Latest end to occur a second time

Hello,
We're on SRM 4.0
In the approval step of our workflow we have added 'latest end' work item creation when it reaches latest end date.
This creates only one new work item after for example after 10 days. How can we add another reminder like this after 20 days?
Thanks
Laurent.

Hello Masayuki,
Yes this is almost what i did.
I've set Latest start = 10, latest end = 20 days.
I didn't test but max. would be 3 reminders i think...
Regards,
Laurent.

Similar Messages

TS2972 Bug:How can Home sharing be turned off and all items in my library cleared without my intervention? This is the SECOND time this happens since end of March 2013. A permanent solution will be appreciated

Bug:How can Home sharing be turned off and all items in my library cleared without my intervention? This is the SECOND time this happens since end of March 2013. A permanent solution will be appreciated

See this post.
Assuming AVG is involved there is a new patch which may resolve the issue. Update AVg before attempting to recover the library.
tt2

Deadline moniter - Dynamic latest start / latest end date and time

Hi all,
My requirement is to have the latest start and latest end time made dynamic. This is because each Personnel area or business unit has different requirements as to when they the notification and escalation to happen.
For example -
Business unit 1 wants escalation to happen after 5 days where as Business unit 2 wants escalation in 2 days itself.
Any ideas here

Hi,
You can create a method in your BO to calculate the date for calculating deadline and pass it on to the workflow .....
Calculate the date as per your requirement and later populate it in the deadline step using the EXP expression
for eg. if you have 5 days calculate the date as per 5 days and time 1 min etc...
Regards
Gautam
Edited by: gautam maini on Aug 18, 2011 9:06 PM

Updated Latest End Time in workflow builder but change not taking place

Hello everyone,
In our existing leave application workflow (working fine for many years), we have set a deadline monitoring of Work Item Creation (WIS) + 10 days to send an email back to the applicant if his or her leave application wasn't acted upon by his/her supervisor.
Recently we have made some changes to the leave program and are required to test this deadline monitoring. In development environment instead of waiting for 10 days, we updated the Time field in the Latest End tab to 3 mins and then we generate and activate the workflow (through the Activation submenu in the Workflow menu).
Problem 1: But when the leave program generate the work item, inside the work item the Latest End date and time still show as WIS + 10 days, instead of WIS + 3 mins. We have already run SWU_OBUF and also refresh the organizational environment through SWUS but still to no avail.
Problem 2: When we change the Latest End date of the workitem to trigger the deadline monitoring, nothing happens even though the deadline monitoring batch job (SWWCOND & SWWDHEX) is already running successfully every 3 mins. In the executed action it just show 'Deadline reached' and the work item is in READY status.
In our work flow we have the process control to set the work item to obsolete. Really appreciate for any advice. Thanks.

Hi Rick,
Sorry, wrong choice of word. What i'm trying to say is as we don't have a workflow expert on our site, me and my colleague were a bit hesitant to manually change the work item deadline. But i see the benefit in doing that. At least now we know that changing the work item deadline would not affect the triggering of the deadline monitoring.
Hi Viji,
We haven't tied the changed workflow template to any transport request yet as we wanted to test it out in development environment first.
Sorry but how do i check if the outcome is active?
Hi Rob,
We didn't do any import. Since we're testing the changes in dev, we're directly changing the workflow template and activating it without tagging it to any transport request. But thanks for letting us know about table HRS1205, will give it a look tomorrow afternoon.
And also we're generating new work item for our testing. That's why we were surprise the new work item is still not picking up the WIS+3 mins latest end date.

Can apple fix my ipad2 twice for free this is the second time my ipad2 screen broke, now dont calle me careless brother begs and cries and it's frustrating, all he wants is thomas and friends so i end up getting forced to give it to him, i didnt know.

can apple fix my ipad2 twice for free this is the second time my ipad2 screen broke, now dont calle me careless my 3 yr old brother begs and cries and it's frustrating, all he wants is thomas and friends so i end up getting forced to give it to him, i didnt know my brother was still playing with the ipad , and i was watching tv, so my dad comes up it was lying in the floor next to my bro, u couldnt believe how i cried that time because second time...... my mom was very very dissapointed , and so am i , so will apple be able to fix my 1pad 2 wifi only16 gb for free again, i barely have enough money to repair, because my mom brought another one. im really sad bc it took alot of sacrifice from my parents to buy me this ipad, i dont think i deserved that : ( plz help , or give me any other options.

