Latest iTunes update breaks iTunes Radio

Has anyone tried to use Featured Stations on iTunes Radio? The latest update has broken this on both my iMac and MacBook Pro. Both running news Yosemite and iTunes. I'm able to play NPR Radio, but all else has failed. I've logged out, and logged back in. Restarted and still no iTunes Radio on Featured Stations. I even created my stations and still no sound.

It's working now. Must have been an issue with Apple regarding iTunes radio.

Similar Messages

Since the latest itunes update, my itunes won't recognise my ipod

Since the latest itunes update, my itunes detects my ipod nano (7th generation), but says it can't be identified properly. However, my older ipod nano (4th generation) fine. Does anyone know what this could be? I've re-installed itunes already and followed the troubleshooter.

The later nano may require more power when connected, to operate and charge its battery, compared to the older nano. It's possible that your computer's USB bus may not provide sufficient power, if you have other devices connected at the same time.
As a test, I would shut down (power off) the computer and disconnect all USB devices (including hub), except for standard keyboard and mouse if normally used. Do this to Reset the iPod
http://support.apple.com/kb/HT1320
Start up the computer, run iTunes, and connect the iPod to a direct USB port on the computer. Is there any difference regarding this problem?

ITunes 11.3.1 update breaks iTunes on my mac.

iTunes 11.3.1 update breaks iTunes on my mac. iTunes window will not display following update.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Just did the iTunes update that iTunes said was available now iTunes won't open, keep getting Runtime Error message. R6034 An application has made an attempt to load the C runtime library incorrectly. Please contact the apps support team for more info.

Just did the iTunes update that iTunes said was available, now iTunes won't open. I just keep getting a Runtime Error message.
R6034
An application has made an attempt to load the C runtime library incorrectly. Please contact the apps support team for more info.
Is anyone else having this problem?
I tried to re-install and got the following message: iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 1114)
Does this mean I have now lost everything?

I just had the same error:
R6034
An application has made an attempt to load the C runtime library incorrectly. Please contact the apps support team for more info.
I went to http://support.apple.com/kb/ht1925 and did a complete removal and reinstallation of iTunes. You MUST follow the directions here exactly...it's more than just iTunes that must be removed, and it MUST be done in the order in which the support article says. I followed the exact instructions, and iTunes is back on my machine (no more C runtime error) and you do NOT lose your music...it's all in my library, as it was before.
Good luck!

HT1218 After a recent iTunes update attempt iTunes no longer functions and the airport extreme base station is not accessable on our computer. We still have wifi but cannot access the base station software.

After a recent iTunes update attempt iTunes no longer functions and the airport extreme base station is not accessable on our computer. We still have wifi but cannot access the base station software.

Thanks for the reply. I appreciate the response. I tried that approach this evening and it didn't work for me. (Technically it worked for me, when I was hardwired into my base station, but would not work for me wirelessly, which is my main issue.)
Again, using the approach you recommended works only if I have my ethernet cable attached to the LAN port so my computer is communicating directly to the base station through the hard wire. I am able to scan for my base station and make setting adjustments normally this way too.
As soon as I disconnect from the LAN port and try to go wireless is where I run into problems. The Base Station's wireless network I created is available to choose in the top right corner of the monitor with all of the other available wireless devices/networks -- but the network I created does not have access to the internet. I am also unable to configure my Base Station wirelessly. When my Airport Utility tries to scan for the Base Station and Network, it cannot find any Apple Wireless Device. It's like the Wireless Network in my base station is not sending out a signal.
Is there a way to resolve this issue?

After installing the most recent iTunes update/version iTunes will no longer run on my PC. I receive a window with the Microsoft error code R6034

After installing the most recent iTunes update/version iTunes will no longer run on my PC (Windows 7). I receive multiple error windows with the Microsoft error code R6034. Microsoft's Help site states that this error occurs when a driver attempts to access the C++ library without a "Manifest". I do not know what a manifest is, but apparently any attempt to directly access the C++ library is not permitted. The site instructs the viewer to contact the application developer.

