Latest firmware

For the HP Officejet Pro 8600 e-All-in-One Printer - N911a, which is the latest firmware version: CLP1CN1416AR or VersionCLP1CN1322CR, 29.13M?
This question was solved.
View Solution.

My original response to this is below. But since this response, I've found out the information I provided is incorrect. This is the correct response:
"I have to apologize - as I gave you incorrect information. I was able to find out that the download on the HP site (Version CLP1CN1322CR) dated July 18, 2014) IS the most recent download. The other version (CLP1CN1416AR) was briefly posted on the site, but removed and replaced with CLP1CN1322CR. My understanding is that version (CLP1CN1416AR) is currently being removed from any future automatic updates. I'm really sorry for the confusion!"
Previous incorrect response:
Hi there,
Based on some research I've done, CLP1CN1416AR is the newest version. I'm not sure why it is not publishing on the hp support site for download, but only available for automatic download. I will do some checking and try to find out (and get it posted, if it is a mistake) but it looks like CLP1CN1416AR is the latest version. Sorry for the confusion around that!
Thanks!
Tara
**Although I am an HP employee, I am speaking for myself and not for HP.

Similar Messages

My macbook pro screen remains grey after latest firmware update

i just had the update notification for the latest firmware, proceeded to do so, and the screen remains grey, its been more than one hour and still grey, since its a firmware update i don't want to disturb it, but could it be that is taking so long?

Reboot it by pressing the power button down hard to force a shutdown.
If your still having problems, take it to Apple. I hope you have AppleCare becuase if they can't fix it, it's a new logicboard.

HT3728 Does factory reset go back to latest firmware update.

I have resently updated my airport express to latest firmware. The airport express is configured as an extension to my wifi with an Extreme as main device.
Shortly after the firmware update (1-2 days) the express stopped working and status light turned yellow.
I have since then tried to do factory reset several times without getting the device up and running again.
When doing factory reset the status light turns yellow after releasing the button and stays amber with short interval with green (1 second every minute or so)
I have not been able to discover the express from my iPad, iPone or iMac again.
Could the reaons be latest firmware update?
Any advice to get it back to normal?
Thanks,
Per

Does factory reset go back to the latest firmware update.
A Factory Default Reset will not affect the installed firmware.
Shortly after the firmware update (1-2 days) the express stopped working and status light turned yellow.
A solid amber light is unfortunately an indication that the internal power supply inside the AirPort Express is failing, or has failed.
I have since then tried to do factory reset several times without getting the device up and running again.
The AirPort Express has failed, and will need to be replaced.
When doing factory reset the status light turns yellow after releasing the button and stays amber with short interval with green (1 second every minute or so)
This is yet another confirmation that the Express has failed, and will need to be replaced.

Internet stopped working on MBA after latest firmware update. Help please!!!

Internet stopped working after installing the latest firmware update. WiFi still connects to router, our other mac desktop still connects to internet as usual (same network). I can't even re-install the MBA OS since it needs an internet connection!!!
Any ideas?

FIXED.
I swapped our wireless router for a newer one, internet seems to work fine again (we were sent a new one by our internet provider which we never set up until now).

Attempted Iphone 4 update to latest firmware update "failed"

Ive attempted to update the Iphone to the latest firmware update and it has failed 3 times, the final time it looked as though
it worked but stopped and went into new mode to go-back to Restore to old setting. Now it is locked up and asking me for the admin backup password
and everything I've tried is not working.. Not sure what to do at this point.
The laptop I'm using is a Panasonic CF29 and running Windows XP with SP3 installed.
I'm open to any ideas at this point.
Thanks Artman

Then it's pretty hopeless. Normally the error message remains displayed until you click "OK", so it's surprising that you didn't see it. You can try the shotgun approach; just try a bunch of stuff in the hopes that it will work. But first I suggest trying to update it again, and this time watch it. The following list covers the most common causes of update failures:
Open a Command window and type the command "netsh winsock reset"
Reboot your computer
Disable your antivirus and firewall
Launch iTunes
Connect the phone using a USB port directly on the computer, not a hub
When the phone is recognized in iTunes click on it, then click Restore
If the phone is NOT recognized in iTunes, disconnect it, the hold the HOME and SLEEP buttons for exactly 10 seconds until the screen goes black, then release SLEEP but continue holding HOME while you connect the cable and continue holding HOME until iTunes recognizes a phone in recovery mode
If the update completes you are in business
You mentioned being prompted for a backup password. If your backup is encrypted you will need to know the password to complete the restore; if you don't know it you will have to restore as New and manually add your content back. If it is encrypted you really did enter a password for it once, whether you remember doing so or not.

