Latest Best pactices baseline package of Japan

Dear All,
    We would like to know latest　Best pactices baseline package of Japan. (V1.604?)
    Moreover, we would like to also know the schedule of the next version.
Regards,
   Gaito

Hello Marcous,
the material numbers of the dvds for baseline France are: 50098552 (documentation) and 51038439 (config).
For obtaining the best practices please see the instruction under the following link:
[url]http://help.sap.com/bp_bl604/BL_FR/html/index.htm[url]
On page 3 you can find the following:
"SAP Software Distribution Center on the SAP Service Marketplace (http://service.sap.com/swdc)
or order via their contracts department. SAP Best Practices are provided free of charge"
So in your case you should contact your contract department.
Cheers,
Andreas

Similar Messages

Help: Best Practice Baseline Package experience

All,
Can I ask for some feedback from folks who've used the Best Practice Baseline package before - I'm in a project implementing ECC 6.0 and we're planning to use this package to quickly set up and demo the system to the business. I've limited experience in config and system setup so your advice is much appreciated
Specifically my questions:
1. Has anyone used the package for a similar purpose (quick setup to demo to business)? Does it save a lot of time or should our team just configure the system manually? Are there pitfalls I should be aware of?
2. I understand a limited amount of config / master data customisation can be done and there's even a wizard. Is it effective and error-free - i.e., will I be better off by installing the base package and make changes later manually ?
3. Assuming after the demo we have firmed business requirements, which approach would be faster and easier? Configuring from scratch vs. using existing BP baseline then doing delta configuration?
4. Does the documentation tell me exactly what was configured and the settings used?
Appreciate any help and insight you can offer, thanks!!

Dear Jin,
The following help link should answer your queries:
http://help.sap.com/bp_grcv152/GRC_US/Documentation/SAP_APJ_BP_Study_2006_CS.ppt#418,1,Slide of SAP Best Practice
Regardes,
Naveen.

Install The ERP SAP Best Practices Baseline Package (VE)

Hello
We would like to install The ERP SAP Best Practices Baseline Package (VE)
And reviewing the Quick Guide to Installing the SAP Best Practices Baseline Package (VE), included in the SAP NOTE 1171816, in the list of components installed we need SAP ERP 6.0 with EhP3 with support package stack 1, but we received the installation disc of the Ehp4, and this version is not supported for the Baseline Package (VE).
We are unable to find the installation the disc, or the media list for this solution (SAP ECC 6.0 EhP3).
Can somebody tell me where can i find this?
The information in the service.sap.com/instguides is about installing EhP4.
We are using Windows 2008 EE with MS-SQL 2005.
Thanks for your Help

Hello Sunny,
I hava setup MOPZ, and uploaded the correct packages to the SAINT transaction, but it gives me a warning, i need to include the following files to my upgrade queue:
EA-APPL, 603       SAPK-603DHINEAAPPL   (SP Level: 0001)
FINBASIS, 603      SAPK-60301INFINBASIS (SP Level: 0001)
EA-PS, 603           SAPK-603DHINEAPS     (SP Level: 0001)
SEM-BW, 603        SAPK-60301INSEMBW    (SP Level: 0001)
I downloaded the packagesfrom SWDC but still is missing EA-PS, 603 SAPK-603DHINEAPS the file i downloaded was CSN0120061532_0028760.PAT
In the SAP Note 1083533
"If you receive the warning stating that additional Support
Packages (level 0001) must be included in the installation of
Enhancement Package 3, check the Support Package level of the
relevant component. You can ignore the warning in the following
cases:
All components (Release 600) except EA-HR 600: Support Package
level 0011
EA-HR 600: Support Package level 0026
- Note the following: In the case of a higher Support Package
level (at least Support Package level 0012 or Support Package
level 0026 for EA-HR), you must NOT ignore this warning."
My SP level is 11 for all components and EA-HR is lvl 22, should i ignore this?
Kind Regards

[More information] 'SAP Best Practices Baseline package for Brazil V3.607'

Hi.
When I study 'SAP Best Practices Baseline package for
Brazil V3.607', I wonder somthing.
I want solution of problem.
---------Problem---------
In '100: SAP Best Practices Installation' document on point 3.4 Define Tax Jurisdiction Code it says
Enter the Jurisdiction Codes according to the document SMB41_J_1BTXJURV_B020_NFE.TXT.
I have search the internet for this document and the only hit is the actual Best practice document.
Does anybody knows where to get this document?
ASAP, reply for me.
Thanks.

