Later jet m1212 nf mfp need to move the font down a little to print on premium forms

I am using pre printed forms and need to re-aling the print (font) down to match the form
Thanks

Then use the features within whatever application (e.g. Word) you are using to set a different top margin value for the document.

Similar Messages

ASA 5505 Failure replaced and need to move the license key?

Can someone point me in the right direction? My ASA 5505 died due to a power surge and I swapped it with a spare. I had Security Plus and a 50 user license and need to move the license keys from the failed ASA 5505 to the new one. I kept both my emails with the activation keys, but not sure how I get this transferred? Thanks in advance.
Joe

I think this is totally unacceptable. For anyone else who uses a 5505 at home and has bought licenses and the hardware out of their own pocket, the idea here should be that you've already bought the hardware and the license. Seems obvious, right?
Yes I can see the license being device specific if not only because that's the way you've designed your licensing activation schema; but if I've just had your product fail and bought another replacement, there should be an understanding or agreement between Cisco and the user that we can reinstate any licenses we've already bought.
Do you really believe it's fair to make someone buy something from you twice, something that they've already bought from you? Do you actually believe that? I believe that the people in the Cisco Licensing department would agree with my viewpoint and I have a pending case with them for this issue right now. I will post my result here.
Make your products last and perhaps I can give credence to your licensing beliefs, until then your products fail and so does your licensing logic.

HT1379 The USB ports on my 30" Cinema are not working. The monitor has not been used for a year or so, and the computer is a Mac Book Pro, 1012 model running OS Mavericks. I need to move the computer between two locations, and the other monitor is a 27"

The USB ports on my 30" Cinema HD display appear to not work. The monitor has not been used for almost a year, when I upgraded to a new Mac Book Pro and the 27" retina display. Now I need to move the computer back and forth between two locations using the two displays. The need for operating USB ports is essential. Any ideas. The display appears entirely normal. Am running OS X 10.9.

Disregard, problem solved.

How do I ungroup the pages in my doc, I need to move the first to the end, and it shows me all the pages are in a group

On Pages: I need to move the first page of my document to the end, and it shows me all the pages are in a group. How do I ungroup the pages in my doc.

Hello there, linafrompereira.
The following portion of the online Pages Help for Mac provides information on grouping items in Pages:
Layer, group, and lock objects - Pages Help for Mac
http://help.apple.com/pages/mac/5.2/#/tan5eab46568
Group and ungroup objects
Shift-click to select multiple objects.
In the Arrange pane of the Format inspector, click Group (or choose Arrange > Group from the Arrange menu at the top of your computer screen).
To ungroup an object, select it, then click Ungroup or choose Arrange > Ungroup.
Tip: You can Control-click objects, then choose Group or Ungroup from the shortcut menu. You can also add these buttons to the toolbar: Group and Ungroup.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Need to "move" the Help|Personalize|Logoff links below masthead

I need to move the links Help/Personalize/Logoff from the masthead to below the masthead. This is what I did:
1. hid the links in the masthead by using the "Show..." properties of the masthead iView
2. created a new iview with the links Help/Persoanlize/Logoff and add it to the framework page under the masthead. This iView is based on the masthead iView source code where I removed the banner and welcome areas.
But when I did that, the logoff functionality stopped working. Do you have any other ideas on how to achieve this without impacting the logoff functionality?
Thanks in advance,
Tiberiu

Hi Tiberiu,
Change the masthed par file for this. It is a simple process deploy the par in to NWDS and change th .jsp file which is structured in HTML table format.
<table>
     <tr>
            <td> </td>
            <td> </td>
     </tr>
<table>
here everything is shown in single row.
just make a new row <tr> </tr>
cut the code responsible for logoff/personalize and paste it in the new row.
(Simply, change it as u like)
deploy it in portal and create and iview for it add it to the Default FrameWork Page at top and make the old masthead disable/remove it.
Try it,
MrChowdary.

