Latest backup not available
hello,
i´m running 9.2.0.4.0 without catalog.
my problem: the latest backup from 2006/03/09 (which is shown by "list backup") is not available (deleted), but i have one from 2006/03/07 - which is NOT shown by "list backup", so i don´t have the tag of the backupset.
do i have a chance to restore the db?
thanks in advance!
How can you be sure that you have the backup from 2006/03/07? Is the backup from 2006/03/09 in the list of the output of "list backup"? It is marked as expired? Did you execute a crosscheck?
Usually, it the backupset is not registered in the controlfile you are not able to restore from this backup. However, you can try to register it using the CATALOG command.
Bye, Aron
Similar Messages
-
I would like to upgrade my OS from 10.6.8. I can't find any higher version on the site. Yosemite is the latest but not available. Can someone help please?
If Yosemite is not available to you, your system may not meet the minimum requirements.
How to install OS X Yosemite on your Mac - Apple Support -
Time Machine "Latest Backup" not showing up
I am using a Western Digital 1TB Mybook as a TM Backup on my G5. It has been connected since October 2008 and still has 163Gb of free space. It is still backing up hourly and when I enter TM I can access all backups.
However, when I click on the TM icon in the menu bar, it shows "Latest Backup: --" so I can't quickly scan up there to see when it last backed up.
I've run Onyx and TTools on the G5.
Any thoughts?
SteveSounds like a corrupted preference file to me!
Before doing anything after this line, make a note of any exclusions you've made in TM's preference pane.
In Finder, click on "Macintosh HD" then Library then Preferences. Find the file com.apple.TimeMachine.plist and move it to the desktop or delete it. Log out of your account & back into it or restart the computer.
See if things work properly after that.
~Lyssa -
RV016 V3 vs RV082 V3 VPN Tunnel Backup not available on RV016
VPN tunnel backup is not available on the RV016 firmware version 4.0.2.08 (it IS on the RV082. The data sheet and the manual for the RV016 is wrong. I have purchased several RV016 hardware V3 and several RV082 hardware V3. Both have the same current firmware version. We have noted that the RV016 does not have the VPN tunnel failover option found in the RV082. It also does not have split DNS (noted in the manual. A I would have thought that the firmware would provide equal options on the RV042, RV082, and RV016. Good job, Cisco!
We did not have VPN back up with the V1 RV016, either. Also tried V2 and at the time it was not working. The product that we have found works as expected is the Peplink Balance. There is still a few second delay on failover, but if you have two broadband connections, it is imperceptible. We gave up on the Cisco products.
-
Time Machine backups not available on new MBP
Okay, I've had issues with an early 2011 15" MBP that I've had for a couple years. I was replacing it today. Did a backup last night (to a LaCie FW800 external drive). Brought the new MBP home today (2.4 GHz i7 Retina). I try to migrate during initial setup. It doesn't see my backup drive (via USB). I call Apple. Create new acct. and migrate. Still can't see the drive. I try plugging the drive into my Airport Extreme. Migration Asst. sees the drive but says there are no backups on it. I go into Recovery Mode, it sees 2 out of 8 backups, latest one being 18 days ago. Apple tech tells me to not use it due to it being a 10.8.2 backup on an old machine. I run out and get a FW to Thunderbolt adapter with the hopes of success. No success. I'm totally stumped. Googling isn't helping and neither is the senior tech I've been talking to.
A few notes.
In TM, it sees the old backups, but they appear as black windows that I can't click on
I tried putting the backup drive into a new enclosure. Same result.
I would rather avoid a clean install of everything or a manual migration. Any ideas before I do one of these things?Ah, good. Connect it directly to your Mac.
Open the drive with the Finder. You should see only a single Backups.backupdb folder at the top level of the drive. If not, what do you see?
The Time Machine browser (the "Star Wars" display) normally only shows the backups of the Mac it's running on. You should be able to see the backups from the old Mac via the Browse Other Backup Disks, per the green box in #E2 of Time Machine - Troubleshooting.
But Migration Assistant should see them (that's what it's for!).
Does it show anything at all on this window?
If not, the backups may be damaged. Try Repairing them, per #A5 in Time Machine - Troubleshooting. -
Why latest firmware not available for my region?.....
