Latency Type & Changing it
Hi all...
Just a quick question about interleaving & FastPath, or whatever it's called.
When I first took out my option 3 broadband, I was getting a stable 6.5-7mb -- actually what I was told I'd get when I signed up, which is obviously great -- however two or three weeks later I've been getting a lot of disconnections in online games and ping-spikes.
I've looked around various forums and this one and read a few of other peoples' problems and the suggestions -- off the top of my head; disabling 'N' wireless function, changing channel pref. 11-13, make sure FON is disabled, change to WEP from WPA2, and the list goes on -- but haven't really got anywhere. However, I've just stumbled across a thread on Hexus.net, a hardware/computing review-type-site, about FastPath and how it could decrease latency due to certain error checking being disabled and that, should you wish to have interleaving disabled and, thus, it enabled, phone BT...
Line stats according to my HH2 Type-A:
Ignore the connection time, was testing channel 12 and it seems my NIC doesn't like it so had to reset to defaults Prior to that, my line had been up for over 2 days... Any way, am I right in thinking that interleaving is indeed disabled on my line? If so, is it just a matter of phoning BT and asking them to re-enable and in however many days it'll take, it'll be back to 'normal'...? Thing is, I didn't ask for it to be changed in the first place and oh, before I forget, on a side note, FON seems to randomly enable itself, or at least has twice since I've had this broadband; not sure how it disabled the first time but it was on prior to my reset-to-defaults earlier this evening...
Just for kicks:
Download speedachieved during the test was - 2954 Kbps
For your connection, the acceptable range of speeds is 600-7150 Kbps.
Additional Information:
Your DSL Connection Rate :8128 Kbps(DOWN-STREAM), 448 Kbps(UP-STREAM)
IP Profile for your line is - 7150 Kbps
Cheers all
EDIT: Only noticed a real problem since last Sunday where my HH updated it's firmware, though, looking at the HH pages now, it seems to have updated again today
Well, it might be wise of me to leave it a few days to see if how it is now (yeah off peak & all) continues... That would be nice... Otherwise, I'll cry for a mod to come along
Hope you get your way... They can't refuse to disable it, surely?
EDIT: Just for fun, as it's off peak, I thought I'd get something to compare the above result with -- gg, BT... gg:
Download speedachieved during the test was - 6663 Kbps
For your connection, the acceptable range of speeds is 600-7150 Kbps.
Additional Information:
Your DSL Connection Rate :8128 Kbps(DOWN-STREAM), 448 Kbps(UP-STREAM)
IP Profile for your line is - 7150 Kbps
Similar Messages
-
Latency type change (Slow speeds)
Hi there,
I would like to request to have my Latency Type changed to Fast Path please, I understand the mods are able to help with this - here are my HH4 stats if they're needed?
Thanks in advance
1. Product name:
BT Home Hub
2. Serial number:
+068340+NQ31922187
3. Firmware version:
Software version 4.7.5.1.83.8.130.1.17 (Type A) Last updated 03/05/14
4. Board version:
BT Hub 4A
5. ADSL uptime:
0 days, 00:18:20
6. Bandwidth:
1163 / 6648
7. Data sent/received:
0.3 MB / 0.5 MB
8. Broadband username:
[email protected]
9. BT FON:
Yes
10. 2.4 GHz Wireless network/SSID:
BTHub4-ZFGN
11. 2.4 GHz Wireless connections:
Enabled (802.11 b/g/n (Recommended)) 20 MHz, WPS enabled
12. 2.4 GHz Wireless security:
WPA and WPA2
13. 2.4 GHz Wireless channel:
Automatic / 6
14. 5 GHz Wireless network/SSID:
BTHub4-ZFGN
15. 5 GHz Wireless connections:
Enabled (802.11 n 40 MHz (Recommended)) 20/40 MHz, WPS enabled
16. 5 GHz Wireless security:
WPA2
17. 5 GHz Wireless channel:
Automatic / 40
18. Firewall:
Default
19. MAC Address:
cc:33:bb:1a:67:e4
20. VPI/VCI:
0 / 38
21. Modulation:
G.992.5 Annex A
22. Latency type:
Interleaved
23. Software variant:
24. Boot loader:can you go to troubleshooting then logs/wan and post the 2 lines of stats which would be very recent look something like this
17:36:06, 23 Feb.
(580656.970000) DSL noise margin: 6.00 dB upstream, 9.70 dB downstream
17:36:05, 23 Feb.
