Latest Fx version won't download, getting error message. "pSVzV7gx.exe.part source file cannot be read.
I have attempted to download the latest version of Fx. I get the message "pSVzV7gx.exe.part can't be downloaded because the source file could not be read".
Hey,
Thanks for your response. I've checked in the about itunes and it says the MacBook's itunes details are as follows
11.05.5 (5)
64 bit
copyright 2000-2013
I imagine the iMac has the lates itunes on it although I cannot check because it brings up the error message as described above. Any help will be appreciated.
AJ
Similar Messages
-
i have unistalled and reinstalled iTunes without success. itunes was working great the day before this occurred.
thanksAnyone can help to advice how to solve this issue ?
-
I am running windows xp. Trying to download latest version of iTunes and get error message: Microsoft Visual C Rundtime Library. Runtime Error. Program:C\ProgramFiles\iTunes\iTunes.exe. R6034 An appliction has made an attempt to load the C runtime library incorrectly. Please contact the appliction's support team for more information.
2nd/ message: iTunes was not installed correctly. Please reinstall iTunes. Error 7(Windows error 1114)
I have removed iTunes serveral time and tried to reinstall many times and get the same results noted above.
Can anyone help me? Thank you. EFS1Hello DrJMDDC,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/ht1923
1. Remove iTunes and related components from the Control Panel
2. Verify iTunes and related components are completely uninstalled
3. Reinstall iTunes and related components
Best of luck,
Mario -
When downloading Iphone software update (version 4.0), I get error message
When downloading Iphone software update (version 4.0), I get error message (stopped err = -3259). Is there a solution for this???
Did anyone solve this?
I'm still having this issue. I also had the same issue when trying to download a large update for an app (43MB). I can download and install smaller udpates but I can't even download the large updates. I've checked all of my firewall settings and they are fine. I've turned off the firewall when trying to download the update and it still does not work. It just keeps saying that my network connection timed out.
I'm not at the stage where I can't install new apps because it requires the latest OS version on my iphone which I can't get! -
Have not used Itunes in a while and I cant access Itunes Store with out downloaded new version but I keep getting error message with download. Can I just access the Istore without downloading new version?
downloaded new version but I keep getting error message with download.
What does the error message say, andrea? (Precise text, please.) -
Error message -48: The itunes library file cannot be saved.
Hello,
When I open up my itunes i get an error message 48 - the itunes library file cannot be saved. All my data is there - music, podcasts etc. Just wondering if this error message means anything, if so what, and what I can do to fix it?
Thanks!I just called Apple Support and I think they helped me, but I'm still waiting to see if the error message returns. I was experiencing the same problem. Whenever I started iTunes, I would get the -48 error message. Everything else was working fine. Apple Support instructed me to delete some files from a folder and restart my pc. I did this and it seems to have worked. The folder is on my C:/ drive. Using Windows Explorer, I went to my C:/ drive and then opened the following folders in this order: "Documents and Settings", "Administrator", "Application Data", "Apple Computer", "iTunes", "iPod Software Updates". Inside the iPod Software Updates folder, I found four files which I deleted. I then emptied my trash can and restarted my pc. After I restarted my pc and opened iTunes, the error message did not come up. So it looks like my problem has been solved. Just some minor glitch having to do with the last update. I should mention that I did just get an iPod Classic 80 gig which replaced my 30 gig iPod Photo which just died.
-
I can't open my Itunes keep receiving error message- The iTunes Library.itl file cannot be found or created. The default location for this file is in the "i Tunes" folder in the "Music" folder. I have even tried removing and reinstalling iTunes and it still does work because I continue to receive this error message. Please Help!
Anyone can help to advice how to solve this issue ?
-
My iCloud email won't open Get error message" MFmessage error domain 1032
my Icloud email won't open. Getting error message MFmessage error domain 1032. How do I correct it?
Hello ggquilts,
Thank you for the details of the issue you are experiencing with your iCloud email account on your Mac.
I recommend following the steps in the article below for the issue you described:
iCloud: Troubleshooting iCloud Mail
http://support.apple.com/kb/TS4002
Thank you for using Apple Support Communities.
Best,
Sheila M. -
I tunes wont download getting error message 800736B3
i cant install itunes i keep getting error message 800736B3 what can i do to resolve this problem please
i cant install itunes i keep getting error message 800736B3 what can i do to resolve this problem please
-
I believe I had some kind of virus attack. I got everything cleaned up. (I HOPE) In the process of cleaning the virus, I unintalled Firefox because it wouldn't open. Kept getting the error message that Firefox was already open and I had to close out of the sessions or restart the computer. After restarting the computer several times and not being able to find any open sessions in task manager, I uninstalled. When trying to reinstall, I get the error message "can not find archive file." I've tried downloading Firefox from cnet as well as the Mozilla site to no avail. Please help. I'm getting tired of using Chrome already!
Hello,
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!
Thank you. -
Trying to set up contacts on Windows7 PC. Get error message that "setup cannot start because iCloud server has stopped responding. How can I fix this?
Looks like itunes was still trying to communicate with my iphone and got confused when it couldnt find it. Found this in another post and it worked great.
Solution:
Make sure you are not connected to the internet and then open itunes. Sync your phone and then enable the internet again. Then stay connected to the internet and close your itunes and reopen it. Bam problem solved.