Zen Touch latest Firmware Update...player not connec

I tried installing the latest Firmware update for my Zen Touch (released 2-09).
The player is connected and recognized by Windows and the Media Explorer. However, when I try to install the new Firmware it keeps saying "player not connected".
I tried d/l two different language packages cause I wasn't sure what counted - player language or operating system langauge. Anyway, that didn't make a difference.
So what do I do? I have no idea where to start. It's firmware for the correct device connected through Windows XP.
I have made a firmware update before, which worked fine. After that I updated the media explorer software.
Help is very much appreciated! Thank you in advance.
-tina-Message Edited by tinas on 2-0-2005 08:56 PMMessage Edited by tinas on 2-0-2005 09:00 PM

Perhaps it's worth making sure no software is using the player, so reboot the PC, and turn off the Creative Detector. Then try again.
Are you trying to upgrade to the .0.03 version?

TC issues after latest firmware update

Here is the skinny, my TC went through the normal firmware update a bit ago. Wednesday my Internet stopped working, when I use the Airport Utility app it showed the TC online, at first, then it gave me the error that the TC did not have a valid IP. Thought might have been a problem on my ISP's end so I grabbed another router and set it up Internet no problem. Has to be the new firmware right so I pushed the firmware back 3 versions, and still the same thing no valid IP but connected to the Internet but no HDD (Yes it said not a valid IP but connected to the Internet on one wireless PC). Everything else in the house would not connect to the TC they could see it but when you went to connect never asked for a password and I got the spindle of death type deal. I saved my settings and did a hard reset with the button on the back of the TC, started over and rebuilt the connection, same thing happened not a valid IP. I have read that Apple released 3 different firmware updates supposedly the last one works, it doesn't when I load the firmware I get the same error TC does not have a valid IP. I need some help, I have cycled through power down and power up situations over and over. Anyone have any other suggestions?

Need some more info.
What is the modem.. make and model?
Is it both modem and router or just a modem?
What is the actual model of the TC.. the number from the base.. A1xxx where the x are numbers.
The latest firmware is an issue.. that is 7.6.4 and you should go back to 7.6.1
But it does seem hard to get rid of properly.
I want you to do a factory reset not just a hard reset.
Universal Factory Reset.. any model TC or AE.
Unplug your TC/AE from power or turn off at the power point.
Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. (this is often difficult without a 2nd person or a 3rd arm).
Release it when the status light flashes rapidly. If it doesn’t flash rapidly you have missed it and try again.
Note..
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations of the router.
No files are deleted on the hard disk in a TC.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
Please redo the setup using all SMB names.. that is short, no spaces and purely alphanumeric characters.
eg TCgenx (use actual gen if you want) for base station name.
TCwifi for wireless name. (or TC24ghz and TC5ghz which is well worth naming both bands so you can test more carefully).
Please download and install a v5 utility on a computer if any of them use up to Mountain Lion.
Tell us what OS the computers are running and I can tell you how to install the old airport utility.
Test the TC in bridge to your other router is also a good alternative.

Latest firmware update and startup problems

Hi I have been reading all about this so-called firmware and its importance in keeping updated on my new macbook pro. Therefore I have been diligently trying to keep it updated over my dial-up connection. I installed the latest firmware as my automatic update suggested. Now I get the spinning startup circle of death. Tried booting in safe mode to no avail. Help? (I also have version cue installed.)

Hi jbell,
Firmware updates are not availible in Software Update, only sofware updates are. Did you Repair Permissions prior to and after updating software? You always should. Go to Applications-Utilities-Disk Utility, and highlight Mac OS X in the left hand column, then Repair Permissions below. Firmware updates are available here....
http://www.apple.com/support/downloads/macbookproearly2006firmwareupdate101.html
http://www.apple.com/support/downloads/macbookpro15inchsmcfirmwareupdate.html

Mid 2006 iMac Boot Problem (Since latest firmware update)

I have a Mid 2006 17" iMac. Ever since the latest firmware update in early December, about every other startup I've been having boot problems. After the white screen with the Apple Logo and the spinning wheel it goes to a blue screen like normal, but instead of the 'Loading Mac OS X' white window popping up it stays blue and the spinning loading wheel starts. I've left it loading for quite a while before and nothing changes. I have to do a force shut off by holding the power button. and then I start it up and it will boot normally.
Any help would be appreciated.
Thanks!

Actually, I think it'san early 2006.

