Latest Anyconnect Upgrade Fails?

Hello, I have been having some problems, where some users have reported that when trying to connect to the Cisco Anyconnect they get prompted for an upgrade to the latest version that we have enabled on the ASA version is 3.1.0240, once they accept the software uninstalls the previous version but the upgrade then fails, leaving no installation on the system, if they try to download the version manually the installation fails and the only way to reinstall anyconnect is to delete all the Registry entries for anyconnect and do a manual installation, the OS where users have been having the problem are all in WIndows 7, although the upgrade has been sucessfull on some Windows 7 systems, both systems where the upgrade has been sucessfull and where it has failed are using the same company Antivirus.
Has anyone had this problem with the new AnyConnect version?
Thanks

Just go to:
http://www.oracle.com/technetwork/java/javase/downloads/jdk-6u26-download-400750.html
and download both 64/32 bit versions and install them if you can.
That should solve your issue.

Similar Messages

[Solved] latest filesystem upgrade failed

During last system upgrade ( pacman -Syu )，when upgrading filesystem-2011.08-1,
the system hang for a while, then pacman exit with some segfault error
I tried to fix it by typing ` pacman -Syu ` again, then got another error when upgrading linux-3.0.2-1
ERROR: file not found: `/etc/modprobe.d/usb-load-ehci-first.conf'
and filesystem is not in the upgrade package list, so I tried
sudo pacman -S filesystem
but I got some file confilct error
warning: filesystem-2011.08-1 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
error: could not open file /var/lib/pacman/local/filesystem-2011.08-1/desc: No such file or directory
error: could not open file /var/lib/pacman/local/filesystem-2011.08-1/desc: No such file or directory
error: could not open file /var/lib/pacman/local/filesystem-2011.08-1/desc: No such file or directory
error: could not open file /var/lib/pacman/local/filesystem-2011.08-1/desc: No such file or directory
error: could not open file /var/lib/pacman/local/filesystem-2011.08-1/desc: No such file or directory
error: could not open file /var/lib/pacman/local/filesystem-2011.08-1/desc: No such file or directory
error: could not open file /var/lib/pacman/local/filesystem-2011.08-1/desc: No such file or directory
error: could not open file /var/lib/pacman/local/filesystem-2011.08-1/desc: No such file or directory
error: could not open file /var/lib/pacman/local/filesystem-2011.08-1/desc: No such file or directory
error: could not open file /var/lib/pacman/local/filesystem-2011.08-1/desc: No such file or directory
error: could not open file /var/lib/pacman/local/filesystem-2011.08-1/desc: No such file or directory
error: could not open file /var/lib/pacman/local/filesystem-2011.08-1/desc: No such file or directory
error: could not open file /var/lib/pacman/local/filesystem-2011.08-1/desc: No such file or directory
error: could not open file /var/lib/pacman/local/filesystem-2011.08-1/desc: No such file or directory
error: could not open file /var/lib/pacman/local/filesystem-2011.08-1/desc: No such file or directory
error: could not open file /var/lib/pacman/local/filesystem-2011.08-1/desc: No such file or directory
error: could not open file /var/lib/pacman/local/filesystem-2011.08-1/desc: No such file or directory
error: could not open file /var/lib/pacman/local/filesystem-2011.08-1/desc: No such file or directory
error: could not open file /var/lib/pacman/local/filesystem-2011.08-1/desc: No such file or directory
error: could not open file /var/lib/pacman/local/filesystem-2011.08-1/desc: No such file or directory
error: could not open file /var/lib/pacman/local/filesystem-2011.08-1/desc: No such file or directory
Targets (1): filesystem-2011.08-1
Total Download Size: 0.00 MB
Total Installed Size: 0.06 MB
checking package integrity...
checking for file conflicts...
error: could not open file /var/lib/pacman/local/filesystem-2011.08-1/files: No such file or directory
error: could not open file /var/lib/pacman/local/filesystem-2011.08-1/files: No such file or directory
error: could not open file /var/lib/pacman/local/filesystem-2011.08-1/files: No such file or directory
error: could not open file /var/lib/pacman/local/filesystem-2011.08-1/files: No such file or directory
error: could not open file /var/lib/pacman/local/filesystem-2011.08-1/files: No such file or directory
error: could not open file /var/lib/pacman/local/filesystem-2011.08-1/files: No such file or directory
filesystem: /etc/crypttab exists in filesystem
filesystem: /etc/fstab exists in filesystem
filesystem: /etc/group exists in filesystem
filesystem: /etc/gshadow exists in filesystem
filesystem: /etc/host.conf exists in filesystem
filesystem: /etc/hosts exists in filesystem
filesystem: /etc/issue exists in filesystem
filesystem: /etc/ld.so.conf exists in filesystem
filesystem: /etc/motd exists in filesystem
filesystem: /etc/nsswitch.conf exists in filesystem
filesystem: /etc/passwd exists in filesystem
filesystem: /etc/profile exists in filesystem
filesystem: /etc/resolv.conf exists in filesystem
filesystem: /etc/securetty exists in filesystem
filesystem: /etc/shadow exists in filesystem
filesystem: /etc/shells exists in filesystem
Errors occurred, no packages were upgraded.
after search the forum, I found a post last year
https://bbs.archlinux.org/viewtopic.php?pid=833711
I only have the file " install " in /var/lib/pacman/local/filesystem-2011.08-1/
ls -l /var/lib/pacman/local/filesystem-2011.08-1/
total 4.0K
-rw-r--r-- 1 root root 1.6K Aug 10 07:41 install
I checked another machine which also installed Arch Linux,
it's package number is filesystem-2011.04-1
ls -l /var/lib/pacman/local/filesystem-2011.04-1/
total 12
-rw-r--r-- 1 root root 287 Jul 23 12:49 desc
-rw-r--r-- 1 root root 1804 Jul 23 12:23 files
-rw-r--r-- 1 root root 1623 Apr 8 18:08 install
Should I just copy the " desc " and " files " to my computer, then run `pacman -Syu` again
or
Upgrade that machine's filesystem to 2011.08-1, then copy the files to my computer to fix it ?
( I am afraid of upgrade error again)
Thank you
Last edited by lefthaha (2011-08-20 16:38:24)

