Latest drivers and audigy applicati

hi
i'd like to know ...if i install the lastest driver for the audigy on vista 32 bits, will the applications from danielK's drivers still work with the new driver
i mean that i d like to use the applications which danielk provided for vista and the latest driver.
did anyone test this

I have been running the Daniel K's drivers on Vista Ultimate 32 bit. I did the download of the new drivers and let them run without first uninstalling Daniel K's stuff. The drivers installed with no issues. The EAX settings, EQ, Speaker Settings, and Soundfont Bank Manager applets all still show an install date of when I did the Daniel K driver and all still are working.

Similar Messages

Latest drivers cause Audigy SB0090 h

Since a recent (Nov. 9) Microsoft Update suggested Sound Blaster driver update for Windows XP SP2, ostensibly compatible and correct for my hardware, my Audigy MP3+ card hisses loudly and constantly (no popping or crackling). Even when sounds are played through the hiss, the hiss is 80% of the sound. Obviously, something is wrong. I have tried plugging my speakers into various Sound Blaster card audio outputs to no avail. I am unable to successfully, completely uninstall the latest drivers and revert to the original Windows XP drivers supplied on the CD-ROM (circa 2002) despite separately following FAQ guides, uninstalling all drivers in Safe Mode, and reinstalling from my original setup disk. Current drivers from either www.download.com (search "Audigy"), Creative.com's SBAX_WBUP2_LB_2_09_006.exe install successfully... but hiss equally. This most recent driver set, self-identified from Creative's homepage, triggers a blue screen of death when?accessing Control Panel/AudioHQ/EAX Control (remarks file CTOSS2K.SYS). I have never used the analog cable, only digital, and see no logic in reverting to an analog solution when digital drivers were working fine prior to Microsoft's troublesome update.Status:
Asus P4S533WA socket 478 motherboard with latest BIOS;<
Current BIOS worked fine with previous SoundBlaster drivers... no recent BIOS updates prior to changing drivers;<
No BIOS caching or shadowing;<
Motherboard's audio chip disabled in BIOS (and has been for years);<
Intel P4 2.4Ghz processor;<
.5 Gb of RAM;<
56 Gb of free hard disk space;<
Sound Blaster Audigy MP3+ 24-Bit model SB0090 PCI card;<
Sound is set to 48 KHz, 44. causes crackling, 96 Khz only reduces the hiss slightly;<
Moved the Sound Blaster card into various PCI slots, now located in PCI 3 away from my video card;<
The device is working properly and there are no conflicts;<
SB card is using IRQ 8, no conflicts;<
Current "Creative SB Audigy" driver is dated 8//2006, ver 5.2.4.96, Microsoft signed;<
Device instance ID is: PCI\VEN_02&DEV_0004&SUBSYS_00502&REV_03\3&6AAA0&0& 50<
394 firewire port is disabled to free resources;<
There is no modem on my system nor are there any modem drivers to conflict with the SB card's IRQ.<
Please advise. Thank you,?Zlad

Marius if you did swap the other jacks of the speakers in that Line and all of them are doing the same (only one channel), my guess it is that the jack itself is broken. Check the pins to be corectly soldered on the board.
PS: From Bucharest (40 phone area code)?Message Edited by SoNic2367 on 04-2-2006 2:56 PM

R9 270X Gaming 2G, unable to use the latest drivers and Mantle

I just bought a R9 270X Gaming 2G S/N 602-V303-13SB1312109829-398
When I first got the R9 270X, I installed the latest AMD drivers with the full package.
Later I got the, what I found to be, notorious atimkdag.sys BSOD.
I recovered my system partition with Acronis from before I installed the GPU. And installed the drivers found on MSI website which are considerably older than those on AMD’s website. I have not had an atimkdag.sys BSOD since. In fact I think I am using Windows stock drivers as the driver version says 13.251.9001.0, and I think the MSI driver is 13.101.0.0. Not sure how that happened.
Now my understanding is that this GPU should be Mantle enabled, however using Star Swarm Stress Test, which includes Mantle testing, said it found no Mantle enabled GPU. Perhaps because I am using an older driver.
I read somewhere that atimkdag.sys BSOD is linked to AMD Catalyst Control Center. Since I never used that last time I had an AMD GPU, I have disabled it on start-up.
What do you guys think would be the best option here? How can I both enjoy the latest drivers and avoid the notorious atimkdag.sys BSOD. Or do you think I should just stick with the drivers I have, without Mantle enabled. I haven’t actually got any Mantle enabled games at the moment, but are planning to get it though.
It may or may not be important. But I upgraded from Windows 7 to Win 8 Pro then Win 8.1 Pro. Perhaps it is leftover sys files. I noticed in forums that the atimkdag.sys BSOD mostly hit Win 7 systems. Perhaps the reason I am not getting the BSOD now is simply that I am not using AMD Catalyst Control Center, as you would think that if it is left over from Win 7 it should affect both old and latest drivers, right.
Thanks

