Latest Daniel K drivers

Hey,
Which are the latest Daniel K drivers
Would they also worth on my Auzen X-Fi forte and what's the best way to go about uninstalling the old ones and installing the news ones?
Thanks

Ive been using the SBXF_AZHTHD_2_20_0020_RC4 pack. Uninstalled old via control panel, reinstalled software minus creative drivers and installed the above mentioned drivers. They have solved some of my problems (like the shutdown issue) but not the "no sound after resume from sleep" issue. And im not sure if these are the latest drivers from daniel_k so hopefully someone else can chime in.

Similar Messages

?I am getting an error when installing on my dell inspiron with latest updates for drivers. Error 1406. I have the problem with Scan Snap software and a full version of reader.

?I am getting an error when installing on my dell inspiron with latest updates for drivers. Error 1406. I have the problem with Scan Snap software and a full version of reader.

Error 1402 | Error 1406 | Acrobat, Reader

Windows 8.1 wake problems on MBA using latest Boot Camp drivers?

I'm using the latest Boot Camp drivers: 5.0.5033 and when the mac goes to sleep I can't wake it. Either auto sleep or manual sleep, it won't wake until I hard reset the mac. Please help? Do I need newer boot camp drivers? These are the newest drivers on the website, so... Do I need to wait for Apple to release new drivers?

there currently are not newer drivers apple does not officially support 8.1 so we're in the wild west in terms of if things works
live it with and wait for official support
or
reinstall win8

Latest Toshiba 3G drivers & Wireless Manager don't work in Windows 7?

Hi all,
I've installed, uninstalled, and re-installed the latest Toshiba 3G drivers and Toshiba Wireless Manager software for my NB200-123 netbook, and they don't appear to work in Windows 7.
When I start the Toshiba Wireless Manager software now (version 6.3.1.101), it starts for a split second, then Windows 7 immediately pops up a dialog box saying:
"Wireless Manager has stopped working"
(I used to have the older XP drivers partly working, though they had the problem that if you hibernated the netbook, the next time you opened the Toshiba Wireless Manager software, it would freeze at the point where it said, "opening driver", and it would never come back)
I've currently got the following versions:
Toshiba F3507g Mobile Broadband Device - (from Toshiba) version 4.54.7103.1, dated 26/6/2009
Toshiba F3507g Mobile Broadband Network Adapter - (from Ericsson) version 1.0.0.52, dated 29/7/2009
Has anyone else managed to get this working on their NB200-123 with Windows 7? I'm wondering if I have a bad driver version somewhere?
I can't imagine that Toshiba would have rolled this out without testing it, so I must have something misconfigured somewhere.
Best
Rob

Ok, this does appear to be related to some kind of failed access to a .NET library. Whenever I try to launch any of the Toshiba applications, it fails immediately, and I get the following Application Event error in the event log. Note that the reference is to CLR20r3, which has to do with .NET I understand. mscorlib, referenced below, is definitely a .NET library.
Now, I know that this is supposed to be running on .NET 3.5 sp1, but I'm on Windows 7, and that includes .NET 3.5 sp1, and furthermore I've run tests on the OS to determine the .NET version(s) installed, and I've definitely got .NET 3.5 sp1 installed. So why am I getting this error?
Fault bucket , type 0
Event Name: CLR20r3
Response: Not available
Cab Id: 0
Problem signature:
P1: wirelessmanager.exe
P2: 6.1.3.1
P3: 4a895b6e
P4: mscorlib
P5: 2.0.0.0
P6: 4a275af7
P7: f50
P8: 7
P9: N3CTRYE2KN3C34SGL4ZQYRBFTE4M13NB
P10:
Attached files:
C:\Users\rob.DESKTOP\AppData\Local\Temp\WER429D.tm p.WERInternalMetadata.xml
These files may be available here:
C:\Users\rob.DESKTOP\AppData\Local\Microsoft\Windo ws\WER\ReportArchive\AppCrash_wirelessmanager._f99 9ba902d33835d8a9c2164386cf138c110bc_14ae60f6
Analysis symbol:
Rechecking for solution: 0
Report Id: 557e9845-06bc-11df-82ad-db865f2b48b5
Report Status: 65

990fxa gd65+win8.1 are the latest AMD chipset drivers needed?