I just upgraded filesystem to 2011.08-1 on my VM
then copyed the " desc, files " under /var/lib/pacman/local/filesystem-2011.08-1/
to my computer, and reinstall filesystem and kernel
$ sudo pacman -S filesystem --dbonly
$ sudo pacman -S filesystem
Running 'pacman -S filesystem'
warning: /etc/fstab installed as /etc/fstab.pacnew
warning: /etc/group installed as /etc/group.pacnew
warning: /etc/hosts installed as /etc/hosts.pacnew
warning: /etc/passwd installed as /etc/passwd.pacnew
warning: /etc/resolv.conf installed as /etc/resolv.conf.pacnew
warning: /etc/shells installed as /etc/shells.pacnew
warning: /etc/gshadow installed as /etc/gshadow.pacnew
warning: /etc/shadow installed as /etc/shadow.pacnew
upgraded filesystem (2011.08-1 -> 2011.08-1)
$ sudo pacman -S linux
after edited /etc/fstab, reboot the computer
During booting I got some filesystem error warning
system automaticlly checked and fixed those errors on root partition and reboot again
Then I can boot into X now
in /var/log/error.log I found something similar to previous booting error
Aug 19 20:39:42 MyHost kernel: [473315.923933] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
Aug 19 20:39:42 MyHost kernel: [473315.923939] ata1.00: BMDMA stat 0x65
Aug 19 20:39:42 MyHost kernel: [473315.923944] ata1.00: failed command: READ DMA EXT
Aug 19 20:39:42 MyHost kernel: [473315.923954] ata1.00: cmd 25/00:00:6f:20:bd/00:04:00:00:00/e0 tag 0 dma 524288 in
Aug 19 20:39:42 MyHost kernel: [473315.923955] res 51/40:00:d2:23:bd/40:00:00:00:00/e0 Emask 0x9 (media error)
Aug 19 20:39:42 MyHost kernel: [473315.923960] ata1.00: status: { DRDY ERR }
Aug 19 20:39:42 MyHost kernel: [473315.923963] ata1.00: error: { UNC }
Aug 19 20:40:13 MyHost kernel: [473321.025032] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
Aug 19 20:40:13 MyHost kernel: [473321.025038] ata1.00: BMDMA stat 0x65
Aug 19 20:40:13 MyHost kernel: [473321.025044] ata1.00: failed command: READ DMA EXT
Aug 19 20:40:13 MyHost kernel: [473321.025053] ata1.00: cmd 25/00:00:6f:20:bd/00:04:00:00:00/e0 tag 0 dma 524288 in
Aug 19 20:40:13 MyHost kernel: [473321.025055] res 51/40:00:d2:23:bd/40:00:00:00:00/e0 Emask 0x9 (media error)
Aug 19 20:40:13 MyHost kernel: [473321.025059] ata1.00: status: { DRDY ERR }
Aug 19 20:40:13 MyHost kernel: [473321.025062] ata1.00: error: { UNC }
Aug 19 20:40:13 MyHost kernel: [473328.558325] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
Aug 19 20:40:13 MyHost kernel: [473328.558331] ata1.00: BMDMA stat 0x65
Aug 19 20:40:13 MyHost kernel: [473328.558337] ata1.00: failed command: READ DMA EXT
Aug 19 20:40:13 MyHost kernel: [473328.558346] ata1.00: cmd 25/00:00:6f:20:bd/00:04:00:00:00/e0 tag 0 dma 524288 in
Aug 19 20:40:13 MyHost kernel: [473328.558348] res 51/40:00:d2:23:bd/40:00:00:00:00/e0 Emask 0x9 (media error)
Aug 19 20:40:13 MyHost kernel: [473328.558352] ata1.00: status: { DRDY ERR }
Aug 19 20:40:13 MyHost kernel: [473328.558355] ata1.00: error: { UNC }
Aug 19 20:40:13 MyHost kernel: [473333.355772] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
Aug 19 20:40:13 MyHost kernel: [473333.355779] ata1.00: BMDMA stat 0x65
Aug 19 20:40:13 MyHost kernel: [473333.355784] ata1.00: failed command: READ DMA EXT
Aug 19 20:40:13 MyHost kernel: [473333.355794] ata1.00: cmd 25/00:00:6f:20:bd/00:04:00:00:00/e0 tag 0 dma 524288 in
Aug 19 20:40:13 MyHost kernel: [473333.355796] res 51/40:00:d2:23:bd/40:00:00:00:00/e0 Emask 0x9 (media error)
Aug 19 20:40:13 MyHost kernel: [473333.355800] ata1.00: status: { DRDY ERR }
Aug 19 20:40:13 MyHost kernel: [473333.355802] ata1.00: error: { UNC }
Aug 19 20:40:13 MyHost kernel: [473338.984884] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
Aug 19 20:40:13 MyHost kernel: [473338.984891] ata1.00: BMDMA stat 0x65
Aug 19 20:40:13 MyHost kernel: [473338.984896] ata1.00: failed command: READ DMA EXT
Aug 19 20:40:13 MyHost kernel: [473338.984905] ata1.00: cmd 25/00:00:6f:20:bd/00:04:00:00:00/e0 tag 0 dma 524288 in
Aug 19 20:40:13 MyHost kernel: [473338.984907] res 51/40:00:d2:23:bd/40:00:00:00:00/e0 Emask 0x9 (media error)
Aug 19 20:40:13 MyHost kernel: [473338.984911] ata1.00: status: { DRDY ERR }
Aug 19 20:40:13 MyHost kernel: [473338.984914] ata1.00: error: { UNC }
Aug 19 20:40:13 MyHost kernel: [473345.947035] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
Aug 19 20:40:13 MyHost kernel: [473345.947042] ata1.00: BMDMA stat 0x65
Aug 19 20:40:13 MyHost kernel: [473345.947047] ata1.00: failed command: READ DMA EXT
Aug 19 20:40:13 MyHost kernel: [473345.947056] ata1.00: cmd 25/00:00:6f:20:bd/00:04:00:00:00/e0 tag 0 dma 524288 in
Aug 19 20:40:13 MyHost kernel: [473345.947058] res 51/40:00:d2:23:bd/40:00:00:00:00/e0 Emask 0x9 (media error)
Aug 19 20:40:13 MyHost kernel: [473345.947062] ata1.00: status: { DRDY ERR }
Aug 19 20:40:13 MyHost kernel: [473345.947065] ata1.00: error: { UNC }
Aug 19 20:40:13 MyHost kernel: [473345.980986] end_request: I/O error, dev sda, sector 12395474
after searching on the web, I found that maybe an old harmless problem related to kernel ?
https://bbs.archlinux.org/viewtopic.php?pid=293179
also found an error in /var/log/daemon.log
Failed to activate service 'org.freedesktop.Avahi': timed out
there is already a post about it, but not having a conclusion yet
https://bbs.archlinux.org/viewtopic.php?id=124485
Every things seen to work fine now
After few more test and reboot, I would mark this post [solved]
Thanks to everyone for replying m(_ _)m
P.S.
There is still a problem when using virtualbox 4.1.2-1 after reboot, but I think that may not related to this post
If I try to upgrade kernel of the VM to 3.0.2-1 ( currently 3.0.1-1 ), will cause VirtualBox and my computer crash
generating some assert error, produce segfault when I tried to type any command in shell
unable to launch any program in X, but if I switch to tty*, I only got
INIT:Id "x" respawning too fast: disabled for 5 minutes
So I have to push the reset button to force reboot
after restore VM to previous snapshot, not having any problem so far