Zen XTRA is completely dead after installing the latest firmware 2.10

Hello,?I have tried to install the latest firmware 2.0.03 to my Zen Xtra 60GB mp3 player. The installation process completed about 70%. As I understand, at that point the?new firmware was finally uploaded after a couple of player reboots. The?firmware installer was waiting with a message "Waiting for the player to reboot", and the player rebooted. But the firmware installer was waiting, and waiting... and after an hour I looked at the player and saw that it was not starting up at all. I removed the USB cable, stopped the firmware upgrade process and tried to reboot the player with reset; then I tried to access the recovery menu as described in the FAQ?- but no success. The player shows completely no response to any button presses, the LCD does not even flicker, the hard dri've does not power up - I don't hear it. Nothing happens, even if pressing the play/reset switch for fi've minutes. What's could be the matter? And more importantly, how can I get it working back again? I fear that the warranty has expired by now. Can anyone suggest what to do?I would be grateful for any ideas.

It is puzzling how some people including myself can upgrade thier firmware on thier devices and experience no problems at all during the procedure. Then theres others like yourself who would experience catastrophic events.
Since we all downloaded the firmware from the same place, and?alot of us didn't have any problems, it is?at least safe to say that there isn't anything?wrong?with the new firmware. Or else we'd all problems.
So for these devices that are failing, there must have been already a serious problem with them before the upgrade even started. The symptons just went unnoticed through every day normal use. And are only manifested through a reload/upgrade of firmware. Or something happened on the computer itself, during the transfer of data; auto file scanning virus protection comes to mind, or other programs or services running in the background that were taking up resources needed to make the upgrade go smoothly,?a USB cable with a short in it or a bad USB port. Who knows?!
If the player doesn't even start?up in?rescue mode then theres really nothing as a consumer you can do to fix it. You'd have to just see about getting it repaired, or replace it. I know yours is a 60GB, but?I gotta tell you the new 30GB Zen Vision M is a sweet deal!

After latest firmware update, AppleTV2 no longer sends signal

So I updated my AppleTV2 with the latest firmware, and now it no longer sends a signal out.
Has Apple stated when they're going to fix this?

MicroUSB cable doesn't fit in AppleTV2. Try again.
Edit: Apparently the MicroUSB cable I was trying to use wasn't 'micro' enough.
I'm now trying again with a MicroUSB cable used to recharge my Xbox 360 wireless headset. Heh... the irony is amusing.

Can't send mail after latest firmware update

My outgoing mail won't go out after the latest firmware update. I have 4 different accounts and none are working. Tried in various locations. Any ideas would be appreciated. Thanks

Was this for 10.5.8???
Others have reported it for 10.6.8 & up...
http://x704.net/bbs/viewtopic.php?f=12&t=6118

The bottom part of my iphone4 screen cannot tap.. restored 2 times with latest firmware and yet still the same..is it possible to fix this?how?

The bottom part of my iphone4 screen cannot tap.. I restored it 2 times with the latest firmware and yet still the same..is it possible to fix this?how? please guys help me =(

iPhone and iPod Touch: Troubleshooting touchscreen response: http://support.apple.com/kb/TS1827

Home hub 3b latest firmware

Hi got the home hub 3b last week having a look around home hub manager checking all the different settings come across firmware which is on Software version V100R001C01B031SP12_L_B last updated unknown, is this the latest firmware?
If not how often does it get updated and does having power save mode on midnight to 7am affect this in any way
Thanks jase.
Solved!
Go to Solution.

Hi Jaseb41,
I think the latest firmware version for the HomeHub 3 Type B is V100R001C01B031SP12 .
Having power save enabled shouldn't effect the upgrading of the home hub's firmware.
So according to your current firmware version and what the BT website says to be the latest version it seems your up-to-date.
If there is a new firmware for your HomeHub3b in the future then it will automatically be upgraded (and they are usually upgraded in batches over a period of time)
Hope that helps,
Cheers
jac_95 | BT.com Help Site | BT Service Status
Someone Solved Your Question?
Please let other members know by clicking on ’Mark as Accepted Solution’
Try a Search
See if someone in the community had the same problem and how they got it resolved.

How to upgdare my N95 to the latest Firmware ? hel...

hello
I have a Nokia N95 v11.0.026
And i want to upgrade it to the latest Firmware .
Please can you tell what what is the last one + how to update my phone ?
Thank you all

Thanks for your reply .
When i typed my Code to see if i can update or not it gave me this result :
Latest available software for Nokia N95, product code 0548021
Version: 11.0.026
Compare numbers
If your current version is dated earlier,then update now to get the latest features,applications and improvements
My N95 is 11.0.026
so this mean that i can Update or not ?
Thanks all

Latest firmware

Similar Messages

Maybe you are looking for