Latest Firmware Update Issues with Screen Sensitivity

Hi All,
I synced my original iphone a few days ago and it required a firmware update. Since then, I have had numerous problems with the touchscreen for email and texting. Sometimes, I cannot open a folder on one of my emails or send a text because hitting the "send" icon does nothing. I've restarted my phone and reset it but have not yet tried a restore. Had anyone else had these issues?
And do you have any other suggestions I should try before doing a restore? Many thanks.
Kathy

Do not know about its compatibility and functionality.. but if you are OK with Beta softwares.. you may have a look at..
http://betalabs.nokia.com/blog/2011/03/16/nokia-software-updater-for-mac-available-in-beta?restsso_p...

Similar Messages

  • 6301 latest firmware update issue

    I've just updated my 6301's firmware from version 4.62 to 9.40 - it's on Orange UK. Since then every time I switch the phone on and log on to the network I get a text back from Orange 452, titled:
    "MyFaves Service"
    and the message is:
    "Sorry, country not recognised. Please check spelling and try again. Remember to use the full country name. You have not been charged for this message."
    Anyone any ideas on this one?

    At least they phoned you back, I'm still waiting for a call. It obviously depends on who you talk to at Nokia and Orange, clearly some appear to have access to more information than others (or go the extra mile) - or know where to look. Presumably as the problem has become more widely reported they have got more information, just not a fix yet.

  • Latest Skype update - issue with lost conversations and contacts

    Can anybody help with this problem?The new Skype layout looks like a classical Microsoft Office sotware (scroll-down menus from the top bar) and in spite of what was announced before installing the update, the damage to the history of conversations and contacts is massive!!!

    MMy iPhone was synced with my computer and the cloud. After re syncing, pics and contacts remain in cloud and computer but won't sync to my iPhone. Even my IT guy at work is stumped! I would love to have all my pics and contacts back on my phone. I have not yet updated my iPad d air because I'm afraid the same thing will happen.

  • Attempted Iphone 4 update to latest firmware update "failed"

    Ive attempted to update the Iphone to the latest firmware update  and it has failed 3 times, the final time it looked as though
    it worked but stopped and went into new mode to go-back to Restore to old  setting. Now it is locked up and asking me for the  admin backup password
    and everything I've tried is not working..  Not sure what to do at this point.
    The laptop I'm using is a Panasonic CF29 and running Windows XP with SP3 installed.
    I'm  open to any ideas at this point.
                Thanks Artman

    Then it's pretty hopeless. Normally the error message remains displayed until you click "OK", so it's surprising that you didn't see it. You can try the shotgun approach; just try a bunch of stuff in the hopes that it will work. But first I suggest trying to update it again, and this time watch it. The following list covers the most common causes of update failures:
    Open a Command window and type the command "netsh   winsock   reset"
    Reboot your computer
    Disable your antivirus and firewall
    Launch iTunes
    Connect the phone using a USB port directly on the computer, not a hub
    When the phone is recognized in iTunes click on it, then click Restore
    If the phone is NOT recognized in iTunes, disconnect it, the hold the HOME and SLEEP buttons for exactly 10 seconds until the screen goes black, then release SLEEP but continue holding HOME while you connect the cable and continue holding HOME until iTunes recognizes a phone in recovery mode
    If the update completes you are in business
    You mentioned being prompted for a backup password. If your backup is encrypted you will need to know the password to complete the restore; if you don't know it you will have to restore as New and manually add your content back. If it is encrypted you really did enter a password for it once, whether you remember doing so or not.

  • Mid 2006 iMac Boot Problem (Since latest firmware update)

    I have a Mid 2006 17" iMac. Ever since the latest firmware update in early December, about every other startup I've been having boot problems. After the white screen with the Apple Logo and the spinning wheel it goes to a blue screen like normal, but instead of the 'Loading Mac OS X' white window popping up it stays blue and the spinning loading wheel starts. I've left it loading for quite a while before and nothing changes. I have to do a force shut off by holding the power button. and then I start it up and it will boot normally.
    Any help would be appreciated.
    Thanks!

    Actually, I think it'san early 2006.

  • IMovie Preview Not Working since latest Firmware Update (11/14/2006)

    I was working on an iMovie project without incident until an automatic Firmware update was completed. Since the update, the editing preview function of iMovie is a black screen. The movie plays, but when you attempt to edit the Ken Burns effects, etc ... the preview screen is black so you are unable to edit a viewable screen. Strange ... anyone else - post firmware update issues on the MacBook Pro?

    (Quoting Karl Petersen here:)
    There's a bug in iMovie 6 that makes it impossible to re-edit (Update) photo clips previously imported with the Ken Burns checkbox ON. The source photo, normally stored in the Media folder of the project, is (inappropriately) discarded when you empty the iMovie trash. The clips Update as black clips and the preview is usually black too, if I recall.
    The workaround is to 1) drag the photo from the iMovie trash to the iMovie Clips pane; or 2) never empty the iMovie trash.
    Sue

  • HT3728 Does factory reset go back to latest firmware update.