Sync from iPhone to iCal on MacBook has failed since the latest iPhone upgrade, yesterday. It's worked in reverse, and all other sync operations appear to have worked. Any solutions, that I may not have already tried (over and over)

Sync from iPhone to iCal on MacBook has failed since the latest iPhone upgrade, yesterday. It's worked in reverse, and all other sync operations appear to have worked. Any solutions, that I may not have already tried (over and over)
(Sorry, first time user of these forums, and it's confusing in it's own right)

You may have to try deleting all the music from your phone (by going to Settings>General>Usage>Music, swipping All Music and tapping Delete), then sync it all back on with iTunes in order to fix this.

CUCM 8.6.2 to 9.1.2 Upgrade fails

I am trying to complete an upgrade of CUCM 8.6.2 to 9.1.2 however the upgrade fails at the very end - I have attempted this 4 times in various different ways from using SFTP to local media I get the following error;
HWModel=7835I3
CPUCount=1
CPUType= Intel(R) Xeon(R) CPU E5504 @ 2.00GHz
CPUSpeed=2000
MEMSize=4096
BIOSVer=IBMCorp. -[D6E150CUS-1.11]- 02/08/2011
ObjectId=1.3.6.1.4.1.9.1.585
OSVersion=UCOS 5.0.0.0-2
SerialNumber= ********
VendorOID=1.3.6.1.4.1.2]|<LVL::Info>
05/17/2014 13:54:49 upgrade_install.sh|Cleaning up download...|<LVL::Info>
05/17/2014 13:54:49 upgrade_install.sh|Cleanup upgrade source area.|<LVL::Info>
05/17/2014 13:54:49 upgrade_install.sh|Ejecting DVD (/dev/sda1)|<LVL::Debug>
05/17/2014 13:54:51 upgrade_install.sh|Removing /common/download/9.1.2.10000-28>
05/17/2014 13:54:51 upgrade_install.sh|Started auditd...|<LVL::Info>
05/17/2014 13:54:52 upgrade_install.sh|Started setroubleshoot...|<LVL::Info>
05/17/2014 13:54:52 upgrade_install.sh|Changed selinux mode to enforcing|<LVL::>
05/17/2014 13:54:52 upgrade_install.sh|Cleaning up rpm_archive...|<LVL::Info>
05/17/2014 13:54:52 upgrade_install.sh|Removing /common/rpm-archive/9.1.2.10000>
05/17/2014 13:55:02 upgrade_install.sh|File:/usr/local/bin/base_scripts/upgrade>
05/17/2014 13:55:02 upgrade_install.sh|set_upgrade_result: set to 1|<LVL::Debug>
05/17/2014 13:55:02 upgrade_install.sh|is_upgrade_lock_available: Upgrade lock >
05/17/2014 13:55:02 upgrade_install.sh|is_upgrade_in_progress: Already locked b>
05/17/2014 13:55:02 upgrade_install.sh|release_upgrade_lock: Releasing lock (pi>
Installation of UCSInstall_UCOS_9.1.2.10000-28.sgn.iso failed
An unknown error occurred while accessing the upgrade file.
A system reboot is required when the upgrade process completes or is canceled. .
I have previously used this ISO for other clients without an issue and have checked the MD5 is correct
Has anyone else experienced this issue?
Thanks,
Richard

We have got this resolved, after raising a case with TAC they identified that we were hitting the following bug;
CSCub53409
The detail on the bug is very limited but in our case it was caused by an issue with the numbering plan, GBNB 1.1(21) - we upgraded to the latest version 1.1(29) and the upgrade has now completed.

When I downloaded the latest Itunes upgrade, it was unable to download and i now cannot access itunes at all. it reads erro 7 (Windows error 126) and states msvcr80.dll is missing

When I tried to download the latest itunes upgrade, the download failed. Now I can't access itunes at all. popup says "MSVCR80.dll missing" Error 7 (Windows error 126). How can I fix this??

i try'ed down loading again, but still ITunes wont load! it says 'MSVCR80.dll'. And where is my songs had purchesed?? it *****!

Creative Zen Microphoto - "Firmware upgrade failed&qu

Hi,
two days ago my Zen Microphoto started in "Recovery Mode".
I had no means of getting out. I first selected "Clean Up" and rebooted, still "Recovery Mode".
Then I downloaded the latest firmware version for it:
ZENMicroPhoto_PCFW_L6__3_0.exe
Then I selected "Upgrade Firmware", acknowledged with "Yes", the firmware was deleted, but the windows firmware application said "no player connected" after connecting the player.
Okay, after googling a bit, I found out that I needed to downgrade from WMP to WMP 0.
I (painfully) did this and after installing an additional Registry Key via fixup.cmd the
ZENMicroPhoto_PCFW_L6__3_0.exe
detected the player (hurray!). It showed "Current Player Firmware Version .20.0 " and "Upgrade File Version .3.0".
When clicking on "Upgrade" at the windows application, the blue progress bar appeared and the player showed "Recovery Mode" and a blinking USB logo.
What it did NOT show afterwards was a gear symbol with "Upgrading firmware" (which I found on a screenshot in the internet).
When the blue progress bar of the windows firmware upgrade application reached about 85% it halted and after minute the windows firmware application showed "Firmware upgrade failed!" while the player only showed a black screen with "Recovery Mode" and the green battery symbol at the top.
I also tried the same procedure with
ZenMicroPhotoP4S_PCFW_LB__20_0.exe with the same result: "Firmware upgrade failed!"
Any ideas how to "repair" the player
Toddl
Message Edited by Toddl on 04-2-2008 09:40 AM

I have this same problem except with the Zen Vision: M. Any help would be appreciated.