(580656.900000) DSL line rate: 352 Kbps upstream, 928 Kbps downstream
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’. -
Latency Type Change Request - Interleaved to Fast ...
Hey there I would like to request to have my Latency Type changed to Fast Path for better gaming experience
here is my HH4 stats:
Thanks
Darren
1. Product name:
BT Home Hub
2. Serial number:
+068343+NQ41704711
3. Firmware version:
Software version 4.7.5.1.83.8.173.1.6 (Type A) Last updated Unknown
4. Board version:
BT Hub 5A
5. WAN:
PPP Connected
6. Data sent/received:
1.0 GB / 1.5 GB
7. Broadband username:
[email protected]
8. BT Wi-fi:
No
9. 2.4 GHz Wireless network/SSID:
BTHub5-KP2X
10. 2.4 GHz Wireless connections:
Enabled (802.11 b/g/n (up to 150 Mb/s)) 20 MHz, WPS enabled
11. 2.4 GHz Wireless security:
WPA2
12. 2.4 GHz Wireless channel:
Automatic (Smart Wireless)
13. 2.4 GHz Wireless network/SSID:
14. 2.4 GHz Wireless connections:
Disabled
15. 2.4 GHz Wireless security:
None
16. 2.4 GHz Wireless channel:
Automatic (Smart Wireless)
17. 2.4 GHz Wireless network/SSID:
BTWifi-with-FON
18. 2.4 GHz Wireless connections:
Disabled
19. 2.4 GHz Wireless security:
None
20. 2.4 GHz Wireless channel:
Automatic (Smart Wireless)
21. 2.4 GHz Wireless network/SSID:
Auto-BTWiFi
22. 2.4 GHz Wireless connections:
Disabled
23. 2.4 GHz Wireless security:
None
24. 2.4 GHz Wireless channel:
Automatic (Smart Wireless)
25. 2.4 GHz Wireless network/SSID:
26. 2.4 GHz Wireless connections:
Disabled
27. 2.4 GHz Wireless security:
None
28. 2.4 GHz Wireless channel:
Automatic (Smart Wireless)
29. 5 GHz Wireless network/SSID:
BTHub5-KP2X
30. 5 GHz Wireless connections:
Enabled (802.11 a/n/ac (up to 1300 Mb/s)) 80 MHz, WPS enabled
31. 5 GHz Wireless security:
WPA2
32. 5 GHz Wireless channel:
Automatic (Smart Wireless)
33. 5 GHz Wireless network/SSID:
34. 5 GHz Wireless connections:
Disabled
35. 5 GHz Wireless security:
None
36. 5 GHz Wireless channel:
Automatic (Smart Wireless)
37. 5 GHz Wireless network/SSID:
BTWifi-with-FON
38. 5 GHz Wireless connections:
Disabled
39. 5 GHz Wireless security:
None
40. 5 GHz Wireless channel:
Automatic (Smart Wireless)
41. 5 GHz Wireless network/SSID:
Auto-BTWiFi
42. 5 GHz Wireless connections:
Disabled
43. 5 GHz Wireless security:
None
44. 5 GHz Wireless channel:
Automatic (Smart Wireless)
45. 5 GHz Wireless network/SSID:
46. 5 GHz Wireless connections:
Disabled
47. 5 GHz Wireless security:
None
48. 5 GHz Wireless channel:
Automatic (Smart Wireless)
49. Firewall:
Disabled
50. MAC Address:
40:f2:01:16:3a:d2
51. Software variant:
52. Boot loader:What device does the Homehub5 plug into on the WAN side?
Some sort of modem?
If you found this post helpful, please click on the star on the left
If not, I'll try again -
Latency type changed back to Fast path
I recently had my latency type changed back to interleaving however i now get daily disconnections (usualy when recieving a phone call) and my download speed isnt any better, the only difference is an increased latency of around 10-20ms so i would like to have it reverted back to fast path.
Thanks, Rob.Hi backie,
If you fill out the contact form located in the about me section of my profile again we can look at this for you.
Cheers,
Chris
BT Mod Team
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’. -
Latency type changed from fast to interleaved
My Latency type as changed from Fast to Interleaved, why?
From - Latency type: Fast
To - Latency type: Interleaved
Can it be changed back to fast ?
Since it as changed, it feels like my broadband is now being capped. It as become slow .5mb when usually I was getting 1.9mb.