990fxa gd65+win8.1 are the latest AMD chipset drivers needed? any benefit?
http://support.amd.com/it-it/download/chipset?os=Windows+8.1+-+64
Thanks

it just depends if you have problems you have with your chipset!
if the answer is its working perfectly well and all the ports speeds are normal leave it alone and use your current ones!
if the answer is you are having issues with your USB ports or something else then update them!
(Newer drivers can sometimes induce problems with your system and it just depends if you have problems or not if its a good idea to update)

HOW TO: Install LATEST ATI CATALYST drivers

So ATI/AMD doesn't consistently update the "BootCamp" drivers and as a gamer I want utmost performance out of what I have (of course without OCing). Therefore, I went searching for a solution and found it and I will explain it here, step by step. Forgive me if this has already been posted. Note that I did this in XP and NOT Vista.
1. Download the latest CATALYST drivers from here:
http://game.amd.com/us-en/drivers_catalyst.aspx?p=xp/radeonx-xp
2. Open the driver software as if you were going to install it and let it extract to its default directory. Take note of what that directory is as you will need to know that file path for later. Once it extracts it will move on to an installation. Stop/cancel the installation the first chance you get.
3. REMOVE your currently installed ATI drivers. There are two ways to do this:
-1. If you downloaded the actually CATALYST Software Suite, there will be a program in the folder to where it extracted called "AtiCimUn" that will remove your drivers.
-2. Google "remove ATI drivers" and I think it's the first link that tells you a detailed step by step method of removing the drivers.
4. Restart after successfully removing the drivers.
5. Download MobilityModder here: http://www.driverheaven.net/modtool.php
-If you scroll closer to the bottom of that page, there will be a download link AND instructions for the PROPER method of installing MobilityModder.
6. Run MobilityModder
7. Browse to the directory where the drivers are installed.
8. Click "Modify"
9. When the modification is complete, close MobilityModder and Right Click on "My Computer" then click on Properties
10. Click the "Hardware" tab
11. Click on Device Manager
12. At least one device should have a yellow circle with a black question mark in it. For me, Windows saw it as a "VGA Controller". Right click it and click "Update Drivers"
13. It will ask you some stuff about if you want Windows Update to look for drivers, say "No not this time" and click next
14. Select "Install from a list or specific location{Advanced) and click next
15. Select "Don't search, I will choose the driver to install"
16. Click on the "Have Disk" button
17. Browse to the folder where the ATI drivers were extracted to (MobilityModder will have rewritten the modified files to the same location)
18. The specific file you are looking for is a Configuration file whose icon looks like a white notepad with a yellowish cog that has some metal rod going through it. Click on it and click "open"
19. At this point Windows should recognize which card you have specifically, if not, it will have the entire list of cards that driver can update. If you run into that, just find it in the list.
20. Let windows copy the files, if it tells you that the drivers are not digitally signed, say "continue anyway". It's just an effect of the MobilityModder modifying the files and since it doesn't have a certificate, it's not considered signed.
21. When it's done click finish.
22. Restart
23. Happy new drivers
I'm thinking you might be able to skip the MobilityModder part and just skip straight to directing Windows right to where the drivers are instead of having to mod the files. I'm not sure if it works because I haven't done it but you're welcome to try. If it doesn't work it just means you have to use MobilityModder.
I hope this helps.

Update: After using the method described above the drivers did install successfully however, when I loaded some games I noticed that they did not take up the whole screen. No amount of changing the resolution solved the problem.
So I completely removed the drivers and loaded unmodified drivers. I had to find my x1600 from the list and there were actually two but I just took the first one. I let Windows copy the files after warning that it can't confirm they were for my hardware. After a restart I tried my games again and they were taking up the whole screen as they did when I had BootCamps outdated drivers.
So I can say that you CAN skip steps 5-9 (the steps for the mobility modding). You'll just have to find your drivers and some of them do show up multiple times. I'm probably going to try the other x1600 listing just to see what happens. I'm not sure if there's a difference between the same listings (mine was Radeon x1600 followed by another Radeon x1600) but I'm assuming there is or else ATI would put so many >.<

Cannot draw in Flash Pro CC on Surface Pro 3 with latest N-Trig drivers...Is there a current fix?

Cant draw in flash pro cc on surface pro 3 with latest n-trig wintab drivers. Many others online say they have this issue on surface pro 3 also...Is there not some type of current fix. Someone on the adobe forums said the problem was fixed internally in flash pro and that the fix will come with next adobe flash pro update, but when is that?
Flash updates don't exactly come every month or even 2 months, and this issue needs some type of current fix because there are many ppl also having this issue, which basically makes Flash Pro useless, what good is an animation program if you cannot draw in it on a tablet that literally SPECIALIZES in pen/drawing usage. So anything out there ??

bump
its very frustrating as I'm paying monthly for CC and can't use one the programs I need for my design job! Looking at other programs.

Sound in xp using latest boot camp drivers

Hey all - I have a problem in xp that I am wondering if anyone else has...
I cannot get sound out of the "line out" (I have the computer hooked up to speakers). I can only get sound out of the headphone jack - and NEVER get the sound out of the front (internal) speaker in xp. Anyone know what's going on?
I have looked at the RealTek controls, and I can't seem to select or otherwise enable the "line out" or internal speaker. I'm lost - anyone have any help for me? Thanks!