    I have resently updated my airport express to latest firmware. The airport express is configured as an extension to my wifi with an Extreme as main device.
    Shortly after the firmware update (1-2 days) the express stopped working and status light turned yellow.
    I have since then tried to do factory reset several times without getting the device up and running again.
    When doing factory reset the status light turns yellow after releasing the button and stays amber with short interval with green (1 second every minute or so)
    I have not been able to discover the express from my iPad, iPone or iMac again.
    Could the reaons be latest firmware update?
    Any advice to get it back to normal?
    Thanks,
    Per

    Does factory reset go back to the latest firmware update.
    A Factory Default Reset will not affect the installed firmware.
    Shortly after the firmware update (1-2 days) the express stopped working and status light turned yellow.
    A solid amber light is unfortunately an indication that the internal power supply inside the AirPort Express is failing, or has failed.
    I have since then tried to do factory reset several times without getting the device up and running again.
    The AirPort Express has failed, and will need to be replaced.
    When doing factory reset the status light turns yellow after releasing the button and stays amber with short interval with green (1 second every minute or so)
    This is yet another confirmation that the Express has failed, and will need to be replaced.

  • HT201210 I accidently unplugged my I-pad 2 from my computer during the latest software update.  My screen is stuck on the "update bar" screen.

    I accidently unplugged my I-pad 2 from my computer during the latest software update and my screen is stuck on the "apple with update bar."
    Suggestions?

    Try and force the iPad into Recovery Mode
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: Data will be lost. You may have to repeat the above many times.

  • Internet stopped working on MBA after latest firmware update. Help please!!!

    Internet stopped working after installing the latest firmware update. WiFi still connects to router, our other mac desktop still connects to internet as usual (same network). I can't even re-install the MBA OS since it needs an internet connection!!!
    Any ideas?

    FIXED.
    I swapped our wireless router for a newer one, internet seems to work fine again (we were sent a new one by our internet provider which we never set up until now).

  • Zen Touch latest Firmware Update...player not connec

    I tried installing the latest Firmware update for my Zen Touch (released 2-09).
    The player is connected and recognized by Windows and the Media Explorer. However, when I try to install the new Firmware it keeps saying "player not connected".
    I tried d/l two different language packages cause I wasn't sure what counted - player language or operating system langauge. Anyway, that didn't make a difference.
    So what do I do? I have no idea where to start. It's firmware for the correct device connected through Windows XP.
    I have made a firmware update before, which worked fine. After that I updated the media explorer software.
    Help is very much appreciated! Thank you in advance.
    -tina-Message Edited by tinas on 2-0-2005 08:56 PMMessage Edited by tinas on 2-0-2005 09:00 PM

    Perhaps it's worth making sure no software is using the player, so reboot the PC, and turn off the Creative Detector. Then try again.
    Are you trying to upgrade to the .0.03 version?

  • Can't send mail after latest firmware update

    My outgoing mail won't go out after the latest firmware update. I have 4 different accounts and none are working. Tried in various locations. Any ideas would be appreciated. Thanks

    Was this for 10.5.8???
    Others have reported it for 10.6.8 & up...
    http://x704.net/bbs/viewtopic.php?f=12&t=6118

  • Where is the forum for Windows Update issues with Windows 10 TP 9926

    Trying to find a fix to the Windows Update issue with Windows 10 TP 9926 build and can't find the correct forum to post this question?
    This will impact receiving the new build upgrades and will impact test strategy for the new supported OS in our desktop application.

    Might try them over here.
    http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_update?sort=lastreplydate&dir=desc&tab=Threads&status=&mod=&modAge=&advFil=&postedAfter=&postedBefore=&threadType=All&tm=1427037339534
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • Just tried to install the latest firmware version and the screen has been grey for the last 30 mins

    Just tried to install the latest firmware version and the screen has been grey for the last 30 mins, any ideas what to do now?

    ..Step by Step to fix your Mac

  • Do firmware updates come with Software Update and installed automatically?

    Do firmware updates come with Software Update and installed automatically?

    Do firmware updates come with Software Update
    Yes.
    and installed automatically?
    No (at least, I can't think of one that has automatically run). Usually Software Update will download an updater that you then need to run separately. Usually the updaters will be installed to the Utilities folder ready for you to use.

  • Latest firmware update and more problems with 30" external displays?

    Hello,
    New macbook pro user since a few weeks, so first post here.
    I'm aware of various issues with the displayport to dual-dvi adapter, especially with 30" 2560x1600 monitors. All threads I've found on are 1-3 years old though.
    I got my 17" macbook pro a few weeks ago and I've had very few problems running my 30" dell 3008wfp as external screen. I had issues at times getting it to work after boot up, with blackout and various errors (problems I've read about in older threads), but once stable it would work without issues for days.
    Yesterday the macbook found and installed a new firmware update, and wow, all **** broke lose. The external screen won't run at 2650x1600 for more than a minute before blacking out or suffering major graphical errors. Ironically one of the key points in the firmware update is better support for external monitors...
    It will run nice and stable mirrored at 1920x1200, but not at 2650x1600.
    Is anyone else in a similar situation after the latest update?

    Hello,
    New macbook pro user since a few weeks, so first post here.
    I'm aware of various issues with the displayport to dual-dvi adapter, especially with 30" 2560x1600 monitors. All threads I've found on are 1-3 years old though.
    I got my 17" macbook pro a few weeks ago and I've had very few problems running my 30" dell 3008wfp as external screen. I had issues at times getting it to work after boot up, with blackout and various errors (problems I've read about in older threads), but once stable it would work without issues for days.
    Yesterday the macbook found and installed a new firmware update, and wow, all **** broke lose. The external screen won't run at 2650x1600 for more than a minute before blacking out or suffering major graphical errors. Ironically one of the key points in the firmware update is better support for external monitors...
    It will run nice and stable mirrored at 1920x1200, but not at 2650x1600.
    Is anyone else in a similar situation after the latest update?

Maybe you are looking for