Latency: This Shouldn't Be Happening.
I'm running Reason into Logic via Rewire; I open an external midi track and assign it to my Reason Hardware Interface, then open an aux track in the mixer with the input being reason l/r and the out being main out 1/2. I get sound out of reason, but it is latent. This should NOT be happening. The samples and the refill for Reason are on the home drive, as is the logic project, so it's not a disk problem. I have 2GB of ram. And it has nothing to do with my interface; that's simply playback at this point. ANY suggestions!?
Yep, Stu's right. In the screenshot below, it is the top two options of the last four.
In "Rewire behaviour", "Live mode" should bring less latency. A large process buffer range also comes with more latency, so set that as low as possible too. And of course the coreaudio buffer itself.
regards, Erik.
Similar Messages
-
I added apps by syncing with a Mac. It was under my husband's ACCT. When I tried to update apps on my iPad, it was his account. How do I change this? It only happens when I try to update apps
Apps will always be tied to the account from which they were purchased.
If they were purchased from your husbands account, then they will have to update using that account. -
I have an iphone 4 and it will not boot. I've done everything except downgrade the firmware to 6.1.3 or 6.1.4... is this what needs to happen and if so can I please get a link to do so? thanks
Hi JACOBfromINSIDEaLION,
If you are unable to get your iPhone to restore, you will want to perform a restore from recovery mode, as explained in the following article:
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden -
Tried to restore my ipod I just wanted to back to factory setting and delete everything on it. I did it and NOW everything is erased, gone, and stuck on the apple logo. Populated that it is in recovery mode and needs to be restored. Clicked on restored and error (1) came up. So now I have a useless iPod that I purchased. Big apple user minus my laptop. 2 iPod, 2 iShuffles, iPad, 4 iPhones, iMac 27 inch. If this isn't rectified I will never buy and continue to push my consumers, family, and friends on my bad experience with apple. iTunes is up to date and now I am concerned that if do anything to my phone this same problem will happen.
Marc Rastovic
<Personal Information Edited By Host>Hello, Marc.
Thank you for visiting Apple Support Communities.
Error 1 or -1 can be very tricky to resolve and sometimes leads to a device needing service. That being said, here are the steps I would go through first for this specific error.
Check for hardware issues
Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/TS3694
If the iPod is still unable to be restored it may needs to be serviced. The following link should help you get started with the process and has links with additional information on topics such as warranty and service pricing, battery replacement, and express replacement service. This link will also allow give you the option to contact Apple Support for possible additional troubleshooting steps and options.
Service Answer Center - iPod
Cheers,
Jason H. -
When I try to use the internal hard drive as a scratch disk I get this error "unable to set scratch disk- the selected directory is on write protect or non-writable media. Any ideas on how to fix this. It only happens in fcp.
By internal, I assume you're referring to your systems (boot) drive. Is it, by chance, a partitioned dive?
Also…although many people successfully use their systems drives as scratch disks, over time you'll have better results using a dedicated drive for your media.
Good luck.
Russ -
I have recently got a new replacement iPhone 4. Since I got this I have found that my data allowance is getting used up during the night while my phone is charging on the bedside table. How an I find out what is causing this and stop it happening? Some nights the usage is 150 meg!
You can not access the backup directly.
Did you restore your replacement from this backup?
If so then you already have everything in the backup on your device.
If not, you can wipe the device and restore from this backup:
Settings > General > Reset > Erase All Content & Settings
What is it you are worried about losing that isn't already on your current device? -
i received an error message "iTunes requires 64-bit mode" says to go into my iTunes application and 'uncheck' the 'open in 32-bit mode' checkbox - i went into the application and the box was not checked anyway so why am i getting this prompt? Never happened before. yesterday did the sofware update for maverick.
Thank you for your response, Chris. But I'm afraid I have to disagree. There are native 64 bit versions of iTunes available for OSX and Windows.
In a 64 Bit Windows environment native 64 Bit Applications install the DLL's in a directory called "Program Files" and a directory called "Program Files (x86)" (32 Bit applications only use the ladder).
iTunes 9 is consistent with this behavior - and it identified itself to the system as a 64 bit application (meaning it's process appears without a "*32" tag on it). -
I have noticed recently that deleted e mail messages do not disappear from the screen. Instead they turn grey until I switch to another mailbox. When I return, they are gone. Any idea why this has started to happen?
I have noticed recently that deleted e mail messages do not disappear from the screen. Instead they turn grey until I switch to another mailbox. When I return, they are gone. Any idea why this has started to happen?
-
Photos from the Internet will not load correctly. I get white boxes with blue question marks inside. This has only been happening for the past 3 weeks so I'm not sure why it is happening.
Yes - email & text work fine but when I use something like Google Images or search a blog with imbedded photos I get the empty white boxes with question marks. If I click the question mark it opens the photo but I can't possibly do that for EVERY image on EVERY page I search!?!?! I've rebooted the iPad & my wireless card several times but neither action helped. Have any clue what I should do now?
-
1st - itunes downloaded to my ipod albums that are all fractured, compilation albums are seperated.This should not have happened but itunes felt it knew better. I do not like it.
