Latest Gen Mac Mini and Editing?

I have always loved the idea of a Mac Mini as a supplementary editing machine to my Ma Pro.
I’m looking at a 320G, 2.26GHz Dual Core Mini with 4GBs of Ram and an external HDD.
Avid Media Composer requires a nVidia Graphics Card no smaller than an FX560 and the new Mini has a NVIDIA GeForce 9400M. I really want to use it to digitise/capture hours + hours of “talking heads” some DV some HDV. I can use the Mac Pro for all the other stuff. But if a Mini can help me capture all the footage I have then I can double my output very cost effectively. I would only use the Mini to run Snow Leopard an Avid MC or FCP 6.
Any advice? BTW – Has anyone tried FC Suite 2 on a Mini or at least FCP 6??

Yes, you are right to be concerned. Hopefully someone with that exact monitor will respond to your post.
The Mac mini has an issue driving displays with non-coherent TMDS receivers in them above a certain frequency. In the following link, see the "Graphics and Video Support" section.
http://support.apple.com/specs/macmini/Macmini_Early2006.html
It's a roll of the dice whether the BenQ has a coherent TMDS receiver or not. If not, likely it will suffer the same fate as your friend's monitor. You can usually fix things with third-party software (SwitchRes X), but that's a bit of a pain.

Similar Messages

I have a first edition mac mini and internal speaker are not enabled yet.. what can I do?

I have a first edition mac mini and internal speaker are not enabled yet.. what can I do?

If you are using an HDMI connection, go to Apple / System Preferences / Sound and see if you can select the Built-In Speakers?
If you have headphones, buds or something plugged into the Audio Output jack, unplug it.
If not then perhaps the micro switch inside the Audio Output jack is stuck? In that case, try plugging and unplugging some headphones, buds or something in and out a few times to see if it will un-stick.
If it will not un-stick, then you will need to make an appointment for service.
see > Apple - Support - iMac - Service FAQ

Mac Mini and thunderbolt/vga to LCD TV

Hi All,
Here is an interesting one......
I have just taken delivery of 5 new Mac Minis which have the thunderbolt port on them. The Mac Minis each connect using displayport tb/vga adapter to a switch then on to 5 LCD TVs.
The HDMI/DVI is not used.
In this config, if I start a Mac Mini the display will not route through the Thunderbolt/vga adapter to any of the TVs (even though I have selected them on the switch). The display seems to want to go through the default HDMI port.
If I connect a standard PC monitor to the tb/vga adapter and reboot, the screen shows correctly on the monitor. If I then change cables without a reboot, the LCD TVs show correctly!
I can add the PC monitor as a second monitor using HDMI/DVI and ensure that the outputs are mirrored AND that the VGA display is the primary. However, on reboot it's as if the details are all forgotten!
Searching around it seems that there are issues with Mac Minis and VGA connections to LCD TVs. That said, I wanted to put my environment out there and see if anyone had an ideas.
Interestingly enough, with older Mac Minis (without the tb/vga) it works perfectly well, indicating a problem with the new Mac Minis.
Thanks for ANY ideas!!!!

Hey Spost!
You have explained exactly what happened to me last night. I was afraid it was part of the 10.8.3 update or the latest ATV software update that hit this week. I tried from my macbook pro and the airplay from 10.8.3 and the atv software worked fine.
Previously my mac mini was connected to a monitor in my basement but last night i made it "headless" and moved it to my "server closet" airplaying prior to the move worked great ... then last night 4:3 Green Screen.
My guess is the computer needs to be connected to a external display in order for airplay resolution to figure itself out. Via Logmein i could see that the Mirror mode wanted to use the resolution that fit the mac and not what was best for the Apple TV ... Even forcing the change made the setting go right back to this mac.
Looks to be a bug in a plist file that apple would need to fix as many people run headless mac mini's and now wish to AirPlay to their Apple TV's without the need for a external cable run.

I have a Mac Mini and I can't get it to work with my Ricoh Aficio MP 161. Any ideas?

I have a Mac Mini and I can't get it to work with my Ricoh Aficio MP 161. Any ideas?