Dear Dimitry,
the Best Practice baseline content is freely available to anyone w/o any charge.
You find the whole content about it at:
SAP Best Practices package for Russia V3.607 (English)
SAP Best Practices package for Russia V3.607 (Russian)
Kind Regards,
Jan

Install Best Practices- Baseline Package for ECC 6.0 EHP4

Hi All,
I know its not the right forum to post this message, but posting here as i didnt get the info from the related forum, apologies for that.
Now we are planning to install SAP Best practices-Baseline Packages for ECC-EHP4 in our new server.
Can anybody help me out what are the steps to be carried out. Now we have completed installation of Linux & we want to install BP for General, not for any specific industry.
B/regds,
CB

Please post this question in SAP Basis Forum.
Alternatively, you can check documents in scribd/ help.sap.com
Raghavan

Importing best practices baseline package (IT) ECC 6.0

Hello
I hope is the right forum,
i've a sap release ECC 6.00 with stack abap 14.
In this release i have to install the preconfigured smartforms that now are called
best practices baseline package. These pacakges are localized and mine is for Italy:
SAP Best Practices Baseline Package (IT)
the documents about the installation say that the required support package level has to be with stack 10.
And it says :
"For cases when the support package levels do not match the Best Practices requirements, especially when HIGHER support package levels are implemented, only LIMITED SUPPORT can be granted"
Note 1044256
By your experience , is it possible to do this installation in this support package condition?
Thanks
Regards
Nicola Blasi

Hy
a company wants to implement the preconfigured smartforms in a landscape ECC 6.0
I think that these smartforms can be implement using the SAP best practices , in particular the baseline package ....see service.sap.com/bestpractices --> baseline package; once installed you can configured the scenario you want....
the package to download is different each other ,depends the localization...for example italy or other country but this is not important at the moment....
the problem is the note 1044256...it says that to implement this, i must have the support package level requested in this note...not lower and above all not higher.......
before starting with this "baseline package" installation i'd like to know if i can do it because i have a SP level of 14 for aba e basis for example....while the notes says that want a SP level of 10 for aba e basis.
what i can do?
i hope is clear now....let me know
thanks
Nicola

SAP Best Practices baseline package for France on dvd

Hello guys
Can someone tell me what's the material number of the dvd documentation of SAP Best practicse baseline package for France and how to ordre it. I did not find it on sap shop and I cannot download it due to the quality of the internet connexion in the region where I m located. I mean, the documentation like the one you have on this sap marketplace website.
Tks for your help.
Marcous

Hello Marcous,
the material numbers of the dvds for baseline France are: 50098552 (documentation) and 51038439 (config).
For obtaining the best practices please see the instruction under the following link:
[url]http://help.sap.com/bp_bl604/BL_FR/html/index.htm[url]
On page 3 you can find the following:
"SAP Software Distribution Center on the SAP Service Marketplace (http://service.sap.com/swdc)
or order via their contracts department. SAP Best Practices are provided free of charge"
So in your case you should contact your contract department.
Cheers,
Andreas

SAP Best Practices Baseline package for Russia V3.607

Dear colleagues,
My partner - BearingPoint Russia - has an interest to SAP Best Practices Baseline package for Russia V3.607
Would you please help to find the contact whom they can ask the questions about content & price to?
Best regards,
Dmitry Popov

Dear Dimitry,
the Best Practice baseline content is freely available to anyone w/o any charge.
You find the whole content about it at:
SAP Best Practices package for Russia V3.607 (English)
SAP Best Practices package for Russia V3.607 (Russian)
Kind Regards,
Jan