2nd - While trying to fix it, itunes made all albums and artists unknown
3rd - While trying to get an answer I am unable to contact anyone or even send an email requesting an answer.
4th - While trying to use the "fast lane" i ran into trying to find the product S/N, I went to my account and it was not there. I tried to see it on the back of the Ipod but had to find a magnifying glass to even read it.
5th -- The we will get back to you really ****** me off
6th -- I have wasted 2 hours to fix something that should not have happened and the situation is worse than when i started
7Th --- Itunes management of songs is terrible and there are NO instructions and even worse no support
8th ---- Apple is going down the toilet because the products are good, not great, and the itunes instructions are non existent
9th --- to even suggest i pay for product support is insulting and a sign that apple is desperate
10th -The suggestion for online feedback is this; BE ON-LINE SUPPORT, NOT WHATEVER YOU CONSIDER IT TO BE NOW.I agree with stevejobsfan - (0123).
However, if what you actually want to do is to fix/sort out your problem, why no try posting a question on that subject?
For starters - you can re-name the tracks in your iTunes library, so it is possible to correct the changes that you must have made that mean that songs are now "unknown artists and albums." -
I want to get rid of a book in the iBooks "Purchased" collection, but when I touch the Edit button and select the book and then touch the Delete button, then the "Delete this copy" seletion, nothing happens. How do I delete the book from the collection?
The Cloud by the song indicates that is is an iTunes purchase but it is not downloaded on the iPod. If you only want download iTunes purchases to show in the Music app go to Settings>itunes and pp Store and turn off Show aLL.
-
safari will not quit. this seems to be happening a lot lately. any idea why or what i can do to repair this?
Ok Chris..
Might be a good time to run Disk Utility in case the startup disk needs repairng.
Launch Disk Utility located in /Applications/Utilities
Select the startup disk on the left then click First Aid.
Click: Verify Disk (not Verify Disk Permissions)
If DU reports errors, click Repair Disk -
I am trying to complete the iOS7 update and it stalls on the updating of the iCloud settings, if I skip this step what will happen?
Same issue here....somebody help?
-
Why does my router disconnect every time I sleep the computer? Why did this only start to happen recently?
Actually it does with Ethernet too: http://support.apple.com/kb/HT2412?viewlocale=en_US&locale=en_US
What happens when the Mac goes to sleep (not just into idle mode or display sleep)?
On all Macs:
The microprocessor goes into a low-power mode
Video output is turned off, and a connected display may turn off or enter its own idle state
Apple-supplied hard disks spin down; third-party hard disks may spin down
On portable Macs:
The Ethernet port turns off, if applicable (see note below)
Expansion card slots turn off
The built-in modem, if present, turns off (see note below)
An AirPort card, if present, turns off (see note below)
The USB ports only responds to the power key on an external keyboard (see below)
The optical media drive, if present, spins down
Audio input and output turns off
Keyboard illumination, if a feature of your portable computer, turns off
But see the note about selecting, "Wake For Network Access" in Energy Saver preferences.
Note: Portable computers have no network connectivity when in sleep mode, but can wake if the Energy Saver option "Wake for network access" is enabled. If you wish to use file sharing or don't want to interrupt your Internet connection, you should not manually put the computer to sleep, and you should drag the "Computer sleep" slider to Never. -
When trying to logout, I keep getting "the application safari canceled logout" even though I am not in Safari. This only recently started happening and I'm wondering if it is a setting issue or bug. Can someone tell me what to do?
You don't have to be "in" Safari for it to cancel logout.
You have several different Applications open, and any one of them may cancel logout if conditions are just right.
Quit the Applications you are no longer using and your Mac will run better and faster. And it will logout instead of cancelling.
Maybe you are looking for
-
SanDisk eject error message and improper upload of pictures Aperture 3
My Macbook Pro seems to corrupt or damage SanDisks. I just uploaded a 16 GB disk which only uploaded about 30 out of 400 pictures into Aperture 3. It was a new disk. At first it showed all the pictures and looked as if it downloaded. When I ejecte
-
HOW TO EXECUTE ABAP SERVER PROXY?
Hi, I am working on a scenario in which message is passed from Integration Server to ABAP server proxy. In case of client proxy we execute EXECUTE_SYNCHRONOUS methjod of proxy,but I am bit confused in case of server proxies. How do we execute server
-
Hello, Brand new to MacBook---while initially setting up, I created myself as a User, but I now I would like to create a User for my daughter and husband. How do I do this? thanks so much
-
Oracle Applications Development
Hello Oracle folks: I am looking for a sharp Oracle Applications Developer. Please put your feelers out there---great opportunity for an exceptional candidate. Please contact: Gina 617-426-9700 ext. 24
-
CMS Assembly Error -- but building in CBS succeeds.
After recently upgrading to SP12 we are having some assembly errors in CMS. The log for the assembly error is as follows: Info:Starting Step Check-assembly at 2005-06-21 09:42:32.0127 -4:00 Fatal:Contact CBS administrator: Nonempty list of broken DC