Upgrading to ISE 1.3 error ISE Global data upgrade failed!

HI,
Has anyone come across this issue? when upgrading, it seems to start all well but then this happens:
- Data upgrade step 40/67, CertMgmtUpgradeService(1.3.0.616)... % Error: ISE Global data upgrade failed!
Rolling back the configuration database...
Starting application after rollback...
% Error: The node has been reverted back to its pre-upgrade state.
% Application install or upgrade cancelled.
I've also upgraded it to the latest patch and tried again but to no avail. This is an appliance (3415) that came shipped with 1.2. It's not been configured other than the initial cli wizard. I've upgraded a fair few appliances but I haven't seen this issue come up before. Any thoughts?
Thanks in advance for any info...

If this is a test setup then you can do fresh ISE install.back up existing config and restore it to 1.3. If its production then contact TAC

DPM 2012 R2 upgrade fails to run dpmsync -restoredb.

Hi,
Im experiencing some problems when trying to restore dpmdb.bak
Original setup was Win2012 Std. with DPM 2012 SP1 and latest RU, on a physical HP DL 360 Gen8
SQL is a local instance 2008 R2
Upgrade failed at the very end saying "failed to create dpm service", it was suggested that the probable cause
was that the system was pending reboot wich it was not!
I followed the error message and uninstalled DPM, rebooted and reinstalled DPM2012 R2, during install I had to point out an existing DPM instance/database wich I did, klicked the "check and install" and went on installing without any further problems.
I also checked "retain data" during the install.
When trying to restore the db using syntax "dpmsync -restoredb -dbloc c:\temp\dpmdb.bak -instancename msdpm2012 -dpmdbname dpmdb" I get the following error.
"Error ID: 454
DpmSync failed to connect to the specified SQL Server instance. Make sure that y
ou have specified a valid SQL server instance associated with DPM and you are lo
gged on as a user with administrator privileges.
Detailed Error: A network-related or instance-specific error occurred while esta
blishing a connection to SQL Server. The server was not found or was not accessi
ble. Verify that the instance name is correct and that SQL Server is configured
to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could
not open a connection to SQL Server)"
I enabled Named Pipes and entered TCP/IP port 1433 in SQL configuration manager and ran the command again with the same result.
When checking the databse using SQL Mgmt. Studio I found out that there was now two databases, the original MSDPM and
a new db named MSDPM_Servername, confusion!
Now, my SQL knowledge is poor to say the least so I'm hoping that someone has a solution or a tip to push me forward.
Any suggestion would be highly appreciated.
Thank you.
Peter Åkerblom Stockholm.

Additional information.
We found out that the dpmsync -restoredb command failed with reason "access denied", it could not overwrite the original db.
So we dropped the original db and moved it out of its default folder and ran the command again.
The dpmdb did this time in fact get restored to default path but some errors.
From event log:
The description for Event ID 3750 from source MSDPM cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Version 4.1.3313.0 of the DPM database, and version 4.2.1205.0 of the DPM application are not compatible.
Problem Details:
<DatabaseVersionMismatch><__System><ID>29</ID><Seq>0</Seq><TimeCreated>2014-10-21 07:45:57</TimeCreated><Source>d:\btvsts\21011\private\product\engine\service\dll\servicemodule.cpp</Source><Line>183</Line><HasError>True</HasError></__System><DatabaseVersion>4.1.3313.0</DatabaseVersion><BinariesVersion>4.2.1205.0</BinariesVersion></DatabaseVersionMismatch>"
From what I understand a database version upgrade should be taken care of during dpmsync-restoredb but I must be miskaten.
Any suggestions on how to upgrade the databse ?
Peter.

WRT350N- Firmware Upgrade Failed

when upgrading with .bin file (v1.05.8) via Administration - Firmware Upgrade, it fails when status showing 76% completion.
Please help what i need to do?
I already tried to boot in safe-mode to minimize programs running (firewall, etc), still showing Upgrade failed.
/v
Message Edited by viva on 10-20-2007 06:56 AM
(Edited subject to keep threads from stretching.
Thanks!)
Message Edited by JOHNDOE_06 on 10-20-2007 06:59 AM

Go to the control panel/network connections and right click on the local area connection. Click properties and roll down to highlight Internet protocol TCP/IP. Click the properties button and check "use the following IP address". Fill in 192.168.1.5 and tab through. The subnet mask will fill itself out to 255.255.255.0
make the preferred DNS server 192.168.1.1 (the router) and click okay.
If the computer succeeds in getting an IP address (verify this by opening a command window and typing "ipconfig" and seeing what it say under the local area connection), type ping 192.168.1.1 in the same command window and see if the router responds.
If so, you can use the TFTP.exe utility from linksys, available from linksysinfo.org at
http://www.linksysinfo.org/forums/downloads.php?do=file&id=4
Run this program, point it at the router IP 192.168.1.1 and show it the bin file you want to use. Might be a good time to use the released firmware rather than a beta. But that is your call. You can get the latest firmware from the linksys page.
If you are unable to ping the router, try putting the ethernet cable in a different port. Don't ask me why, but when my router bricked, it would only work on slot 4. Found this out by accident, but I was able to fix the router when I did this. If it does not work on any slot, you may be screwed. Call linksys and ask for a RMA to get a replacement. I would not tell them you bricked it with a beta firmware!

IPad IOS6 upgrade failed, iPad is now frozen

My iPad is 3rd generation, and I run iTunes (latest version) on a Windows 7 laptop.
Initially I chose to 'download only' in iTunes. Subsequently I started the upgrade process with the iPad connected to iTunes.
I got an error message saying the upgrade failed.
Now my iPad is showing the symbol to connect with USB cable to iTunes, but the iPad is not appearing in iTunes.
I've gone through the trouble shooting guide (checking versions, restarting computer etc.).
If I try to restart my iPad (pressing on/off and homebutton simultanously for 10 secs) it simply turns off the screen, and when I turn it on it displays the same again.

Force iPad into Recovery Mode
1. Turn off iPad
2. Connect USB cable to computer; leave the other end alone
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPad
Note: You need to be patient and repeat the above many times.