Help on Installing the SAP Best Practices Baseline Package

We are in the process of installing the SAP Best Practices Baseline Package. We are on ECC5.0. Any tips/ tricks/ gotchas will be greatly appreciated.

hi Mani,
check this out:
http://help.sap.com/bp_bblibrary/500/documentation/BL_Quick_Guide_EN_DE.doc
regards
sham'm

BASELINE PACKAGE - V1-V2.603 and Best Practices for Pharmaceuticals

Hi All,
         > Recently we have upgraded to EHP4 stack 4
         > I am trying to install BASELINE PACKAGE - V1-V2.603 I chose that because its localized for India.
         > When i am trying to install BP-ERP05 603V7 and BP-INSTASS 600V7 its asking for BBPCRM 600, BBPCRM
            700 and SAP_APPL 600, SAP_APPL 603.
         > Why does the installer ask for lower versions? ofcourse i have read that if the version is Higher than the one mentioned
            in the "Quick Guide to Installing the SAP Best Practices Baseline Package (IN)" will not work.
         > But do we have any BaseLine Packages Specific to EHP4?
         > If not, then could any one tell me where and how to download and install the BBPCRM as an add-on.
         > I only need that Software component because I strongly feel that all the interdependencies are linked with this one only.
Any help and suggestions are welcome.
Regards,
Antony Chaitanya.

Hi Sunny,
                Thanks very much for your response.
The major problem that i am having is I some how did not include the BBPCRM software component or the related software components for CRM at the time of upgrade is my best guess.
So, the latest add ons BP-CRM60 600V3 and BP-CRM70 700V1 or the add ons BP-ERP05 600VD/ 603V7 along with that BP-INSTASS 600V7 are not able to install because the prerequisite are not meeting. Only BP-INSTASS 600V1 got installed.
Can any one tell me how and what to do now.... plzzz???
Things like how to get the CRM related s/w components installed or if there is a work around to get the Baseline Packages (IN) activated with out the CRM.
Regards,
Antony Chaitanya.

How to check verison of Best Practice Baseline in existing ECC system?

Hi Expert,
How to check verison of Best Practice Baseline in existing ECC system such as v1.603 or v1.604?
Any help will be appriciate.
Sayan

Dear,
Please go to https://websmp201.sap-ag.de/bestpractices and click on Baseline packages then on right hand side you will see that On which release is SAP Best Practices Baseline package which version is applicable.
If you are on EHP4 then you can use the v1.604.
How to Get SAP Best Practices Data Files for Installation (pdf, 278 KB) please refer this link,
https://websmp201.sap-ag.de/~sapidb/011000358700000421882008E.pdf
Hope it will help you.
Regards,
R.Brahmankar

What is "SAP Best Practices Baseline Versions"?

Could you help explain what is the relationship between "SAP Best Practices Baseline Versions " and
other SAP products?
Thanks!

1)SAP Best Practices Baseline Versions will deliver preconfigured organizational settings for different scenarios with regard to the following areas: common organizational structures, logistic organizational structures, and intercompany organizational structures. these can be implemented on any of the component based on the platform availability, and cannot be directly used. For example with out installing an SAP sysetm you cannot implement baseline versions. So the relation would be Component or Product is primarily available to use the secondary component i.e Baseline versions on it.
The SAP Best Practices Baseline Package is available in different country versions (for example, for France, Nordics, Germany,
the United States, and the U.K.). The scope of these localized versions might differ depending on country-specific needs. Please check this link: http://www.sap.com/services/pdf/BWP_SAP_Best_Practices_for_Baseline_Package.pdf
2)The other products are
Customer Relationship Management (CRM)
Enterprise Resource Planning (ERP)
Product Lifecycle Management (PLM)
Supply Chain Management (SCM)
Supplier Relationship Management (SRM)
The SAP NetWeaver technology platform enables the composition, provisioning, and management of SAP and non-SAP applications across a heterogeneous software environment (release version from 640 to 700 and above) Prior to the introduction of SAP NetWeaver as an integrated technology platform, SAP has developed a number of integration technologies and offered them as individual products, among them for example SAP Enterprise Portal, or SAP Exchange Infrastructure.
SAP NetWeaver Platform
SAP NetWeaver Portal (formerly SAP Enterprise Portal)
SAP NetWeaver Business Intelligence
SAP NetWeaver Visual Composer
SAP Auto-ID Infrastructure
SAP Composite Application Framework
SAP Netweaver Development Infrastructure
Thank you,
Shyam

