Latest Adobe Update causes IE 9 to stop working

Two days ago I was prompted to update my Flash Player. After installing the update my browser, Internet Explorer 9, will shut stop working and I get the message:
"Internet Explorer has Stopped Working
A problem caused the program to stop working correctly. Windows will close the program and notify you is a solution is available."
Then I get taken to the error screen where it says: "When a website causes a failure or crash, Internet Explorer attempts to restore the site. It stops after two tries to avoid an endless loop."
I have uninstalled and reinstalled the flash player, I have reset IE back to default settings. This has not happened before and it was only after I did the last update.
- Windows 7 64-bit
- Internet Explorer 9
- Flash Player 11.8.800.94

Please try resetting the IE browser.
http://support.microsoft.com/kb/923737
if that doesn't help then try a clean install adobe flash player.
http://forums.adobe.com/message/4041846#4041846#4041846

Similar Messages

Flash 11.5 update causes my website to stop working.

Since the latest update, portions of my flash based website have stopped working. When you enter my site, a slideshow begins to play. Since the update, the slideshow stops after the first image. Same if you enter the galleries. Choose a gallery and only the first image loads. Spent an hour on the phone with tech support but they say I have to update my website. My fault, really? I'm unable to rewrite my website. I tried it in Firefox and IE9. Works perfectly after downgrading to 11.1.102.63 . Please tell me there is a fix for this.
http://www.joelatterphotographer.com/wedding/index2.php
Win 7 64
IE9

We apologize for the inconvenience. We're aware of the issue, and working diligently to get it resolved.
The issue appears to be limited to older Flash 8/ActionScript 2 content. If you have access to the ActionScript source, there are a couple workarounds here: http://forums.adobe.com/message/4841531#4841531#4841531.

LR3 update caused my LR5 to stop working

I did a dumb thing. I have a duplicate of an older computer on my current computer and when I clicked on an old image it opened in LR3 and informed me updates were available. I didn't notice it was LR3 and went ahead an did an update. When I closed out of this and went into Windows 7 my current LR5 file wouldn't open? Can someone help?

Whatever you did in LR3 has no effect on LR5. None.
Please tell us the symptoms regarding LR5.

System update caused DVD burner to stop working

After I updated to 10.4.5, I lost the ability to burn dvds. I can read them just fine but when i try to burn, its a no go. I thought updating to 10.4.6 would have fixed but no such luck.
anyone else having this issue?

This is from the System Profiler
SONY DVD RW DW-U21A:
Firmware Revision: AADB
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: No
I'm using the System to burn the disc, not toast or any other third party software.
I havent tried cleaning the drive, the machine is somewhat new.
The error message I am getting is as follows.
Burning the disc failed because the communication to the disc drive failed. (error code 0x80020022)

Photoshop 3D Extrusion stopped working after latest Adobe update

I have Creative Cloud subscription and Photoshop 3D Extrusion used to work fine (though slow).
After latest update several days ago it stopped working, displaying an error message instead:
"The 3D features require that 'Use Graphics Processor' is enabled in the Performance preferences. Your video card must meet the minimum requirements and you may need to check that your driver is working correctly"
The Graphic Processor is enabled, and the driver is working fine.
Is this a bug or a "feature" in new version? How to make it work as before the update?

Ken, who are "they"? I expect help from Adobe. Aren't you a staff member?
When Adobe sold me the Cloud it did not tell me that 3D features were not going to work.
The last update was applied only to Cloud version of Adobe products. It's not Photoshop specific. Something was wrong with the cloud software update.
I expect Adobe to fix the bug and make 3D features work again.

Adobe Photoshop CS3 has stopped working: A problem caused the program to stop working correctly.