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

The latest Java update breaks some vital applications

The latest Java update breaks some vital applications. I have reverted back to 7u45. But now, every time a java applet is used, the "later", "block", "update" window appears and stops the applet from loading. I must have this older release. Oracle does not throughly test their updates. Note: the apps the update breaks are actually Oracle apps.
I have checked the "do not ask again until next relesse" box every single time. Worthless.
Is there a way to stop Java version checks? I even have the box deselected for check for updates; ignored by OS X. I WANT CONTROL! Stop checking!
Ideas?

We are facing the same issue. We suggested all out customers not to install the updates Java 7u65 or 8u11 until there is a workaround or fix.
The wrong look & feel is causing the following problems:
- Either icons or text can be display on a button. Currently the majority of buttons are displaying an icon. Therefore the workaround is to set the text at least.
- Scroll-bars are displayed within all cells of a table column. The circumstances are not clear when these scroll-bars are displayed.

IMac unable to restart after downloading latest software update (including iTunes 11.2)

My system is a mid-2007 iMac (Intel) with latest software updates always promptly installed (OSX Mavericks, etc) and 320 GB internal HD, 4GB Ram.
Today the software updater informed me that an update to iTunes was available and so I allowed it to download the update and then restart the computer. The restart was not successful - the computer display will show the status window progressing as the update is installed and then nears completion, but will freeze at the apparant point of completion and the restart will not complete. I tried restarting several times and it always hangs up and does not complete.
I then ran the Disc Utilities program - first time I ran it, it identified disc problems with the internal HD and proceeded to repair them. Following that I trried to restartt and it ran into the same difficulties and did not restart. Subsequently I ran disc utilities and it reports the internal HD to be fine. I've also tried several times to boot the computer and restore from my Time Machine backups and it will not complete the restore. I do get to the screens where I can select the volume to restore from, the volume to restore to, and so forth. After these efforts were not successful, I finally tried to re-download OSX and do a clean system restore, it progressed nearly to completion and then aborted the system installation without completing.
Since having this problem I've therefore been unable to use the computer in Mac mode. I had just about concluded that my hard disc must be replaced, when I decided to see if I could restart running Windows (bootcamp), and I was able to do that successfully. The hard disc is therefore not damaged, or at least the partition of the hard disc used by Windows is not damaged.
Is my most likely option to replace the hard disc or is there something I can still do, in order to see if the hard disc can be restored using a saved backup, before I replace it?
I have the further complication of finding that the Apple store will not replace the hard disc for my computer because it is over 5 years old. I can probably locate a shop such as Best Buy locally who can do that, or I can simply purchase an external hard disc and use that as my primary hard disc until I either replace the internal hard disc or simply replace the computer. Since it is a 7 year old iMac, it would not be surprising to have to replace the hard disc after this length of time. I also see that there are instructions available online to explain how to replace the internal hard disc myself, but I'm unsure at this point whether or not I want to do it myself.

Lacking any responses to my initial post above, I will briefly update how I resolved this issue today.
Installed new external hard disc, 1 TB WD My Passport for Mac, and straightforward setup involving first installing current OS X operating system, then system migrator utility to rebuild the same setup as saved in latest Time Machine backup. The whole process was somewhat time consuming due to my internet connection speed and USB data transfer speeds but it went without any issues. The computer now boots up and operates identical in all respects to how it did before the problem occurred.
Regarding the internal HD of my iMac, if I now run Disc Utility to verify the disc, it reports "appears to be OK". However, viewing the disc usage in "About This Mac" window, it displays as entirely empty. Opening it in the finder also shows only a "Apple Hot News.mbox" file and a single .jpeg image, and .nothing else.
Interestingly, the Bootcamp partition of my iMac's internal HD continues to work fine and appears unaffected by the problem. I use bootcamp rarely but still will plan to set up a replacement bootcamp volume on the new hard disc soon, in order to take its place.
That the problem surfaced coincident with the software update may have been nothing more than bad luck? At this point I have no reason to suspect that the softward update had anything to do with the difficulties.

