Latest iTunes 10.1.1 for Windows 64-bit NOT recognizing iPhone 4...***?!

Hey All,
My iPhone 4 is not being recognized by my brand new PC laptop - Dell Studio 1558 with Windows 7 (64-bit).
Each time I attempt to synch the iPhone 4 with the PC, I get the same error message below:
"This iPhone cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes."
I've installed and uninstalled and installed and unistalled latest iTunes 10 (64 bit version) and keep getting this error message above.
Surely this can't be an overall iTunes 10 glitch with the iPhone 4?!?! When does next version come out? Apple staff has been unable to help me so I thank anyone in advance who has a solution for this. Happy New Year =)
-josh

I've also got a similar problem. I upgraded yesterday & today I find (mainly with previously purchased tracks) that iTunes only playes about 51sec of a track. The whole track plays when using "Quicktime" but this doesn't help me when I'm trying to put together a playlist.
Can anyone out the help?

Similar Messages

Downloaded latest iTunes 11.1.4 for Windows (64-bit) but crashes on startup with message*

When installing it keeps asking if I have permission for mobile devices. Then when loaded it crashes with error 7 (???)

Try Troubleshooting issues with iTunes for Windows updates.
tt2

Can Not installed latest iTunes 10.5.2 for Windows XP

To System support,
I am having trouble installed latest iTunes 10.5.2 for Windows XP. When I start install the exe file, I got an error message:
“There is problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor.”
Could someone tell me why I can’t install iTunes 10.5.2?
I even fellow the trouble shooting from iTunes page by uninstall the older version of iTunes. Now I can’t even link my iPhone or iPad now. Please advise me on what is missing in my computer for costing this issue. Thanks for all your supports.
My computer inf:
System:
Microsoft Windows XP
Professional
Version 2002
Service Pack 3
Computer:
Intell(R) Core 2 Duo CPU
T7500 @ 2.20GHz
2.19 GHz, 1.50 GB of RAM

“There is problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor.”
Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time?

I can't get the latest version of iTunes 12.0.1 for Windows (64-bit) to work on my laptop.

I can't get the latest version of iTunes 12.0.1 for Windows (64-bit) to work on my laptop. It says it has successfully downloaded and installed, but when I try to connect my new iPhone 6 to iTunes i get an error message 'need to install new software' but i thought i had! Please help me as i have had to connect my phone to someone else's mac and therefor don't have my music etc on my phone HELP! I have had IT support at work trying to figure it out and no one can!

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

ITunes 11.2.2 for Windows x64 will not successfully install. Removed prior iTunes, and still will not install. 10.7 installs just fine, but constantly asks to upgrade to 11.2.2. Any Thoughts?

iTunes 11.2.2 for Windows x64 will not successfully install. Removed prior iTunes, and still will not install. 10.7 installs just fine, but constantly asks to upgrade to 11.2.2. Any Thoughts?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component won't install normally.
If needs be, the Microsoft Program Install and Uninstall Utility (MS Installer "Fixit") may be able to help force through the installation.
tt2

Installed iTunes 10.2.1 for Windows (64-bit), Error 7 Windows 998

Hello
After updating iTunes 10.2.1 for Windows (64-bit)I am getting the dreaded iTunes was not installed correctly, Please reinstall iTunes. With error 7 (Windows error 998) popups.
Tried already all the known uninstall/install/repair suggestions. Tried runnng as administrator or changing permissions. Tried disabling Bonjour Service.
Until now nothing has repaired it.
Is there a way to fix this? Can it be an Adobe update?
Is there a way to get an older version?

I had the same problem. I tried doing a system restore to a day or 2 before i did the update. The restore was successful but the itunes problem remained. After that I went into the control panel, selected itunes and clicked the repair tab.
It now works fine for me. The only other step I took was to copy my itunes folder into another location in case anything went wrong. Once the repair was complete I simply replaced the new empty itunes folder with my previous one.
Hope this is of some help.

I tried to install iTunes 10.6.1 for Windows (64 bit) and it says "A required iTunes component is not installed. Please repair or reinstall iTunes. (-42404). I have tried uninstalling everything and reinstalling and it still does not work.