ADSL Line Status
Connection information
Line state: Connected
Connection time: 3 days, 11:47:08
Downstream: 19,661 Kbps
Upstream: 1,164 Kbps
ADSL settings
VPI/VCI: 0/38
Type: PPPoA
Modulation: G.992.5 Annex A
Latency type: Interleaved
Noise margin (Down/Up): 2.6 dB / 6.2 dB
Line attenuation (Dwn/Up): 22.0 dB / 10.9 dB
Output power (Dwn/Up): 0.0 dBm / 12.3 dBm
FEC Events (Down/Up): 117943179 / 717
CRC Events (Down/Up): 220069 / 238
When using Facetime,the conversations on the devices have become very broken!!
Thank you
Solved!
Go to Solution.I did a quiet line test and the result was Ok, no noise on the line.
Here are my stats including the hidden errors:
ADSL Line Status 08:43 on the 13/03/2013
Connection information
Line state:
Connected
Connection time:
0 day, 19:38:32
Downstream:
19,075 Kbps
Upstream:
1,197 Kbps
ADSL settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.5 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
3.4 dB / 5.9 dB
Line attenuation (Down/Up):
22.0 dB / 11.0 dB
Output power (Down/Up):
0.0 dBm / 12.7 dBm
FEC Events (Down/Up):
18336078 / 133
CRC Events (Down/Up):
78366 / 37
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
Loss of Link (Remote):
0
HEC Errors (Down/Up):
10689528 / 29
Error Seconds (Local/Remote):
0 / 17 -
Hi Folks thanks for reading. I have tried to ring the BT brioadband help line but found it very difficult to comunicate what I want to happen. As an Avid gamer I would like to change my lattency type to Fast please see me connection Details Below
1. Product name:
BT Home Hub
2. Serial number:
+068340+NQ31921469
3. Firmware version:
Software version 4.7.5.1.83.8.130.1.17 (Type A) Last updated 11/09/14
4. Board version:
BT Hub 4A
5. ADSL uptime:
5 days, 19:48:17
6. Bandwidth:
448 / 8128
7. Data sent/received:
493.5 MB / 214.1 MB
8. Broadband username:
[email protected]
9. BT FON:
No
10. 2.4 GHz Wireless network/SSID:
BTHub4-NTW5
11. 2.4 GHz Wireless connections:
Disabled
12. 2.4 GHz Wireless security:
WPA and WPA2
13. 2.4 GHz Wireless channel:
6
14. 5 GHz Wireless network/SSID:
BTHub4-NTW5
15. 5 GHz Wireless connections:
Disabled
16. 5 GHz Wireless security:
WPA2
17. 5 GHz Wireless channel:
Automatic / 0
18. Firewall:
Default
19. MAC Address:
cc:33:bb:1a:35:68
20. VPI/VCI:
0 / 38
21. Modulation:
G.992.1 Annex A
22. Latency type:
Interleaved
23. Software variant:
24. Boot loader:
Thanks
BenandGHi BenandG
Welcome to the forum and thanks for posting. Please use the 'contact the mods' link in my forum profile to send in your details and we'll be happy to help. You can find the link by clicking on my username.
Thanks
Neil
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’. -
Changing latency type to fastpath
I would like to have my latency type changed from interleaving to fastpath I have asked previously via live chat and they didnt end up changing it for me, thanks.
Solved!
Go to Solution.You would need to provide connection information here, and get advice from forum members before anything could be done.
What are your ADSL Statistics and BT Speedtester results please?
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones. -
Hi,
apologies if the following query is a dumb one, but I am ignorant when it comes to this stuff
our broadband is used by one pc hard connected to the home hub and 2 laptops wirelessly. The pc is used for warcraft and the laptops for bbc iplayer streams etc.
My question is, would having my latency type changed to fast from interleaved enhance/improve the performance of the pc/laptops when gaming and or streaming?
Current ADSL info is:
Connection Information
Line state
Connected
Connection time
0 days, 00:55:22
Downstream
12,954 Kbps
Upstream
1,108 Kbps
ADSL Settings
VPI/VCI
0/38
Type
PPPoA
Modulation
G.992.5 Annex A
Latency type
Interleaved
Noise margin (Down/Up)
3.8 dB / 6.2 dB
Line attenuation (Down/Up)
33.6 dB / 15.4 dB
Output power (Down/Up)
20.4 dBm / 1.6 dBm
Loss of Framing (Local/Remote)
0 / 0
Loss of Signal (Local/Remote)
0 / 0
Loss of Power (Local/Remote)
0 / 0
FEC Errors (Down/Up)
690 / 0
CRC Errors (Down/Up)
29 / 0
HEC Errors (Down/Up)
459 / 0
Error Seconds (Local/Remote)
17 / 0No, changing the latency to fast could introduce a lot of CRC errors, which would slow your connection down.