I download latest software update for itunes and iphone. they successfully download, but then a message comes up saying unable to install as file has been corrupted. what is the cause?

I download latest updates for itunes and my iphone, when it comes to installing, it successfully downloads, but then i get a message for iphone software error=1403 file corrupted, and for itunes it downloads, then when i try to install it a message says unable to install software, file maybe corrupted!!

The iTunes update must be downloaded and installed before you try and use it to update the iPhone OS
Download iTunes 10.2.2 from here: http://support.apple.com/kb/DL1103
When it completes it will auto mount the disc image and show you the package installer, don't try and do anything with the file until it gets to this stage.
Once that's installed reboot the Mac, run iTunes, connect your iPhone and let it sync, then hit the update button and let it complete that step by itself (which will require a restart of the iPhone)

Why is the latest windows update making iTunes unusable?

The program constantly freezes and won't let me update my iPods. Am I missing an iTunes update or do I have to wait for Windows to fix this?

If you believe the issue is with a Windows update, why would you ask the question on an Apple forum? Contact Microsoft.
HLPC wrote:
Am I missing an iTunes update?
How could anyone possibly know? You have provided no details like the version of iTunes on your computer.
Did you check to see what version of iTunes is on your computer?

Airport or iTunes Updates Neutered iTune Volume Control ?

Not sure exactly which update did it, but, somewhere along the way when I updated to iTunes 7, the latest AirPort Update 2006-001, and Security Update 2006-005, the volume control in iTunes quit functioning. It used to work with streaming radio audio to my home stereo system. It doesn't appear to function at all. Introduced bug ?

Have you tried unplugging the Airport Express, if that does not work try resetting it
Resetting AirPort Expres

Unable to download iTunes update in iTunes

I get notice in iTunes of an update for iTunes. I click to download new update then box disappears but no dowload happens. I usually have to onto apple to download latest update. Is there way of fixing problem with updater?

Hi..
Use the iforgot link for resetting your Apple ID account here > Apple ID: "This Apple ID has been disabled for security reasons" alert appears

New itunes update, now itunes wont open keeps saying files missing

doiwnloaded new update, now itunes wont open saying files missing. help

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

Itunes updates to itunes 10 then it says itunes cannot open after i restart

Hi, i usually update my itunes with no problems, last week it said itunes update so i clicked to download the update as i usually do, then when i restarted it it said 'unable to open itunes as some files missing' and i had to download itunes again.
Today itunes said again update so i clicked to download it and when i restarted my laptop it says some file missing again!
Can someone tell me why this is? i have never had a problem with itunes in all the years i've used it! i have a new ipod touch that i use with it.
I use windows Vista.
Thanks x

Hi, I have exactly the same problem with the same error message. I tried uninstalling everything to do with itunes and then reinstalling it all, and it worked fine. But then when I upgraded, the same problem occured. So annoying!
I have an ipod nano, can't remember which version and I also use windows vista.
Thanks x

Is there a way to undo the last itunes update? itunes will not now recognise my ipod nano

I recently installed the itunes update to 11.3 and my ipod nano (gen 7) is no longer recognised in itunes. Is there a way to undo the update or is itunes issuing a fix for it. the message board indicate I'm far from alone with this problem!

Hi princecaspian22,
Welcome to the Apple Support Communities!
I understand how frustrating it can be for your device to not be recognized in iTunes. There may be a few steps to take to help isolate the issue and get this resolved. I suggest following the steps in the following article to help you through the process.
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/TS1363
Have a great day,
Joe

Latest iTunes update breaks iTunes Radio

Similar Messages

Maybe you are looking for