Firmware upgrade fails

I am having trouble upgrading the firmware on my WRE54G. My hardware is v.3 and the existing firmware is 3.01.01.
I downloaded the latest firmware and extracted the .img file. I went to the admin page of the expander, pointed it towards the new firmware, and hit "go." After a minute or so it said something like:
Firmware upgrade fail.
Fail!
No reasons are given.
Anybody have any idea what is going on?
Thanks,
Garth

I had a similar problem upgrading firmware with my WRT300N. What i did to solve the problem was first i downloaded and went through the winzip program given for the router, then i went back to the webpage of the router and retried the upgrade and it worked. I actually ignored by routers version, and downloaded and went through each winzip program and each firmware upgrade for every different version . **i only downloaded the firmware up to my version and my version**.
Message Edited by DaveY on 11-15-2007 07:01 PM

Help needed: iPhone 4 software upgrade failed many times

Hello. I've bought an iPhone 4, which its operating system is 4.3, and was prompt by iTunes about this iPhone 4 software upgrade to iOS 4.3.5. I've downloaded the software and waiting for quite some time and after the dowloading has completed, the file will be processed. After processing, there is a popup saying that somehow the software upgrade failed and said something like make sure that your connection is correct etc. Do you have any idea on how to solve this issue?
Help me, please. Thank you very much.

This is asked and answered many times each day. The forum search bar is on the right side of this page.
Diasble your firewall/security software and try again.

Upgrade fails in the phase STARTSAP_TBUPG during the upgrade of CRM 4 to 5

Hello,
Upgrade failed with the below message in the upgrade phase STARTSAP_TBUPG during the upgrade of CRM 4.0 to CRM 5.0
Error Message:
SYSTEM START failed, code -1
             -1: 'startsap.exe' returned an error
             See file 'D:\usr\sap\put\log\R3up.ECO' for details.
R3up.ECO:
SAPup> Starting subprocess startsap.exe with id 5844 at 20080402142258
EXECUTING D:\usr\sap\put\exe\startsap.exe name=SID nr=00 SAPDIAHOST=Hostname
Environment: dbms_type=mss
Environment: dbs_mss_schema=cdu
STARTSAP failed
Details are written to D:\usr\sap\put\tmp\startSID.log
Process with ID 6276 terminated with status -1
startSID.log
running D:\usr\sap\put\exe\sapstart.exe name=SID nr=00 SAPDIAHOST=Hostname -wait
SAPSTART finished successfully on Host_SID_00, but at least one process doesn't run correctly:
     msg_server.exe, MessageServer, Running, 2008 04 02 14:22:58, 0:03:19
     disp+work.exe, Dispatcher, Running, Message Server connection ok, Dialog Queue time: 0.00 sec, 2008 04 02 14:22:58, 0:03:19
     igswd.exe, IGS Watchdog, Stopped, 2008 04 02 14:22:58, 0:00:00
D:\usr\sap\put\exe\sapstart.exe=>sapparam(1c): No Profile used.
It is trying to start the shadow instance and failing by ending all the work process
DEV_DISP:
trc file: "dev_disp", trc level: 1, release: "700"
sysno      01
sid        SID
systemid   560 (PC with Windows NT)
relno      7000
patchlevel 0
patchno    150
intno      20050900
make:      multithreaded, ASCII, optimized
pid        5348
Wed Apr 02 17:22:10 2008
kernel runs with dp version 234(ext=109) (@(#) DPLIB-INT-VERSION-234)
length of sys_adm_ext is 364 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 5348) [dpxxdisp.c   1245]
     shared lib "dw_xml.dll" version 150 successfully loaded
     shared lib "dw_xtc.dll" version 150 successfully loaded
     shared lib "dw_stl.dll" version 150 successfully loaded
     shared lib "dw_gui.dll" version 150 successfully loaded
     shared lib "dw_mdm.dll" version 150 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
Wed Apr 02 17:22:22 2008
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0100.qqq.nxst) took 12 seconds
Wed Apr 02 17:22:40 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 18 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5373]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >HOSTNAME_SID_01                      <
DpShMCreate: sizeof(wp_adm)          22968     (1044)
DpShMCreate: sizeof(tm_adm)          3642120     (18120)
DpShMCreate: sizeof(wp_ca_adm)          18000     (60)
DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm)          528048     (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm)          0     (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm)          0     (72)
DpShMCreate: sizeof(vmc_adm)          0     (1296)
DpShMCreate: sizeof(wall_adm)          (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm)     48
DpShMCreate: SHM_DP_ADM_KEY          (addr: 05560040, size: 4281040)
DpShMCreate: allocated sys_adm at 05560040
DpShMCreate: allocated wp_adm at 05561B30
DpShMCreate: allocated tm_adm_list at 055674E8
DpShMCreate: allocated tm_adm at 05567518
DpShMCreate: allocated wp_ca_adm at 058E0820
DpShMCreate: allocated appc_ca_adm at 058E4E70
DpShMCreate: allocated comm_adm at 058E65E0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 05967490
DpShMCreate: allocated gw_adm at 059674D0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 05967500
DpShMCreate: allocated wall_adm at 05967508
MBUF state OFF
DpCommInitTable: init table for 500 entries
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 2039 blocks reserved for free list.
ES initialized.
WARNING => System running without ICM - check rdisp/start_icman [dpxxdisp.c   12553]
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( HOSTNAME) [dpxxdisp.c   11867]
DpStartStopMsg: send start message (myname is >HOSTNAME_SID_01                      <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
DpMsgAdmin: Set patchno for this platform to 150
Release check o.K.
Wed Apr 02 17:23:20 2008
my types changed after wp death/restart 0x1f --> 0x1e
my types changed after wp death/restart 0x1e --> 0x1c
my types changed after wp death/restart 0x1c --> 0x18
my types changed after wp death/restart 0x18 --> 0x10
my types changed after wp death/restart 0x10 --> 0x0
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1477
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Apr 02 17:23:30 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long)               Wed Apr 02 11:53:30 2008
========================
No Ty. Pid      Status Cause Start Err Sem CPU    Time Program          Cl User         Action                    Table
0 DIA     6916 Ended         no      1   0        0
1 DIA     7724 Ended         no      1   0        0
2 DIA     6044 Ended         no      1   0        0
3 DIA     4300 Ended         no      1   0        0
4 DIA     6992 Ended         no      1   0        0
5 DIA     2412 Ended         no      1   0        0
6 DIA      432 Ended         no      1   0        0
7 DIA     8168 Ended         no      1   0        0
8 DIA     5420 Ended         no      1   0        0
9 DIA     9712 Ended         no      1   0        0
10 UPD     4320 Ended         no      1   0        0
11 ENQ     3476 Ended         no      1   0        0
12 BTC     2676 Ended         no      1   0        0
13 BTC     6816 Ended         no      1   0        0
14 BTC     9636 Ended         no      1   0        0
15 BTC     8356 Ended         no      1   0        0
16 BTC     7004 Ended         no      1   0        0
17 BTC     7284 Ended         no      1   0        0
18 BTC    10048 Ended         no      1   0        0
19 BTC     4560 Ended         no      1   0        0
20 BTC     4196 Ended         no      1   0        0
21 SPO     4268 Ended         no      1   0        0
Dispatcher Queue Statistics               Wed Apr 02 11:53:30 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
1
2000
1
1
--------++++--
+
DIA
3
3
2000
3
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id          7
wake_evt_udp_now     0
wake events           total     3, udp     3 (100%), shm     0 ( 0%)
since last update     total     3, udp     3 (100%), shm     0 ( 0%)
Dump of tm_adm structure:               Wed Apr 02 11:53:30 2008
=========================
Term    uid man user    term   lastop mod wp ta   a/i (modes)
Workprocess Comm. Area Blocks               Wed Apr 02 11:53:30 2008
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1477
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Apr 02 17:23:35 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >HOSTNAME_SID_01                      < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (1860) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:1860 HANDLE:1448)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1477
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Apr 02 17:23:36 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:1860 HANDLE:1448)
DpStartStopMsg: send stop message (myname is >HOSTNAME_SID_01                      <)
NiIMyHostName: hostname = 'HOSTNAME'
AdGetSelfIdentRecord: >                                                                           <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name                    -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name           MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 2 (r)
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Wed Apr 02 17:23:37 2008
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   12213]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 1356 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 1356 (pos=2)
SiSelNRemove: removed sock 1356
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: >                                                                           <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/22
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 9)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 1356
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 5348) [dpxxdisp.c   10461]
Good Bye .....
Please help me in resolving this issue
Thanks,
Vadi

