Latest boot camp + wireless mighty mouse

Hi,
I was using boot camp 1.01, I just upgraded to the latest version of boot camp. Now, my wireless mighty mouse scroll doesn't work on the WinXP side. Does anyone know how to get it working again?
In the bluetooth area in WinXP, it doesn't show the mouse, but the mouse works. I tried to add it but it doesn't find it.

Not correct. I did the complete install with my bluetooth keyboard and mouse. The firmware has low level basic support for bluetooth and it recognized my keyboard and mouse immediately. Once have finished loading xp and installed the apple drivers, you will need a usb mouse. Once the apple bluetooth driver is loaded, you won't beable to pair your keyboard and mouse until you have gone to the bluetooth control panel in xp. All you need is the mouse to do the pairing. Just have it discovery your mouse and keyboard and select to pair without using the code authentication. The caveat to this is that your keyboard loses it pairing when you start up and you will need to turn if off then on to repair. It might loss the pairing later on if you do not use the keyboard for a while. Just turn it off and on again and it will re-pair.
Glor

Similar Messages

  • Apple wireless Mighty Mouse not working in Windows XP Pro/Boot Camp

    I was able to get Windows XP Pro to install successfully on my new iMac, but I can only get a wired Microsoft USB mouse to work with it. When I boot to WinXP with just my wireless Mighty Mouse, the wireless mouse is completely unresponsive. Has anyone else experienced this, and is there a solution? Thanks!

    Why not post in the Boot camp forum:
    http://discussions.apple.com/category.jspa?categoryID=237

  • Wireless Mighty Mouse on Windows PC (one last time). Any luck?

    Anyone with any luck trying to pair a wireless Mighty Mouse with a Windows PC?
    I'm trying to get the wireless Mighty Mouse to work on a PC (not a Mac with Boot Camp). I thought it should have been easy enough since I have other Bluetooth devices that work fine. I know that topic has been discussed before but I haven't come across anything definitive that shows a way to get it to work. Would someone please point me in the right direction. If not I'll be returning it for the wired Mighty Mouse.
    As it stands now my Bluetooth software recognizes the Mighty Mouse but it can't pair it. I'm pretty sure it's a Bluetooth software issue. Your thought? Thanks.

    I've installed 'Bluetooth Stack for Windows by Toshiba' to pair my bluetooth headset with XP to get music from iTunes. It's working great.
    I've just tried to pair the Mighthy Mouse with XP and it's working!!!
    Link: http://aps.toshiba-tro.de/bluetooth/pages/download.php
    Message was edited by: Henk Puister

  • Wireless Keyboard + Wireless Mighty Mouse questions

    Hey everyone, Mac users please don't hate me for asking this but I have some questions about using the Apple wireless keyboard and wireless Mighty mouse on a windows XP PC (Not in boot camp).
    I have already bought the wireless keyboard, and have it working with my Windows PC using a Belkin bluetooth dongle, and was just wondering why the Control + Alt + Delete combo on the apple keyboard of (Control + option + Fn + Backspace) isn't working for me? I think it may be something to do with the keyboard being wireless, or possibly the Fn key will not work in Windows? I also would like to be able to remap some of the "F" keys on the wireless keyboard to windows functions like the volume and playback/ pause media keys. Is there any software anyone can reccomend which will allow me to do this?
    My second question is about the wireless mighty mouse. I haven't bought it yet, but I have strong intentions of doing so and using it with a Windows XP (to be updated to Win7 when it gets out of beta ~Sept) PC. I love apple hardware- peripherals especially, which is why I already bought the wireless keyboard and now wish to buy the Mighty mouse along with a 30" Apple display to use with the PC in my office at home. I have read mixed reports on many Mac forums about the compatability of the WMM with Windows, and have come here to get it cleared up before I spend close to £50 on a mouse that may or may not work. I heard somewhere that some but not all functions of the mouse would work in Windows, whereas somewhere else I read that a guy had installed a driver that was extracted from a (I think Leopard) Mac install disk and that the mouse was working 100% on his XP or Vista PC.
    Any help would be greatly appreciated guys, I built myself a special edition of one of my own design Eclipse series PC's to put in my new office at the start of this year and normal monitors/ peripherals just dont look right in that room because its very minimalist and modern and Apple make the most minimalist but functional hardware I know, which is why I want to use this KB/Mouse/Monitor combination.
    Thanks,
    Matt.

