Latest 7.6.1 firmware broke all Airport Express connections with Airport Extreme

Installed the latest Airport Utility (6.0) last night. Once installed I ran Airport Utility and saw my 4 Airport Express N's, one Time Capsule, and Airport Extreme needed a firmware update to version 7.6.1. Installed to all of them, and initially everything came back up-and-running. All this equipment remains on 24-hours a day, and the four Airport Express are wirelessly joined to the Airport Extreme's wireless network.
This morning the wireless link between the Airport Extreme and all four Airport Express's was broken (flashing amber light on all of them). Power resets did nothing. The Time Capsule link was still good; however, the Time Capsule is connected to the Airport Extreme via ethernet. Visited this forum and saw other folks were having similar problems.
I saw no way of downgrading the Airport Extreme firmware with Airport Utility 6.0, so I downloaded Airport Utility 5.6. I launched it, and was able to downgrade the Airport Extreme firmware back to version 7.6. After hard resetting the four Airport Express units, I was able to downgrade their firmware also back to 7.6. Everything immediately came back online.
Am going to sit this firmware update out until more shelf life exists with it. I also agree the Airport Utility 6.0 seem to be a less capable step backward. Why someone thought we need a simpler interface for a "Utility" that resides in the "Utility Folder" is mystifying.

First I've updated my Extreme to 7.6.1, then, the Express.
Everything work fine untill I update the Airport Utility to the new version and rebooted my extreme, then my Express stop working (An can't be detected anymore by the Airport Utility, orange light)
So I took my laptop, plug a network cable between it and my Express (Now I was seeing it in the Airport Utility) and reconfire the wireless network connection between them.
Hope this Help!
Fred

Similar Messages

Airport express connect with Imac via lan line or can not?

I using IMac with connect to internet with DSL modem router (having 4 lan ports).
Now I put Airport express connect with one of Lan ports from DSL router and still connect my IMac with DSL router via lan line and still connect to internet via lan line (switch off airport function in Imac).
The Airport express is using for provide wireless internet and printer to my other PC.
My Question is can I still set up as above and connect share file to my PC via airport express?
Forget to tell that I'm very newby to mac.

chounws, Welcome to the discussion area!
Yes you can do that. Configure the AirPort Express (AX) to operate in bridge mode (not sharing a single IP address).

Does Airport Express work with Airport Base Station (not Airport Extreme)?

I'm needing to extend the range of my Airport base station. I purchased an Airport Extreme to funcion as a repeater, but it's not working. Will Airport Express work with a (white) Airport base station. If not, how can I extend the range besides moving the base station?

Can someone actually tell me how to set-up the Airport Express (with my Airport) so that it will act like a repeater. Once again, this is an Airport and not an Airport Extreme.

Airport Express connectivity with a remote server

I have gone to our ISP already with this question, but they cannot assist me. I am hoping someone here will be able to assist me in solving this problem. My boss wishes to connect to our server at our company from his home using an Airport Express. The company's server is housed on our work site and connected to an internal network. This network is in turn connected to our ISP via a DSL modem. We opened the ports needed in order to connect with the server in house and redirected incoming traffic to the server's internal ip address. We had our boss test connecting to the server from his home. He could not do so. We were asked to have him try connecting directly to his DSL (also from the same ISP as what our company has). He will be doing that this evening. However, this does not help the fact that this diminishes the whole idea of him having wireless capability in his home or when he is traveling. We had our ISP test accessing our server remotely using Telnet, and it was successful. They were connected directly, however, not using a wireless network.
Is there something that we are missing here involving some sort of setting? Or is this something I need our ISP to dig into further? Please let us know if you have any ideas or suggestions. Thank you.
Apple iBook Mac OS X (10.4.7)