I have nokia N70 music edition and my firmware version is 5.0705.3.0.1 RM84. This is the latest vesion available for my region. But for europe the firmware version is 5.0737.3.0.1. My google search result, it is possible to instal the 5.0735 version in mobile also, then why nokia is not ready to give the OS for online upgradation......
I found another mobile which is brought from asia region with europe firmware.... Its working great speed.Hi Chiste,
I don't think Creative Cloud Membership is available at all in Peru based on the Creative Cloud Membership FAQ.
http://www.adobe.com/products/creativecloud/faq.html
See the question
In what countries can I buy a membership to Creative Cloud?
Also
Creative Cloud isn’t available where I live. When will it become available?
We intend to make Creative Cloud as widely available as possible. Adobe will share more details about country availability over time.
-Dave -
Flash internal update server, latest version not available
Following the 'Background updates from an internal server' section of the Flash 11.3 Deployment Guide, I have setup an internal Flash update server which sucessfully updates previous versions of 11.2 to 11.2.202.235 but refuses to take the brave step to 11.3. The guide tells me to copy files from these locations -
https://fpdownload2.macromedia.com/pub/flashplayer/update/current/sau/11/xml/version.xml
http://fpdownload2.macromedia.com/pub/flashplayer/update/current/sau/11/install/install_al l_win_ax_sgn.z
http://fpdownload2.macromedia.com/pub/flashplayer/update/current/sau/11/install/install_al l_win_pl_sgn.z
http://fpdownload2.macromedia.com/pub/flashplayer/update/current/sau/11/install/install_al l_win_64_ax_sgn.z
http://fpdownload2.macromedia.com/pub/flashplayer/update/current/sau/11/install/install_al l_win_64_pl_sgn.z
After looking at the version.xml file it seems that version of the ActiveX Flash is 11.2.202.235 whereas if I download the normal way I get the latest 11.3.300.257 which kind of makes the whole internal server auto update thing a little pointless! Feel free to correct me if I have gone wrong somewhere up there but I have a feeling Adobe is being a little slack!
Cheers
KevNow the version.xml file is pointing to the below but the latest release is 11.8.800.94
<version>
<ActiveX major="11" minor="7" buildMajor="700" buildMinor="224"/>
<Plugin major="11" minor="7" buildMajor="700" buildMinor="224"/>
<MacPlugin major="11" minor="7" buildMajor="700" buildMinor="225"/>
<SAUConfig checkFrequency="1"/>
</version>
Why adobe is not keeping up-to-date with the latest version ?? Is there any other server or method to get the latest version ??
Reference:
https://fpdownload2.macromedia.com/pub/flashplayer/update/current/sau/11/xml/version.xml
https://fpdownload.macromedia.com/pub/flashplayer/update/current/sau/11/xml/version.xml
Thanks,
ThenralMani -
Older Time Machine backups not available in Mountain Lion?
My wife relies heavily on Time Machine to restore old files that have been deleted or previous versions of a file. Recently I upgraded her Mac OS from Snow Leopard to Mountain Lion. Today she discovered that she is unable to search and/or restore files from any point before the upgrade to Mountain Lion, although she can see dates along the timeline that indicate that there are backups present. She has backups going back almost 3 years now, so this is a pretty serious potential loss. Is there a work around for this? If not, we'll have to roll back to her Snow Leopard OS from theTime Machine. Just FYI, her system specs are: iMac (24-inch Mid 2007) Mac OS 10.8.x 3GB RAM
https://discussions.apple.com/docs/DOC-4055
-
Hello,
Based on this website:
http://www.adobe.com/software/flash/about/
Platform
Browser
Player version
Windows
Internet Explorer (and other browsers that support Internet Explorer ActiveX controls and plug-ins)
10.2.152.22
Windows
Firefox, Mozilla, Netscape, Opera (and other plugin-based browsers)
10.2.152.22
Macintosh - OS X
Firefox, Opera, Safari
10.2.152.22
Linux
Mozilla, Firefox, SeaMonkey
10.2.152.22
Windows, Macintosh - OS X, Linux
Chrome
10.2.152.22
Solaris
Mozilla
10.2.152.22
10.2.152.22 version of flash player is out for all platforms, yet if one tries to install adobe flash through adobe website, it still installs 10.1.102.64. In other words, one cannot download 10.2.152.22 anywhere on the site even though its listed as latest version released for all platforms. Even adobe manual file download site: http://www.adobe.com/products/flashplayer/fp_distribution3.html only had 10.1.102.64.... Someone must of made a mistake...Hi, The 10.2 is the Flash Player beta version and the latest that I have seen is the update of 1/29/11 to 10.2.152.14.