    I'm REALLY interested in how you got your Apple wireless keyboard to work on your XP PC. Was the keyboard recognized and working immediately? I've been reading thread after thread; still can't figure it out. Can you provide any help? Thanks.

  • Windows 7 and Wireless Mighty Mouse, Wireless Keyboard and sound problem

    Hi,
    I just installed Windows 7 x64 Ultimate on my iMac 24" white ( OS X Leopard 10.5 ). Surprisingly, it installed without any problems. The only problems I have now are the Wireless Mighty Mouse and the Wireless Keyboard ( alu ).
    After I installed Windows I inserted the Leopard Instal DVD and installed Boot Camp. I got a message right away saying that: "This program has known compatibility issues...". I clicked Run program and continued. Soon I got the same warning, but this time not for Boot Camp, but Intel Chipset Device Software. I clicked Run program yet again and it continued installing. Then I got a different warning: "Service KeyAgent' failed to start. Verify that you have sufficient privileges to start system services." I clicked Ignore and installation continued. I got another "Service Mac HAL' failed to start. Verify that you have sufficient privileges to start system services." warning, clicked Ignore again and after that it finished soon and I restarted the computer.
    When I came back into Windows there was no Apple folder anywhere or any sign that I have just installed Boot Camp ( should there be? )
    I installed Boot Camp Update 2.1 for Windows XP ( because Vista x64 version wouldn't start ) and basically I got the same warnings I did when I installed Boot Camp from the Leopard DVD ( described above ). I also tried to instal Boot Camp Update 2.2 for Windows, but it didn't start. I also downloaded Bluetooth Update 1.0, but all I got was a message saying: "This update is not intended for this computer and will not be installed.".
    There is also no sound.
    This is basically it, I really hope some of you who run Windows 7 with wireless keyboards and mice can help me, because I desperately need this to work ( I use a Windows only program for school ).
    PS. I have a 2007 iMac 24" white and while it is not on the we're-not-supporting-that list for the infamous Windows 7 Boot Camp update, all other iMacs from its generation are. Any ideas?

    Found a solution for the "Boot Camp x64 is unsupported on this computer model" message. Here is the link: http://www.techulous.com/hardware/how-to-apple-boot-camp-64-bit-for-windows-7-on -unsupported-macs.html
    Everything works ( for ) now. Yay!

  • Wireless Mighty Mouse Looses Right Click Functionality

    I am using a new Wireless Mighty Mouse (about one month old) With new batteries.
    Since I started using it, the (secondary) right click would stop function after repeated use. After many frustrating trouble shooting attempts, I discovered that the Right Click will work again if the mouse is left idle for about 15 - 20 minutes.
    I will like to know if this is a defect that's inherent in the Mighty Mouse system, and if so, has anyone found a solution to this problem or is there a fix?
    Any input would be very much appreciated
    Mac G5. 2ghz DP   Mac OS X (10.4.8)  
    Mac G5. 2ghz DP   Mac OS X (10.4.6)  

    Unfortunately my experience suggests no. I'm on my 5th (or is it 6th?) wireless Mighty Mouse now, and they've all behaved just as you described. The latest replacement was only a week ago. I suspect the only point in replacing it further times would be to demonstrate that you've tried all you can. As far as I can tell, my only recourse at this point is convincing Apple to refund me, which is a shame because I like the scroll ball design.
    I should note that I'm in Australia, in case stock has been slower to update here, but it shouldn't make a difference...
    I've noticed that the problem seems to occur a lot more frequently under hot conditions - room heater on, hot hands etc. Could it still think the left button is being touched because it's warm and/or sweatier than usual?

  • Wireless Mighty Mouse Name Changes

    For the past 5 months, I've used the same wireless Mighty Mouse without issues. During that time it retained the name I gave it upon setting it up for the first time. Then this morning (3/15), I go on my Mac and see it is label as "[MyLastName]'s mouse" and then after a few moments "[MyFirstName]'s mouse." I tried to change the name back, but I don't have the rename option under the Bluetooth cogwheel, only update name is available. Any thoughts?
    This may seem trivial, but I always get concerned when something on my MBP changes suddenly. Thanks!