Please disregard my previous post asking for help.
This is also a message to other noobs like myself, read the F.A.Q. before you post anything in the forum. I read the F.A.Q. about how to update drivers, how to remove old driver fragments and followed it to the letter.
https://forum-en.msi.com/faq/article/where-can-i-download-vga-drivers-and-how-do-i-install-t
Now Mantle works and as for the atikmdag.sys BSOD, hopefully I will not experience this now that I completely uninstalled all previous driver files, using Driver Sweeper in Safe Mode. I do not see why I should.
If against odds it happens, then I will come back and ask you guys for help.
Thanks

Can I force the bootcamp wizard to skip looking for the bootcamp drivers? I have already downloaded the latest drivers and loaded them on a FAT usb drive. All I want is for bootcamp to create the partition and allow me to install windows 8 pro

Hi Everyone,
Can I force the bootcamp wizard to skip looking for the bootcamp drivers? I have already downloaded the latest drivers and loaded them on a FAT usb drive. All I want is for bootcamp to create the partition and allow me to install windows 8 pro.
The bootcamp drivers have been downloaded from apple's website. Filename: BootCamp5.0.5033
I have a iMac 27" late 2013 model.
NOTE: I have downloaded the drivers manually from apples support site as the bootcamp wizard fails third of the way through the download.
Appreciate any assistance.
Regards,
asdutoit

There is a missing point in this thread, and it is that the Boot Camp drivers for the Late 2013 iMac can only be downloaded from Boot Camp Assistant. The Boot Camp drivers available in the Apple site are not compatible with that iMac.
Delete the Boot Camp drivers from the USB drive, open Boot Camp Assistant and try to download the Boot Camp drivers again. If you get a message telling you that they could not be downloaded, I would try reinstalling OS X through OS X Recovery, by holding down Command and R keys while your Mac is starting up

Cannon 8800F not working with OS X yosemite 10.10.1 . I have downloaded the latest drivers and firmware from Canon. I called Canon for support and went through all the checks , but, still my iMac did not see the scanner. Any new ideas?

cannon 8800F not working with OS X yosemite 10.10.1 . I have downloaded the latest drivers and firmware from Canon. I called Canon for support and went through all the checks , but, still my iMac did not see the scanner. Any new ideas?

Have you done any of the following?
http://support.apple.com/kb/PH18614 OS X Yosemite: Reset the printing system
Repaired permissions & restarted your comp after the installations of the drivers?
Sometimes, installing the GIMP drivers help with printing issues: http://gimp-print.sourceforge.net/MacOSX.php
What to do when you can't print
=============
not working with OS X yosemite 10.10.1
Per your profile
Mac OS X (10.7.3)
Conflicting info: Please update/correct your profile so that you can receive the correct troubleshooting suggestions. This will assist the users in trying to help you. Thank you.

Latest drivers for audigy ca

Hello i have installed the latest drivers from this site. but i think the new drivers messed up te decoding of cmss. i dont hear nothing from the center and other four speakers are the same as the front speakers. why cant they make drivers that its works and the latest drivers has a delay in it of 3ms please fix it

hello
i got a audigy player (D400) and i got a dtt2200. all sounds are great if i install it from the cd. but if i get te latest drivers of it.
The cmss upmix is a little bit confused it's like there is no upmix at all it's like hearing 6 channels to same.and the center louds to soft and it has no surround. if i play games it's working great if i play movies it workig 00% but if i play music from winamp or mediaplayer it has no surround only like a 4. speaker set. do you think this is a problem with my speaker set or soundcard. i am confused when i install it from the orginal cd it's working all fine but, newer games won't work with older drivers.
please help meMessage Edited by Yoshi05 on 06-22-2005 07:02 PM

Movie Maker can't start, graphics card has latest drivers and Direct X10

Hi, I'm attempting to get Movie Maker to start on a 64 bit notebook which I believe has the correct specs and has latest video card drivers and direct X10 or 11, can't remember. How can I further troubleshoot this?
Bill

Hi,
Have you checked that your PC meets the minimum system requirements here:
http://explore.live.com/windows-live-essentials-system-requirements ?
Older graphics cards will often not support some of the newer technologies, even if if they have the latest drivers. Is this your issue?
Also, You may need to install DirectX 9.0c runtime components if you are running Windows 7. This will add some components necessary for programs that use older versions of DirectX, which includes Windows Live 2011 Photo Gallery and Movie Maker.
Download the full installer here:
http://go.microsoft.com/fwlink/?linkid=56511&clcid=0x409
Spencer
TechNet Community Support

