Latest ios(12.2(5X), (15.x) MAB issue
i will use a switching module in 3945 router instead of 2960 switch
existing ios version(old-switch) is 12.2(44)SE6
new ios version(new-sm module) is 12.2(55)SE7
existing ios version mab do work fine, but new ios version mab don't work
--- existing configuration ---
aaa new-model
aaa authentication
login default local
aaa authentication dot1x default group radius
aaa authorization network default group radius
aaa session-id common
dot1x system-auth-control
interface xx
switchport access vlan 10
switchport mode access
dot1x mac-auth-bypass
dot1x pae authenticator
dot1x port-control auto
dot1x violation-mode protect
spanning-tree portfast
--- new configuration ---
aaa new-model
aaa authentication login default local
aaa authentication dot1x default group radius
aaa authorization network default group radius
aaa session-id common
dot1x system-auth-control
interface xx
authentication port-control auto
mab
dot1x pae authenticator
as ios version upgrade, some of the configuration has been changed and
mac authentication bypass is not working, so please tell me why these
problem occur
I have to mention one more thing. If I connect to the console, I do not get any prompt or see any banner etc. However I will see all the log messages coming up on the screen.
I can ssh / telnet to the switch no problem.
Similar Messages
-
I have synced my ipad with my computer then downloaded latest ios version. How do I resync my data back to my ipad?
You Restore from iTune Backup.The syncing is towards the end of the Restore.
1. Settings>General>Reset>Erase all content and settings
2. You'll be asked twice to confirm
3. You'll see Apple logo and progress bar
4. You'll see a big iPad logo on screen
5. Configuration start
6. Set language
7. Set country
8. Select Network and input Password>Join
9. Enable Location Service>Next
10. You'll be given 3 options (a) Setup as New iPad (b) Restore from iCloud Backup (c) Restore from iTune Backup
11. Select Restore from iTune Backup
12. You will see picture of USB cable pointing towards iPad
13. Connect iPad to iTune (make sure iTune is on standby)
14. Tap Continue (computer)
15. Restore iPad from Backup (computer)
16. See progress bar with estimated time (computer)
17. See Restore in Progress on iPad
18. See Apple logo
19. See Apple and Progress Bar
20. Slide to Unlock
21. Copying Apps back to iPad (computer)
22. You'll see Loading/Installing/Waiting below the Apps (iPad)
23. Sync Music/Podcast/Movies to iPad (computer)
24. Sync completed (computer) -
I have a windows 8 computer and have recently updated my ipod to the latest ios and it has wiped my Ipod clean except for my photos. whilst trying to get my music back using different sources like CD's and stuff i cant seem to get any album art to load on my Ipod? I can go on itunes and highlight single/multiple items and change the artwork and my computer will confirm it but when I look on my Ipod it doesnt display any art work or allow me to change the artwork that is already there? i need help please!
Album artwork can be added/changed on songs via the iTunes Get Info menu item from the File menu. Note that music that you loaded from CDs will not have any artwork. If you want to aquire artwork you can try the File menu item Library > Get Artwork or you can download artwork from the internet, etc. Note that just changing artwork on your computer won't affect the iPod until you sync.
If the artwork is correct on your computer iTunes then delete all the music on your iPod by syncing with iTunes with no music selected. Then reload the music onto your iPod by again syncing with iTunes with all the music you want selected. -
hi... can someone please help me.. i want to download the latest ios, but do not have the software update option in the general settings....
Connect it to iTunes on a computer and update it from there.
(73609) -
I have iPhone 4s, and using latest iOS. When I try to open any link from Twitter or Facebook, it goes to open some wrong webpage. My iphone seems to be infected or suffering from some spyware or malware. How can I remove this wrong link opening ? Please help me to resolve...
I think the McAfee suite will do the trick when I pay them a one-time fee of $69 or $179 for a year for unlimited support.
Your call of course but IMO a waste of money. Please read this first:
There are many forms of ‘Malware’ that can affect a computer system, of which ‘a virus’ is but one type, ‘trojans’ another. Using the strict definition of a computer virus, no viruses that can attack OS X have so far been detected 'in the wild', i.e. in anything other than laboratory conditions. The same is not true of other forms of malware, such as Trojans. Whilst it is a fairly safe bet that your Mac has NOT been infected by a virus, it may have another security-related problem, but more likely a technical problem unrelated to any malware threat.
You may find this User Tip on Viruses, Trojan Detection and Removal, as well as general Internet Security and Privacy, useful:
https://discussions.apple.com/docs/DOC-2435
The User Tip (which you are welcome to print out and retain for future reference) seeks to offer guidance on the main security threats and how to avoid them.
More useful information can also be found here:
http://www.reedcorner.net/mmg/ -
Since the latest IOS update, my new iPad Air is freezing and glitching badly. Typing is delayed.