The latest Apple driver support begins with the MP 171.
Here is Ricoh's official driver download page specifically for the Afico MP 161. Note that new drivers for this device were released on Aug 2, and include Lion and Mountain Lion.
Hopefully, this will solve your device issues.

My wife and i both have an itunes library installed on to our separate pc's, we are now de-commissioning the pc's and are moving over to a single mac mini, can we install both libraries on to the mac mini and run them as separate libraries?

my wife and i both have an itunes library installed on to our separate pc's, we are now de-commissioning the pc's and are moving over to a single mac mini, can we install both libraries on to the mac mini and run them as separate libraries?

graham218 wrote:
are moving over to a single mac mini, can we install both libraries on to the mac mini and run them as separate libraries?
Generally YES.
It's possible to hold separate iTunes library's on a single machine.
Generate two new folders inside the Music folder of the Mini and name them differently; e.g. man and woman.
Copy your whole library into "man" and your wifes into "woman"
Go to sharing in the system settings of the Mini and share the Music folder in your network.
After copying the whole library's to the Mini you may point iTunes to the new location at startup by holding the option key (alt) at the keyboard.
iTunes will then ask you where the library is located.
Point it to the matching library on the Mini.
That's all.
Lupunus
PS ... If you both use only the Mini you have to setup a user account for each and just copy the whole library to the Music folder in particular.
Message was edited by: lupunus

Mid-2007 Mac mini and HDMI issues

I have a Mid-2007 Mac Mini with OS X 10.7.3, that, most of the time, will work fine with a DVI->HDMI cable and either of 2 HDMI ports on the TV. The Mini recognizes the display correctly (a Vizio E371VL). The display's native res. is 1080p at 60hz, and the Mini is set to that and looks great. I can switch to lower resolutions and even restart the mini and have the Vizio look and behave correctly.
However, I have an Apple TV (current generation - black brick) hooked up to the other HDMI port on the Vizio. It also looks and acts great.
The problem is when I switch between the inputs on the TV. If I go to the Apple TV (which will be working fine) and then back to the other HDMI input, the Mac mini shows black. The TV does not say "no signal" or indicate any problem. No amount of zapping PRAM, ressetting the SMC or basic restarting helps. In fact, the TV still registers a signal at 1080p. Using Apple Remote Desktop from another Mac (a 2006 Macbook Pro with DVI) shows the Mini is still functioning and still correctly displays the Vizio model and 1080p @ 60hz resolution.
The kicker here is that I can physically disconnect the DVI/HDMI cable from the Mac mini and connect it to the Macbook Pro. The video from the Macbook will pop up immediately. I can switch between the Macbook and Apple TV all day long, switch resolutions, etc. No problem.
Even more bizarre is that this has the effect of "resetting" the Mac mini. If I plug the DVI connector back into the Mini, its video will pop back up. It will work fine as above until the HDMI input is changed again.
Vizio tech support acted as if they'd never heard of Apple, Inc. Useless.
Super frustrating problem.

Opperman,
I went with my gut and got an LG 47LM4600 TV with VGA input in addition to HDMI (seems there are not many--if any--TVs sold with DVI inputs anymore). The 2007 Mac mini is plugged in using my old DVI cable with VGA adaptor. I tested it using the DVI cable with HDMI adaptor, and there was no sound.
I can confirm the same condition that you originally described when I try to switch to the Mac mini on the PC input. The screen is black except for a color bar that flashes on briefly every 2-3 seconds at the bottom of the screen. No amount of switching from one input to the other will make the display come back. The only way I've found to fix it is to unplug the cable from either the TV or the computer and plug it back in.
The annoyance with this is ameliorated by the fact that we'll be using a new Apple TV to watch Netflix from now on, instead of using a Web browser on the mini. Will only have to worry about it when watching DVDs.
Cheers.
Message was edited by: Numenorean

Mac Mini and USB 2.0 hubs (hubs stop working within a month)