Problems with latest drivers for Audigy 2

Here is my problem: I have tried several times to install the newest drivers. However my sound card doesn't install correctly. I dl'ed the drivers and the dvd-audio .exe thinking the dvd-audio is what I needed. It wasn't. The dvd-audio program gives me a error message saying no device is found. Going into the control panel --> sounds and audio settings, shows I have no device installed. Likewise in the device manager the little yellow "!" is there, and windows says multimedia audio controller, nothing more. However, if you try to install drivers, you will get a message saying drivers for the device are there, and will be uninstalled to continue installation. Um, what gives? Am I doing something wrong? The original drivers work and so do the beta AL drivers but the latest I can't get to work.... :smileyindifferent:

The card should have come with a CD. Did you contact your supplier or the store where you got the card, to see if they have the CD for you?
Cat

XiFi and Audigy Take Over Input and Output from Bluetooth Head

I am having trouble with my bluetooth headset when making phone calls in any VoIP application (Skype, Yahoo!). I usually use the headset as the input and output for my VoIP bits so I can move away from my desk, etc... First, it worked under XP with my Audigy no problem. I bought a XiFi and installed the latest drivers and it began stealing my audio. Oddly, it does not do it until the call connection is made (so I hear the ringing in the BT headset and once the call is answered the system reverts to the mic, a Logitech USB, and main speakers, directly plugged to the soundcard).
I decided to put my audigy back in, because I was planning on upgrading to Vista and thought the XiFi may be bad. I did a fresh Vista install with the Audigy and everything worked (i.e. audio for phone calls stayed in my BT headset). I then upgraded from the Microsoft drivers to Creative?s Vista drivers and the problem then happened with the Audigy as well.
This leads me to believe that some sort of regression happened in the latest drivers. Everything else works great, games, movies, etc? but this is a show stopper because I want to use my bluetooth headset. I tried to downgrade to the Microsoft drivers but the card would no longer work. I have tried a driver install only, then added the software, removed that and did a full install. This is with BETA drivers on Vista, but the problem existed in XP as well which were not BETA drivers AFAIK. I have updated to the latest Bluetooth drivers as well with no luck.
I have confirmed this on two of my PCs and a friend of mine is having the same problem (XP, XiFi) so he went and bought a Skype phone which works correctly.
Thanks in advance

thanks for reply..
Please help me out with the entire setp by step procedure that i have to follow in getting the output in variable
i am using to get the emp name from webservices and i am passing empno from form.
INPUT STRING
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:tem="http://tempuri.org/">
   <soapenv:Header/>
   <soapenv:Body>
      <tem:ALL_GetEmpNamefrmID>
         
         tem:EmployeeLogin>{$ /process_data/@emp_no $}</tem:EmployeeLogin>
      </tem:ALL_GetEmpNamefrmID>
   </soapenv:Body>
</soapenv:Envelope>
when i hard coded emp no for testing EG: 1234 the out put i am getting the folloeing XML when i click tes
OUTPUT:
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
   <soap:Body>
      <ALL_GetEmpNamefrmIDResponse xmlns="http://tempuri.org/">
         <ALL_GetEmpNamefrmIDResult>SUBBA</ALL_GetEmpNamefrmIDResult>
      </ALL_GetEmpNamefrmIDResponse>
   </soap:Body>
</soap:Envelope>
Please help me out what are the steps i have to follow for getting out put SUBBA to my variable

Windows 7 and Audigy 2 ZS

Hey
I want to know the latest drivers and working solutions for the Audigy 2 ZS under Windows 7. Bioshock 2 doesnt seem to work with 7.
Thanks

\ Best bet for getting Audigy 2 ZS working correctly under windows 7 is this driver pack:
<a rel="nofollow" target="_blank" href="http://forums.creative.com/t5/Sound-Blaster/SB-Audigy-Series-Support-Pack-3-6--09-2009/m-p/540934"]http://forums.creative.com/t5/Sound-Blaster/SB-Audigy-Series-Support-Pack-3-6--09-2009/m-p/540934[/url]

Latest Drivers +Ctaud2k.