If you mean your iPad got stepped on and the screen physically broke, I think it extremely unlikely that Apple will replace it again for free. They weren't obligated to do so the first time, as apparently they did, and almost certainly not going to do so twice.
Sorry, but I think you'll just have to live without your iPad until such time as you can save up enough money to pay for repairs. There are independent iPad repair services that may be able to replace the screen for less than Apple's replacement charge, though I can't say with certainty. Do a web search for "ipad repair".
Regards.

ITunes 10.5.2.11 doesn't launch for the second time on Windows 7, 64 bit.

I have iTunes 10.5.2.11(The latest as of now) on a WIndows 7, 64 bit PC. iTunes launches itself properly for the first time after my system boots, but, when I close iTunes and try to open it once again(without booting again), it's like the computer didn't get my instruction, the iTunes icon only clicks, but, it doesn't open. When I check the running programs with the Task Manager, iTunes isn't there. But, in processes, iTunes *32 is listed(This is after I tried launching it for the second time). If I end this process(and also the process tree), and then try to open iTunes, the window of iTunes appears, but, it just sits there like a brick!
Can somebody please help me. Thank you.

I have iTunes 10.5.2.11(The latest as of now) on a WIndows 7, 64 bit PC. iTunes launches itself properly for the first time after my system boots, but, when I close iTunes and try to open it once again(without booting again), it's like the computer didn't get my instruction, the iTunes icon only clicks, but, it doesn't open. When I check the running programs with the Task Manager, iTunes isn't there. But, in processes, iTunes *32 is listed(This is after I tried launching it for the second time). If I end this process(and also the process tree), and then try to open iTunes, the window of iTunes appears, but, it just sits there like a brick!
Can somebody please help me. Thank you.

GoToAndPlay doesn't work second time

I have made a simple animation using only the timeline. The animation is covered by a button "Knapp" (alpha 0) wich activates the actions. The whole thing works fine the first time. The last action says go to and play frame 2, wich has two actions: stop + go to and play frame 4. But this action does not work the second time. I tried to set the action to frame 3 instead of 2 and the same problem occured on another action on the timeline as well.
Here is the last action on my timeline:
Knapp.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndPlayFromFrame_11);
function fl_ClickToGoToAndPlayFromFrame_11(event:MouseEvent):void
gotoAndPlay(2);
This is the action on frame 2 (I have removed the instructions):
stop();
Knapp.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndPlayFromFrame);
function fl_ClickToGoToAndPlayFromFrame(event:MouseEvent):void
gotoAndPlay(4);

Thanks. When I read your answer I discovered "Knapp" was divided in two keyframes. But after i fixed it, it still doesn't work. I have got the animation to end at frame 1 now, after removing the "goto"-action in the last frame, hoping the animation would loop. But it still doesn't continue to frame 2 and follow the same actions as before. It stops at frame 1. I have tryed to use another action in frame 1 to make it play frame 2, but without success. Irritating. Other suggestions?

New iPad (3) frozen second time...

Hello, it just happened now. My mom was playing angry birds on my new iPad and when she tried to switch to another game, unblock me, a simple puzzle game, not very graphic intensive, my iPad froze. This has happened second time now and I am kind of worried now.
First time it happened when my friend was playing 'The End' game. It froze and when I pushed sleep key, even the slide unlock key was not working. I had to restart the iPad by holding lock and home key together and to wait for apple logo to shine again.
From the day one I've also noticed that the spotlight search also lags every time and swipe it. I've bought this iPad only for work, I'm not even using any heavy apps or rating games like infinity blade etc. I don't even think I've ever used the hardware to its fullest ever.
When I buy an iPad I expect it to never freeze or hang, or I'd have bought an android, right?
So I wanted to know if this is a major problem? Should I get mine iPad replaced?
How to check if my model is faulty?
I don't really think the iStore will help me much as the guys working there sounded pretty noob, I had to tell them about the new iPad and what it could possibly do etc.
Thanks for your time.

If you are concerned Restore your device and setup as a new device. Follow the instructions here - http://support.apple.com/kb/HT1414
iOS for me hardly freezes. If it freezes too much, that means I need to do a restore to place a fresh OS on the device. It does lag when swiping to Spotlight, I believe it is because the system is pulling up a database index of everything on the device. I cannot confirm that though.
Your expectations are a bit high in terms of never becoming unresponsive, though I believe you are right that it should not occur often. This is not a major problem. First follow the above instructions of restoring the device. If the device continues to become unresponsive multiple times per week or month, then that's when you should have yours checked.
I would not discount the Apple Store employees. If the problem continues to happen often after trying a restore, I would make an appointment with the Genius bar so the issue can be documented and cite that you have done a restore of a new device. If problems then continue then go in again even if you underestimate their knowledge, as the team is there to help you keep going. They can then verify that you have come in before and alternate solutions can be made. You are not working with just one person at an Apple Store as you can always question and ask for different solutions from the employees because they should be willing to find the solution that makes you the happiest.