I tried to install iTunes 10.6.1 for Windows (64 bit) and it says "A required iTunes component is not installed. Please repair or reinstall iTunes. (-42404). I have tried uninstalling everything and reinstalling and it still does not work. I then restored my computer to a week ago and tried to download and install the update and this came up again.

Check out this thread:
https://discussions.apple.com/thread/3677426?start=0&tstart=0

Itunes 12.0.1 for Windows (64-bit) is Unresponsive

I just updated to itunes 12.0.1 for Windows (64-bit) (Running windows 8)
As soon as I start the front screen is loaded but the program is unresponsive.
In task manager it says it's a 32bit program (not sure why it is advertised as 64bit!?)...
I tried the following:
1-Removed Itunes, Restarted, Reinstalled it but that didn't work
2-Removed the SyncServices Folder (as suggested in some forums) but that also didn't work
Any Ideas?

Hi suntrain,
Welcome to the Apple Support Communities!
I understand that iTunes is not responding on launch on your computer running Windows 8. You have already done some great troubleshooting to try and isolate and resolve the situation as well. In this situation I would recommend reading over and working through the troubleshooting steps located in the attached article.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues - Apple Support
Cheers,
Joe

HTTP Server for Windows 64 bit not on the companion CD

Hi,
I cannot find the HTTP Server for Windows 64 bit on the companion CD. Any idea where I can get it from? For the 32bit version the HTTP Server is on the Companion CD.
Thanks in advance,
Florin

If i am correct reason should be : Oracle Application Server 10g will run as a 32-bit application
Following platforms have the same media in either case:
Microsoft Windows 32-bit and EM64T/AMD64
(Not Itanium-64, which is separate and referred to as "Windows 64-bit")
Linux x86 and Linux x86-64
Solaris Sparc 32-bit and Solaris Sparc 64-bit
As the Oracle Application Server 10g will be run as a 32-bit application. See the Installation Guide or readme files for any specific steps on these 64-bit platforms.
Refer the Note.433061.1 - How to Obtain Application Server 10g Media, Patchsets, and Patches

Windows PC suddenly not recognizing iPhone. Recognizes another iPhone just fine. USB works until operating system in PC (XP) loads. Any clues out there?

Windows suddenly not recognizing iPhone, yet recognizes another iPhone fine (sees in iTunes, etc.) USB appears to be fine - passes electrical to iPhone until operating system (XP) boots, and then "disconnects". I've gone through all of Apples suggestions for troubleshooting - including msconfig. Same result - quick double "bong" tone and no connectivity to iTunes. Versions are all up-to-date.
Any suggestions out there?

How did you get the VMWare sync to work? I hate Apple at this point.

ITunes for Windows 8 does not see iPhone and iPad

In my HP Envy notebook, iTunes (last version) does not connect to iPhone and iPad. Note that the PC connects to both. Only iTunes does not. I think this version of iTunes for windows does not use the correct USB driver.

Hi there luigifonti,
You may find the troubleshooting steps in the article below helpful.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
-Griff W.

TS1538 iTunes 10.6.1.7 and Win/Vista Not Recognizing iPhone 4S!!!

I bought my first iPhone which is a 4s two weeks ago, and the latest iTunes did not recognize it, while Win/Vista recognized it on the drop down list and as a camera. The same iTunes was able to detect iPhone 4 which I bought for my family member. I then connected iPhone 4s to iTunes under WinXP, and it worked fine, so I was totally confused. I submitted the question to Apple iTunes Feedback, and did not receive any reply.
I have used iTunes many years with iPod and iTouch, and was happy with it, but this incident changes my perception of Apple completely!
Eventaully, I did more research on the web, and learnt during the iTunes installation, iTunes did not update the device or USB driver for iPhone 4s!!! It was solved, under Win/Vista, by updating the device driver by pointing to the iTunes directory. My conclusion is this has to be a bug of the iTunes installation process.
Very disappointed with Apple's lack of response. I actually planned to switch to use Mac, but this experience or rather Apple's effort to rectify the problem has changed my attitude towards Apple completely. It is a shame! Or is this their tactic to encourage Win users to migrate to Apple Mac???