Since the latest IOS update, my new iPad Air is freezing and glitching badly. Typing is delayed.
iPad running slow? How to speed up a slow iPad
http://appletoolbox.com/2012/07/ipad-running-slow-how-to-speed-up-a-slow-ipad/
If You Think iOS 7 Feels Slow Here’s How to Speed It Up
http://osxdaily.com/2013/09/23/ios-7-slow-speed-it-up/
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Cheers, Tom -
TS1398 wi-fi issues since latest iOs update
Since I updated my iPhone 5 to the latest iOS version 6.1.4 (10B350), I have experienced several ongoing issues with Wi-Fi connectivity.
Is anyone else experiencing issues?
For example,
I can no longer get a stable wireless connection from my bedroom or bathroom in my flat, whereas I previously had full strength and access to the internet. I have checked with my ISP and there are no issues with broadband in my (small!) flat and my wireless router is working perfectly.
The wireless connection drops occasionally, both in my flat when I am connected and also when I am out and about.
This change immediately happened once I updated my iOS to the new version 6.1.4 (10B350).
Any thoughts?Restore iPhone with iTunes on computer, Restore is different than Update. If the problem persists after the Restore, make Genius reservation or set up service and take or send iPhone to Apple for resolution under Warranty.
-
Since latest ios update, my iphone 6 loses my ringtones. I download new and that's gone the next day too. How can I get my phone to keep my ringtones?
Most USB port do not supply enough current to charge the iPad.
-
I have an iPhone 4 (IOS 4.3.1) and it was synced and backed up today.
I wanted to upgrade to the latest ios on iTunes (today's date is 3rd Jan 2013), it seemed to download ok (it took about 30 minutes or so), but when it tried to update onto the iPhone (I think this was what it was doing!) I got an error message that had code 3014 in it. Nowhere on Apple's website can I find a way to resolve this error code.
I then thought I would just try again from the beginning, but I then got an error message saying that if I continued I would lose all the contents on my iPhone so I cancelled it as I don't want to lose everything on my phone.
Can anyone help me as I am not very good at technical things and I really want to upgrade the ios on my iPhone without losing all the data I have on there already. An idiots guide would be great.
Thanks.Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
Update to the latest version of iTunes.
Verify the computer's date and time are accurate.
Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
Test restoring while connected to a known-good network. -
Hello - I am trying to update my Iphone 4 from its current Ios (4.3.3) to the latest Ios (7.x.x?). I currently do not sync using icloud, and have only started syncing to my itunes today.
So far, I have backed up my Iphone using Itunes, transferred all my purchases using Itunes, and imported all my photos using Iphoto.
Then clicked on my Iphone in the left hand Column and in the screen that appeared found the "Update" button. Next to the update button read "A newer version of the iPhone software is available (version7.0). To update your iPhone with the latest software, click Update."
I then clicked the "Update" button and a pop-up message reading "This version of iTunes (10.6.3) is the current version." appeared.
Please advise why this happened, and how I should go about restoring and updating this Iphone.
After updating to the latest IOS, my next step will be to sign up for iCloud.
Thanks clever mac folk!Hello hsielglad,
Thank you for your question. iTunes 11.1 is required to update to and sync with iOS 7. If you are still running iTunes 10.6.3, I recommend trying to obtain the update by going to the iTunes menu and selecting Check for Updates.
iTunes: How to install the latest version
http://support.apple.com/kb/HT5654
If you continue to get the message that iTunes is up to date, you can download the latest version of iTunes here:
Download iTunes
http://www.apple.com/itunes/download/
Once the file downloads, double click on the installation file that downloaded to initiate the installation.
Best,
Sheila M. -
I updated my iPod touch 4th generation from the latest iOS 4 update (i think maybe iOS 4.3.5 or something like that) to iOS 5.1.1. I updated to iOS 5.1.1 on a Windows XP Home Edition with the Service Pack 3 installed on the Windows XP (which I believe is the latest version). After updating, I unplugged my iPod from the computer. I saw that all my photos and videos were on my iPod, but there were no apps. A window popped up and told me to enter a passcode for my iPod. I entered a passcode. I then locked my iPod and entered what I thought to be the correct passcode, but my iPod remained unlocked. Desperate, I tried many passcodes with failure. After a while, my iPod became disabled for a long time. I decided to reset my iPod. After I reseted it, I chose to reset from my earlier back up. After reseting, my computer loaded on all my apps. But, when I started using my iPod, I realized all my photos, videos, music, app data (like game saves and high scores), etc. were gone! I have no idea what to do and I am very stressed about this! SOMEONE PLEASE HELP ME GET ALL MY STUFF BACK!!!!!!
Go to iTunea>Preferences>Devices and see if there is a backupright at the time you did the update. Then try restoring from that backup. If the apps are in your iTunes library, any app data will be restored to the iPod.
When restoring from an iOS 4 (or later) backup, if the device had a passcode set, iTunes will ask if you want to set a passcode (and remind you that you had protected your device with a passcode). iTunes will not ask you to set a passcode when restoring from iOS 3.x and prior backups.