Help! I've deleted my voice memos playlist on iTunes. How do I transfer my voice memos on my iPhone to iTunes for a second time?

Help! I've deleted my voice memos playlist on iTunes. How do I transfer my voice memos on my iPhone to iTunes for a second time?

You need to have the latest version of iTunes on the computer, version 11.1.3 to be able to handle syncing a newer phone with iOS 7. The iTunes on the iPhone has nothing to do with syncing and is installed by the iOS.
Go to iTunes on the computer, click on Help, Check for updates to update iTunes on the computer, or go to to www.apple.com/itunes/download and download and install the latest version of iTunes to correct your problem.

2009 MBP can't see internal hard drive - for the second time!

Well, my 2009 13" MBP is at Applecare for the second time because it cannot recognize _any_ internal hard drive.
The first repair came at 9 months (purchased new), now 16 months later I have the same issue.
Swap in a known good drive, it can't see it, boot from DVD, and run Disk Utility, it can't see it either (optical drive shows up fine)
My first repair only said they replaced the original hard drive, has anyone else had the issue of losing access to your internal hard drive?
Ugh, I will be out of the 3 year Applecare next summer, and don't want to get stuck with another iBook G3, if you know what I mean.
Thanks for any feedback!

Hi
I have the same issue, I have a Vodafone branded Huawei HG556a with an external drive connected. I have found that it isn't possible to connect via Finder and that SMB doesn't work either. The only way I could connect to it was via FTP using Cyberduck (or Filezilla), but no use as I can't add my media files from the drive to iTunes, so unfortunately disappointing. I'm still looking, but here's the document I was referred too from another forum.
broadband.vodafone.ie/download/files/storage_mac.pdf
Although not an answer to your question, hopefully this will give you an idea why you are getting the password and username errors when you know they are correct. In the end when I entered the FTP details into Cyberduck I was able to connect.
I know this doesn't help solve the problem (as I'm still looking too), but at leas you know why (ish).
Cheers
Topes

Adding a second time capsule?

I've reviewed some of he discussion on adding a second Time Machine but two issues arise. The information relates to older Time Machine software and leads to confusion.
I have an Airport Extreme with S/W version 7.6.4 and would like to add a newer Airport Extreme to back up the older one. Reading the suggestions on adding a new TC didn't cover the newer Time Machines and I could find Apple's instructions for doing it.
Somewhere I read that the new TC could be connected to the old TC but forgot the port setup. Also, newer instructions for adding a second TC so both the old and the new acquire the same data could not be found.
Hope This question is clear. Is there help on this?

The network setup is fairly trivial.
Plug TC2 into TC1. (the hardware is Time Capsule.. TC as per your title.. or is it Airport Extreme as per your question..?? Time Machine is software on your computer.. and totally unrelated to the hardware.)
Makes no difference which way around you do it. Plug WAN of the 2nd device into LAN of the 1st device. And setup the 2nd device in bridge.. wireless is up to you.. off or on?? Roaming or not??
As far as backup is concerned.. you need to be clear in the question. And sorry it is a bit mixed up now.
But I can tell you what you cannot do.
You cannot backup to both units at once. You can however setup Time Machine in the computer to backup sequentially to both.
See Q34 http://pondini.org/TM/FAQ.html
The TC itself cannot backup to another TC.
(extreme with hard disk amounts to the same thing.. with caveats)
You can backup one TC to another manually via a computer.. it is slow and I do not recommend it.. if a fault creeps into backup1, you are simply copying said fault to backup2.. AND it is poor for another reason.. Time Machine cannot do it.. you will need another utility eg Carbon Copy Cloner.. and even then you will probably end up backing up a huge amount of data every time.. since TM works so strangely you cannot just backup differences.