I recently purchased a new desktop computer and installed Adobe CS3 Master Edition on it and I get the following error:
Adobe Photoshop CS3 has stopped working: A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
Out of the entire suite of tools only Photoshop will not launch. The weird thing is i also had the same Adobe programs installed on my laptop and I have not made any installation updates to that machine and i am getting the same error. I have always installed the same software on my two home machines with no problem until now. Any help is appreciated.
Thanks,
Andy

You'll probably going to have to uninstall, then re-install the application; but you need to provide a lot more information;
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

After I purchased the creative cloud, I receive an error message when trying to use premier pro cc 2014. It states "Adobe Premiere Pro 2014.2 has stopped working. A problem has caused it to stop working. Windows will close the program and notify you of

After I purchased the creative cloud, I receive an error message when trying to use premier pro cc 2014. It states "Adobe Premiere Pro 2014.2 has stopped working. A problem has caused it to stop working. Windows will close the program and notify you of a solution." When I used the trial I never received this message. Now after purchasing it I receive this error each time I open PP and am unable to use. it. Any ideas or support to fix this issue?

What does the detailed crash report say?
And have you updated your video card drivers from the GPU maker's website? (most crashes on launch are due to bugs in out of date video card drivers)

I'm getting the following error message when ever I try to start cs6 and the program gets close. "Adobe Photoshop CS6 has stopped working. A problem caused the program to stop working correctly."

Hi,
I’m getting the following error message when ever I try to start cs6 and the program gets close.
“Adobe Photoshop CS6 has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available”
Please advise what is the problem? and How to sort this out?
OS Name
Microsoft Windows 8.1 Pro
Version
6.3.9600 Build 9600
Other OS Description
Not Available
OS Manufacturer
Microsoft Corporation
System Name
JARVIS
System Manufacturer
Dell Inc.
System Model
Inspiron N5110
System Type
x64-based PC
System SKU
To be filled by O.E.M.
Processor
Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz, 2501 Mhz, 2 Core(s), 4 Logical Processor(s)
BIOS Version/Date
Dell Inc. A11, 8/3/2012
SMBIOS Version
2.6
Embedded Controller Version
1.01
BIOS Mode
Legacy
BaseBoard Manufacturer
Dell Inc.
BaseBoard Model
Not Available
BaseBoard Name
Base Board
Platform Role
Mobile
Secure Boot State
Unsupported
PCR7 Configuration
Binding Not Possible
Windows Directory
C:\Windows
System Directory
C:\Windows\system32
Boot Device
\Device\HarddiskVolume2
Locale
United States
Hardware Abstraction Layer
Version = "6.3.9600.17196"
User Name
Jarvis\JARVIS\Abhishek
Time Zone
India Standard Time
Installed Physical Memory (RAM)
4.00 GB
Total Physical Memory
3.16 GB
Available Physical Memory
1.21 GB
Total Virtual Memory
3.72 GB
Available Virtual Memory
1.55 GB
Page File Space
576 MB
Page File
C:\pagefile.sys
Hyper-V - VM Monitor Mode Extensions
Yes
Hyper-V - Second Level Address Translation Extensions
Yes
Hyper-V - Virtualization Enabled in Firmware
Yes
Hyper-V - Data Execution Protection
Yes
Display adapters:
and NVIDIA GeForce GT 525M.

Without the actual crash logs nobody can say, but chances are that your graphics hardware is to blame, so update the driver...
Mylenium

Problem with iTunes. I have Windows 8 on a new laptop. Installed latest version of iTunes. Can play music in My Library but when I click on Itunes Store I get the message "iTunes has stopped working. A problem caused the program to stop working correctly.

I have a new laptop with Windows 8 as operating system. Installed latest version of iTunes ontop computer. I can play music in My Library but when I click on iTunes, I get the message " iTunes has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify if a solution is available."
Anyone know what is the cause and if there is a resolution? Have tried to re-installing iTunes and have also tried restoring laptop to an earlier date.

iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
iTunes Store: Associating a device or computer to your Apple ID
http://support.apple.com/kb/ht4627
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
 Cheers, Tom

I got an error message: 'iTunes has stopped working. A problem caused the program to stop working correctly. The solution asked me to load latest version which I did many times and still not working... HELP!

[Window Title]
Microsoft Windows
[Main Instruction]
iTunes has stopped working
[Content]
A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
[Close program]
This is what I got... sorry, not very tech savvy to copy the error message onto here...
Have tried uninstalled and re-installed iTune, updated the new version of 10.6... many times over still not working!!!
I share the frustrations of many here. HELP!!!!!

Hi there Nok Saensanoh,
I would recommend taking a look at the troubleshooting steps found in the article below.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
-Griff W.

