Latest iTunes Update Bugs

Hello, I was just wondering if anyone else has encountered bugs with the latest update of iTunes. I just updated my iTunes this past weekend when a pop-up window came up as I opened my iTunes. I believe the new update included something new for Quicktime and stated that it fixed old bugs from the last version and mentioned something about iTunes DJ? Well after installing the updates, my new version of iTunes won't do something I considered very convenient before: it won't play the songs from my shuffle through iTunes. I used to go and listen through the tunes I wanted to take off to make space for new ones but now I can't do that anymore. Has anyone else encountered this? Are updates pointless if everything's working fine for you? Seems like every time I fall for an update, it brings me a new bug. Please advise if you know what's up.

I did notice that when I rip a CD using AAC VBR it does not really use VBR. Example if I set itunes to rip MP3 256 kbps it rips anywhere from 256 kbps to 299 kbps. But if I set itunes to rip AAC itunes plus (which has VBR as a default setting) it stays exactly at 256 kbps. It is the same result when I try 128 kbps with both MP3 and AAC. This problem exists on both my PC using Windows Vista and my Macbook using OSX Leopard.

Similar Messages

  • Latest iTunes update; iPhone sync takes a long, long time

    I have a 64GB iPhone 4S, up to date with latest software.  I have iTunes running on a Toshiba Satellite laptop running Windows Vista 64-bit SP2; running latest update of iTunes.
    I am currently doing my second iPhone sync to change out a bunch of music since the latest iTunes update.  I have tons of records, and I like to switch up the tunes quite a bit.  I love the 64GB iPhone; holds over 500 albums.
    Both, the first time and now this time, the sync is taking forever.  Seriously, as I type this the sync is now past two hours and looks to be about 60% done.
    Prior to this update (both iTunes and phone), the sync took maybe 20 minutes,  Nothing else has changed; same computer/operating system, no bugs or viruses.  The only thing I think it can be is this latest update to iTunes; which, by the way, dumped all my albums when the update was done.  I had to add all the folders again; that took a while and a lot of album covers were lost.  Big pain in the butt, basically.
    I don't know if you Apple people are listening, but this is eroding my confidence in your brand.  Will I spring for a MacBook like I was planning?  Hmmm...

    No solution - just the same problem.
    My wife's 4s (iOS 7.0.2) has been hanging at syncing Contacts on iTunes 11.1 (iMac; Mountain Lion) the past several days. It never gets past "Syncing Contacts".
    Doesn't anyone have any advice. I've hard re-booted her iPhone; re-booted the iMac.
    We don't have this problem with either my iPhone 5 (7.0.2), her 2nd-gen iPad or her old iPot Touch.
    We share the same contacts and calendars across all of these devices and the iMac.

  • TS1372 After the latest iTunes update iTunes no longer sees either of my ipods.  Diagnostics says no ipod connected.  However my laptop, which is running Window 8.1 does see the ipod.

    After the latest iTunes update neither of my iPods are recognized by iTunes, so I am unable to sync.  When I run diagnostics it says no device connected.  My laptop sees my iPod so I know it is connected.  I have tried all of the recommended iTunes fixes and none work.  I tried deleting and reinstalling both an older version and the newest version.  The older version would not reconize my music libray.  Any thouhts?

    I tried deleting and reinstalling both an older version and the newest version.
    Doublechecking. Have you also tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

  • Installed latest itunes update and computer tried to burn a playlist to CD and realized computer no longer recognizes my CD/DVD drive. This is an APPLE Itunes issue. Help!. HPPavillion DV6 64 bit, windows 7

    Installed latest itunes update and computer tried to burn a playlist to CD and realized computer no longer recognizes my CD/DVD drive. After doing some data mining, found out from community this is an long standing APPLE problem- which doesn't get much tech support in terms of fixes. I have an HPPavillion DV6 64 bit, Windows 7 OS . After reading an earlier complaint from 2009 in the support community,  I ran diagnostics from ITunes which gave the following result. Can someone please help? (I'm not enough of a techie to know what I'm doing or how to locate /reinstall CD drivers. I am searching for driver disc but cannot locate.)
    Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
    Hewlett-Packard HP Pavilion dv6 Notebook PC
    iTunes 10.6.3.25
    QuickTime 7.7.2
    FairPlay 1.14.43
    Apple Application Support 2.1.9
    iPod Updater Library 10.0d2
    VoiceOver Kit 1.4.2 (222093/222742)
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 5.2.0.6
    Apple Mobile Device Driver 1.59.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 0043AC7C0368E428
    Current user is not an administrator.
    The current local date and time is 2012-07-24 23:43:08.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    Video Display Information
    ATI Technologies Inc., AMD M880G with ATI Mobility Radeon HD 4250
    **** External Plug-ins Information ****
    No external plug-ins installed.
    iPodService 10.6.3.25 (x64) is currently running.
    iTunesHelper 10.6.3.25 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.