    HI
    Mine works...I had to have it manually recognize the bluetooth mouse and install it. Right click the bluetooth icon in the lower right bar on windows and then go thru the recognition and install. When I boot up into windows, takes about a minute after finishing booting for the mouse to be recognized, but it works OK then

  • Wireless keyboard and Wireless Mighty Mouse failure

    Hello,
    I have just bought an iMac 20" with a wireless keyboard and wireless mighty mouse.
    Both the keyboard and mouse will not work properly.
    I followed the installation/setup instructions and paired first the keyboard and then mouse. Then the problems started.
    1. Mighty Mouse tracking is dreadful and very slow (even after adjusting mouse properties)
    2. Keyboard started to drop connection and then when awoke started repeating keys (as if key stuck)
    3. Keyboard then disconnected and will not be recognised when searching for Bluetooth devices nor can I pair it again.
    4. When both were working the Airport extreme wireless network would be lost (but I think that this is a red-herring and irrelevant)
    Interesting once keyboard stopped working the wireless mouse tracking improved.
    The only software I have installed since taking the iMac out of the box are (in order)
    - Running/installing all Apple updates (including firmware 1.1)
    - Installing Firefox 2.0
    - Installing Adobe Reader 8.0
    - Installing Stuffit Reader 11.0
    - Installing Canon Bubble Jet Printer driver
    - Installing latest version of Skype
    If I use a USB mouse or keyboard they work ok.
    This is the second replace imac within 2 weeks. The first had the same problem.
    Can anybody help please as I'm new to Mac's after switching from a PC and I do not want to have to chuck either the keyboard or mouse or have the pain of Apple supplying me with a 3rd replacement iMac
    Jonathan
    iMac 20 Inch   Mac OS X (10.4.8)  

    Welcome to the Apple Discussions. Congrats on the new Mac.
    Did you Repair Disk Permissions after the software updates and installs?
    Whether this solves this issue for you, it is something that you should always do. Go to Apps/Ut5ilities/Disk Utility and select your OS X HDD. Press Repair Permissions. Run Repair Permissions until no more repairs are reported.

  • Bluetooth not working = wireless mighty mouse not working too

    I've received an apple wireless mighty mouse from my gf and it's not responding to anything. and my bluetooth icon in the top right of the screen says it's not enable everytime since. So it's surely in my imac the problem. Is there a way i can fix it buy myself or i have to send it to an apple store?
    N.B. i have the same problem as the rest of the peps who have the latest update of Leopard

    "can you tell my why it says that while 2 weeks ago my WIRELESS mighty mouse
    was working and that i was able to go into bluetooth icon and it was active???"
    http://docs.info.apple.com/article.html?artnum=86496 Apple Wireless Keyboard and Mouse: Troubleshooting Connection Issues
    If the above Article is of no help and DaddyPaycheck does not have any more solutions then I suggest that you cross-post over in the Bluetooth Keyboard/Mouse Forums where the Bluethooth users hang out.