Unable to do second time MIGO

Dear friends,
I have an issue at mu client's place wrt MIGO.
A PO was created and partial inward of goods has happened.. now for the second time when goods have to be inwarded an ABAP RUNTIME ERROR has occured as below:
Overflow for arithmetical operation (type P) in program "SAPLJ1IEX"
Please provide your valuable inputs and guide me to help resolve .
thanks in advance
nandu

Is this dump seen only for Imports PO? Are you using CVD condition
which are defined as "Fixed amount" rather than "Percentage" conditions?
Please check for the application of the following notes:
1040500 Dump in MIGO and J1IEX for Imports Purchase Order
1125359 Excise duty rate not flowing in J1IEX and MIGO for Import PO
This dump occurs typically for an imports PO, where the BED rate goes
beyond 999%...or runs into infinite decimals. You need to concentrate
on the formula given below, where the value for es_exitem-bedrate should
not exceed 999%...this would typically happen when the BED/CVD value
is higher than the excise base value...
es_exitem-bedrate = ( es_exitem-exbed /
                      es_exitem-exbas ) * 100.
Kindly check in your system if BED value is greater than the excise base
value. Please note that excise base cannot be smaller than the excise
amount/BED value. This will result in dump. here is no solution for this. The only way to avoid the dump is by
nsuring that the base value is always more than BED/CVD value.

My ipod suddenly rebooted for a second time, also problems with turning on

My 32gb ipod touch has been having problems recently. Sometimes when I have no music playing and I sleep it, it just turns off. Sometimes when I have no music playing and I sleep it, it goes to the last thing I was doing (without going to the password screen), shows a loading sign, then turns off. Also, When loading something, the ipod sometimes freezes and the song is like a broken record. Also, to turn on my ipod I have to turn it on once, hold down the home and sleep buttons for ten seconds, then turn it on again, then I have to wait an average of four minutes. So today (this also happened two weeks ago) my ipod froze while my music was paused. I tried turning it on again the usual way, but that didn't work. I left it alone while it had the apple logo on it. I came back and found the screen off, which usually means that it turned on finally and was just auto locked. But then the screen came up from when I first got the ipod, with the symbol of the connector cable going towards the itunes symbol. As i mentioned before, this happened two weeks ago, and I had to resync everything, and I lost all the data and save files for all my games. Also, I have downloaded a lot more apps since I rebooted it last time, and I never synced them to the computer. Before wasting my time again, I want to know if there's anything wrong with my ipod.

The only way to turn off the ipod is to use the sleep/wake button and then turning the red slider. The only setting to switch it off automatically would be the Timer function:
Timer
Set the timer: Tap Timer, then flick to set the number of hours and minutes. Tap Start to start the timer.
Choose the sound: Tap When Timer Ends.
Set a sleep timer: Set the timer, then tap When Timer Ends and choose Sleep iPod.
When you set a sleep timer, iPod touch stops playing music or video when the timer ends.
If you start the timer and go to another iPod touch application, the timer continues
running in the background. (user guide page 89)
And if the batteries are almost empty the ipod will turn off by itself and you will have difficulties to start it up again until you charged it a couple of minutes.

Select Query taking long time to run second time

Hi All,
I have Oracle 11gR1 in windows server 2008 R2 .
I have some tables with 10 million records . When i run the select query for those tables first time it gives me result in 15 seconds but if i am running the same script second time from the same session I am getting the result in 15 minutes to complete ..
Why it is happening? What may be the solution for this ?
Thanks & Regards,
Vikash jain(Junior DBA)

