreive the password. I want to clear this mess by resetting everything, and register my current email address as the only one to communicate on my iphone. Please teach me how?

settings - app/iTunes store - sign out and sign back in with your new id.
Note - if your older apps needs an update it will use your old apple id and password, as Apps are tied to the apple id that was used to purchase it.
You can't merge apple id.

I've set the download settings to always ask where to save a file, and it will do that for some file extensions, but not for others. How can I fix this?

I've noticed it especially with .pdf files, which always end up on my desktop, even after I double check the download settings under Preferences and then restart Firefox, just in case. Also, when I download .pdf files they will automatically open, but when I download .doc files they do not. I would rather not have downloaded files automatically open, but I can't find how to change that setting either.

You can check for problems with preferences.
Rename or delete the prefs.js file and possible numbered prefs-##.js and user.js files to reset all prefs to the default value.
*http://kb.mozillazine.org/Preferences_not_saved
*http://kb.mozillazine.org/Resetting_preferences

Purchase Order missing for some of the Sales Order for few customers

Hi All,
There are few sales orders for which corresponding PO is missing.
But most of other Sales orders for the same set of customers, PO is coming.
Could you please enlighten me how this PO is assigned to the Sales order or it is updated with the Inbound Idoc ..
In any case what may be the reason for PO missing for these sales order...How I can explore this...?
Thanks,
Sanjeet

Hi sanjeet,
If your IDOC is ORDERS05, Check if you are getting the PO Number in : E1EDK01-BELNR
Regards,
Ravi

I need Active X plug-in for some features my brokerage website for Jave and Adobe Reader to properly function. You have blocked Active X. How do I get it to wo

My brokerage requires Active X in order for Adobe Reader and Java to function. Without Active X neither work. After a lengthy session with their tech staff I was told to contact you or use IE. I hate IE. IE is the whole reason I got FF back when you folks first updated it to FF 0.7. That was in early '04. I haven't looked back. I HATE IE!
PLEASE DO NOT TELL ME TO USE IE.
If Active X is so bad, why does Google Chrome use it? Is it not a security thing but rather a licensing issue?

Firefox does not support ActiveX. It's proprietary so that's why. But I found a solution for you. Download this http://code.google.com/p/ff-activex-host/downloads/detail?name=ffactivex-setup-r39.exe&can=2&q=
This will allow you to have Active X working.

How can I use jbo:ShowValue for some columns and bc4juix:RenderValue for other co

Using a UIX/JSP page, how can I get the <jbo:ShowValue> tag to work in the following situation? I've ditched the "AttributeIterate" so that I can manually select the columns I want.
--- snip ---
<uix:form name="form1" method="GET">
<bc4juix:Table datasource="ds1" >
<uix:columnHeaderStamp>
<uix:styledText textBinding="LABEL"/>
</uix:columnHeaderStamp>
<%--
<jbo:AttributeIterate id="dsAttributes" datasource="ds1" hideattributes="UixShowHide">
<bc4juix:RenderValue datasource="ds1" dataitem="<%=dsAttributes.getName()%>" />
</jbo:AttributeIterate>
--%>
<bc4juix:RenderValue datasource="ds1" dataitem="FacilityDesc" />
<bc4juix:RenderValue datasource="ds1" dataitem="LocationId" />
<bc4juix:RenderValue datasource="ds1" dataitem="LocationDesc" />
<%-- ** THE FOLLOWING DOES NOT DISPLAY ON THE BROWSE_EDIT_PAGE ** --%>
<jbo:ShowValue datasource="ds1" dataitem="Notes" ></jbo:ShowValue>
<%-- ** THE FOLLOWING DOES NOT DISPLAY ON THE BROWSE_EDIT_PAGE ** --%>
<uix:rawText>
<jbo:ShowValue datasource="ds1" dataitem="Notes" ></jbo:ShowValue>
</uix:rawText>
<%-- ** THE FOLLOWING DOES NOT DISPLAY ON THE BROWSE_EDIT_PAGE ** --%>
<uix:contents>
<uix:rawText>
<jbo:ShowValue datasource="ds1" dataitem="Notes" ></jbo:ShowValue>
</uix:rawText>
</uix:contents>
--- snip ---
What am I doing wrong and how can I fix this?
Bill G...

This will not work inside of the bc4juix:table, this tag pulls the data from the data source, it doesn't allow you to add ShowValue tags inside of the table. Take alook at the UIX Developer Guide for more information on the Table tag. The ShowValue tag can be used in a uix hierarchy outside of the tabel tag.