To combat the issue, enable an HLB port on your FE servers (or any other pool you are using HLB on) and configure the health checks for the load balancer to use that port instead of the port used for TLS traffic.
Start by configuring the pool in Topology Builder, right click the pool, and choose Edit Properties>General. Place a check in the “Enable Hardware Load Balancer monitoring port” and specify a port.
Also you can refer below link
http://ocsguy.com/2011/11/02/lync-hardware-load-balancer-monitoring-port/
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"

Airport Express connection with my wireless network

Hi
I have tried to install my Airport Express, which was okay, but doing so I had to disconnect my wireless network.
What I would like to do is to connect the airport express to the wireless network (Linksys-router). I tried to choose the "Join an existing wireless network" in the admin utility, but now I have lost contact with my airport express base station.
Please help me....
BR Morten
IBM Thinkpad T43 Windows XP Pro

What I would like to do is to connect the airport express to the wireless network (Linksys-router).
What are you trying to do with the AirPort Express Base Station (AX)? Use it for streaming iTunes and/or share a USB printer, or extend your existing Linksys wireless network?

Airport express connection with broadband

Hi, am having trouble establishing a wireless connection. I plugged in my usb cable from my broadband hub into the unit and the usb light is not showing up on my broadband hub. It works fine when I plug it into my oldpc laptop. Any ideas?

sonyarea, Welcome to the discussion area!
Sorry but you need to replace your "broadband hub" with a device which has an Ethernet output.
The USB port on the AirPort Express (AX) is ONLY for a single compatible USB printer. It can NOT be used to connect to a USB Internet connection.

Hi..I have an AirPort Extreme base connected to my DSL Modem and has been working fine. But I recently bought another DSL modem along with the latest Airport Express. With this one however I can't get it to connect to the Internet. Any suggestions?

Hi..I have an AirPort Extreme base connected to my DSL Modem and has been working fine. But I recently bought another DSL modem along with the latest Airport Express. With this one however I can't get it to connect to the Internet. The light on the Express is flashing green though. Does it mean I have to re-set the settings on Airport Utility? I.e. the old settings haven't been cleared yet. Any suggestions?

Let's see if I can get this straight.
You have an Airport Extreme base station that is set to "Create a wireless network" and you have the box checked for "allow this network to be extended"....
Then you have an Airport Express that is set to "Extend a wireless network" which you selected the name of your network in the box...
Correct?
See this Apple document:
http://support.apple.com/kb/HT4259?viewlocale=en_US&locale=en_US
The wireless unit on the right of the diagram can be either of the newer Apple base stations.
Extreme, Express, Time Capsule

Airport Express connection to XP using WPA, working setup

I've been trying to get the Airport Express working with my XP laptop for several days. I used to use a Netgear wireless router to make my wired network wireless (ie. used it as an access point) and wanted to see if the AE could be set up the same way.
I've had the same problems everyone's talking about - my Macbook connected almost immediately (I set up AE to use the same SSID and password as my old wifi network) but my XP laptop would not. It didn't make sense that it was a PC vs Mac situation as I was tempted to think.
I started the setup informed by my experience with the Netgear wifi router configured as an access point, which called for the wifi router to be configured with a static IP outside the range of the DHCP of the main router, and the wifi router configured to NOT be a DHCP server. So I did the same with the AE. It didn't work. I didn't want to think that my AE was defective since I was able to set up the print server, working from all computers, including my wired PCs.
The thing that I finally noticed today is that though I had configured the AE to have an IP manually assigned (through Airport Admin), my main router was also assigning an IP address to the AE - the net effect of which was that the AE had 2 IPs assigned to it in the network. When I noticed this I tried changing the AE configuration to receive a DHCP IP (instead of manually configuring with a static IP), and then configured the main router to statically assign the AE an IP, thus ensuring that it has one IP address. It's working now.
Hopefully this will be of help - I feel your pain.