I have an aluminum Mini running OSX 10.6.6 (Snow Leopard). With only 4 USB ports, I have need of a USB hub to accommodate my external drives and other peripherals: keyboard/mouse, camera and iPhone have to use the existing ports in the Mini (difficult access to ports due to space limitations), leaving one port for up to 4 external drives (older drives 40-60gb used for backup and extra storage).
I have problems using powered USB 2.0 hubs with this computer; I have 'burned out' 2 hubs since buying the Mini in February. They just flat out stop working, though they still show power (the power indicator light on the hubs); no peripheral is recognized when plugged into the hub (which worked fine for about a month). I can unplug the 'must use Mini ports' (camera, iPhone, charger, etc) and the peripheral drives are recognized and work normally when plugged directly into the Mini ports.
One hub was a Belkin 4-port hub (about 1 year old) and the other was a GE 3-port hub with several flash card readers (19-in-1 card reader), also about a year old. Is there any reasonable explanation why powered hubs would suddenly stop working, related to use with the Mac Mini 2010 aluminum version?
I had worse problems with the USB ports in an old (~2006) Mac Mini (out of warranty), where the USB ports in the Mini stopped working, which is partly why I bought the new mini. In light of this tidbit, (be honest, please) are there known issues with Mac Minis and USB?

Each of the external drives has its own power supply; I generally only use one drive at any one time, but on rare occasions I have powered up more than one to confirm or transfer files. I don't leave any of those drives on when not in use, and when everything is working I properly eject/unmount them before turning them off.
There have been times when I powered up a drive connected to a powered hub and both the hub and the drive indicated activity but the drive didn't mount. On those occasions the drives sometimes would not appear in Disk Utility, and other times would appear, but would not be "mountable". I didn't know what the best way to deal with that was, so I would just turn the drive off, hoping the lack of mounting on the desktop meant no real drive activity was occurring and I wouldn't risk data loss or drive damage. So far all the drives seem to work fine when plugged directly into the back of the mini.
The main external hard drive I was using when the Belkin hub failed (iomega 40g) is USB 2.0 only (no firewire). I have another drive that is only firewire (la cie 60g)... so it wasn't a factor. Two other external drives are ACOM, one 40g one 120g, and then there's my old iMac G5 disk (display fizzled and everything but the disk recycled through Apple's recycling program) which is mounted in an external enclosure and is part of the USB contingent, but is not being used for anything but backup (all three both USB 2 and FW400 capable). (I know, too many toys... but why throw them out?)
The USB hubs both had their own power supplies, too, and I never used them without power (though I tried it as part of troubleshooting, before reading the Apple article on USB and power requirements). Other USB devices that only work when plugged into the mac directly are my Epson Stylus CX4800 all-in-one, and my Radio Shark.
So, whaddya think? Should I risk buying another powered USB hub or just live with plugging in peripherals to one available USB port (through a short USB 2.0 extension) and only use one at a time? That would be a bit of a pain, but if there are no issues you've heard of with Mac USB ports (several unanswered questions in the Mini Support forums here involving USB and peripherals, I noticed), what else would explain the seemingly short lives of USB hubs?
Oh, here's something I just remembered: the last time the Belkin hub was working (last night), I had my Radtech BT mouse charger cable plugged in (not charging, mouse not attached) along with two of the external hard drives, and my Fuji camera USB cable. I got an error message onscreen (on the Mini) that a drive had been improperly ejected (or put away?), yet the hard drive in question was still mounted on the desktop. I looked at the hub, and the loose ends of the charger and the camera USB cable were touching. Could that have caused the error (and maybe the hub to fail)? (Edit: the camera cable I think was plugged into the mini's one available port; 3 external drives and the mouse charger were plugged into the hub, _but only one drive powered up and in use (3rd edit)_. The camera end of its USB cable contacted the mini-plug end of the mouse charger... could that have short-circuited the hub? +That wouldn't explain the failure of the GE hub a couple weeks before... but I don't know if any of this is connected, so to speak--2nd edit.+)
Message was edited by: blick
Message was edited by: blick
Message was edited by: blick

Graphite base station not working with my Intel Based Mac Mini and iPhone.