Have downloaded a .epub file from a third party publisher to my pc. Publisher advises that iTunes is needed to move the file to my iPad. iTunes installed on both pc and iPad. What's next?

Have downloaded a .epub file from a third party publisher to my pc. Publisher advises that iTunes is needed to move the file to my iPad. iTunes installed on both pc and iPad. What's next?

Drag or copy the file into the Automatically Add to iTunes folder in your library (default location C:\Users\user_name\Music\iTunes\iTunes Media), or add it manually using File > Add File to Library ... If the file is compatible with iTunes it'll be added to your library and can then be synced with your iPad.

Need to Increase the Font Size of a screen field in a Dialog Screen ?

Hi ppl,
I have a requirement wherein i need to increase the font size of one field on a dialog screen .
i was going through the threads and found this which has beautiful example given by vijay
Increase text size in Screen
But I'm facing a problem in implementing it since the value in the field (of which the font size needs to be increased) depends on a nother field filled by user at runtime only.
Can anyone gimme some suggestions or alternative way to solve my problem
Thanks
Sachin Soni

Hi Sachin,
There is not way to change the font style.
But you can add ur own text through icons or graphics.
Create your own graphics or icons and include it in ur module pool.
Or,
Goto the Layout Editor of your Screen.
Double click on the text field .. Double clk the text fild, and from the Botton right u can see an arrow icon -> click on that -> will open a Popup -> in that set Area Title to TRUE.
Hope this solves your problem.
Thanks & Regards,
Tarun Gambhir

Firefox4 on ubuntu, after awhile when I click on bookmarks and then move the cursor down to a bookmark, the list of bookmarks disappears. A stop and start of firefox4 fixes the problem but what is the long term fix?

I upgraded to 4 and I noticed that after 4 has been up for an hour or so I click on the bookmarks. I see my list of bookmarks below but when I move the cursor down to select one, the list disappears.
The only way I have found to fix this is to stop and start 4. I can then move the cursor down to select a bookmark. This problem has not occurred in previous versions.
ps.. no '''''delicious''''' installed

No, I see the three areas at the bottom of the Bookmark area that you refer to, but that also highlights an issue. When I want to save a story to my Reading List and click on Share then "Add to Reading List" then go back to look at what is stored in the Reading List, my recently-saved item is not there.
I looked thru the History tab and the Reading List tab and have been in the Bookmark tab. But even when I Save a Bookmark, that newly-saved Bookmark does not show up in the Bookmark area.
But then again, the next day (and actually just in the last half-hour) all of the functionality came back. When I look at the Bookmarks, suddenly, again, all of the Bookmarks that are on my Safari browser on my iMac are now there, and I can now Save a Bookmark.
It keeps coming in and out and that is what is driving me a little nuts.
Thanks.

Need to increase the font size of SAP printer

Hi all,
We had some new HP printers HP4015 which needs to print from SAP . we created the new device type ZHPLJCM1 after checking correct device type for it from HP printer site. For some users printouts are coming in small fonts ,they wanted it to print in big fonts .
These are some of the t codes that they use KAH3 , FB03 , Y_DEV_39000067.
we tried to change the printer fonts in SE73 of that particular device type and increased the font size , but that also ended in vain.
Kindly suggest possible ways by which we can solve this issue.
Please let me know if more information are needed.

Hi,
Is this ABAP lists, sapcript or smartforms? For sapscript or smartforms, you need to specify the font size in the paragraph/character formats for sapscript and in the smartstyle for smartforms.
For ABAP lists, the font size is selected based on the format used. e.g. If you create a list with format X_65_255, it should print in landscape and the font size is calculated based on the size needed to fit 255 characters into a page. If the format is X_65_132, then the font size is calculated based on the size needed to fit 132 characters into a page so it is a bit larger.
Regards,
Aidan

I need to move the iTunes library to an External Hard Drive to free up space on iMac. Need suggestions on type of External Hard Drive to use. A Multimedia Hard Drive like LaCie LaCinema Classic HD Multimedia Hard Drive OR a Large Desktop Hard Drive?