Yes - I installed latest available firmware version on the access point. No change in behaviour. Connectiion from XP notebook tp AP works fine permanentely btw.
Thank's,
Thomas

Can't see Airport Express unit, nor Airport Express Setup in my Network Settings

I can see my Airport Express in the Airport Express Utility App, lights are all green, but I can't see the unit, nor see the Airport Express Setup section inside my Network Settings. This is the case when trying to find the WiFi signal from 3 MacBookPros, as well as my iPad and iPhone (all running latest OS versions). I've been through the screenshots on line about how easy this is supposed to be to set up, but I cannot see the Express units at all. Oh, and I've downloaded the firmware updates and recycled the unit. No change. Bad Unit?

Do you want the Express to create a wireless network?
How did you configure the Express to connect to the Internet, and how are you connecting to the Internet now?
Here are the instructions: http://manuals.info.apple.com/MANUALS/1000/MA1613/en_US/airport_express_80211n_2 nd_gen_setup_guide.pdf
Let me know the page where you're getting stuck or where things aren't making sense.

Airport Express (2nd gen), Airport Extreme and Airport TimeCapule (3rd Gen) interoperability

Airport Express (2nd gen), Airport Extreme and Airport TimeCapule (3rd Gen) interoperability
When all configured to provide wireless the network (Wired/Wireless) become unstable and very slow. When I disable wireless on the Airport Express the problem disappears. The problem effects all endpoint clients (iPhones, iPads, Mac's and windows) Any ideas?
I own the following
Airport Express 802.11n (2nd gen)
Airport Extreme 82.11ac
Airport TimeCapule 802.11n (3rd Gen)
Config
Each of the Airport's WAN port is connected my AT&T Uverse modem
Latest firmware on each device
All use static IP's (192.168.1.x)
Airport's are all configured to "Create a wireless network" with same network name, security and password.
Wireless options are using Automatic for Radio's and Channels
Router mode is "Off (Bridge Mode)"

ragu75 wrote:
Config
Each of the Airport's WAN port is connected my AT&T Uverse modem
Don't do that. Decide which one of your AirPort Base Stations is to serve as your router. Connect that one, and no others, to the modem. Connect all the others to it, and configure them as bridges.

Airport Exreme - Airport Express droupout with multiple Airport Express sta

I have multiple airport express's, an iMAc, a Airport extreme router, all software/firmware to current release. If I play on the iMac and one set of remote speakers, no problems, once I add two airport express stations with iTunes, I get the dropouts. Any ideas. I have already got rid of wds, changd channels, tc. to no avail.

I have the same set up and had the same issue and a guy at apple support gave me a tip to try and it worked!. First remove all the expresses from the power outlets keeping your airport extreme running. I also recommend using a different channel say 11. and use ap grapher
http://www.chimoosoft.com/products/apgrapher/
to see if your network looks like it's running well after you resetup your everything or before you bother doing this. I found my audio gear was really messing with my airports bandwidth and when I moved it to a new spot ap grapher showed I was getting a nice steady 54mbit/sec.
So again unplug the expresses and keep the extreme up and running.
You must first do a reset on the airport express by pushing in the little white button on the bottom with a paper clip for a few seconds, but you should check out how to reset the airport express via apple's web site because there are 2 types of resets one with it plugged in and one with it not. Not sure which is right reset method so check that yourself.
Once you have reset it you want to set the first express to extend your preexisting airport extreme network using the airport setup utility. If you have two expresses you may only need to do this to the last one in the chain but it can't hurt to reset them all form scratch.
Once the first express is up and running you then unplug the airport extreme from it's power outlet. Then you go to set up the 2nd express after you reset it and here lies the trick. You extend the 2nd express off the first express without the extreme involved. Then you plug in the extreme back into the power and bingo you have tricked the express #2 to extend from the first express and they wind up with new ip numbers like 10.0.1 and 10.0.2. Instead of them competing for signal using the same ip address they now have their own individual ip address, it turns it into an extension chain. If that makes sense I don't know what the tech terms are for this but it did cure my issues of dropouts I thought it was odd that they had the same addresses so it makes sense that they should have their own.
Micro wave ovens cause drop outs and so do some wireless phones but you can always check on your signal using AP grapher. I found that when I walk around with my MacBookPro in my house that the expresses really don;t have much of a range so if they are really far apart that could also be an issue. I'm sure the N versions are much better and I am thinking about upgrading.
Hope this helps cause it sure took a long time to type:)