Either this came out of beta and is a released version or like you say, someone made a mistake. All download links and other links still have the latest released version as 10.1.102.64
Even the beta website is showing vs 10.2.152.14:
http://labs.adobe.com/technologies/flashplayer10/
Until this is cleared up, and the download links are changed, Flash Player released version will remain 10.1.102.64.
Thanks,
eidnolb -
Time Machine backups not available after Lion upgrade
I just upgraded from Snow Leopard to Lion a week ago. Today I went to my Time Machine (backups on a Time Capsule), and can't access old files. Past dates are shown in purple, with dates since the Lion update in the usual gray. However, none of them show any files. Any ideas?
https://discussions.apple.com/docs/DOC-4055
-
DB12 last successful back up not available
Hi, i am having problem with backup in our quality system.
Orcale :10g
sap ecc6.0
we are taking online backup every monday, wednesday, thursday. DB12- last successful backup not available
overview of redo log files not yet backed up 300.
sapqas:orabqs 3> pwd
/oracle/BQS/102_64/dbs
sapqas:orabqs 4> ls
agent.lic initBQS.sap
dsmerror.log initBQS.sap.040107
hc_BQS.dat initBQS.sap.backup040407
init.ora initBQS.utl
initBQS.000 initBQS.utl.old
initBQS.001 initBQS2703.sap
initBQS.002 initdw.ora
initBQS.1.ora initoraBQS.bki.old
initBQS.2.ora initoraBQS.utl.old
initBQS.bki initorabqs.bki.old
initBQS.bki.cms initorabqs.utl.backup030407
initBQS.bki.old initorabqs.utl.old
initBQS.dba lkBQS
initBQS.ora orapwBQS
initBQS.ora.SAPINST-ORIG spfileBQS.ora
sapqas:orabqs 5> more initBQS.sap
@(#) $Id: //bas/700_REL/src/ccm/rsbr/initAIX.sap#5 $ SAP
SAP backup sample profile. #
The parameter syntax is the same as for init.ora parameters. #
Enclose parameter values which consist of more than one symbol in #
double quotes. #
After any symbol, parameter definition can be continued on the next #
line. #
A parameter value list should be enclosed in parentheses, the list #
items should be delimited by commas. #
There can be any number of white spaces (blanks, tabs and new lines) #
between symbols in parameter definition. #
backup mode [all | all_data | full | incr | sap_dir | ora_dir
| all_dir | <tablespace_name> | <file_id> | <file_id1>-<file_id2>
| <generic_path> | (<object_list>)]
default: all
backup_mode = all
restore mode [all | all_data | full | incr | incr_only | incr_full
| incr_all | <tablespace_name> | <file_id> | <file_id1>-<file_id2>
| <generic_path> | (<object_list>) | partial | non_db
redirection with '=' is not supported here - use option '-m' instead
default: all
restore_mode = all
backup type [offline | offline_force | offline_standby | offline_split
| offline_mirror | offline_stop | online | online_cons | online_split
| online_mirror
default: offline
backup_type = online_cons
#backup_type = offline_force
backup device type
[tape | tape_auto | tape_box | pipe | pipe_auto | pipe_box | disk
| disk_copy | disk_standby | stage | stage_copy | stage_standby
| util_file | util_file_online | rman_util | rman_disk | rman_stage
| rman_prep]
default: tape
backup_dev_type = tape
#backup_dev_type = util_file
#backup_dev_type = util_file
backup root directory [<path_name> | (<path_name_list>)]
default: $SAPDATA_HOME/sapbackup
backup_root_dir = /oracle/BQS/sapbackup
stage root directory [<path_name> | (<path_name_list>)]
default: value of the backup_root_dir parameter
stage_root_dir = /oracle/BQS/sapbackup
compression flag [no | yes | hardware | only]
default: no
compress = no
compress command
first $-character is replaced by the source file name
second $-character is replaced by the target file name
<target_file_name> = <source_file_name>.Z