    Doublechecking ... did you have CD/DVD drive tests checked when you ran those diagnostics? (I'm not seeing the CD/DVD test results down the bottom of the results where I'd expect to see them.)
    For example, here's what I get:
    Microsoft Windows 7 x64 Ultimate Edition Service Pack 1 (Build 7601)
    Acer Aspire X3400
    iTunes 10.6.3.25
    QuickTime 7.7.2
    FairPlay 1.14.43
    Apple Application Support 2.1.9
    iPod Updater Library 10.0d2
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 5.2.0.6
    Apple Mobile Device Driver 1.59.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 003CAD7C0A1258F8
    Current user is not an administrator.
    The current local date and time is 2012-07-26 10:42:53.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is disabled.
    HDCP is supported.
    Core Media is not supported. (16008)
    Video Display Information
    ATI Technologies Inc., AMD Radeon HD 6570
    **** External Plug-ins Information ****
    No external plug-ins installed.
    Genius ID: d6a87ba725121aa1240b1ce936c23470
    iPodService 10.6.3.25 (x64) is currently running.
    iTunesHelper 10.6.3.25 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    **** CD/DVD Drive Tests ****
    No drivers in LowerFilters.
    UpperFilters: GEARAspiWDM (2.2.0.1),
    E: ATAPI DVD A  DH16ABSH, Rev YA12
    Data or MP3 CD in drive.
    Found 1 songs on CD, playing time 255:57 on CDROM media.
    Track 1, start time 00:02:00
    Get drive speed succeeded.
    The drive CDR speeds are:   4.
    The drive CDRW speeds are:   4.

  • I have been having a lot of trouble with the latest itunes update and my ipod classic 80Gb i.e. being unable to sync songs, but now i have no files at all on my ipod, it is completely blank when i view it from my computer. I need help, please, anybody.

    As it says above, i have been having a lot f trouble with my ipod classic and the latest itunes update, i was unable to sync songs or anything to it and have tried every conceivable 'fix' i could find. i have run an itunes diagnostic and the results are posted below. a major problem is that when i try and view my ipod through my computer it displays nothing at all on the ipod, no files or anything, this may be the problem but i have no idea how it has happened or how i could resolve it.
    This ipod holds huge sentimental value and i am loathe to buy a new one! If anybody can help it is greatly appreciated, than kyou in advanced.
    Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
    ASUSTeK Computer Inc. K50IJ
    iTunes 11.1.5.5
    QuickTime not available
    FairPlay 2.5.16
    Apple Application Support 3.0.1
    iPod Updater Library 11.1f5
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 7.1.1.3
    Apple Mobile Device Driver 1.64.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 0038B8600B98D1E0
    Current user is not an administrator.
    The current local date and time is 2014-03-21 16:52:39.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Core Media is supported.
    Video Display Information
    Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
    Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
    **** External Plug-ins Information ****
    No external plug-ins installed.
    Genius ID: 2fd81a1f13cf3ff25a8b4f0e8e725116
    **** Device Connectivity Tests ****
    iPodService 11.1.5.5 (x64) is currently running.
    iTunesHelper 11.1.5.5 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) ICH9 Family USB Universal Host Controller - 2934.  Device is working properly.
    Intel(R) ICH9 Family USB Universal Host Controller - 2935.  Device is working properly.
    Intel(R) ICH9 Family USB Universal Host Controller - 2936.  Device is working properly.
    Intel(R) ICH9 Family USB Universal Host Controller - 2937.  Device is working properly.
    Intel(R) ICH9 Family USB Universal Host Controller - 2938.  Device is working properly.
    Intel(R) ICH9 Family USB Universal Host Controller - 2939.  Device is working properly.
    Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293A.  Device is working properly.
    Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293C.  Device is working properly.
    No FireWire (IEEE 1394) Host Controller found.

    Here is what worked for me:
      My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

  • I installed the latest itunes update, 11.4.0.18. Now itunes crashes every time I try to open it.

    I installed the latest itunes update, 11.4.0.18. Now itunes crashes every time I try to open it.

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT as you start iTunes) then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
    You could also try working through
    TS1717: iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    tt2

  • Hi, i'm having trouble with syncing my iPod. (after the latest iTunes-update)

    It's a classic, but I have no idea what generation... but it was bought in early 08, and have 80gb. Anyway, it has been working fine all the time, but by the latest iTunes-update, it has stopped working. (mac) Every time I try to connect it with my computer, iTunes says that "this iPod appears to be destroyed, try to restore" (I'm having iTunes in Norwegian, so not sure if this is the direct translation, but hopefully you'll get the picture) - and I try to do this, again and again, but nothing seems to work. I have tried to turn off the computer, put iPod in disc-mode, let the battery run out, give it a two-week break, and now I'm out of guesses on what to do. But no matter what I do it allways appear to have zero songs on it after I am done syncing, and I allways get the "try to restore"-message when i connect it again.
    It's possible that it's just old age or something, but I really want to try everything first, as it seems to be all right otherways. It also works when I connect it with my friend's  PC, but since she has ****** taste of music () it's not an option. I have a MacBook, also from 2008.
    And just to clearify. I have an iPad2, and an old iPod nano (2006) and both works with my computer/iTunes.