Airport Express (Model with 802.11G +54MBPS Mac/PC and Set Up Issues

Hi,
We have a 4 Mac and 1 PC Household. Cable Internet Service by Roadrunner.Cable model (owned) connected to a D-Link 802.11G wi fi router (by ethernet from cable modem)in the family room , then out to a Imac (the half moon base and LCD screen with a airport card also in the family room and the closet computer to the D-Link
router, (we did add a D-Link antenna to the router ? about 10 months ago (a D-Link ANT24-0700 (Version 1.2)and a HP 4 in 1 printer attached via USB to the Imac
,a eMac 1.25 ghz 1Gb ram with airpot card also connected wirelessly (no printer attached on the same floor but in a ajoinging room about 20 feet from the Router, and another eMac 1.0 Ghz 1Gb ram with airport card in the upstairs part of our house (a bedroom) and no issue with Internet connection (it has a Epson 3in 1 printer attached via USB, and a MacBook Pro with 802.11N wireless card in side , bought for a Christmas/Birthday Present and also for college.It to has no issues with the Internet where ever it may be in the house. Our sole PC a HP tower with a added D-Link WDA -2320 Range Booster Desktop Adapter (802.11G) and we added a D-Link Antenna same model as the other a ANT24-0700 to help with Internet access which it did as well as adding some ram to increase page loading time etc. It does not have a printer attached. I will get to the Topic Area now
The Airport Express. I was not involved in the set-up as I was laid up due to a bad back and post major knee surgery , But I always (especially recently) wondered why the light was amber and blinking. I read through the manual and also
Apple.com support and MacFixit.com (which is under construction and moved to part of Cnet.com)and then went to the Airport Express Discussion area (sorry for being so wordy) I need a Twitter account to post!) We have a network name for the D-Link and the computers all were added and it also supports a Xbox 360, a Sony PlayStation 3 and a Nintendo Wi (in online use without issue) but..
A network was also as it appears to myself) for the Airport Express and under the half moon bars showing connection strenght (there is our D-Link network "phoenix" with security protection WPA2 I believe) as I have set up the router, We had a Apple Base station prior that was ? 802.11B (a half moon white unit) still have it in the box ) So for normal daily use, checking e-mail and internet use all of the computers use the "phoenix" or D-Link supported Router 802.11G
and The other network calld Apple Network with numbers and letters after it (and hopefully security) password is unknown , The Airport Express is set up connected via USB to a HP B&W laser printer which has saved quite a bit of money on ink, To utilize that printer you must switch from "phoenix" The D-Link router network to the Apple Network (followed by letters and numbers) The Imac and the eMac in the family room and a ajoing room (after switching to the Apple Network
can than print to the lasr printer. The eMac upstairs and the HP Windows XP Professional software can not print to the laser printer (yet the HP PC shows it as a individual network and a strong signal, equal to the Internet connection from the D-Link, and the eMac (after switching under the half moon (not the proper name I am sure) to get to the Apple Network to print , it will not print, yet it shows a 5 bar signal, same as the D-Link connection. I do believe we have two seperate networks (but do not understand why the two Mac's in the family room can print to the laser printer by simply switching networks and then file and print. ** One other 9probaly major item is that it states to set up the Airport Express with a Mac With OSX 10.4 or later (at the time of set up, we had the Imac and two eMac's all running Panther OSX 10.3.9 9which they continue to have installed) We obtained the HP Tower and Monitor and HP 4in 1 printer ust before Christmas in 2008 and the MacBook Pro in Mid December 2009 (current model and running Snow Leopard 10.6. The HP Tower runs Windows Xp Professional (Service Pack 3) so the MacBook Pro which is much more mobile , could be used to do the set-up, or the HP Tower coulf be moved temprarily, I do recall if Router changes (at least with The D-Link You need to be connected by Ethernet to the Mac