Hi Mohamed,
I just saw that both the times for the same query execution plan is different ..
here are the details :
First time Second Time
g84m3qqjv2p3q g84m3qqjv2p3q
2733045235 1310485984
So plz tell me how should i force database to use the first execution plan ?
I got this script for forcing the Db to use the same execution plan
accept sql_id -
prompt 'Enter value for sql_id: ' -
default 'X0X0X0X0'
accept plan_hash_value -
prompt 'Enter value for plan_hash_value: ' -
default 'X0X0X0X0'
accept fixed -
prompt 'Enter value for fixed (NO): ' -
default 'NO'
accept enabled -
prompt 'Enter value for enabled (YES): ' -
default 'YES'
accept plan_name -
prompt 'Enter value for plan_name (ID_sqlid_planhashvalue): ' -
default 'X0X0X0X0'
set feedback off
set sqlblanklines on
set serveroutput on
declare
l_plan_name varchar2(40);
l_old_plan_name varchar2(40);
l_sql_handle varchar2(40);
ret binary_integer;
l_sql_id varchar2(13);
l_plan_hash_value number;
l_fixed varchar2(3);
l_enabled varchar2(3);
major_release varchar2(3);
minor_release varchar2(3);
begin
select regexp_replace(version,'\..*'), regexp_substr(version,'[0-9]+',1,2) into major_release, minor_release from v$instance;
minor_release := 2;
l_sql_id := '&&sql_id';
l_plan_hash_value := to_number('&&plan_hash_value');
l_fixed := '&&fixed';
l_enabled := '&&enabled';
ret := dbms_spm.load_plans_from_cursor_cache(
sql_id=>l_sql_id,
plan_hash_value=>l_plan_hash_value,
fixed=>l_fixed,
enabled=>l_enabled);
if minor_release = '1' then
-- 11gR1 has a bug that prevents renaming Baselines
dbms_output.put_line(' ');
dbms_output.put_line('Baseline created.');
dbms_output.put_line(' ');
else
-- This statements looks for Baselines create in the last 4 seconds
select sql_handle, plan_name,
decode('&&plan_name','X0X0X0X0','SQLID_'||'&&sql_id'||'_'||'&&plan_hash_value','&&plan_name')
into l_sql_handle, l_old_plan_name, l_plan_name
from dba_sql_plan_baselines spb
where created > sysdate-(1/24/60/15);
ret := dbms_spm.alter_sql_plan_baseline(
sql_handle=>l_sql_handle,
plan_name=>l_old_plan_name,
attribute_name=>'PLAN_NAME',
attribute_value=>l_plan_name);
dbms_output.put_line(' ');
dbms_output.put_line('Baseline '||upper(l_plan_name)||' created.');
dbms_output.put_line(' ');
end if;
end;
undef sql_id
undef plan_hash_value
undef plan_name
undef fixed
set feedback on
Output:
Enter value for sql_id: g84m3qqjv2p3q
Enter value for plan_hash_value: 2733045235
Enter value for fixed (NO):
Enter value for enabled (YES):
Enter value for plan_name (ID_sqlid_planhashvalue): g84m3qqjv2p3q
old 16: l_sql_id := '&&sql_id';
new 16: l_sql_id := 'g84m3qqjv2p3q';
old 17: l_plan_hash_value := to_number('&&plan_hash_value');
new 17: l_plan_hash_value := to_number('2733045235');
old 18: l_fixed := '&&fixed';
new 18: l_fixed := 'NO';
old 19: l_enabled := '&&enabled';
new 19: l_enabled := 'YES';
old 40: decode('&&plan_name','X0X0X0X0','SQLID_'||'&&sql_id'||'_'||'&&plan_hash_value','&&plan_name')
new 40: decode('g84m3qqjv2p3q','X0X0X0X0','SQLID_'||'g84m3qqjv2p3q'||'_'||'2733045235','g84m3qqjv2p3q')
declare
ERROR at line 1:
ORA-01403: no data found
ORA-06512: at line 39
Kindly help me to resolve the issue ..
Thanks & Regards,
Vikash Jain(Junior DBA)

Error in Dynamic deadline Latest end

Hi Experts,
                  I am facing an issue while usind latest end deadline. I have to set deadlines based on manager level, I used the Leatest End deadline with expression. In a background methood I am calculating the date and time based on manager level. and passing this date and time to workflow. In the next step I am using these date and times in the latestend expression.
Here I am getting an error " Error in determining the deadline." in GET_TIMESTAMP_VIA_EXPRESSION.
I am using the reference fields are begda and sy-uzeit.
Please suggest me how to overcome this issue.
Regards.
Ranganadh.

Hi Pavan,
              Thank you for the reply. I have changed the reference parameters as u suggested. but still I am getting the same error.
below I am giveng you the errors that displayed in workflow log. Please checkit out and let me know where I am going wrong.
In the step history of the workflow log:
Executed on                                                                                Error Message
Result Processing                                                                              No Errors
Result Processing                                                                              Error during result processing of workitem 404671
Process_Node                                                                                Error when processing node ''0000000013"
Create                                                                                Error when creating a component of type 'Step'
    Create_WIM_handle                                                                      Error when creating a workitem
      Create_Via_WFM                                                                        Deadline determination failed
         get_timestamp_via_expression                                               Date LE is nota valid (Plausibility check not found)
In the method I have written the code like this
If HR_LEVEL = 1.
   act_date = sy-datum + 30.
   act_time = '240000'.
endif.
swc_set_element container 'ACT_DATE' act_date.
swc_set_element contaienr 'ACT_TIME' act_time.
act_date and act_time are of date and time type references. and passing these values to WF.
and in the leatest end I am using these variables.
Please suggest me.
Regards.
Ranganadh.

Latest end to occur a second time

Similar Messages

Maybe you are looking for