SAP Best Practices Installation (Baseline Package US 1.604)

Hi All,
I need to setup a 4 system landscape of SAP ECC 6.0 EHP4 with the SAP Baseline Package
(Best Practices for Country US - V1.604). Landscape is as below:
Sandbox - (1 client) - Configuration Sandbox
Development - (2 clients) - Config. Master and Development
Quality - (4 Clients) - Quality Assurance, Integration Testing, Training and Pre-Production
Production - (1 Client) - Production Client
Can you please assist with the below queries:
1. Do I need to Install/Activate Best Practices software / building blocks for each client of every system?
2. Can I Install and activate best practices for 1 client of Sandbox system and then perform the client copies to development to quality to production? Will this work?
Appreciate your help.
Thanks.
Best regards,
Kaushik Sethna

Hi,
> 1. Do I need to Install/Activate Best Practices software / building blocks for each client of every system?
No, you need to need to activate in all clients. Just activate this in one client and create another clietns with copy from this client.
> 2. Can I Install and activate best practices for 1 client of Sandbox system and then perform the client copies to development to >quality to production? Will this work?
>
Don't copy development client in production client. You should activate it manually in production system. I will recommend same to you for quality system as well.
Thanks
Sunny

Best Practices Installation (Baseline Package US 1.604)

Dear experts,
I need to setup a 4 system landscape of SAP ECC 6.0 EHP4 with the SAP Baseline Package
(Best Practices for Country US - V1.604). Landscape is as below:
Sandbox - (1 client) - Configuration Sandbox
Development - (2 clients) - Config. Master and Development
Quality - (4 Clients) - Quality Assurance, Integration Testing, Training and Pre-Production
Production - (1 Client) - Production Client
Can you please assist with the below queries:
1. Do I need to Install/Activate Best Practices software / building blocks for each client of every system?
2. Do I need to Install and activate best practices for each system separately or will the client copies from a particular client of development to quality to production will work.
Appreciate your help.
Thanks.
Best regards,
Kaushik Sethna

Hi,
> 1. Do I need to Install/Activate Best Practices software / building blocks for each client of every system?
No, you need to need to activate in all clients. Just activate this in one client and create another clietns with copy from this client.
> 2. Can I Install and activate best practices for 1 client of Sandbox system and then perform the client copies to development to >quality to production? Will this work?
>
Don't copy development client in production client. You should activate it manually in production system. I will recommend same to you for quality system as well.
Thanks
Sunny

BASELINE PACKAGE V 5.600 best practice,preconfigured smartforms isfor free?

Hello i want install in the system of my customer the BASELINE PACKAGE V 5.600 because i need preconfigured smartforms.
I have a question. if i use the user id of my customer in servicemarketplace the customer have to pay BASELINE PACKAGE V 5.6000 or IS FOR FREE??
here is described the package: http://www.scribd.com/doc/6120793/SAP-Best-Practices-Whatsnew-V5600-En
here the path on servicemarketplace:
Installations and Upgrades
Installations and Upgrades -> SAP Best Practices -> SAP BP BASELINE PACKAGE -> SAP BP BASELINE -> Package I -> BASELINE PACKAGE - V1.- V5.600
Thanks a lot!!

Hi,
If you are able to download it directly then i dont think it is a paid consulting.
Prior to providing the service, SAP mentions that it would be a paid service & asks for your approval. If you give the approval, then only it processes further.
If you are not prompted with any such information, then please go ahead & download.
Best regards,
Prashant

Latest Best pactices baseline package of Japan

Similar Messages

Maybe you are looking for