My Airport Express died after 2 years of use. I had to resort to plugging in my old but still functioning Graphite Airport base station. Since the set up assisant on my Mac mini does not work with the older base station, I used my G4 400 tower to set it up. I got it working and tested the connection. On to testing my iPhone. It sees the new network. Password is entered and the wifi icon shows full signal strength, but does not connect to the web. Next I try my Mac mini out on the new network and it too sees the network, but does not connect to the web. I double check the older G4 and the connection is still strong and fast. I shut the G4 down thinking that maybe the Graphite can only support one computer at a time, and the Mac mini and iPhone still can't connect to the web. I'm not sure what to do with this one. Is there a setting that I need to use? As far as security goes, the Graphite base station was set up with a WEP password. Any help would be great
Message was edited by: Soriano

I suggest using AirPort Admin Utility (version 4.2) to check the base station settings and change them, if necessary. (AirPort Admin Utility should be able to configure a Graphite base station from a computer running Mac OS X 10.4, even though AirPort Setup Assistant can't.)
In the Network pane of AirPort Admin Utility, please make sure that "Distribute IP addresses" and "Share a single IP address (using DHCP and NAT)" are checked, and that everything else is unchecked. I am assuming that the Graphite is the only router in your local network and that there are no computers connected via Ethernet.
The Access Control pane of AirPort Admin Utility should list either all of the relevant AirPort ID's or nothing. You can find the AirPort ID of an OS X computer by looking at System Preferences>Network>Show:AirPort>AirPort.
The Internet pane of AirPort Admin Utility should be set in accordance with your Internet provider's requirements. Most likely, it should be set to Connect Using:Ethernet and Configure:Using DHCP.
After verifying the settings, power down the computers, base station and cable or DSL modem for a few minutes, then start them up sequentially, leaving time for each to get fully up and running: first the modem, then the base station, and finally the computers.
The network preferences on the Mac Mini and the iPhone are also relevant. I assume that the preferences are unchanged from those that worked with the AirPort Express.
I hope this helps.

Bridging the gap between Mac Mini and iMac

Does anyone agree that Apple needs to add another model between the Mac Mini and the iMac? I think they need something like a Mac Mini Plus. Two models, one with the 1.83GHz Core Duo and one with the 2.0GHz Core Duo. The unit itself would be slightly larger than the standard Mini and include a PCI Express slot with several video card options and a faster (7200RPM) hard drive. Personally, I hesitate to buy an iMac because of the built in monitor. I would prefer to buy a separate LCD flat panel monitor that I could keep for years and use with different Mac models as I upgrade. As for the current Mac Mini, it's video and processor options are on the low end, albeit perfect for the casual user, but for someone that wants to do some gaming or video editing, they don't quite cut it.
Don't get me wrong here, I love the elegant design of the iMac, but I think Apple needs to offer something that allows us to have the iMac equivalent computing power without the built in monitor and without having spend a thousand more on a PowerMac.
Athlon XP 1800+ Windows XP Pro