Hi Suhas,
Have checked the hostname and it is correct.
I am getting the below output When i run r3trans -x
This is r3trans version 6.14 (release 700 - 04.03.08 - 16:43:00).
r3trans finished (0000).
I could see the below error message in dev_W21
ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'sid_shd' setuser 'sid_shd']
C sloledb.cpp [ExecuteAndFlush,line 6470]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 'cdu_shd' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
C Procname: [ExecuteAndFlush - no proc]
C setuser 'cdu_shd' failed -- connect terminated
C failed to establish conn. 0
Thanks,
Vadi

SCSM 2010 to 2012 Management server upgrade failed

I upgrading my scsm 2010 to 2012 both Management and DW server.
So i have set up the secondary lab environment and do this.
The DW server has been upgraded successfully to 2012.
When i try to upgrade SCSM Management server, at the finalizing stage, i get this error as _RegisterExtensionsDeferred
Log as below.
2014-08-26T14:48:28.7717429+05:30   Always:   Trace Session Started
02:48:28:
02:48:28:Application Started
02:48:28:This is 64-bit application.
02:48:28:Product ID is NOT installed
02:48:28:Found ProductID:{A193A8C7-CBE7-4F3B-887F-6B03EE43A208}, ProductName:Microsoft System Center Service Manager SP1, Version:7.0.6555.128
02:48:28:Found SMServer components
02:48:28:Found SMConsole components
02:48:28:Setup is running from: c:\SCSM2012\amd64\Setup
02:48:28:Using local Analysis server as default instance
02:48:28:Using 'DWASDataBase' as default Analysis server database name
02:48:28:Using 'Default' as default Analysis server database file path
02:48:29:Current UI culture (en-US) is not supported. Trying Neutral culture.
02:48:29:Found c:\SCSM2012\amd64\Setup\en\SCSM_license.rtf.
02:48:29:Current UI culture (en-US) is not supported. Trying Neutral culture.
02:48:29:Found c:\SCSM2012\amd64\Setup\en\SCSM_EvalLicense.rtf.
02:48:29:Current UI culture (en-US) is not supported. Trying Neutral culture.
02:48:29:Found c:\SCSM2012\amd64\Setup\en\PrerequisiteInputFile.xml.
02:48:29:Found c:\SCSM2012\amd64\Setup\Server\SM.msi.
02:48:29:All vital setup files found.
02:48:29:Upgrading Service Manager 7.0.6555 with 7.5.1561
02:48:29:Checking dependencies for Server upgrade...
02:48:40:Managment server is registered with Datawarehouse 'TESTSER'
02:48:42:Datawarehouse is up-to-date
02:48:42:Getting Management Group information from TESTSER:ServiceManagerNew
02:48:42:[GetManagementGroupPropertiesFromDB]: Opened the DB connection using Data Source=TESTSER;Initial Catalog=ServiceManagerNew;Integrated Security=True;Persist Security Info=False.
02:48:42:[GetManagementGroupPropertiesFromDB]: Found Management Group information.
02:48:42:[GetManagementGroupPropertiesFromDB]: Found Primary SDK server:..net.
02:48:42:Validating SmAdminRoleGroup
02:48:43:Checking MU OptIn state
02:48:43:MU is not opted in
02:48:43:Start adding DataItems
02:48:43:System Center Service Manager Install
02:48:44:Final Install Tasks
02:48:44:Done adding DataItems
02:48:46:Getting Domain List
02:49:35:LoadPrerequisites: Start adding ComponentTitles
02:49:35:LoadPrerequisites: Start adding DataItems
02:49:35:Memory check
02:49:36:Microsoft SQL Server 2008 Analysis Management Objects
02:49:36:Memory check
02:49:36:Processor speed check
02:49:36:Processor speed check
02:49:36:Processor speed check
02:49:36:IIS check
02:49:36:ASP.NET check
02:49:36:Basic Authentication check
02:49:36:Windows Authentication check
02:49:36:Microsoft .NET Framework 4 check
02:49:36:Windows Service Pack check
02:49:36:Microsoft Report Viewer Redistributable check
02:49:36:PowerShell 2.0 check
02:49:36:SharePoint Server 2010 check
02:49:36:SharePoint Farm Administrator check
02:49:36:SharePoint Server 2010 configuration check
02:49:36:ADO.NET Data Services Update check
02:49:36:Microsoft SQL Server 2008 Native Client check
02:49:36:Language Pack for SharePoint Server 2010 or SharePoint Foundation 2010 - English check
02:49:36:LoadPrerequisites: Done adding prerequisites checks
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking Memory check prereq.
02:49:36:CheckPrerequisites:        Logic Type:and   MemoryCheck-8gbWarn: 0
02:49:36:
02:49:36:CheckPrerequisites:    Memory check: Passed
02:49:36:
02:49:36:**************************************************
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking Microsoft SQL Server 2008 Analysis Management Objects prereq.
02:49:36:Entered RequiredAMO
02:49:36:Trying alternate method of detection using Assembly.Load
02:49:36:CheckPrerequisites:        Logic Type:and   AMO-err: 0
02:49:36:
02:49:36:CheckPrerequisites:    Microsoft SQL Server 2008 Analysis Management Objects: Passed
02:49:36:
02:49:36:**************************************************
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking Processor speed check prereq.
02:49:36:CheckPrerequisites:        Logic Type:and   ProcessorSpeedCheck2.5MHz-Warn: 0
02:49:36:CheckPrerequisites:        Logic Type:and   ProcessorCoreCheck2Core-Warn: 0
02:49:36:
02:49:36:CheckPrerequisites:    Processor speed check: Passed
02:49:36:
02:49:36:**************************************************
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking Windows Service Pack check prereq.
02:49:36:CheckPrerequisites:        Logic Type:and   Win2k8R2Sp1Check-Err: 0
02:49:36:CheckPrerequisites:
02:49:36:CheckPrerequisites:                ProductType was not a match. Looking for: LanmanNT Found: ServerNT
02:49:36:CheckPrerequisites:        Logic Type:or   Win2k8R2Sp1DCCheck-Err: 2
02:49:36:CheckPrerequisites:
02:49:36:CheckPrerequisites:                The value 6.1.7601.65536 was not within the range 6.2.0 to 9.9.9999.
02:49:36:CheckPrerequisites:        Logic Type:or   WinSrvrVNextCheck-Err: 2
02:49:36:CheckPrerequisites:
02:49:36:CheckPrerequisites:                ProductType was not a match. Looking for: LanmanNT Found: ServerNT
02:49:36:CheckPrerequisites:        Logic Type:or   WinSrvrVNextDCCheck-Err: 2
02:49:36:
02:49:36:CheckPrerequisites:    Windows Service Pack check: Passed
02:49:36:
02:49:36:**************************************************
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking Microsoft Report Viewer Redistributable check prereq.
02:49:36:Entered RequiredReportViewer
02:49:36:CheckPrerequisites:        Logic Type:and   RptVwrCheck-err: 0
02:49:36:
02:49:36:CheckPrerequisites:    Microsoft Report Viewer Redistributable check: Passed
02:49:36:
02:49:36:**************************************************
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking PowerShell 2.0 check prereq.