I need to move an iTunes library to an External Hard Drive to free up space on iMac. I Need suggestions on type of External Hard Drive to use. Should you use a Multimedia Hard Drive like LaCie LaCinema Classic HD Multimedia Hard Drive OR a standard Large Desktop Hard Drive like Western Digital/Seagate/LaCie?

There is no benefit to the multi-media feature on the first drive you mentioned. If you are going to look at differences between certain drives, I'd look at the differences in reliability first.

Need to move the data to final internal Table

Hi all,
TYPES: BEGIN OF TY_MARA,
       MATNR       TYPE MATNR,         " Material Number
       ZZBASE_CODE TYPE ZBASE_CODE,    " Base Code
       END OF TY_MARA,
       BEGIN OF TY_MAKT,
       MAKTX       TYPE MAKTX,         " Material Description
       END OF TY_MAKT,
       BEGIN OF TY_MARC,
       WERKS       TYPE WERKS_D,      " Plant
       END OF TY_MARC,
       BEGIN OF TY_QMAT,
       ART           TYPE QPART,         " Inspection Type
       END OF TY_QMAT,
       BEGIN OF TY_MAPL,
       MATNR        TYPE MATNR,        " Material
       PLNTY        TYPE PLNTY,        " Task List Type
       END OF TY_MAPL,
       BEGIN OF TY_PLKO,
       VERWE             TYPE     PLN_VERWE,     "     Task list usage
       END OF TY_PLKO,
      BEGIN OF TY_FINAL,
       MATNR          TYPE    MATNR,          " Material Number
       MAKTX          TYPE    MAKTX,          " Material Description
       ZZBASE_CODE    TYPE    ZBASE_CODE,     " Base Code
       WERKS          TYPE    WERKS_D,        " Plant
       CLASS          TYPE    KLASSE_D,       "     Class Number
       ART             TYPE    QPART,           " Inspection Type
       VERWE             TYPE    PLN_VERWE,       " Task list usage
     END OF TY_FINAL.
DATA: I_MARA TYPE STANDARD TABLE OF TY_MARA ,
      I_MAKT TYPE STANDARD TABLE OF TY_MAKT ,
      I_MARC TYPE STANDARD TABLE OF TY_MARC ,
      I_QMAT TYPE STANDARD TABLE OF TY_QMAT ,
      I_MAPL TYPE STANDARD TABLE OF TY_MAPL ,
      I_PLKO TYPE STANDARD TABLE OF TY_PLKO ,
      I_KLAH TYPE STANDARD TABLE OF TY_KLAH ,
      I_FINAL TYPE STANDARD TABLE OF TY_FINAL ,
      WA_MARA TYPE TY_MARA,
      WA_MAKT TYPE TY_MAKT,
      WA_MARC TYPE TY_MARC,
      WA_QMAT TYPE TY_QMAT,
      WA_MAPL TYPE TY_MAPL,
      WA_PLKO TYPE TY_PLKO,
      WA_KLAH TYPE TY_KLAH,
     WA_FINAL TYPE TY_FINAL.
data: v_mtart         type    mara-mtart,
      v_matnr         type    mara-matnr,
      v_zzbase_code   type    mara-zzbase_code,
      v_werks         type    t001w-werks,
      v_beskz         type    marc-beskz.
selection-screen skip 1.
selection-screen begin of block b1 with frame title text-001.
select-options: s_mtart    for v_mtart default 'halb' to 'zraw',
                s_matnr    for v_matnr,
                s_zzbase   for v_zzbase_code,
                s_werks    for v_werks obligatory,
                s_beskz    for v_beskz.
selection-screen end of block b1.
start-of-selection.
select matnr
       zzbase_code
       from mara into table i_mara
       where mtart in s_mtart       "Material Type
       and   matnr in s_matnr        "Material
       and   zzbase_code in s_zzbase."Base Code
select maktx
       from makt into table i_makt for all entries in i_mara
       where matnr = i_mara-matnr.
select werks
       from marc into table i_marc for all entries in i_mara
       where matnr = i_mara-matnr
       and werks in s_werks "plant
       and beskz in s_beskz."Procurement Type
select art
       from qmat into table i_qmat for all entries in i_mara
       where matnr = i_mara-matnr
       and werks in s_werks.
select matnr
       plnty from mapl into table i_mapl for all entries in i_mara
       where matnr = i_mara-matnr.
select verwe
       from plko into table i_plko for all entries in i_mapl
       where plnty = i_mapl-plnty.
this is my logic . i need to move this to final internal table i_final. how can do it. will anybody tell me with coding.
Thanks,