Yes, I'd love something in the form of a Mac Mini that was closer in spec to the iMac.
Honestly, the only reason I won't buy an iMac CoreDuo is the built-in monitor.
And, the only reason I won't buy a new Mac Mini is that they are underpowered.
I have owned two iMac G5 systems, and both had serious faults with their built-in LCD panel.
The first would permanently etch in anything on the screen for every hour of intensive use.
It wouldn't etch it in in normal use. But, if I did any of my audio work, it would heat up the system so hot that the image on the screen would literally cook into the LCD panels plastic surface.
It literally looked like you took a razor blade, and precisely carved the exact image into the surface of the screen. Pretty nasty looking. Nothing would get rid of it, and it would happen every time I did my audio editing / processing work for an hour.
Naturally, the more work I did, the worse it got. I only got two editing sessions out of an LCD panel before having it replaced.
After going through that for a while, I sold the system after having a fresh panel installed under warranty.
I got tired of damaging the screen after every hour of work.
The second iMac G5 was purchased a year later. That one also suffered permanent damage to it's LCD panel. But, not quite as noticeable.
I know that there are a bunch of people getting ready to hit me with the "Image Persistence" explanation. But, trust me, I know about Image Persistence, and this wasn't it.
I was seeing actual permanent screen burn-in (which is not supposed to happen on LCD panels).
The service tech was absolutely amazed at the appearance of my screen. And, yes we verified it was the actual panel that was damaged. He wouldn't replace it without verifying that it was the panel itself.
Anyway, I called to arrange service on the second system again, and before I could get it in there, the backlight started flickering. And, I had already had tons of other stuff fixed on the machine. So, I sold it and bailed-out.
Now, after all the problems I've had with the built-in screens on the iMac G5 systems, I don't want another Apple product with a built-in screen. I want to use my own LCD panel.
I have an LCD panel that I'm using now. It's about 3 years old, and only cost me $200. And, it doesn't have even the slightest indication of image burn-in or image persistence. I use it every day, and use it just like I did the iMacs.
So, what I want now, is a machine comparable to the iMac CoreDuo, but without the built-in screen.
The current Mac Mini's cost way too much for their very low specifications.
I already have a Mac Mini G4. It's underpowered as well. But, no worse-off than the current Mac Minis.
Now, if Apple produced a Mac Mini with identical specs to the iMac, I'd gladly buy it.
Even better for them, I'd pay the same price as the current iMac to get it without the built-in monitor.
Yes, that's right, I'd pay the full price of the iMac to get a Mac Mini without a monitor if it was of the same specifications otherwise.
The current Mac Mini is obviously stripped-down to prevent competition with the iMac. But, I think they'd find that they would simply expand their user base if they offered a better Mini.
With their product line as it is, the current Mac Mini is not a compelling machine, and the iMac is not an option because of it's built-in monitor.
Get me a high-end Mac Mini and you've got a sale.

MAC mini and Photoshop CS6

Dear all,
I want to swich to MAC from my current Windows PC.
I'm thinking about to use a MAC mini because I have a good external display, so the iMAC is not necessary.
But I would like to know if the MAC mini is powerful for using Photoshop CS6 (image editing, no 3D).
Does someone has experience with a MAC mini and using Photoshop??
Thanks a lot in advance for your support!
Alecs

The mini uses Intel's integrated graphics rather than a discrete GPU which puts it at a small disadvantage compared to the iMacs. I'm not a graphics professional but I use Photoshop extensively in my work and use it on my MBA (which is a bit slower than today's minis and also uses Intel's integrated graphics) as much as my much faster iMac. Since loading and saving large PS files can be time consuming you might want to consider the Fusion model to get the benefit of SSD speeds.

2nd Gen Mac Mini, iTunes Streaming issues

Feeling flushed I've replaced my ATV1, 1st gen Time Capsule and Mac Mini and moved them down to the retirement home we're working on.
One of the reasons I replaced the Mac Mini was everytime I booted up I had to run diagnostics to get the airport running effeiciently . However, in the other place still using the TC as the wireless router it appeared to working much better. Then I added the old ATV1. Again for a week things were great.
Then...... while streaming music to the ATV1 and an Airport Express upstairs I noticed it started coughing and cutting out. I'd have to reconnect the speakers (ATV1 in the same room & AE upstairs) and restart the track. After experimenting what seems to be happening is:
When playing iTunes to the ATV1 and AE Speakers if I trying and download something large it cuts out, and if open Airport Utility or iStumbler (checking the power on each device for wireless power) it coughs badly recovering intermitantly. I can internet to my hearts content without any problems and up load massive documents to iDisk without interupting the music????
Apart from the AE ('n') they are all 'g' devices. iStumbler is showing relatively low signal strength for TC (41% ish about 20 feet away) and the AE (19% immediately upstairs above the Mini). As we're on the beach the only two other neighbours signals are showing and are really weak.... so the 'noise' is almost nothing.
In a wireless network siutation does the Mini talk directly to the speakers or does it have to go through the TC?? Is the Mini card dying or is it the TC? Caould I use another AE ('n') plugged into the Mini as the wirelss card?
Or is it the ATV1 dragging the signal down?
sigh... it was all going so well......