02:49:36:CheckPrerequisites:        Logic Type:and   PowerShell2Check-err: 0
02:49:36:CheckPrerequisites:        Logic Type:or   PowerShell2Check32-err: 0
02:49:36:
02:49:36:CheckPrerequisites:    PowerShell 2.0 check: Passed
02:49:36:
02:49:36:**************************************************
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking ADO.NET Data Services Update check prereq.
02:49:36:Loading System.Data.Services.Client, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
02:49:36:Found version 3.5.30729.5420
02:49:36:CheckPrerequisites:        Logic Type:and   ADODotNetDataServicesHotfix-err: 0
02:49:36:
02:49:36:CheckPrerequisites:    ADO.NET Data Services Update check: Passed
02:49:36:
02:49:36:**************************************************
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking Microsoft SQL Server 2008 Native Client check prereq.
02:49:36:CheckPrerequisites:        Logic Type:and   SQLNCLI10-err: 0
02:49:36:
02:49:36:CheckPrerequisites:    Microsoft SQL Server 2008 Native Client check: Passed
02:49:36:
02:49:36:**************************************************
02:49:37:CheckPrerequisites: Return Value 0
02:49:39:Doing Pre-Upgrade checks...
02:49:39:Validating database ServiceManagerNew on SQL Server TESTSER
02:49:39:Validating SQL Instance TESTSER
02:49:39:SQL Server: TESTSER
02:49:39:SQL Server version: 10.50.1600.1
02:49:39:Full text search installed: True
02:49:39:Checking if '\administrator' is Sysadmin Or (SecurityAdmin And DbCreator) on SQL Instance TESTSER
02:49:39:Stopping Service OMSDK on server
02:49:39:Starting Service OMSDK on server
02:49:41:Stopping Service OMCFG on server
02:49:44:Starting Service OMCFG on server
02:49:47:Validating Path C:\Program Files\Microsoft System Center\Service Manager 2010\
02:49:47:Checking for available free disck space
02:49:47:Checking directory write access
02:49:47:*** Pre-Upgrade checks passed ***
02:49:47:QuickFixEngineeringHandler: Unable to LoadQuickFixEngineeringFile.
02:49:47:SetProgressScreen: StartMinorStep.
02:49:47:statusUpdate: Resetting progress bar.
02:49:47:ProcessInstalls: Install Item System Center Service Manager Install has a Preprocessing delegate of SystemCenterServiceManagerPreinstallProcessor. Launching it now.
02:49:47:SetProgressScreen: Init MSI Install progress.
02:49:47:statusUpdate: Resetting progress bar.
02:49:47:LaunchMsi: Msi mutex is not in use.
02:49:47:LaunchMsi: MSI to launch is: c:\SCSM2012\amd64\Setup\Server\SM.msi.
02:49:47:LaunchMsi: Turning off the internal UI for c:\SCSM2012\amd64\Setup\Server\SM.msi.
02:49:47:LaunchMSI: Enable logging for the MSI at C:\Users\administrator.\AppData\Local\Temp\2\\SCSMInstall02.log.
02:49:47:LaunchMsi: MSI c:\SCSM2012\amd64\Setup\Server\SM.msi is not in silent mode. Setting the external UI.
02:49:47:LaunchMsi: Launching c:\SCSM2012\amd64\Setup\Server\SM.msi
02:49:52:statusUpdate: Resetting progress bar for MSI: MaxValue 58857
02:50:09:statusUpdate: Resetting progress bar for MSI: MaxValue 345710070
02:50:09:Install Progress - (ProcessComponents) Updating component registration
02:50:09:statusUpdate: Resetting progress bar for MSI: MaxValue 345710070
02:50:10:Install Progress - (StopServices) Stopping services
02:50:16:Install Progress - (_StopNamedServices_HealthService.80B659D9_F758_4E7D_B4FA_E53FC737DCC9) Stopping Health services
02:50:17:Install Progress - (RemoveODBC) Removing ODBC components
02:50:17:Install Progress - (RemoveFiles) Removing files
02:50:17:Install Progress - (CreateFolders) Creating folders
02:50:17:Install Progress - (InstallFiles) Copying new files
02:50:30:Install Progress - (_CreateDatabase) Creating Database
02:50:30:Install Progress - (_ExecuteSqlScripts) Configuring Database
02:52:07:Install Progress - (ExecuteSqlStrings) Executing SQL Strings
02:52:07:Install Progress - (CreateShortcuts) Creating shortcuts
02:52:07:Install Progress - (WriteRegistryValues) Writing system registry values
02:52:08:Install Progress - (_InstallServerPerfCounters.D2179E31_E456_401A_A820_CEBB135E3429) Installing Server Performance Counters
02:52:12:Install Progress - (WriteEnvironmentStrings) Updating environment strings
02:52:12:Install Progress - (_Rollback_UninstallBIDMOF.68918168_3885_4F75_BBF8_0CC84213F8D1) Rolling back BID MOF Installation
02:52:23:Install Progress - (GenerateScript) Generating script operations for action:
02:52:24:Install Progress - (_MPProcessorDeferred) Importing Management Packs
02:52:25:Install Progress - (_ExecuteSqlScripts) Configuring Database
02:52:26:Install Progress - (RegisterUser) Registering user
02:52:26:Install Progress - (RegisterProduct) Registering product
02:52:26:Install Progress - (PublishComponents) Publishing Qualified Components
02:52:26:Install Progress - (MsiPublishAssemblies) Publishing assembly information
02:52:26:Install Progress - (_ConfigureConfigService.D2179E31_E456_401A_A820_CEBB135E3429) Configure Config Service
02:52:26:Install Progress - (_CreateInstanceQualityRelationship) Creating Default Instances, Qualities And There Relationships
02:52:26:Install Progress - (PublishFeatures) Publishing product features
02:52:26:Install Progress - (_StartNamedServices_HealthService.80B659D9_F758_4E7D_B4FA_E53FC737DCC9) Restarting Health Service
02:52:26:Install Progress - (PublishProduct) Publishing product information
02:52:26:statusUpdate: Resetting progress bar for MSI: MaxValue 177276452
02:52:26:statusUpdate: Resetting progress bar for MSI: MaxValue 177276452
02:57:32:statusUpdate: Resetting progress bar for MSI: MaxValue 177276452
02:57:44:An error occurred while executing a custom action:_RegisterExtensionsDeferred
Upgrade failed after making permanent changes to this management server. A disaster recovery procedure will be necessary to rebuild this machine before attempting upgrade again. Consult the User Guide to determine which action to take next.
02:57:44:Install Progress - (Rollback) Rolling back action:
02:57:44:statusUpdate: Resetting progress bar for MSI: MaxValue 177276452
02:57:44:statusUpdate: Resetting progress bar for MSI: MaxValue 3
02:57:44:Install Progress - (Rollback) Rolling back action:
02:57:44:statusUpdate: Resetting progress bar for MSI: MaxValue 10525
02:58:43:MsiInstallProduct finished for msi c:\SCSM2012\amd64\Setup\Server\SM.msi.
02:58:43:LaunchMSI: Setting rollback to true
02:58:43:LaunchMSI: MSI c:\SCSM2012\amd64\Setup\Server\SM.msi returned error 1603:Fatal error during installation
02:58:43:ProcessInstalls: Install Item System Center Service Manager Install failed to install. We did not launch the post process delegate.
02:58:43:SetProgressScreen: FinishMinorStep.
regards Sundaresan.C