You need to avoid all wireless connections if you want good streaming performance.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones. -
How to change latency type to fast?
How to change latency type to fast?
ADSL Line Status
Connection information
Line state:
Connected
Connection time:
5 days, 03:08:00
Downstream:
16,403 Kbps
Upstream:
948 Kbps
ADSL settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.5 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
3.1 dB / 4.7 dB
Line attenuation (Down/Up):
30.5 dB / 16.2 dB
Output power (Down/Up):
20.9 dBm / 12.2 dBm
FEC Events (Down/Up):
313987846 / 3701
CRC Events (Down/Up):
2155 / 18271
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
Loss of Link (Remote):
0
HEC Errors (Down/Up):
49173 / 14016
Error Seconds (Local/Remote):
0 / 17361 -
Slow Speed after Latency type has been changed
Hi,
the last few days I have noticed that my broadband speed has gone down hill big time.. according to speedtester.bt.com my DSL connection rate is: 20504kbps (down-stream) and my IP Profile is 18090kbps, but my download speed is 2411kbps which is below the acceptable range for my connection.
I logged onto my BTHH3 and found that my latency type has changed from Interleaved to Fast, I have noticed that my CRC & HEC (down) are much higher than before..
Should I leave it for a few days to see improvment or ask the mods to change the latency type back to Interleaved
Thanks in Advance
Andy
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.5 Annex A
Latency type:
Fast
Noise margin (Down/Up):
3.7 dB / 5.0 dB
Line attenuation (Down/Up):
18.2 dB / 9.4 dB
Output power (Down/Up):
16.4 dBm / 12.7 dBm
FEC Events (Down/Up):
0 / 21224
CRC Events (Down/Up):
102683 / 4252
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
722956 / 10595
Error Seconds (Local/Remote):
2061 / 2095Results from Speedtester.bt.com
Download speedachieved during the test was - 3887 Kbps
For your connection, the acceptable range of speeds is 4000-21000 Kbps.
Additional Information:
Your DSL Connection Rate :20376 Kbps(DOWN-STREAM), 1176 Kbps(UP-STREAM)
IP Profile for your line is - 17976 Kbps
Upload speed achieved during the test was - 917 Kbps
Additional Information:
Upstream Rate IP profile on your line is - 1176 Kbps
I also re-installed my BT HH2 and that connects using Interleaved as to Fast via BT HH3, while my HH2 is connected I get 15.82mbps via speedtest.net but I keep losing my connection - don't think my HH2 likes 3.7 dB (down) noise margin.. but if I re-connect my HH3 I have a steady connection but 1.6 to 2.2mbps via speedtest.net
I think its time to get a new non-bt router/modem....? -
BT Infinity - Changing Latency type
Hello!
I have read a few articles that say that you cant change your latency type from Interleaved to Fast Path with BT Infinity because the modem is in a little white box and not part of the HH.
This is only the case for some people though. I still connect with the telephone wire and not the WAN port. I have always had a brilliant connection (noise wise etc.) and have always hit the theoretic max of my broadband on ADSL2 and now VDSL.
Would I be able to request my latency type be changed to Fast Path (as I assume it isn't that, although you can't tell with modern HH's) as I do not have this seperate modem box?
Thanks,
CraigThat's right, you can't. DLM handles the transition automatically.
If you found this post helpful, please click on the star on the left
If not, I'll try again -
I'd like to change my latency type from Interleavi...
I would like to change my latency type from Interleaving to Fast. How would I go about doing so/who do I contact.
I have checked previous threads, but old links on such threads do not work anymore.
Solved!
Go to Solution.Thanks for the quick reply. Things make more sense now. I read up about the DLM and yes apprently it must have changed it over around the time I had a lot of visitors with their laptops and what not. This is just an educated guess here but a lot of resetting of the router went on during their visits, at least once or twice a day for a while now and it's possible THAT is what made the change of the latency setting.
It may be fine if I just advise everyone to not touch it at all and it will change back in a period of time. But just to check because I do know myself that the line and connection was pretty stable even before all this, with a lot better latency (which is what I want the most). Is it possible to force change it back? Thank you. -
Want to change latency type on my line
Last year I had a new line laid into my home after 3 years of problems with the old one. Earlier this year I opted for the upto 20 Meg speed, my line is outputting around 18.6 which is fine however recently i've been experiencing disruption to my line.
