Latency setting for garageband on iPad

I tried using iRig HD, Garageband, iPad 4 and Airplay/Apple TV to output guitar to Home theatre.
As per usual with Apple things It worked and sounded fine, except there was too much latency
Is there a setting for latency in the iPad version of Garageband?

A little hunting suggests that, at this stage, GarageBand only supports midi in, but not midi out. However other apps are available to act as external midi drivers.
tt2

Similar Messages

Please help download complete content set for garageband

I just bought a new iMac (the one without a cd drive!) and I'm trying to download the complete content set for garageband but nothing is working. I can't do anything in the app store and there are no updates to be found. please help!

Flying Toad wrote:
After downloading the '09 version from Apple for free I ran into an error when attempting to install it on my computer. It says "This update does not need to be installed. A newer version of Garageband is already installed."
the problem is that you didn't D/L GBv5 ('09), you D/Led the update for version 5 to v5.1, not the entire v5 installation.
you'd need to either restore GBv5 from a backup, or buy a copy of GBv5 (or v6) from someplace like eBay or Amazon (it's not available for free from Apple)

Trying to find lowest latency setting for FMS 3.0 live streaming app

Hi,
I work for a technology company in the agricultural industry,
and we recently bought Adobe FMS 3.0 for live streaming of an
online auction application. Initially the tests were ok, but the
stream latency is becoming a real issue. It starts at around 1s
delay, which is barely acceptable, but an hour into the sale it
stretches to 2-3s, and more. This is becoming a real deal breaker
for the Flash solution that looked very promising at the beginning.
We need to find the absolute lowest latency setting for the
live streaming application supplied with FMS3.0.
Low latency (1s max) and stable latency has highest priority,
more important than picture quality or uninterrupted streaming.
How can we achieve this? Are there any settings where I can
tweak the stream latency?
I am not a Flash expert, but I can find and modify the
configuration files on the FMS Windows 2003 server.
Any help would be immensely appreciated.

On server side:
FMS installs itself with default configurations optimized for
Max CPU efficiency. Reducing/shutting-off FMS publisher queues
using Application.xml config should help in removing the delay that
you experienced.
<Application>
<StreamManager>
<Live>
<Queue enabled="true">
</Queue>
</Live>
</StreamManager>
</Application>
Changing default setting to <Queue enabled="false">
disables live publisher queues & aggregate messages ad
therefore "the delay". (the delay should be reduced to <100 ms
for a perfect kind of network or LAN)
--> On client side: Do NOT use NetStream.setBufferTime API
at all ! i.e. do not set any buffer on client side.; Flash player
(upto 10, the current version) would try its best to keep the
buffer around 0.1 seconds, which is the default value.
OmicronPersei8,
Which publisher are you using to publish the live stream?
Sometimes , it is possible that a some fault at stream publisher
may make buffer at flash player grow.
I hope this would help !

When will it be possible to plug in a bass guitar for garageband on iPad and mac?

I've been wondering for some time now when it will be possible for me to plug in my bass guitar in to my macbook pro or my ipad and have garageband support bass guitar. Not everyone plays guitars and pianos. It'll be nice to have more instruments to play with.

When a developer or several find the time to fix it. You can keep an eye on https://bugzilla.mozilla.org/show_bug.cgi?id=472448 and https://bugzilla.mozilla.org/show_bug.cgi?id=431076 for current status.

What does "Restore" setting for Pages on iPad 2 do?

On iPad 2 the Settings app has a submenu for Pages.In it is an ON/OFF setting labelled "Restore". I hoped it would reset the Getting Started document back to its original state after using it for experimentation, but it doesn't seem to! What does it do?

I also have the same question as it relates to the iPod and Numbers and Pages.
Steve H

What is the square setting for on the IPad camera?

What is this new setting on the camera used for?

Use the square setting when you want to take a square photo instead of a rectangular photo.

Best Handbrake setting for BOTH iPod & iPad?

I used the Apple TV setting in Handbrake and vids will not sync to the iPod (they will sync to the ipad).
I then used the "Convert to iPod" setting in iTunes to get vids to my iPod.
So, I'm converting twice (and Handbrake already takes like 10hrs to do 1 DVD)
What setting in Handbrake will give me good video I can use on both iPad & iPod without sacrificing too much quality?
Thanks!

"Universal" sounds good. But, will I then have to convert it in iTunes or just drop it in iTunes and then sync it directly to my devices?
I hate having to do a 2nd "convert" using iTunes after seeing "Some of the items did not sync....".

Exporting midi in realtime for garageband on ipad to Mac desktop?!

I'd like to send midi from my IPAD 2 via the Alesis IO-DOCK to logic on my mac. Yes I want to be playing real time midi info in garageband and sending it via the DOCK to logic on a track Possible?

A little hunting suggests that, at this stage, GarageBand only supports midi in, but not midi out. However other apps are available to act as external midi drivers.
tt2

When I try to reset my iPad mini it keeps asking for a passcode! have tried restoring, connecting to iTunes and looked for the 'set up as new iPad' notification, but nothing is working? can anyone help please?