that would be doing the set up/configuration of the router (and it runs OSX 10.3.9 and is a older Mac (with 80Gb Hard drive that is partioned for OS9 and OSX as well , it is under a Ghz processor wise and less than 1 Gb of ram as the last ram slot required a seal to be broken and 256mb of ram (?) could be added
it has 768 mb of ram but knock on wood running well. We use Lacie external drives
on the Imac and both eMac's and need to get external drives for the HP PC as well as the Mac Book Pro (15" screen)
I apoogize if I repeated myself, and rambled but I wanted to (in one post) to explain our set up and network configuration
Questions
1) if indeed it is that the two networks is true and a set yp that is not correct
can the Airport Express be configured without opening up the router (when ever that happens it seems one computer is unable to get online and each time its a differnt one a Mac or veen the PC
The PC under My Computer and Networks clearly shows the wto distinct and seperate netwoks with strong signals and the distance is not far (it is through a floor as the other emac and the PC are upstairs and cabling by ethernet is not a option
2) If I need to open the router would I add the Airport Express as a client as if it was one of the computers or gaming systems on the network? (adding the Mac adress or IP address (not sure how you find the Mac address) and its been while since the router was opened up for any additions or work on it.
3) would it be on the same channel as the router or not ?
4) Hopefully with proper configuration the light will stay on (and green) on the A/E and the eMac and HP PC will be able to print to the laser printer. Currentlt
when anything needs printed from the PC its put on a Flasg Drive and plugged in tothe Imac and the the Apple Network is selected and data printed, The eMac upstairs has the option of using the attached Epson 3 in one or doing the Flash stick work around.
I would be verya appreciative if some one took a look at the set up above and advised me of what is right, what is not right* and what to do to fix things up
I would imagine after proper set up, delete the Apple Network from the PC and eMac upstairs and ? all of the computers as we should have one base station (the D-link and the spoke (the A/E connected by UBS to the A/E (it may be ethernet but the cable connection from the A/E to the HP laser printer is correct (the rest of the A/E set up ... Please , tell me where it is and where it should be
and ? any idea why we can print to the laser printer down stairs and not up stairs ? it did mention printer set up with Panther as possible, page 43 of themanual we have un chaper 5 Tips and Troubleshooting (under whn your printer isn't responding) (we do not have the interfereance listed in the manual,
our phones are land line, one 900 mghz and the others 5.8 ghz
It is possible to move the A/E and laser printer if that would help the two computers (desktops) upstairs) bt the distance is way less than 150 but their is a floor and ? duct work (metal ) but I think here is a place to stop typing and let some of the experts on the discussion forums take a look.
one lst note (as the lap top will be going off to college in the fall (runnning Snow Leopard, and the other 3 Mac's run Panther OSX 10.3.9 should the HP PC windows Xp Professional be the computer to set up the air port express and the Airport Utility proram installed & would this conflict with the current Router (set up by a Macc running OSX 10.3.9 (Panther) i.e (should both set ups be on the same computer?) but actually aThe D-Link is OSX10.3.9 compatible (and 802.11G) and set up requires ethernet connection to a Mac (You type in the numbers and . etc and password as administror and you are in, or should the admin be on the same cpmpuer for the router and A/E ?
(and considering a Airport Extreme Base Station as well as dual frequency simulataneus and 802.11N (for the laptop now) and future, or wait. The 802.11
in theory would broadcast farther..?? even if computers had 802.11b(our Mac Desk tops and the PC 802.11B card
Thanks Again!!!
Many, Many Thanks
amnienttales