By WaKaDo -
Updated itunes and getting errors messages: iTunes.exe-Entry Point Not Found
After updating itunes, I get the message iTunes.exe-Entry Point Not Found. The procedure entry point AVCFPlayerEnableHardwareAcceleratedVideoDecoderKey could not be located in the dynamic library AVFoundationCF.dll.
Then another error message tells me: iTunes not installed correctly. Please reinstall. Error 7 (Windows error 127). I've tried to repair which looks successful until I try the desktop shortcut as well as going into the exe file in program files. Still the same message. Operating a windows XP service pack 3 with 32 bit. Help would be most appreciated.--No problems with itunes until this recent update.iTunes.exe-Entry Point Not Found. The procedure entry point AVCFPlayerEnableHardwareAcceleratedVideoDecoderKey could not be located in the dynamic library AVFoundationCF.dll.
Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever -
Help!!
Hello Whit1erj,
It sounds like you are not able to access your iTunes library. With the error message you are receiving, you will want to first locate the iTunes Library.itl file. These are the default locations for this file on a Windows computer, but if you dont find them here, you may need to search for the file:
Windows XP: C:\Documents and Settings\username\My Documents\My Music\iTunes\
Windows Vista: C:\Users\username\Music\iTunes\
Windows 7: C:\Users\username\My Music\iTunes\
Windows 8: C:\Users\username\My Music\iTunes\
You can find the full article about iTunes file locations here:
Where are my iTunes files located?
http://support.apple.com/kb/ht1391
Once you locate the iTunes Library.itl file, you can make iTunes point to it using these steps:
Steps to create or choose a different iTunes Library file
If iTunes is running, quit iTunes.
If you are using Windows, hold down the Shift key and from the Start menu and choose All Programs > iTunes > iTunes.
You should see one of the following screens:
Then you can select Choose Library and navigate to the location of the iTunes Library.itl file. You can find the full article here:
iTunes: How to open an alternate iTunes Library file or create a new one
http://support.apple.com/kb/ht1589
Thank you for posting in the Apple Support Communities.
Best,
Sheila M. -
Hi! Need help desperately! I downloaded Reader 9.1 and it won't install. Get the error message "Error 1606. Could not access network location %APPDATA%\. Thanks!
Hello again:
I don't mean to step on any toes here but it seems that the root of the problem is being ignored. I offered before that the problems you are experiencing are due to inconsistencies in the Windows registry. While I could speculate on the various methods of how this came to be, I don't have that kind of time nor is there a need. More than likely it is some type of malware that has infected the system but that should be explored on more suited forums such as MajorGeeks.com or BleepingComputer.com. The way I see it, you have a few paths you can take, all of which will lead you to the same place: no more error 1606 and a functional Reader:
Option 1: Run the Windows Live OneCare free safety scanner to resolve any broken registry links it can find.
Option 2: Manually fix the "broken" registry entries in the Windows registry. While I understand Pat's hesitation to do so, the truth of the matter is it will resolve the immediate issue. Once the APPDATA path is corrected, you should then be able to install Reader.
Option 3: Restore Windows to a previous date using System Restore located in Help & Support of the Start menu.
Option 4: [SLEDGE HAMMER] Reinstall Windows over the top of the current installation (NO FORMAT). Use this option only if you have no other recourse. The potential to lose all personal data and settings is high if this option is not performed correctly. If this option is chosen, be certain to use a "setup" profile (username) different than your current username. If you only have a manufacturer's system restore disk rather than a Windows CD/DVD, you may not have the option NOT to format which WILL result in the loss of personal data. This option should only be performed by someone who has previous knowledge of such or is willing to learn even at the expense of data loss/time/effort.
I HIGHLY recommend that any and all personal data is backed up to an external location such as a USB key, CD/DVD, or external hard drive prior to performing option 2 or 4 above. If you would like any of the options explained in greater detail, feel free to ask and I will oblige.
Best of success!
Michael -
How do you update from 4.2.1 to iOS 4.3? I can't download any applications...
This article will tell you how to update your iPhone 3GS to the latest iOS version, 5.1.1: iOS: How to update your iPhone, iPad, or iPod touch
However, if you have an iPhone 3G, then you cannot update past 4.2.1.
Maybe you are looking for
-
Ipod 1st generation (1 G) no longer recoginzed by firewire
I just upgraded from OSX 10.3.9 Panther to OSX 10.4.4 Tiger. Now, as I have read in many places, my iPod is not recognized when I plug it into my TiBook. It used to work. It still charges. It still plays. But my songs don't syncronize with iTunes. I
-
ITunes won't use my gift card balance to purchase apps.
I have a $12 balance from a $15 gift card and twice I've tried to buy an app & it won't deduct from the gift card balance. What do I need to do? Is it just certain apps (Wipeout & Plants vs Zombies)?
-
Unable to run Servlet program using J2EE SDK
Hello, i am a newbie to all this j2ee stuff and servlets even.so the problem that i have maybe a very common one and i hope that most of you may have a fix to it... i use J2EE SDK to compile and run Servlet programs.I have a Servlet program with the
-
Hi Friends, i have created a keyfigure with date as a data type. When i am trying to load the data from ODS to Infocube, i am encountering a problem in the update rules. No update option is getting selected automatically and the 'addition' option is
-
I have been trying to resolve the error shown below which occurs when starting the J2EE server. The J2EE version is the latest - J2EE SDK 1.3.1. I know this is a long post, but I wanted to be clear about the problem - The following error occurs when