I know my passcode is correct but when I try to reset my iPad mini it keeps asking for a passcode! have tried restoring, connecting to iTunes and looked for the 'set up as new iPad' notification, but nothing is working? can anyone help please?

If the iPad was running iOS 7, iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

HT1218 I'm trying to set up a new iPad..it asks for my WiFi network.. I find the network..then it asks for information that I have no idea about: IP address, Subnet Mask, Routet, DNS, Search Domains, Client ID..also the headings are: DHCP,BootP, Static..c

I am trying to set up my new iPad. it asks for a WiFi connection.. I have one..then the next page asks for these things:DHCP,BootP,Ststic then IP address, Subnet Mask, Router, DNS, Search Domain, Client ID then HTTP Proxy I have no idea what any of this means...can someone please help me???

Thank you sooo much. I was so disappointed...I couldn't wait to get started with the new iPad..then ran into the problem. So simple. You made my day. Thank you for your expertise!!

How can i set up multiple user accounts for my new ipad mini?

How can i set up multiple user accounts for my new ipad mini?

The iPad mini is basically a one user device. There are no Accounts. You can set up restrictions so that only you can do certain things.

Can I set up multiple users for garageband?

I have been asked to take over creating the podcast for my church. Under preferences for Garageband I had "My Info" in place for my personal podcasts I did, so that the information weas already in place when I export to iTunes.
Will I have to update this with the church's information every week, then set it back to my info when I create a new person podcast? Maybe there is a better (more efficient) way to get the information in for both podcasts?

To have separate accounts for each client would be by far the simplest solution, but if you do not want to have too many accounts, how about creating an Automator Service to set the info for each of your clients? Then you can set the tags after exporting the podcast to iTunes from the "Services" menu in the iTunes menu.
A sample Automator service might look like this:
Launch Automator.
Select to create a new service.
Set it to receive text in iTunes.
Type iTunes into the search field.
Drag an "Get selected iTunes items" action to the workflow. Set this action to "Get selected tracks"
Drag an "Set Info of iTunes Song" action to the workflow. Enter the details of your client.
Save the service. This will install it in your library.
To use the service, select a podcast in iTunes and press the "Run" button in your service or call it from the "iTunes > Services" menu. Running the service will write the info to your podcast. Define one service for each of your clients.
Regards
Léonie

I've got an iPad and iPhone 4S, both of which are set up for facetime. When someone calls me, both the iPad and phone ring, even though the phone is set to receive facetime calls on the number and the iPad is set for an email account. why is this?

I've got an iPad and iPhone 4S, both of which are set up for facetime. When someone calls me, both the iPad and phone ring, even though the phone is set to receive facetime calls on the number and the iPad is set for an email account.
How can I change the setup so on the email only the iPad rings and on the phone number only the phone rings?

No it's not stealing. They have an allowance that you can share with so many computers/devices. You'll have to authorize her computer to play/use anything bought on your acct. You can do this under the Store menu at top when iTunes is open on her computer.
As far as getting it all on her computer....I think but I am not sure (because I don't use the feature) but I think if you turn on Home Sharing in iTunes it may copy the music to her computer. I don't know maybe it just streams it. If nothing else you can sign into your acct on her computer and download it all to her computer from the cloud. Not sure exactly how to go about that, I haven't had to do that yet. I wonder if once you authorize her computer and then set it up for automatic downloads (under Edit>Preferences>Store) if everything would download. Sorry I'm not much help on that.

Has anyone used reMIDI as a plug-in for GarageBand. I downloaded a trial version of reMIDI, which enables MIDI instruments to be strummed or arpegiated, but can't get it to work in Garageband. How do I set it up?

Has anyone used reMIDI as a plug-in for Garageband ('08)? The program allows MIDI instruments to be strummed or arpegiated. I have a trial version, but can't get it to work in Garageband. Wonder how to set it up.
Thanks, Doctor Mark

Port Forwarding.....or Port Mapping....as Apple calls it is a difficult and complex configuration method for most users. Because there are so many variables involved in this type of setup, it is not possible to provide a step by step guide that will work for everyone with all devices.
It is possible that a setup guide exists for the the WD drive and AirPort Extreme, but you will have to go looking for it on the Internet. Even if you find one, it may not be tailored to your specific situation or needs.
Sometimes, you can do everything right....at least according to someone's article or "how to" guide, and things still will not work correctly.
In situations like this, when you really don't know what to do, you need to enlist the aid of an IT pro, who will know what to do based on your particular products and unique circumstances. Sometimes....they won't be able to get things working either due to particular circumstances.
But, before you do this, I would strongly recommend that you use a Static IP address for your Internet connection with your ISP. If you do not have this now, contact them to ask them if they offer this type of connection. Expect to pay more for this type of service, of course.

I'm setting up my new ipad air and it's asking for id and password, but not accepting it. help me

i'm setting up my new ipad air and it's asking for id and password, but not accepting it. help me

If it is asking for an APlle ID password for an ID you do not recognize then you have stumbled upon the Activation Lock feature of IOS7.
Read more about it here:
http://support.apple.com/kb/HT5818

Latency setting for garageband on iPad

Similar Messages

Maybe you are looking for