William Boyd Jr.
Hello again,
D-Link Router is model DGL-4300 (along with a D-Link ANT24-0700 Omnidirectional
7dbi Antenna . Our Cable Internet ISP (Roadrunner) provides consumers with dynamic ISP address's . All Mac's have Airport Cards and The Hp Tower XW4550 has a D-Link Rangebooster G Desktop Adapter WDA-2320 (also with a D-Link ANT24-0700 Omnidirectional 7 dbi Antenna (the PC OS is Win XP Pro Service Pack 3) The 3 desktop Mac's run OSX Panther 10.3.9 , The 15" MacBook Pro OS is OSX 10.6 Snow
Leopard (not sure what is after the .6 (right now) D-Link's website is
http://www.dlink.com , I have configured this router multiple times in the past.
also added as clients on the network (Utilizing the D-Link Router) are a X-Box 360, Sony Play Station PS3, and a Nintendo Wii all of which have on line ability
and enables online video game play with any one online.
As mentioned prior the Airport Port Express is Model A1084 Part No. M9447OLL/A
which is USB conected to a HP LaseJet B&W , model 1020 and some how the two computers near it can switch to the Airport Express Network from the D-Link Router based Network and print wirelessly to the A/E connected LaserJetPrinter
I realize I will need to reconfigure the D-Link Router and add the A/E as a client. I will try first to use the Airport Utility and see if I can do anything
Utilizing it (adding it to the D-Link network, I think its unlikely but worth a try but* the password is unknown but I have a few guess's as to what it may be.
I do have the necessary admin and network paswwords to cconfigure the D-Link Router,
1) * If the the A/E Utility experiment fails and I need to re-configure the router * do I need to (as per the Airport Express Set Up Guide (Use a Mac with OSX 10.4 or later or a PC with Win Xp Home or Professional (have a desk top PC that has the specs) and The Mac Book Pro meets the Mac Spec's)
If I can not get a password to work on the A/E I would reset it using the reset button
And before plugging in the A/E , connect the appropraite cables in our case a USB cable to the LaserJet Printer then plug in the A/E
2) I would then connect by Ethernet from Either the Mac Laptop or The PC to the D-Link router (if not the router will not set-up correctly)
3) The one question that puzzles me is that we are not using the A/E as a base
but a client
in two sections(Using Airport Express , connecting a Printer via USB
and use Airprt Utility to create a new network or join a new newWireless computers using Mac OSX 10.2.7 (Tiger) or later or a PC with Windows XP and it then goes in to the steps of ising the printer for both a Mac and a PC (using Bonjour on the CD that came with the A/E (this appears to contradict needing to use Mac OSx 10.4 or a PC with Win Xp set the A/E up for use as a printer
(joiing a new network or existig one)
And in Chapter 5 Tips and Roubleshooting= Your Airport Express Status Light Flashes amber & Your Printer is not responding (it is flashing amber and the printer does not respond to the two computers upsstairs (one Mac running OSX 10.3.9 & One PC running WinXp and its states to make sure the printer is selected
in the Printer list o client computers, to do this on a Mac using OSX 10.3 or later , open Printer Set Up Utility and follow steps and if a PC with Windows XP , Open Printers and faxes and then follow steps
in Closing ? can I configure the A/E Utility with a Mac using 10.3.9 as above or
? Per Chapter 1 Getting Started use a Mac with OSX 10.4 or later or a PC with Windows Xp Home or Professional
Perhaps I am taking the tips and trouble shooting and Printer Set up out of context or does the getting Started Computer specs contradict them or are they
for use if the A/E was going to be a Base Station and not a client..
Will keep at it,
ambienttales

Printing to Airport Express connected Laserjet 1012 very slow after update to 10.6.8

After updating a pair of computers that we have here to 10.6.8, printing to our Airport Express connected HP LaserJet 1012 has become incredibly slow. I timed it and it is taking 2:30 to print a blank page, whereas printing the same blank page under 10.6.7 (on an external drive connected to the same MacBook Pro) happens within 2 seconds. One thing that I have noticed is that when I bring up the HP Printer Queue the computer says 'connecting to printer' for 20 - 30 seconds, then sits at 50% complete on the printing for some time - anyone else running into similar problems?