I keep getting this message: Adobe Photoshop CC 2014 has stopped working. A problem caused the program to stop working correctly. Then it shuts down the program.

I keep getting this message when I try to open my new Adobe Photoshop. The main screen comes on and a box for the tutorials then this. "Adobe Photoshop CC 2014 has stopped working. A problem caused the program to stop working correctly." When I say Okay to the message, it shuts down the program.

Refer below link once
Photoshop: Basic Troubleshooting steps to fix most issues

Lightroom suddenly stopped while I was working in it. I got the Windows message "Adobe Photoshop Lightroom 64 bit has stopped working. A problem caused the program to stop working. I have tried re-booting as well as reinstalling Lightroom 5.7 but when

Lightroom suddenly stopped while I was working in it. I got the Windows message "Adobe Photoshop Lightroom 64 bit has stopped working. A problem caused the program to stop working. I have tried re-booting as well as reinstalling Lightroom 5.7 but whenever I try to start the program I get the same message.

Is that really the exact message you are receiving?

Adobe Flash Player Update Service 11.6 r602 stopped working and was closed?

After trying many different fixes including uninstalling flash player and unsuccessfully trying to reinstall it, would consistently stop loading at about 57 percent. Either there are remains of registry keys interfering or your site or my computer has been attacked. No malware showing after checking with antivirus. Seen same message on other computers. Had to restore computer to earlier date but lost some contact info in the process in Skype. Possible problem from trying to install internet tv software, but restored to previous point there to. Computer works ok but slowed on internet considerably but message shows continuously daily need a better solution or let your site analyze my flash player. What can I do?
adobeloug

thank you for your info, I did edit the question to show I was using vista (business to be specific). I will try again with some afterthoughts. Will enable Java first. I remember that was a problem in a previous update, I thought that was always running and go through the steps again. I don't feel comfortable messing with the registry and if you can add some advice on how to deal with that safely that would be appreciated also. Thank you so much for your quick response. Also, isupgrade to explorer 10 recommended for vista or is it suppose to accommodate windows 8. I don't want to be a beta tester before they work out all the kinks sincerelyadobelougLou Grubin
Date: Tue, 9 Apr 2013 23:42:40 -0700
From: [email protected]
To: [email protected]
Subject: Adobe Flash Player Update Service 11.6 r602 stopped working and was closed?
    Re: Adobe Flash Player Update Service 11.6 r602 stopped working and was closed?
    created by Prabhuram R in Using Flash Player - View the full discussion
Hi, It would have been good if you had added your OS information. However, if it is Windows, please read the following: http://helpx.adobe.com/flash-player/kb/installation-problems-flash-pla yer-windows.html. For Mac, check in the following article: http://helpx.adobe.com/flash-player/kb/installation-problems-flash-pla yer-mac.html Hope the above links helps. With regards,Prabhu
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5221727#5221727
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5221727#5221727
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5221727#5221727. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Using Flash Player by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

FROM WINDOWS (VISTA) A PROBLEM HAS CAUSED THE PROGRAM TO STOP WORKING CORRECTLY. WINDOWS WILL CLOSE THIS PROGRAM AND NOTIFY YOU IF THERE IS A SOLUTION. FIRE FOX UPDATED TO THE LATEEST, I WOULD RATHER NOT HAVE AUTO UPDATES.

FROM WINDOWS (VISTA) A PROBLEM HAS CAUSED THE PROGRAM TO STOP WORKING CORRECTLY. WINDOWS WILL CLOSE THIS PROGRAM AND NOTIFY YOU IF THERE IS A SOLUTION. UPDATED TO THE LATEEST, I WOULD RATHER NOT HAVE AUTO UPDATES. [email protected] edit

You may select how and whether Firefox updates, although like most software it may be sensible to keep it up-to-date, it is more likely to remain secure and compatible with other software whilst up to date.
* for information on the options available see [[Updating firefox]] <--- clickable link ---

When I get the Please wait... message and have the latest Adobe update why won't the document open?

When I get the Please wait... message and have the latest Adobe update why won't the document open?

What is your operating system? Reader version ("latest" means nothing)?
Is this a local or only PDF? If online, in what browser?

Latest Adobe Update causes IE 9 to stop working

Similar Messages

Maybe you are looking for