  • Wireless Mighty Mouse won't work properly with MacBook/tech support stumped

    Hi. First post. Anyone heard of this problem? Appears to be location-sensitive. Problem described below, but first, short background...
    Just bought entire Mac system after decades in corporate world with PC. Believed the TV ads that it would be simple. Already have been back to Mac store 6 times and have spent roughly 7 hours on phone with help line. Mac store even replaced Macbook entirely in case it was faulty logic board/Bluetooth circuit -- didn't help. Also, problem doesn't happen in store. So, to get to the point:
    Wireless Mighty Mouse doesn't work properly when hooked up to Macbook -- herky-jerky, slow, unresponsive, sluggish, imprecise, intermittently better/worse. Went through a few Mighty Mouses and finally gave up; now using hardwire mouse and there's no problem. But before I return Mighty Mouse for refund, would like to see if there's a solution b/c I'd prefer wireless.
    System is the latest little souped-up Macbook, 23" HD Cinema external monitor, external wireless Apple keyboard (which works fine), wireless Mighty Mouse (the culprit), Airport Express, HP printer. All brand new from local Mac store (Fifth Avenue, New York)... where the Genius counter folks have given up. I'm not convinced they believe me because (a) the problem doesn't occur there, and (b) after a couple of new Mighty Mouses, they finally just gave me a new Macbook to make me go away... but after going through the whole system setup once again, same problem. Have tried many different mousepads, BTW.
    Tried all the stuff phone tech support suggested -- removing/installing/reinstalling software, etc. Airport works fine; using modem and printer connections there. Bluetooth works fine with keyboard. I've scouted around for intefering devices; even unplugged electrostatic loudspeakers and old tubed amps in living room (concrete wall separates rooms), unplugged hifi in same room, etc. On 40th floor of Manhattan hi-rise; concrete walls between neighbors. Have never had interference before with anything; previous PC system worked fine with Microsoft wireless (optical) mouse.
    This is no longer urgent because hardwired Apple mouse works well. It's just mysterious.
    Any thoughts?
    Other than that, I like the Mac environment so far. Fifth Avenue store is cool, also, because it's open 24/7.
    Ken
    Macbook   Mac OS X (10.4.9)   2.16 Core 2 Duo, 2GB 667 HHz DDRS SDRAM
    Macbook   Mac OS X (10.4.9)   2.16 Core 2 Duo, 2GB 667 HHz DDRS SDRAM
    Macbook   Mac OS X (10.4.9)   2.16 Core 2 Duo, 2GB 667 HHz DDRS SDRAM
    Macbook   Mac OS X (10.4.9)   2.16 Core 2 Duo, 2GB 667 HHz DDRS SDRAM
    Macbook   Mac OS X (10.4.9)   2.16 Core 2 Duo, 2GB 667 HHz DDRS SDRAM

    Hey, thanks! That was fast. I'm impressed by the Mac community.
    This program helped my hardwired mouse, actually, and did give me wider parameters on the wireless mouse, but it didn't correct the herky-jerky/sluggishness -- actually amplified those problems.
    Ken

  • Connect Wireless Mighty Mouse to windows xp pro sp2 on bootcamp

    I recently installed windows xp pro sp2 on bootcamp i tried to hook up my Wireless Mighty Mouse and I got basically nowhere. I was able to get the computer to recognize it and i typed in the passkey "0000" and it knows that it is a bluetooth device and I changed the settings of the bluetooth to "always" be discoverable and still I have hit a dead end. I can still not seem to connect the wireless mouse in any way. What do I do???

    I FUIGURED IT OUT!!! omg im so happy right now. For anyone who might be wondering I'll tell you how to make it work it you had the same problem. Once you establish the mouse a device, highlight it in the devices menu, then click properties, then services, and once it is done searching check the box for the driver and click apply and your mouse should work.

  • Does Time Machine Backup irritate wireless Mighty Mouse?

    Hi there. I'm having a strange issue here. With an iMac that came with bluetooth mouse and keyboard, OS out of the box (no software updates installed because there's no internet connection), each time Time Machine is backuping files, the Mighty Mouse is acting weird. It actually feels like someone else is working with it. Even if I do not use it and leave it alone, the pointer goes wild on the screen. Trying to work during Time Machine backups is impossible, because I cannot use the Mouse properly.
    Does anyone of you have a similar, if not, the same issue? Any ideas?
    Thanks in advance,
    later, Stephan

    I am having a similar problem with my IMac and Time Machine. During wireless Time Machine backups, the wireless mighty mouse and wireless keyboard disconnect. If the mighty mouse remains connected, it moves very slowly and is virtually unusable.
    So far I've thought of two potential problems to troubleshoot:
    1. I experience this problem when I connect to the Time Machine through the "802.11n (802.11b/g compatible)" wireless connection (set in the AirPort Utility), but I don't experience the same problem when I connect to the Time Machine through a wired ethernet connection. So it appears the b/g compatible setting is causing interference. I haven't tested to see if the "802.11n only" wireless connections causes this problem or not.
    2. I also wonder if the IMac does not have enough RAM to complete the wireless backup. My IMac has 2gigs of RAM, and during backups it maxes out. I plan to upgrade to 4 gigs to see if the problem continues. (Stephan, how much RAM to you have installed?)
    peace,
    Marcus

  • Windows 8.1 wake problems on MBA using latest Boot Camp drivers?