Therefore, remembe the passcode that you enter this time.
It appears that if you restore from a backup, that backup is not subseqyently overwritten by the next backup. -
after installing the latest IOS 5 on my iphone 4, my phone went off and all i can see now is an apple logo.i can´t even open it.. what to do now?please help.. thanks
thanks a lot.. its ok now..
-
Hi, Everyone my Uncle gifted me a New Iphone 4 From Us which was At&t
I live in Saudi Arabia, Jeddah As iphone was not In Service So i used a Application SAM then when i connected to itunes iphones latest ios version was available ios 6.1.2 i updated and installed it so now i have to Activate Iphone and itunes is telling
We're sorry, we are unable to continue with your activation at this time.
Please try again later, or contact customer care.
what to do pls help if u nwThat would be the wireless number assigned by AT&T when the purchaser of the iPhone signed up as a customer with AT&T. If neither you nor your uncle ever activated the iPhone with AT&T, click the "non customer" button.
Note that jailbreaking often renders it impossible to get an iPhone officially unlocked, so don't be surprised if it fails. If it does, then you may have to buy a new iPhone, this time one that is officially unlocked.
Regards. -
Can anyone help? I updated my iPhone 4 with latest iOS 7 and now wi fi is greyed out, Bluetooth won't work and tbh am so angry! Phone now out of warranty so apple won't help without it costing me. Don't want to pay as its an apple problem not phone problem. It worked ok before. Tried everything, even clearing it down. Can't even back it up now unless I connect to a pc!
I have not had wifi since November when I upgraded to the newest IOS version. I called the Apple help line and they told me some things to do and I tried them all and they worked for a few hours and then wifi shut off again. I kept doing what they told me and it worked for a couple more days and then I could never turn it on again. My blue tooth doesn't work either. I had to actually increase my data usage with AT&T becuase of this. When I did that in December I went to the Apple store and was told that it is a hardware issue and since my phone is out of warranty I would have to pay for a new phone because they could not fix the issue. My upgrade isn't up until June 2014 so not only do I have to wait for the upgrade and I am not paying for a new phone but I have to pay $10 plus extra a month on my cell phone bill because I was going over on my Data!!! I have been beyond upset about this and Apple is not doing anything about this nor did they offer up some way to resolve the issue because obviously it is not just some rare incident if several people are having this issue. Who knows how many people out there have had this issue and have not said anything about it. Now there is a newer update that I can't do because it requires wifi in order to download.
June can not get here fast enough and I may not go back to Iphone after dealing with this for so long with no help from Apple. -
"Photos in the Camera Roll of "(your) iPhone" cannot be imported because the device is locked with a passcode. You must unlock the device to import them." That's the new error message when I plug in my iPhone 5 running the latest iOS 7.1 into the MacBook Pro running iPhoto '11 v.9.4.3. My Mac OSX is still 10.8.5.
So, I unlock the iPhone by entering the "passcode" before I plug it into the MBP and still iPhoto does nothing. At least it doesn't issue the error message above.
I've checked both iPhoto preferences and those for Photos and Camera in the Settings on the iPhone. There doesn't seem to be anything to change this lack of connectivity.
What next please?An hour-long phone discussion with Apple Support yesterday solved this question and sorted a couple of others.
As for this one, do not ignore any messages which pop up when you plug in your iPhone and ask "Trust this computer?". The correct reply is "Yes", not "Cancel".
OK, you cancelled like I did, thinking "What on earth is this for?". Mistake. You can force the issue by having iTunes open when you next plug in your iPhone. Tell the iPhone that it can trust its old friend, your computer and voila! Your photos can download into iPhoto again.
Thank you, Jay with Apple Sydney, Australia!
Maybe you are looking for
-
Illustrator file not continusely rasterizing
I have a bitmap (2075 x 1556) I Image Traced into a vecor image in Illustrator CC and then brought that into After Effects CC, I put it in a layer and turn on the little sun icon on the layer to continusely rasterize, but when I zoom in on the layer
-
I need to know if free account holders will be able to collaborate on forms that have been shared
I need to know if free account holders will be able to collaborate on forms that have been shared with them and if there will be an Enterprise version available for Adobe Formcentral.
-
IWeb Add Comment Functionality
I have set up a blog where users can add a comment. This works fine for me using firefox on an imac, and on my laptop using xp and IE 6. However some windows users using IE 7 are having issues, whenever they click Add comment the form that pops up is
-
Need your advice on a visual ide part 2
thanks to everyone who responded to my previous thread. from the feedback i think my best plan is to try and code things myself rather than use the gui building of a visual ide, but use the ide's for code completion and file organization. i've used x
-
JDBC thin driver connection problems using cybersafe authentication
Hi i am trying to use jdbc thin driver to connect to oracle 8.1.7 DB using ASO and cybersafe authentication. Question: Does the oracle jdbc thin driver in 8.1.7.0.0 support third-party authentication features supported by Oracle Advanced Security--su