Jeremiah,
We ran into this as well. One of two options:
1.) Just run a repair on the SQL Server installation
2.) Repair the WMI settings on the SQL Server as descibed here:
http://social.technet.microsoft.com/Forums/en-US/systemcenterservicemanager/thread/2a91d03e-a685-495e-89ac-a591ec5871f6/
bb

Repository upgrade fails 11.1.0.7 db -10.2.0.5 GC patchset

Installing GridControl 10.2.0.5 on Windows 2003 Server SP2. Initial install successful of 10.2.0.2 using existing database 11.1.0.7. The database was created new to use for GC. Patchset no problems until Configuration Assitant step "Repository Upgrade" failed with errors:
rem Copyright (c) 1999, 2009, Oracle. All rights reserved.
oracle.sysman.emcp.oms.RepositoryPatchUpgrade -verbose
oracle.sysman.emcp.oms.OmsPatchUpgrade -configureOms
oracle.sysman.emcp.aggregates.ConfigPlugIn
oracle.sysman.emcp.oms.StartOMS -configureOms
oracle.sysman.emcp.oms.EMCLISetup
oracle.sysman.ccr.configCCR.ConfigCCRPlugIn
oracle.sysman.ccr.configCCR.ConfigRepeaterPlugIn
Tried to find cause of errors and cannot seem to understand why this step failed.
Considering uninstalling GC and Oracle 11g and reinstalling GC with "new database" option.
Anyone successful at installing GC 10.2.0.5 with an 11g database?
Thank you,
Curt Swartzlander
DBA

pasinc wrote:
Can anyone help me figure out why the domU is just hanging/blocked?It's not hanging (blocked just means it doesn't need the CPU) -- it's just switched into a graphic mode that the console view can't display. You can either VNC into the guest, or change the kernel boot parameters by removing rhgb quiet and replacing them with console=xvc0 -- this should allow you to see the full boot process and answer the first-boot interview questions without using VNC.
You can get the VNC details by running: virsh dumpxml <domain ID> and you can get the domain ID from the xm list output.

Latest Anyconnect Upgrade Fails?

Similar Messages

Maybe you are looking for