Jabber voice mail for some users.

Dears,
J4W voicemail works perfect with default config.xml file for some of the users and for some of the users it shows the attached when clicked on voicemail tab. I have create 2 no's of sevice profile, the voice mail credential set for both service profile is Unified CM IM and presence.
I can understand the prompt as it is asking for voicemail password for that reason i have to create a custom config.xml file and i have to upload in TFTP server, But my concern is why it is working for some of the users without config.xml file and for some users it is prompting for username and password.
Thanks

Dears,
the profile are different, but if i put the the other users working profile also it is not working.
The voice mail server is showing not connected in jabber,
Any hints.
Thanks

Difference in Trial Balance & Legder report because Zeero opening balance appearing in Trial balance for some accounts

Hi Experts,
When I am generating System trial balance report, it shows null in opening balance column for some of accounts while ledger for respective accounts are showing correct figure of opening balance.
And because of this my trial balance showing wrong figures
Also, I have checked it through query report, it showing same opening balance figure as ledger report.
(Attachment for trial Bal, Ledger & Query reports for one of the account are attached here)
I have checked all selection criteria in Trial balance report, but nothing is working.
Please suggest me any solution for for above issue.
regards,
Raviraj

Hi Raviraj
Can you confirm In Trail Balance Opening balance for the Period is OB Starts from Company Activity.
With Regards
Balaji Sampath

Delete all files in a directory not working for some files

I have a requirement like wants to delete all the files in a directory. (These files got generated through some other program.)
Problem is file.delete() is returning false for some of the files..
(donno the reason .. could be bcoz of file closing issues/locking issues.)
Looking for a solution where i can delete a file forcefully irrespective of whether the file is opened or not.
Thanks
Srini

are you on windows? if so, it's almost impossible to delete something another process has open.

LMS4.1 how to suppress operationallydown events for some interfaces

Hi,
Installed Cisco Prime LMS last week. Everthing seems to be running fine. We configured LMS to send e-mail for certain events. One of them is operationallydown/up events. There are some devices for which we only want to see those events for some of the interfaces. For example: there is a device with several ISDN interfaces. Those are used by business partners to dial-in. We expect those interfaces to go up and down several times per day. We don't want any events/e-mails for that. I can't seem to figure out how to configure that. If anyone can help me with that, it would be greatly appreciated.
We come from LMS2.6, but didn't do an upgrade. It's a big leap, everything works different now.
Regards,
Arjan Hummel

Operation down events a usually due to admin up, line protocol down interfaces. The only way to fix that is to put the interface admin down
When you talk about BRI or PRI channels its a different story
Look at NMSROOT/objects/smarts/conf/discovery/tpmgr-param.conf.
Add a line like this, but with the sysobjectid of your device.
IFDescrPattern-.1.3.6.1.4.1.9.1.1045 ~*Bearer*
Something like this should work, but you need to rediscover the device.
Cheers,
Michel

Wireless mighty mouse horiz. scroll for some software

The horizontal scroll on my new wireless mighty mouse seems to work for some programs (Safari) just fine; for others (Melody maker) only on the scrollbar and for others (MS Word) not at all. Any ideas?
Powermac G4 Mac OS X (10.4.8)

Yes you need to install the software to allow your Mac to properly recognise all the features of the BT Mighty Mouse.
I've got the exact same setup and just obtained a Wireless Mighty Mouse - all I had to do was install the software on the CD, reboot (the first reboot will take a little while), and follow the instructions on either the CD or one of the small enclosed booklets that you should have in your box.

Fix For The Plugin Tab Popping Up.

This is a possible fix for some users. It worked for me when the about:config option did not stop the popup.
Check your plug-ins for one called Metastream. If it's there you can just disable it and the problem will go away.
If you want to remove it, you have a couple of options.
First look for a program called Viewpoint Player. You may have had this years ago (mine was 2004), and uninstalled it already. The files are still active.
Look for it in the add / remove programs area first. If it's there, uninstall it. This program was not listed on my system.
If it's not there, the goto (in XP), Program Files\Viewpoint and delete everything in that folder, then delete the folder.
If the plugin still is present, goto Program Files\Firefox\plugins and delete the 2 files with viewpoint in their names.
This should clean up the flag that makes your Firefox start the plugin tab.
Hope this helps a few people out there.
If this help you, please reply to keep it at the top of the page so others will see it.
- TechOwl -

bump to top

Lately my iphone 5 is going nuts for some reason. siri pops up for no reason

Similar Messages

Maybe you are looking for