for compress command the -c option must be set
recommended setting for brbackup -k only run:
"compress -b 12 -c $ > $"
no default
compress_cmd = "compress -c $ > $"
uncompress command
first $-character is replaced by the source file name
second $-character is replaced by the target file name
<source_file_name> = <target_file_name>.Z
for uncompress command the -c option must be set
no default
uncompress_cmd = "uncompress -c $ > $"
directory for compression [<path_name> | (<path_name_list>)]
default: value of the backup_root_dir parameter
compress_dir = /oracle/BQS/sapreorg
brarchive function [save | second_copy | double_save | save_delete
| second_copy_delete | double_save_delete | copy_save
| copy_delete_save | delete_saved | delete_copied]
default: save
archive_function = save_delete
directory for archive log copies to disk
default: first value of the backup_root_dir parameter
archive_copy_dir = /oracle/BQS/saparch
directory for archive log copies to stage
default: first value of the stage_root_dir parameter
archive_stage_dir = /oracle/BQS/sapbackup
delete archive logs from duplex destination [only | no | yes | check]
default: only
archive_dupl_del = only
new sapdata home directory for disk_copy | disk_standby
no default
new_db_home = /oracle/C11
stage sapdata home directory for stage_copy | stage_standby
default: value of the new_db_home parameter
stage_db_home = /oracle/C11
original sapdata home directory for split mirror disk backup
no default
orig_db_home = /oracle/C11
remote host name
no default
remote_host = <host_name>
remote user name
default: current operating system user
remote_user = <user_name>
tape copy command [cpio | cpio_gnu | dd | dd_gnu | rman | rman_gnu
rman_dd | rman_dd_gnu]
default: cpio
tape_copy_cmd = dd
disk copy command [copy | copy_gnu | dd | dd_gnu | rman | rman_gnu]
default: copy
disk_copy_cmd = copy
stage copy command [rcp | scp | ftp]
default: rcp
stage_copy_cmd = rcp
pipe copy command [rsh | ssh]
default: rsh
pipe_copy_cmd = rsh
flags for cpio output command
default: -ovB
cpio_flags = -ovB
flags for cpio input command
default: -iuvB
cpio_in_flags = -iuvB
flags for cpio command for copy of directories to disk
default: -pdcu
use flags -pdu for gnu tools
cpio_disk_flags = -pdcu
flags for dd output command
default: "obs=16k"
recommended setting:
Unix: "obs=nk bs=nk", example: "obs=64k bs=64k"
Windows: "bs=nk", example: "bs=64k"
dd_flags = "obs=64k bs=64k"
flags for dd input command
default: "ibs=16k"
recommended setting:
Unix: "ibs=nk bs=nk", example: "ibs=64k bs=64k"
Windows: "bs=nk", example: "bs=64k"
dd_in_flags = "ibs=64k bs=64k"
number of members in RMAN save sets [ 1 | 2 | 3 | 4 | tsp | all ]
default: 1
saveset_members = 1
additional parameters for RMAN
rman_channels and rman_filesperset are only used when rman_util,
rman_disk or rman_stage
rman_channels defines the number of parallel sbt channel allocations
rman_filesperset = 0 means:
one file per save set - for non-incremental backups
all files in one save set - for incremental backups
the others have the same meaning as for native RMAN
rman_channels = 1
rman_filesperset = 0
rman_maxpiecesize = 0 # in KB - former name rman_kbytes
rman_rate = 0 # in KB - former name rman_readrate
rman_maxopenfiles = 0
rman_maxsetsize = 0 # in KB - former name rman_setsize
additional parameters for RMAN version 8.1
the parameters have the same meaning as for native RMAN
rman_diskratio = 0 # deprecated in Oracle 10g
rman_pool = 0
rman_copies = 0 | 1 | 2 | 3 | 4 # former name rman_duplex
rman_proxy = no | yes | only
special parameters for an external backup library, example:
rman_parms = "BLKSIZE=65536 ENV=(BACKUP_SERVER=HOSTNAME)"