Hi,
Include matnr field in all your type declaration and plnty in the ty_plko, type declaration.
loop at the internal table i_mara.
read the other tables with read statement.
assign the the required fields to the work area wa_final. Append it to i_final.
start-of-selection.
select matnr zzbase_code
    from mara   into table i_mara
   where mtart in s_mtart "Material Type   and matnr in s_matnr "Material and zzbase_code in s_zzbase. "Base Code
select matnr maktx
    from makt   into table i_makt
     for all entries in i_mara   where matnr = i_mara-matnr.
select matnr werks
    from marc into table i_marc
     for all entries in i_mara where matnr = i_mara-matnr   and werks in s_werks "plant   and beskz in s_beskz."Procurement Type
select matnr art
    from qmat into table i_qmat
     for all entries in i_mara where matnr = i_mara-matnr   and werks in s_werks.
select matnr plnty
    from mapl into table i_mapl
    for all entries in i_mara where matnr = i_mara-matnr.
select plnty verwe
    from plko into table i_plko
     for all entries in i_mapl where plnty = i_mapl-plnty.
Loop at i_mara into wa_mara.
read table i_makt into wa_makt with key matnr = wa_mara-matnr.
(do this for all the internal tables.)
read table i_plko into wa_plko with key plnty = wa_mapl-plnty.
wa_final-MATNR = wa_mara-matnr.
wa_final-MAKTX = wa_makt-maktx.
wa_final-ZZBASE_CODE = wa_mara-ZZBASE_CODE.
wa_final-WERKS = wa_marc-werks.
wa_final-ART = wa_qmat-art.
wa_final-VERWE = wa_plko-verve.
append i_final from wa_final.
endloop.
Hope this helps.
Regards,
Dhasarathy. K

Why do i need to move the mouse?

I am writing a simple digital clock. it calls the repaint in an actionperformed every 1 second and updates the clock. But fo some reason it wont repaint until i move the mouse?? why is this?