    I'm using the latest Boot Camp drivers: 5.0.5033 and when the mac goes to sleep I can't wake it. Either auto sleep or manual sleep, it won't wake until I hard reset the mac. Please help? Do I need newer boot camp drivers? These are the newest drivers on the website, so... Do I need to wait for Apple to release new drivers?

    there currently are not newer drivers apple does not officially support 8.1 so we're in the wild west in terms of if things works
    live it with and wait for official support
    or
    reinstall win8

  • Wireless Mighty Mouse Sputters During Network activity

    Has anyone figured this one out yet.
    I have a wireless mighty mouse that when you copy files to or from a computer off a network,
    it sputters and barely moves when trying to use it. If i plug in a usb mouse there is no problem at all.
    Was using a verizon wireless router and just bought an airport extreme. Guess what. Still does it. When I hard wire my computer to the router all works fine.
    I just cant think of what this could possibly be. Any help would be appreciated.
    Thanks.

    There are a lot of people with this problem - mostly MacBook owners, but probably because they're more likely to have the wireless and BlueTooth running.
    I have the problem with a Logitech mouse on a Mac Mini -- cursor goes bonkers at random intervals, with terrible mouse lag, and I basically can't use the mouse when it's happening. It doesn't correlate with anything I can see in the Activity Monitor, but I can stop it if I turn off BOTH Airport and the router.
    Not likely to be RF interference with the signals, IMO, but some have reported that switching to an 802.11n router (or 802.11g with b compatibility disabled) solved the problem.

  • Bluetooth headset disconnects wireless Mighty Mouse

    I have a Jabra bluetooth pair of headphones (BT620S) that I use with my Intel iMac. They work great as headphones since they are connecting via A2DP. But they also have the option of being used as a headset, for example with softphones or similar. Only this is useless!
    Every time I connect as a headset, my mouse disconnects and the sound result I get is really bad. It's like an inch thick concrete wall is between the headset and the computer, even though I'm sitting immediately in front of it?!
    Any ideas? I've tried to unpair and pair both devices again. I also have a wireless Apple keyboard. Thanks!

    "can you tell my why it says that while 2 weeks ago my WIRELESS mighty mouse
    was working and that i was able to go into bluetooth icon and it was active???"
    http://docs.info.apple.com/article.html?artnum=86496 Apple Wireless Keyboard and Mouse: Troubleshooting Connection Issues
    If the above Article is of no help and DaddyPaycheck does not have any more solutions then I suggest that you cross-post over in the Bluetooth Keyboard/Mouse Forums where the Bluethooth users hang out.

Maybe you are looking for

  • Test messages going to the wrong contact

    Every now and then, I will send a text message to a friend, and somehow, the message and the following conversation, seems to be copied to my wifes phone. An interesting scenario!! Also makes me wander who else might be aware of my sms conversations!

  • Service Desk Message from Portal

    I enabled the iView for the support message to be sent from my portal.  However, it does not show in the iBase.  My SMSY is updated and shows the Java system components.  How do I get the service desk to see the portal.  I am running EP 7 with NW 200

  • How To Find and Delete duplicates in Itunes 11

    Since the new update (Itunes 11), file, show duplicates is no longer there. I have just wiped my computer and all of my music resynced to my library twice and so now i have doubles of everything... I would like to know how I can view them all to dele

  • Mail starts at boot up on my MacBook

    Mail is not set to automatically start when I log in but yet it launches at start up each time. I've tried to resolve it on my own but can't seem to find any logic as to why it automatically launches at start up. It launches on my MacBook but not my

  • Best codec/practice/software for importing Screen Demo Video

    Hello! I have access to Snagit 8, Microsoft Media Encoder, and Flash 8. What I'd like to do is use these three programs to capture on screen interaction with websites via Explorer, import it into Flash 8 and add text and interactivity. Obviously, I'm