I found something that may be helpfull... I email this guy who is an expert on drivers for boot camp- this is the discussion so far...
On Sep 6, 2007, at 22:42 , Brandon Coppin wrote:
Hey Makel,
After hours of searching I finally found a useful website... yours.
I recently purchased a new 24" imac with 2.8ghz extreme, 4gigs of ram
and the ati radeon 2600 with 256mb memory. I installed windows xp and
the so-called Macintosh drivers cd... the sound is echoing really bad
and very patchy. The video card appears to be operating normally most
of the time- until I try to play a video in media
player- it only shows shades of blue... Also Simcity 4 runs far more
slowly than it should on a system of this caliber. Do you have any
suggestions for drivers or any other insights. I really appreciate
your input,
Brandon Coppin
Hi Brandon,
I'm glad you found my article on Boot Camp drivers useful. Keep in mind I only have experience with MacBook Pros and Boot Camp, but I think I have a few pointers for you which can get you back up and running. Regarding your system spec, remember that unless you're running Windows 64bit (Vista or XP) you will not get the full benefit of those 4 gigs of ram - the most you'll see is a bit over 3 gigs. If you are running a 64bit version of Windows, stop, wipe it clean and start over with a 32bit version.
Your assumption that the iMac running XP should be a 'screamer' is correct. If SimCity 4 isn't isn't blazing fast, there's something iffy going on. First thing you should do is grab the latest driver release for your Radeon 2600. You can download those here: http:// ati.amd.com/support/drivers/xp/radeonx-xp.html
Regarding your other driver issues, I would suggest skipping the Boot Camp installer and do the driver installation manually. You'll need to know what's actually inside your system, and to do this you'll need a utility to analyze the hardware. I recommend SiSoft Sandra (http://www.sisoftware.co.uk/index.html?
dir=&location=pinformation&langx=en&a), there's a free version available for download.
Once you know what's inside your new iMac (because to be honest, I
don't) you can selectively install the drivers that Apple provides you with via the Boot Camp Assistant.
Before doing this though, nuke the Windows install you currently have and start fresh.
I hope that clears up your problems, let me know if it does, or if there's any other snags you come across.
Cheers,
Niels Mäkel
[email protected]

Using Latest SATA Raid Drivers When Installing Windows XP?

Getting my raid 0 setup on my K8N Neo4/SLI board wasn't as easy as it should have been. I ran into a few problem with my raid drivers that came with my system. While I was trying to install Windows XP, the system refused to restart itself even after the installation was done. A push of the reset button was necessary to help continue the install. Only after I installed the latest nForce 4 Forceware drivers was everything working the way it was supposed to. Since I would like to avoid this trouble the next time I decide to set up raid, how would I go about creating a floppy disk that contains the latest raid drivers to use for a Windows install? Thanks!

Download the manualhere. Then refer to from page 6-2, you will know how to configurate the raid.
My friend has the same mainboard as yours, so I just refer him for the information you need.

How to Install Latest SB Live Drivers Onto New Install of

I upgraded to a new motherboard and CPU and have just installed a fresh new copy of Windows XP on the machine. I haven't plugged it in yet, but I will be installing a SB Li've Value CT4830.
In preparation for installing this card, I tried to download the latest drivers, but the web site says that in order to install the latest driver, I must already have the driver from July 2002 installed.
Where can I get the July 2002 driver? It can't be on my original CD since I bought the card before 2002.
I am trying to do a minimal install of drivers, and do not need or want to install any non-essential appliction software, unless its necessary to get surround sound.
If it matters, XP Service Pack 2 is installed.Message Edited by anthonyanthony on -25-2004 02:25 PM

Bif
Same thing here with me. I recently got a new system but kept my Soundblaster
card (Li've Platinum 5.) and with it a fresh install of XP SP2. I knew I would
have to use the Li'veDrvUni-Pack(ENG).exe driver update because the origi-
nal CD could not be used (same as you). So I was doing a fresh install of the
Li'veDrvUni-Pack(ENG).exe with no pre-existing Soundblaster stuff installed (save
for the XP Soundblaster drivers).
So here is what happened:
* ran Li'veDrvUni-Pack(ENG).exe; did the typical install
* sound is ok -- however, I ran the diagnostics and the mixer, soundfonts, and
one other one (the last item, forgot which one it was) failed
* tried to start the mixer to verify the mixer failure and the familiar "CTDevcon.dll
has failed" message came up
I have had this happen to me before in trying to install the Li'veDrvUni-Pack and I did
manage to get everything working again but I forget how. I believe it involved running
the CTzapxx program which I did try but XP keeps on putting in the default Sound-
blaster drivers after rebooting. I think this might be the problem (the fact that the
default drivers keep on getting installed) but I can't remember how to get around it.
Moderators/experts/technicians -- any ideas?
DarkO