import java.awt.*;
import java.util.*;
import java.applet.Applet;
import java.awt.event.*;
public class SimpleDigitalClock extends Applet implements ActionListener{
          private javax.swing.Timer timer;
          private int digit;
          private int digit2;
          private int digit3;
          private int digit4;
          private int digit5;
          private int digit6;
          private int x, y , size;
          private int thickness = 5;
          private Color color;
public void init(){
timer = new javax.swing.Timer(1000, this);
timer.setInitialDelay(1000);
timer.start();
public void paint(Graphics g) {
int y = 30;
     g.fillRect(70,42,5,5);
     g.fillRect(70,58,5,5);
     g.fillRect(150,42,5,5);
     g.fillRect(150,58,5,5);
     GregorianCalendar cal = new GregorianCalendar();
     digit5 = cal.get(Calendar.HOUR)/10;
     x = 10;
     if (digit5==0 || digit5==2 || digit5==3 || digit5==5 || digit5==6 || digit5==7 || digit5==8 || digit5==9)//top hoz
                    g.fillRect(x, y ,25 ,thickness);
                    if (digit5==2 || digit5==3 || digit5==4 || digit5==5 || digit5==6 || digit5==8 || digit5==9)//mid hoz
                    g.fillRect(x, y+20,25 ,thickness);
                    if (digit5==0 || digit5==2 || digit5==3 || digit5==5 || digit5==6 || digit5==8)//bot hoz
                    g.fillRect(x,y+40,25,thickness);
                    if (digit5==0 || digit5==4 || digit5==5 || digit5==6 || digit5==8 || digit5==9)//top left
                    g.fillRect(x ,y ,thickness ,20);
                    if (digit5==0 || digit5==2 || digit5==6 || digit5==8)
                    g.fillRect(x ,y+20 ,thickness ,25);
                    if (digit5==0 || digit5 ==1 || digit5==2 || digit5==3 || digit5==4 || digit5==7 || digit5==8 || digit5==9)//top right
                    g.fillRect(x+20,y ,thickness ,20);
                    if (digit5==0 || digit5 ==1 || digit5==3 || digit5==4 || digit5==5 || digit5==6 || digit5==7 || digit5==8 || digit5==9)
                    g.fillRect(x+20,y+20 ,thickness ,25);
                    digit6 = cal.get(Calendar.HOUR)%10;
                    x = 40;
                    if (digit6==0 || digit6==2 || digit6==3 || digit6==5 || digit6==6 || digit6==7 || digit6==8 || digit6==9)//top hoz
                    g.fillRect(x, y ,25 ,thickness);
                    if (digit6==2 || digit6==3 || digit6==4 || digit6==5 || digit6==6 || digit6==8 || digit6==9)//mid hoz
                    g.fillRect(x, y+20,25 ,thickness);
                    if (digit6==0 || digit6==2 || digit6==3 || digit6==5 || digit6==6 || digit6==8)//bot hoz
                    g.fillRect(x,y+40,25,thickness);
                    if (digit6==0 || digit6==4 || digit6==5 || digit6==6 || digit6==8 || digit6==9)//top left
                    g.fillRect(x ,y ,thickness ,20);
                    if (digit6==0 || digit6==2 || digit6==6 || digit6==8)
                    g.fillRect(x ,y+20 ,thickness ,25);
                    if (digit6==0 || digit6 ==1 || digit6==2 || digit6==3 || digit6==4 || digit6==7 || digit6==8 || digit6==9)//top right
                    g.fillRect(x+20,y ,thickness ,20);
                    if (digit6==0 || digit6 ==1 || digit6==3 || digit6==4 || digit6==5 || digit6==6 || digit6==7 || digit6==8 || digit6==9)
                    g.fillRect(x+20,y+20 ,thickness ,25);
                    digit = cal.get(Calendar.SECOND)%10;
                    x = 190;
                    if (digit==0 || digit==2 || digit==3 || digit==5 || digit==6 || digit==7 || digit==8 || digit==9)//top hoz
                    g.fillRect(x, y ,25 ,thickness);
                    if (digit==2 || digit==3 || digit==4 || digit==5 || digit==6 || digit==8 || digit==9)//mid hoz
                    g.fillRect(x, y+20,25 ,thickness);
                    if (digit==0 ||digit==2 || digit==3 || digit==5 || digit==6 || digit==8)//bot hoz
                    g.fillRect(x,y+40,25,thickness);
                    if (digit==0 || digit==4 || digit==5 || digit==6 || digit==8 || digit==9)//top left
                    g.fillRect(x ,y ,thickness ,20);
                    if (digit==0 || digit==2 || digit==6 || digit==8)
                    g.fillRect(x ,y+20 ,thickness ,25);