Sometimes the Hub will reset itself, then when it comes on the broadband light flashes yellow for ages whilst the other lights are blue sometimes upto 5 mins will go by, requiring me to reset it manually to achieve a stable blue light & connection.
I've checked my latency type and found its interleaved. My old line was Fast type as I a game alot and I need a fast stable connection. I think it must have been an oversight when they connected my new line at the exchange they forgot to use the same settings, I do have an I-plate installed so its not an interference thing either.
Is there anyway I can get my Latency set to Fast type please?. My download speeds are stable although sometimes erratic so its not a line problem I have just an exchange setting.DC74 wrote:
Right, then clearly theres something not quite right with my line then, shouldn't be taking ages to re-sync after a reset. Is fast latency still better for gamers though?
Depends on your definition of "better for gamers".....
You either have an interleaved connection that affords stability, maintained IP profile, and maximum sync rate, with maybe the addition of roughly 20-40 milliseconds latency to server connections, as a worst case scenario.
Or you have a slightly lower latency connection, with no forward error correction, possible rise in noise margin, resulting in lower sync speeds and associated IP profile and throughput.
A no brainer really .... over to you. -
Changing latency type to interleaved
How could I get that done?
Thanks for assistanceADSL Line Status
Connection information
Line state:
Connected
Connection time:
0 day, 17:13:09
Downstream:
15,892 Kbps
Upstream:
992 Kbps
ADSL settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.5 Annex A
Latency type:
Fast
Noise margin (Down/Up):
6.4 dB / 5.2 dB
Line attenuation (Down/Up):
30.5 dB / 16.3 dB
Output power (Down/Up):
21.0 dBm / 12.1 dBm
FEC Events (Down/Up):
0 / 0
CRC Events (Down/Up):
1690 / 3885
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
Loss of Link (Remote):
0
HEC Errors (Down/Up):
15105 / 3884
Error Seconds (Local/Remote):
0 / 3573 -
How can i get fast latency type?
I need low latency for better gaming. Can anyone help me with changing my latency type plz? Thank you!
My stats:
Line state
Connected
Connection time
0 days, 16:35:57
Downstream
6,848 Kbps
Upstream
448 Kbps
ADSL settings
VPI/VCI
0/38
Type
PPPoA
Modulation
ITU-T G.992.1
Latency type
Interleaved
Noise margin (Down/Up)
6.0 dB / 23.0 dB
Line attenuation (Down/Up)
44.0 dB / 28.0 dB
Output power (Down/Up)
19.8 dBm / 11.9 dBm
Loss of Framing (Local)
0
Loss of Signal (Local)
0
Loss of Power (Local)
0
FEC Errors (Down/Up)
20000044 / 0
CRC Errors (Down/Up)
949 / 2147480000
HEC Errors (Down/Up)
nil / 0
Error Seconds (Local)
448Rottie wrote:
mcpaddy wrote:
since when is a word for the underworld a swear word/profanity
I don't think "underworld" is a swear/profanity, although the four-letter equivilent of "Hades" might be the one which is and perhaps the one you used?
Wonder what BT would make of the BIBLE
If any post helps tick the star box on the left
Just cause Im paranoid dont mean they are not out to get me
Maybe you are looking for
-
SAP CRM Pricing - Tax is not determined sometimes
Hi Experts, we are using BADI: CRM_COND_COM_BADI to maintain to determine the taxes for every kind of possible business case. With the search values added to strucure CRMT_ACS_I_COM we search in condition table CNCCRMPRCUS00002 for the correct tax th
-
Problem in Choose from list.
Hi, As I tried CFL for a user defined form, when I select an item from CFL and it is displaying in the relevant field. And when I save the data it is perfectly saving with the message of "Operation has been completed successfully". But the data is
-
Dear all, i am facing a problem in sales order. i explain the process, if i am creating sales order with reference to quotation will take all item from quotation. there is one condition in pricing procedure ZFR1(excise factor) on this price we calcul
-
How can I get the hardware acceleration in Thunderbird 31 off. ?
Hello I use ZoomText 10 from Ai Squared, and keep getting the message that I need to disable the hardwertacceleration in Thunderbird to work the xfont well. I did this already in Firefox 31. I can disable this nowhere in thunderbird 31. What should I
-
How to get back my old version of Adobe Acrobat
How do I get my old Adobe Acrobat back. It worked great for what little I use it. I was updated to Acrobat XI Pro 11.0.04 and do not need that complex of software for just Creating a PDF file and being able to print a copy when I need it. Now if I