Thanks that's really helpful.
Sorry; aren't the old Mini, TC and ATV1 all g and the new AX n? Same principle though. I thought the AX was allegedly b/g/n compatible?
Should have know the AX might be the prob. I had an issue with one here. It was too near the ATV1 and was interfering with its visibility. When I seperated them further (distance) the both became visible and signals improved. The trouble is because of the house construction I need a boost upstairs. The AX works great for internet extension.
Did I read somewhere someone reset an AX for g only?
Cheers.

Mac min and i movie

When i launch i movie it says my mac mini does not contain an quartz extreme compatible graphics card & quartz extreme is not working in i movie. Any suggestions of the source of the problem and how to fix would be appeciated..thanks..

Its nice that this problem was solved, but it would be even nicer if we knew what solved it.
I am looking at either a Mac Mini (2g/2g) or the iMac 2.4g/24", and have been perusing the Mini forums for info on how well the Mini runs iMovie, or even FCE. I have used FCP 3.0 for years on my G4 / 900 m, but don't need the power of FCP (or the hefty upgrade price).
I took a look at iMovie 06 an iDVD 06, and find they will pretty much suit my current needs. I am mostly just moving (and editing) old VHS home video to DVD. However, iMovie bogged down quite a bit on my tired old G4 after some extensive editing that required lots of sound track work. While this isn't normal in the simple VHS-DV conversion process, I figure I might as well get a newer, faster, system to allow for it.
Many comments on the Mini address "great for everything but 3D graphics gaming" This is perfectly fine, but I noted a warning about "quartz extreme" regarding FCE, so am interested in the same problem with iMovie.
The real question I am asking, tho, is whether iMovie or FCE editing is as the upper edge of chanllenge for the Mac Mini, and I should go for the iMac, or is the editing just a middle-of-the-road challenge for the Mac Mini.
I am intrigued with saving hte $1000 on the iMac by reusing my Monitor, Keyboard and Mouse, bu tnot at the risk of finding that the Mac Mini only "almost" does the job.
Thanks

Hello I have 2.3 i7 Mac mini and I want to change to 4th generation can I change it??

Hello I have 2.3 i7 3rd generation Mac mini and it very slow now so Can I change to new 4th generation?? What about ram can I upgrade to 32 GB?? And other thing I want to upgrade everything can I??

The late 2012 Mac mini was/is a preview of the direction Apple is moving with all of their computers including:
elimination of an internal optical drive
the only user replaceable/upgradable internal part is RAM
any and all other expansions are external devices attached via Thunderbolt, Firewire (dropped in the new Mac Pro), or USB
If you want to upgrade you have to buy a newer, more powerful Mac. At the moment that means you cannot "change to the 4th generation" Mac mini because you already have the latest generation. If you want to keep the monitor you are using with your mini I think the new Mac Pro is VERY attractive and the performance should be stunning.
Before you ask, only Tim Cook (Apple CEO) knows for sure when there will be a new Mac mini release, and true to Apple tradition, he isn't talking. Not only that the rules of these Discussions forbid speculation on future releases.

How can I share my LR catalog between Mac Mini and MacBook Pro?

How can I share my LR Catalog between my Mac Mini and MacBook Pro?

Your Lightroom license key is
a. Single user / owner
b. You are allowed two active installations, with one in use at any point in time.
c. It is cross platform Mac and or PC.
d. You can install / uninstall as many times it is necessary, as long as you meet the criteria above.
The latest updates can be accessed from the link below.
Product updates

Mac Mini and DVI to ADC adapter

I have an old Apple Cinema Display with an ADC port. I have the DVI to ADC adapter, which I have been using to connect to an old Power Mac which is on its last legs. I want to replace the Power Mac with a mac mini and connect it to the display from the HDMI-DVI cable (included) to the DVI-ADC adapter, and then connect on to the Display. The Apple sales representative (after laughing for a while, which I thought was fairly insensitive) said that I won't have audio with this setup, and I will have to get a whole new display. Is this true?

when you say "Mac flat screen LCD", do you mean this:
http://www.ares-woo.com/christmas2005/images/pc_cine.jpg
if it is, you might wanna try this:
http://store.apple.com/us/product/MB570Z/A?mco=MTY3ODQ5OTY

Latest Gen Mac Mini and Editing?

Similar Messages

Maybe you are looking for