I too have only recently encountered this problem. I have been able to burn disks before but it keeps making all these weird sounds. It might be a hardware problem but the fact that everything else that uses a disk works I doubt it.

I have a PC Window 7 and I by a iPod nano but can't do the download of iTunes 10.5.2 for windows (64-bit), what can I do? Because I can get to the 99% of the download but after stop.

I need to do the download and install the latest version of iTunes from start working with the iPod nano. I have a Laptop; Toshiba with Windows 7. The Laptop it's 2 years old and have space for the fill. I try to download the iTunes 10.5.2 more them 6 times, when get to the 99% 1 sec. reminding time it stop and don't do nothing more. I tried change the filter level to "Medium", them go to www.apple.com/iTunes/download and Run it again. The same problem shows up. I don't know if I'm doing this steps correct. Till now never connected the iPod nano to the Laptop. Why shell I do? Have it ON or OFF? And why can't I end the download?
I don't know nothing about Mac till now just work with Windows and not for to long. Any kind of help it's well can.
Any one, please. My little one is getting very sad because she can't start using her Xmas present.
Thank you.

Do you have specific problems with Flash that you needed to visit the Adobe help pages?
Make sure that you allow the plugin-container.exe process in the firewall.<br />
See http://kb.mozillazine.org/Plugin-container_and_out-of-process_plugins
There are other things that need attention:
Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
*Next Generation Java Plug-in 1.6.0_17 for Mozilla browsers
Update the [[Java]] plugin to the latest version.
*http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)

Itunes 10.1.1 for Windows 64 bit launching issue

Trying a clean install of itunes on Windows 7 64 bit machine. It downloads and seems to install okay. Launch program and it looks like nothing happens. Check running services and it appears there. Tried uninstalling, removing and re-installing everything per Apple support and same thing. Quicktime launches fine. Installed and running on account with Administrator privileges. Wanted to give this laptop to my daughter all ready to go for Christmas. Any ideas would be really appreciated. TIA

Launch program and it looks like nothing happens. Check running services and it appears there. Tried uninstalling, removing and re-installing everything per Apple support and same thing. Quicktime launches fine.
Excellent info thanks, julie. That's ruled out a bunch of things already.
Checking now on one further common cause of error-message-free itunes launch failures in recent times.
Try (by way of experiment) disabling the BonJour Service.
In your Start Menu, right-click Computer and select "Manage".
Expand "Services & Applications".
Open "Services". (Maximise the window to better see what's going on.)
Right-click the BonJour Service and select "Properties". In the "General" tab, set Start-up type to "Disabled".
Restart the PC, and try launching iTunes again. Does it launch this time?
If iTunes launches with the BonJour Service disabled, by any chance do you have a recent version of IOBit's Advanced SystemCare utility currently installed on the PC? If so, try uninstalling and reinstalling Advanced SystemCare. Can you launch iTunes without having to disable the BonJour Service now?

ITunes 10.6.3 for Windows (64 bit) will not start

When I upgraded to this version of itunes, the computer states that it installed correctly, but the itunes will not start. The following is the error report message:
Problem signature:
Problem Event Name:        BEX
Application Name:        iTunes.exe
Application Version:        10.6.3.25
Application Timestamp:        4fd16377
Fault Module Name:        QuickTime.qts_unloaded
Fault Module Version:        0.0.0.0
Fault Module Timestamp:        4ea5d609
Exception Offset:        68121040
Exception Code:        c0000005
Exception Data:        00000008
OS Version:        6.1.7601.2.1.0.256.48
Locale ID:        1033
Additional Information 1:        0a9e
Additional Information 2:        0a9e372d3b4ad19135b953a78882e789
Additional Information 3:        0a9e
Additional Information 4:        0a9e372d3b4ad19135b953a78882e789
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
Any help is appreciated,
Rick

I've also got a similar problem. I upgraded yesterday & today I find (mainly with previously purchased tracks) that iTunes only playes about 51sec of a track. The whole track plays when using "Quicktime" but this doesn't help me when I'm trying to put together a playlist.
Can anyone out the help?

Latest iTunes 10.1.1 for Windows 64-bit NOT recognizing iPhone 4...***?!

Similar Messages

Maybe you are looking for