rman_send = "'<command>'"
rman_send = ("channel sbt_1 '<command1>' parms='<parameters1>'",
"channel sbt_2 '<command2>' parms='<parameters2>'")
remote copy-out command (backup_dev_type = pipe)
$-character is replaced by current device address
no default
in oracle/sid/sapbackup folder i found one file bdxwbpsz.ant that was created on May 7th 2008( Wednesday)
plz check this:
sapqas:orabqs 21> more bdxwbpsz.ant
BR0051I BRBACKUP 7.00 (24)
BR0055I Start of database backup: bdxwbpsz.ant 2008-05-07 01.04.17
BR0484I BRBACKUP log file: /oracle/BQS/sapbackup/bdxwbpsz.ant
BR0477I Oracle pfile /oracle/BQS/102_64/dbs/initBQS.ora created from spfile /ora
cle/BQS/102_64/dbs/spfileBQS.ora
BR0280I BRBACKUP time stamp: 2008-05-07 01.04.18
BR0319I Control file copy created: /oracle/BQS/sapbackup/cntrlBQS.dbf 46383104
BR0101I Parameters
Name Value
oracle_sid BQS
oracle_home /oracle/BQS/102_64
oracle_profile /oracle/BQS/102_64/dbs/initBQS.ora
sapdata_home /oracle/BQS
sap_profile /oracle/BQS/102_64/dbs/initBQS.sap
backup_mode ALL
backup_type online
backup_dev_type tape
compress no
tape_copy_cmd dd
cpio_flags -ovB
cpio_in_flags -iuvB
dd_flags obs=64k bs=64k
dd_in_flags ibs=64k bs=64k
rewind tctl -f $ rewind
rewind_offline tctl -f $ offline
tape_size 307200.000 MB
tape_address /dev/rmt0.1
tape_address_rew /dev/rmt0
volume_backup BQSB29
expir_period 0
tape_use_count 100
exec_parallel 0
system_info bqsadm/orabqs sapqas AIX 3 5 00C0799E4C00
oracle_info BQS 10.2.0.2.0 8192 2370 485914644 sapqas WE8DEC
UTF8
sap_info 700 SAPSR3 0002LK0003BQS0011V18391775040013NetWea
ver_ORA
make_info rs6000_64 OCI_102 Mar 3 2007
command_line brbackup -u / -jid ALLOG20080507010416 -c force -
t online -m all -p initBQS.sap -v BQSB29 -a -c force -p initBQS.sap -sd
BR0116I ARCHIVE LOG LIST before backup for database instance BQS
Parameter Value
Database log mode Archive Mode
Automatic archival Enabled
Archive destination /oracle/BQS/oraarch/BQSarch
Archive format %t_%s_%r.dbf
Oldest online log sequence 2367
Next log sequence to archive 2370
bdxwbpsz.ant (6%)
plz suggest how can I take online backup and redo log backup.Hi Shrinivas,
Are you taking backup from the local tape device or from 3rd party software.
I cannot clearly what is the exact problem, Your saying either Db12 the status is mot shown then asking for how to take the backup.
If a backup device is properly configured in the system, then you can take online and offline backup by scheduling in the DB13 tcode.
Pls state the exact problems so that it is easy to provide the solution.
Regards,
Maheswaran -
Time Machine does not display Oldest or Latest Backup details
I had previously posted this but had no luck (or replies)...
Shortly after the most recent Time Capsule software update, I had an issue where Time Machine stopped working. I was getting a"Backup volume cannot be found" message.
As per Apple's instructions to remedy this, "Time Capsule: Time Machine backups do not mount" (http://support.apple.com/kb/HT1170), I re-named my Time Capsule to a shorter name.
Shortly afterward, I noticed that details were missing for "Latest Backup" when I'd click the Time Machine icon in my menu bar. All that is displayed in this field is " -- ". I have also noticed that when I open the Time Machine Preferences window, the details are missing from the following fields: "Available", "Oldest Backup", & "Latest Backup". (However, when a backup is in progress, space details are shown in the "Available" field.)
I expect the missing details have something to do with changing the name of the Time Capsule, but have no idea how to fix this... Please help.Installed Snow Leopard, and, for whatever reason the missing details are now there. Yay.