                    if (digit==0 || digit ==1 || digit==2 || digit==3 || digit==4 || digit==7 || digit==8 || digit==9)//top right
                    g.fillRect(x+20,y ,thickness ,20);
                    if (digit==0 ||digit ==1 || digit==3 || digit==4 || digit==5 || digit==6 || digit==7 || digit==8 || digit==9)
                    g.fillRect(x+20,y+20 ,thickness ,25);
                    digit2 = cal.get(Calendar.SECOND)/10;
                    x = 160;
                    if (digit2==0 || digit2==2 || digit2==3 || digit2==5 || digit2==6 || digit2==7 || digit2==8 || digit2==9)//top hoz
                    g.fillRect(x, y ,25 ,thickness);
                    if (digit2==2 || digit2==3 || digit2==4 || digit2==5 || digit2==6 || digit2==8 || digit2==9)//mid hoz
                    g.fillRect(x, y+20,25 ,thickness);
                    if (digit2==0 || digit2==2 || digit2==3 || digit2==5 || digit2==6 || digit2==8)//bot hoz
                    g.fillRect(x,y+40,25,thickness);
                    if (digit2==0 || digit2==4 || digit2==5 || digit2==6 || digit2==8 || digit2==9)//top left
                    g.fillRect(x ,y ,thickness ,20);
                    if (digit2==0 || digit2==2 || digit2==6 || digit2==8)
                    g.fillRect(x ,y+20 ,thickness ,25);
                    if (digit2==0 || digit2 ==1 || digit2==2 || digit2==3 || digit2==4 || digit2==7 || digit2==8 || digit2==9)//top right
                    g.fillRect(x+20,y ,thickness ,20);
                    if (digit2==0 || digit2 ==1 || digit2==3 || digit2==4 || digit2==5 || digit2==6 || digit2==7 || digit2==8 || digit2==9)
                    g.fillRect(x+20,y+20 ,thickness ,25);
                    digit3 = cal.get(Calendar.MINUTE)/10;
                    x = 90;
                    if (digit3==0 || digit3==2 || digit3==3 || digit3==5 || digit3==6 || digit3==7 || digit3==8 || digit3==9)//top hoz
                    g.fillRect(x, y ,25 ,thickness);
                    if (digit3==2 || digit3==3 || digit3==4 || digit3==5 || digit3==6 || digit3==8 || digit3==9)//mid hoz
                    g.fillRect(x, y+20,25 ,thickness);
                    if (digit3==0 || digit3==2 || digit3==3 || digit3==5 || digit3==6 || digit3==8)//bot hoz
                    g.fillRect(x,y+40,25,thickness);
                    if (digit3==0 || digit3==4 || digit3==5 || digit3==6 || digit3==8 || digit3==9)//top left
                    g.fillRect(x ,y ,thickness ,20);
                    if (digit3==0 || digit3==2 || digit3==6 || digit3==8)
                    g.fillRect(x ,y+20 ,thickness ,25);
                    if (digit3==0 || digit3 ==1 || digit3==2 || digit3==3 || digit3==4 || digit3==7 || digit3==8 || digit3==9)//top right
                    g.fillRect(x+20,y ,thickness ,20);
                    if (digit3==0 || digit3 ==1 || digit3==3 || digit3==4 || digit3==5 || digit3==6 || digit3==7 || digit3==8 || digit3==9)
                    g.fillRect(x+20,y+20 ,thickness ,25);
                    digit4 = cal.get(Calendar.MINUTE)%10;
                    x = 120;
                    if (digit4==0 || digit4==2 || digit4==3 || digit4==5 || digit4==6 || digit4==7 || digit4==8 || digit4==9)//top hoz
                    g.fillRect(x, y ,25 ,thickness);
                    if (digit4==2 || digit4==3 || digit4==4 || digit4==5 || digit4==6 || digit4==8 || digit4==9)//mid hoz
                    g.fillRect(x, y+20,25 ,thickness);
                    if (digit4==0 || digit4==2 || digit4==3 || digit4==5 || digit4==6 || digit4==8)//bot hoz
                    g.fillRect(x,y+40,25,thickness);
                    if (digit4==0 || digit4==4 || digit4==5 || digit4==6 || digit4==8 || digit4==9)//top left
                    g.fillRect(x ,y ,thickness ,20);
                    if (digit4==0 || digit4==2 || digit4==6 || digit4==8)
                    g.fillRect(x ,y+20 ,thickness ,25);
                    if (digit4==0 || digit4 ==1 || digit4==2 || digit4==3 || digit4==4 || digit4==7 || digit4==8 || digit4==9)//top right
                    g.fillRect(x+20,y ,thickness ,20);
                    if (digit4==0 || digit4 ==1 || digit4==3 || digit4==4 || digit4==5 || digit4==6 || digit4==7 || digit4==8 || digit4==9)
                    g.fillRect(x+20,y+20 ,thickness ,25);
public void actionPerformed(ActionEvent e) {
     repaint();