OK so after quite a while of enjoying my audigy 2 card, I install the latest drivers and i suddenly got thrown into BSOD funk.
Similar to this thread:
http://forums.creative.com/creativel...d=284065#M7680
Now of course, this is around the same time as the latest nvidia drivers are getting screamed about, so I'm skeptical as to what's going on. In game, surfing the net, moving the mouse over shockwave, random times it would just decide to blue screen me. And it appeared that it had to do with sound. i.e., i switch from internal to external view in a game, which changes sound, and BOOM. The shockwave site I move the mouse which triggers a sound in the presentation and boom. Very weird. *shrug*
Long story short, I tried a bunch of stuff...including rollbacks, system restores, etc...which seemed to really mix up the sound drivers. It would roll back some, but the driver in dxdoag would read a different date than the rest, etc....just blowing me away - so I ended up just doing an XP repair. Then I'd get repeated BSOD's on the XP-repair/install, consistently blaming the ctaud2k.sys file........which i narrow down is the audigy driver. :mansurprised: Interesting.......So I end up having to remove the card for it to finish the XP install, which it does like a charm the first try after removing the card, and then put it back in when XP is a-ok.
Now I'm back to my original disc drivers when i first got the card, i believe jan 2003 drivers. I'd like to reinstall the latest but I'm wondering if anyone else has had issues with the most recent drivers or am I just special? Which wouldnt be the first time.
I may try to install the latest driver release prior to the most recent release, but of course any time I do a tech support request w/a game developer or whathave you, they're going to tell me to install the most recent drivers first before giving me the light of day. So basically, just polling the audience here to see if there's a known issue or what.... Thanks for whatever help anyone might have....
System specs....
Asus P4P800
Intel Pentium 4 3.0GHZ w/HT(on)
WD 7200 RPM 80GB
WD 7200 RPM 40GB
GeForce 6600GT (back to 66.93)
Creaitve Audigy 2
GIG Crucial 3200 DDR
Antec TruPower 430W
Windows XP - SP2
DirectX 9.0c
WMP 0
Message Edited by XFactor on <SPAN class=date_text>04-07-2005 <SPAN class=time_text>08:24 PM
Message Edited by XFactor on 04-07-2005 08:33 PM

Set the number of channel ? Hardware mixed channels are fixed (because they are hardware obvioulsy).
Why don't you uninstall your drivers and reinstall Li'veDrvPack + what you need ?
You can see how many channels your card is capable on many diagnostic program like sandra, or on applications like winamp, and on some game setup.

I upgraded my 2g 8gb itouch to 4.2.1, now itunes will not recognise it. i do have all the latest drivers installed

i have tried everything. I have all the latest drivers and the latest i tunes. I have restarted everything the forums have said. still no joy. My laptop recognises the ipod but not itunes. what can i do?

If you did all the troubleshooting here, iOS: Device not recognized in iTunes for Windows, did you also try to remove all Apple related software and reinstall iTunes again? Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

Trying to install the latest Sound Blaster Audigy 2 ZS drivers do not inst

I have tried the autoupdate feature here it says I have installed (Sound Blaster Audigy 2 ZS, DR release .84.0). I downloaed the 3 latest drivers for my SOund Card (SBA2_EAX4DRV_0303.exe, sba2_pcwdrv_lb__84_55-r.exe and SBA2_BETADRV_US_2_05_0000.exe) when I try to install these it tells me I do not have a Audigy 2 Sound Card and goes no further, can anyone please explain why?
Thank you.

If you're using a dynamic microphone, the Audigy 2 ZS dri've bay has a jumper which you can change for it to support dynamic microphones instead of electret microphones. However once this is done you won't be able to use electret mics until you've changed the jumper setting back.

Latest drivers from Creative and Logitech z- 560's

Hi I have the latest drivers from Creative for my Audigy 2 card running Windows 7 ,but now only my right front and rear left are working , I tried many things but no go any ideas?Thks

Seriously though, this board is lit up with people completely floored that Creative has stopped supporting their hardware with up to date drivers.
Great work Creative!
People... These days hardware resources are not much to ask from today's motherboards. Performance hit's Nope.
Suggestion... stick with the mobo audio and shut Creative down. What are they going to rely on for revenue if people are not buying SB cards? The Zen? Haaa!
Make some stocks drop, and show Creative where the power is behind their lame a$$ company... DON'T BUY CREATIVE!

Audigy 4 - Vista drivers and software urgently nee

you know... i have this sound card (Audigy 4 - non pro) for over one year now, AND i don`t have a good driver and software for windows vista home premium x64. last driver for this sound card is:
. Creative Sound Blaster Audigy series Vista Driver 2.2.0002 (38.30 MB) 6 Mar 07.
i mean... 6 mar. 07
how long do i have to wait for you, to relase all the software it is on windows xp oh, this audigy 4 was not intended to use with vista, wright and you want everybody to buy that x-fi sound card with another set of problems in windows vista. nice marketing solution. good for you ONLY.
i`m just tired waiting. my card doesn`t work as it should, nor as it worked in windows xp.
i need all that software. all of it, working under vista. PRONTO!
you will provide that software, or you just lost me as a customer, and along with me, alot more.
btw, daniel_k was only helping people, by providing drivers and software YOU couldn`t, or you just didn`t wanted to. stop deleting his posts or links to the drivers made by him.
just stop that abbusi've marketing strategy, by not releasing software for older sound cards, and forcing customers to buy your new products. no, that wouldn`t happend.

http://forums.creative.com/showthread.php?

Latest drivers and audigy applicati

Similar Messages

Maybe you are looking for