-
Time Machine unable to backup. "Backup disk not available"
I have been having issues backing up to Time Capsule for a few weeks. I keep getting error messages. The latest backup attempt was 'delayed'. When I clcik to see why, it says "The backup disk not available". It says the last successful backup was at 8:00 PM tonight, but that doesn't seem to make sense since it says it was delayed.
Are there steps I can take to try and resolve this?
ThanksI have consistantly had this problem.
Time Machine could not complete the backup.
The backup disk could not be found.
Make sure the backup disk is connected or open the Time Machine preferences to select a different backup disk.
If I unplug it and plug it back in it will probably work, although I have had to totally start from scratch a couple times to get it working.
Is this a DHCP issue or how can I avoid this in the future?
Thanks, -
Time Capsule cannot complete the backup, backup disk not available. Help please!
Hi,
I've only ever been able to complete one back up using my time capsule and have been having problems for months! I've tried resetting and restarting the TC, it re-installs successfully and the green light comes onto the TC. However, when I try to backup I get the following message:
Time Capsule cannot complete the backup. The backup disk is not available.
I've tried taking it into the Apple store to the genius bar and they seem to think it is working fine. It seems to have connected successfully to my network at home so I'm struggling to work out what to do. Does anyone have any ideas?
Thanks.Have you updated to the latest Time capsule firmware?
AirPort Utility software and firmware downloads -
I'm not completely tech savvy, but I'm having troubles with my external memory & time machine. I'm a student, and thus its very important to me to be able to back up my computer.
I wanted to back up my Time Machine the other day. I clicked the icon at the top of the page (beside the battery icon, etc.) and the message "The backup disk is not available". I have a 500GB Seagate passport (ie: http://www.bestbuy.com/site/Seagate---FreeAgent-GoFlex-500GB-External-USB-2.0-Po rtable-Hard-Drive---Silver/9929098.p?id=1218196478444&skuId=9929098)
My macbook pro is version 10.7.5 Mac OS X Lion. My external memory is only about a year old. It hasn't been dropped or anything; it permanently sits secured to my desk.
What appears when I click "Repair Disk":
Verify and Repair volume “Time Machine Backups”
Checking file systemChecking Journaled HFS Plus volume.
Detected a case-sensitive volume.
Checking extents overflow file.
Checking catalog file.
Incorrect block count for file shutdown_time
(It should be 1 instead of 0)
Invalid node structure
Rebuilding catalog B-tree.
The volume Time Machine Backups could not be repaired.
Volume repair complete.Updating boot support partitions for the volume as required.Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
After clicking "Repair Disk" this message pops up: "Disk Utility Stopped Repairing 'Time Machine Backups' Disk utility can't repair this disk. Back up as many as your files as possible, reformat the disk, and restore your backed-up files."
I don't want to wipe my memory on my external disk just in case the disk doesn't restore (as I do not have another disk to back up my computer on to).
What is going on? Why is this happening out of the blue? How can I fix this?Sounds like it either has, or is about to die.
If you don't need anything off the old drive, then yes, replace it immediately with something a little more reolaable. I use WD Caviar Black personally. But anything that has a known low failure rate.
Maybe you are looking for
-
I would like to list the user´s address book details (name and number of each contact) in my app. The user would then choose a contact and my app would send an sms. Is it possible to access a device´s address book with flash lite? If yes, how?
-
How can I connect to the database using the Oracle Remote Diagnostic Agent?
Now I try to study RDA on Windows XP platform,when I run 'rda.cmd',there is a question 'Enter password for 'SYSTEM@'',what is the answer? Because I didn't know how to connect to database,there are many error messages - RDA-00510: SQL execution disabl
-
Officejet 6500 wireless printer won't scan in Windows 8.1
My 6500 won't scan. I read in my Windows 8.1 for dummies that it may be too old. I purchased it in the summer of 2010. After I plugged my printer into my new Windows 8.1, I performed a 'test' through a wizard that claimed 'scan successful' but I hav
-
Is there a way I can manually change the order of icons in the menu bar at the top of the screen?
-
Photos dont show in Album on Phone
I have loaded iOs 5 then have gone throug the set up for iCloud but i cant find any photos taken since the upgrade. There is no album on icloud either. Any tips?