Inserting clip so it moves the others down

Hello,
I am using CS3.
I currently have several clips on my timeline. When i work fast, I tend to drag clips I need drop it into the time line. I expect it, to move the other clips to the right, without creating a blank space or without overlaying.
Unfortunatley all it does is overlay. Even when I hold ctrl and drag it, it then creates a space in the middle of the clip and cuts the pre-existing clip. I don't want that to happen.
I suppose I am looking to insert clips in a similiar fashion like how it was in the older version of premiere 6.0.
Please advise.

If I have 2 clips on the time line.
Part of the second clip is not so visible on my monitor.
I then drag a clip holding the ctrl button and position it by the 2nd clip. I am hoping it will automatically go to the end of the 2nd clip. However it simply overlays the clip. Please advise.
In the old version of premiere, in 6.0,it used to be a bit easier to drag clips.
How do I make it such that the default edit is a ripple edit, and not an overlay edit?
http://www.msdivine.net
http://www.youtube.com/msdivine

When I open a drop down menu from the tool bar, and move the pointer down the list of choices, they become constantly "darkly highlighted" and the typefaces change to black making them unreadable.

As the pointer is moved down the list of choices in a drop down box, once the pointer passes each choice, that choice becomes constantly “darkly highlighted” and the type face of that choice turns black. So, as the pointer moves down the list of choices all of the choices become a block of darkly highlighted black text, making it impossible to read the choices which were passed over by the pointer.
It is though the HTML, JavaScript or Java attribute of ''*<code>onMouseover</code>'' is missing the attribute of ''*<code> onMouseout</code>'', thereby when the user moves the pointer off the boundaries of the element, that element retains the CSS given it by the''*<code> onMouseover</code>''

I should probably add that i am working in asp!

"This connection is untrusted" shows up CONSTNATLY!!! and I cannot move the page down to get to the bottem of I understand the risks to override it. How do I do that or how do I TURN IT OFF!!!

Even sending this message gets the" This connection is untrusted"!!!!!How is that for stupid!!! How do I turn it off or do I have to use some other site and wipe firefox off my computer.

Just got this warning for facebook, Amazon, and Google, I have just told my clients to stop using firefox until the problem is fixed, it is a support nightmare because you have inexperienced users calling in convinced that they have a virus on their computer, and that they need to unplug the internet to prevent anything bad from happening.
I had one customer call in and say, "it says get me out of here, Oh my God what have I done I should never have gone online"
You know what can we have a better more accurate statement, on that warning, like Hi, thanks for stopping by this website may be sharing a security certificate with a parent organization, it may not really be a bad thing we just wanted you to know about it before you go on your merry way. Oh and by the way were going to make you jump through hoops and clicks check boxes and do this and do that before we let you go on your merry way, wait, " Are you really sure that you want to be doing this?" Do you know what your doing, perhaps you should call your ISP for advice, and get support from someone who has nothing to do with this issue.
Thanks Guys, appreciate all the calls, perhaps I should give them your email address. $%^$%#$

Later jet m1212 nf mfp need to move the font down a little to print on premium forms

Similar Messages

Maybe you are looking for