Need latest graphic card drivers for Satellite Pro M70

I've had this PC for only a few months now and i've been disappointed to have heard that my drivers are WAY out of date. The only drivers i can find are on here and they are only v.8 something (although the game reads this as an older version).
The problem comes in when i want to play games like Half Life 2 and CSS, the game crashes because these drivers are out of date. Where can i get the LATEST drivers for the ATI Mobility Radeon x700 card for the Toshiba Pro M70?

Hi Stephanus
First of all you must not be disappointed about that because you must understand few things. Because of notebook construction it is not recommended to force graphic card to run at the limit. Using latest drivers you do exact something like that. More performance means more warmness and I hope yo know very well what happen when notebook is too hot.
I am not 100% sure but I presume that Toshiba priority is to provide hardware protection. I saw that some other notebook manufacturers offer latest drivers but there is also notice that they are not responsible if something goes wrong.
One more thing: you have mobile computer and not desktop.

Latest LiveUpdate 3 drivers making computer bad...

About a month ago I downloaded the latest Live update (3), and latest drivers, both things worked fine, but they disabled my CPU Usage in the Performance section go down to 0%, right now, if i dont do anything, cpu usage goes straight to 0, with that stuff, it would keep jumping at 6-20 all the time !!!
are there any even newer updates to fix that stuff ?
thanks

WHQL is a certification of microsoft, basically its saying that its garunteed compatible with WINXP (or whatever version of win you use), using non-WHQL drivers can (not always) sometimes cause incompatibility with WINXP or other devices on your system. As far as video cards are concerned...it is always safe (and best) to update to the current available drivers that are designated WHQL...there are exceptions which includes 3rd party drivers...i personally wouldnt use any 3rd party drivers unless they are from http://www.omegacorner.com they make the best and relaible 3rd party drivers for both nvidia and ATI...also make sure you have Winxp Service pack 1 or higher installed...that being said..download the latest ATI drivers specific to your card...which is???
the current default ati drivers are 4.3

Latest GX640 VGA drivers run gfx unneccesarily hot

I installed the latest (06-21-2010) VGA drivers from the MSI website on my GX640, but I now notice that my graphics card keeps running at 405mhz/1000mhz/0.9v (clock speed/memory speed/voltage) while idling on the desktop. Normally I could clock back these settings (I set them to 150mhz/300mhz/0.9v) by messing with the profiles.xml (in C:\Users\<user>\AppData\Local\ATI\ACE), but Catalyst Control Center seems to ignore this file entirely since I updated. For this reason, my laptop produces a lot more heat while idling then normal (my HD5850 is about 62C while idle, normally I could keep this down to 50C). Could this be addressed somehow?

The drivers are written and provided by ATI and MSI (or any other manufacturer) does not do any software editing on CCC. If the updated version of CCC in that driver package ignores you manual changes for some reason, then perhaps ATI/AMD has made changes that affect the way the program handles stuff like that. In any case, whatever the case may be (whether this is a bug nor not), MSI is not going to do any post-programming on CCC versions released by AMD/ATI.

Re: latest c216 chipset drivers for GE60 ?

Since you already seem to have the latest drivers available why are you being so ungrateful for someone trying to assist you? Get a grip on reality why don't you. One of these days you might have a real problem and with that attitude no one will bothe...

Quote from: Chike on Today at 21:43:11Time to remove the CPU (be careful) and inspect the socket for bent pins.
Taking a clear macro picture with good light is the easiest way to do it.
Do not install the MB insid...

Latest Apple Bootcamp drivers...Where?

Where can I find the latest Apple Boot Camp drivers for a 27" Quad-core i7 iMac?
I've created my WinXP partition and installed XP and things seem to work well except a few games and apps (latest printer drivers for an HP Photosmart C5250 report errors, indicating USB problems. However, there are no "banged-out" items in device manager).
When I first purchased a newly released 24" iMac a few years ago, the video driver was not working well for some games. A few weeks later, Apple posted updated drivers for this iMac and things have worked well since.
I'm wondering if something similar is happening for this new 27" iMac, hence my interest for latest driver list for this iMac.
Ideas?
Thanks
-Mike

synergy2000 wrote:
Is there any update for 64-bit Windows as well?
http://support.apple.com/kb/DL979
And/or the general support page for BootCamp is well worth a visit http://www.apple.com/support/bootcamp/

Latest Daniel K drivers

Similar Messages

Maybe you are looking for