Because I am not experiencing the same issue I have not needed to apply the CNET article. But just to be clear, did you follow the instructions to the letter?
If you did and it's still not working then you can begin narrowing down where the problem is by following some basic trouble shooting steps. First thing I'd try is creating a new user account (call it TEST ACCOUNT) and leave it alone, then try printing from that account. If it works then you know it's a software issue in your normal user account. If it still doesn't work then what I'd do is:
1. Download 10.6.8 Combo Update at http://support.apple.com/kb/DL1399
2. Disconnect all peripherals (including the printer)
3. Backup using both Time Machine and/or a Bootable Clone using SuperDuper or Carbon Copy Cloner
4. Restart from the Bootable Clone or the Snow Leopard install discs.
     a) choose language
     b) Click Utililities Menu
     c) Disk Utility
     d) highlight the internal HD and the First Aid tab
     e) Repair Disk Permissions, Verify Disk & Repair Disk.
     f) exit Disk Utility and restart in Safe Mode
5. Install the Combo Update
6. Restart normally and test the system
7. Begin connecting peripherals one by one and testing each.

Why does 2 Airport Expresses connects to one another instead of connecting to the primary Airport Extreme For internet Connectivity ?

I have Netgear DG834G router only for dsl connectivity wifi connectivity to that router is off. i have connected netgear that provides adsl connectivity to the (Shakeel's Airport Extreme) Airport Extreme dual band Wireless N 5th generation via cat 5 cable so airport extreme is the main wifi device through which i get wifi signals at my home. now our house is big and i have installed the adsl netgear modem and airport extreme router at the same place in my room in the upper story but the signals are weak even in the upper story at the other end of the house so i have installed the new airport express dual band wireless N in the upper story (Kafeel's airport express) and it is connected to the primary airport extreme (Shakeel's Airport Extreme) wireless router in range extention mode it repeats the same ssid. Our ground floor has another airport express dual band wireless N the new one ( Lounge's airport express) signal was weak there so i installed another airport express (Lounge's Airport Express) their and configured it to extend the range of primary router airport extreme (Shakeel's Airport Extreme) in the upperstory with the same ssid. Now the problem i am facing that sometimes lounge's airport express connects to kafeel's airport express instead of connecting to the airport extreme and the signals in lounge are weak because all the devices are connected to kafeels airport express and does not connect to lounge air port express. but when lounge airport express is connected to primary router airport extreme then everything works fine devices connect to lounge airport express and signals are full. i have took pictures of the problem i am facing you will understand better by having a look at it. In normal working setup both the airport expresses are connected to airport extreme which is shown in this picture
The second picture shows when lounge airport express is connected to kafeels airport express and not the airport extreme (Shakeel's Airport Extreme) this is the problem.
isnt there a way to correct this so that they dont connect with each other and connect to the airport extreme ?

Lounge's AirPort Express must be located signficantly closer to Shakeel's AirPort Extreme than it is to Kafeel's AirPort Express, and there must be fewer obstructions in the signal path than the other possible connection.
The reason is that if you want Lounge's AirPort Express to connect to Shakeel's AirPort Extreme, it must receive a significantly stronger wireless signal from Shakeel's AirPort Extreme than it does from Kafeel's AirPort Express.

Airport Express connection questions

This is what I am trying to do. Can I share an internet connection to a computer that does not have a wireless connection through an Airport Express connected to the wireless router and an ethernet cable to the computer?

No the following also work
- a Linksys WRT54G or WRT54GS (not latest versions v5)
- a Belkin Belkin F5D7230-4 and F5D7231
- one specific model from SMC (can't find model number right now)
- one specific model from Buffalo
- BT Voyager 2100
For wireless routers not on this short list - not possible.
In particular, it will not work with any WiFi routers from D-Link or Netgear.
iFelix

Latest 7.6.1 firmware broke all Airport Express connections with Airport Extreme

Similar Messages

Maybe you are looking for