    See:
    iOS: Device not recognized in iTunes for Windows
    I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  • After latest iTunes update I get error message when syncing:

    "iTunes could not sync information to the iPhone "name" because a connection could not be established to the iPhone". Same for my iPad, same for both even after upgrading to IOS6.0. Any ideas?
    I tried to carry out a restore on the iPhone but iTunes cannot back it up.
    Is the latest iTunes broken? or is it just me?
    I am on Windows 7 64 bit, Never had this problem till the latest iTunes update.

    So I am unclear, did you purchase these songs or import them from a cd?
    If you imported them and still have the CD try importing them again and see if they work the delete the others.
    Or if you purchased from itunes re-dowwnload and see if they work. Maybe they are corrupted files and this should resove it.

  • I am trying to download the latest iTunes update.  Keep getting error message stating "The folder path 'My Documents' contains an invalid character".  I can't uninstall iTunes for the same reason.  HELP!

    I am trying to download the latest iTunes update; keep getting error message that says "The folder path 'My Documents' contains an invalid character".  This also happens when I try to uninstall iTunes.  HELP!

    OK, never mind!  I saw another question on the right side that addressed the problem, and it worked perfectly!  Went to Major Geeks' page, downloaded the Windows Installer Cleanup Utility, and was able to reinstall the updated version of iTunes!  This community is super!

  • Can't get the latest itunes update to download on my windows7 laptop. It gives runtime error window then error 7, windows error 114, any ideas

    First thing to say is I'm new at trying to slove my own computer issues, so I may be a little slow. The latest iTunes update will not install on my Windows 7 labtop,   I keep getting a runtime error window with Error 7 and Windows eror 1114. I have run a fix and reload the file with no resuts and can't seem to get it do download manually either, any ideas for this computer challanged person?

    See... Unable to install or open > http://support.apple.com/kb/TS5376
    Also See this User Tip by turingtest2
    https://discussions.apple.com/docs/DOC-6562

  • TS1368 I downloaded the latest ITunes update, 10.6 I think. I can still sync my Ipod, but I can no longer access the Itunes Store.  No error message, it just keeps "accessing" but nothing shows up.  I've restarted my computer twice.

    I downloaded the latest Itunes update, 10.6 I think. I can still sync my Ipod, but now I can't access the Itunes Store.  There's no error message, it just keeps "accessing" but never completes.  How can I fix this?

    Ok... I just tried connecting my iPod directly to a USB port on the computer rather than via the USB hub I was using and everything is fine. Odd, but I'm happy now.
    Thanks,
    Evan

  • HT1926 Installation of latest  itunes update stopped, gave error message re couldn't find MSVCR80.dll. Suggested reinstall. Tried but that generated same message. Now get that message when I try to open itunes. I have Windows XP. Help!

    Installation of latest itunes update stopped, gave error message "couldn't find MSVCR80.dll"  Suggested reinstall. Tried but got same message. Now get same error message when I try to open itunes. Help!

    Hey jeight26,
    When you uninstalled and reinstalled iTunes, did you use this article?
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    If you haven't already done these steps, this section contains information that might help your situation, as the order and manner which you uninstall has an effect on the outcome:
    Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
    iTunes
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support (iTunes 9 or later)
    Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
    Let us know if following that article and uninstalling those components in that order helped the situation.
    Welcome to Apple Support Communities!
    Sincerely,
    Delgadoh

  • Windows 7PC no longer detects iPad 3 after latest itunes update. Why?, Windows 7PC no longer detects iPad 3 after latest itunes update. Why?

    Windows 7PC no longer detects iPad 3 after latest itunes update. Why?,

    iPad not appearing in iTunes
    http://www.apple.com/support/ipad/assistant/itunes/
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/TS1591
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    iTunes for Windows: Device Sync Tests
    http://support.apple.com/kb/HT4235
    IOS: Syncing with iTunes
    http://support.apple.com/kb/HT1386
    Apple - Support - iPad - Syncing
    http://www.apple.com/support/ipad/syncing/
     Cheers, Tom

  • I just downloaded the latest itunes update 11.1 and now I get an error messages saying "The item 'iTunes.exe' that this shortcut refers to has been changed or moved, so this shortcut will no longer work properly."

    I just downloaded the latest itunes update 11.1 for windows 7 and now when I try to open itunes with the shortcut on my desktop I get this error message: "The item 'itunes.exe' that this shortcut refers to has been changed or moved, so this shortcut will no longer work properly."  I can't open itunes at all.  Is there anything I can do or is there a problem with the new update?

    Start > Programs = Firefox
    Does that shortcut work?
    If so, delete the current shortcut that is in the Quick Start tray and drag the one that is in Start > Programs down there.

  • ITunes no longer shows my iPhone after I installed the latest iTunes update.

    I agreed to install the latest iTunes update and went through all the steps including rebooting. My phone then asked if I trusted the computer and I clicked "trust". It asked again and I clicked "trust". iTunes never opened automatically and when I opened iTunes, I saw that my iPhone5 was not listed; therefore, I can no longer sync. Then I rebooted my (Windows 7) computer again and experienced the same problems. I moved my phone to a different USB port but experienced the same problems.

    I have an AT&T Uverse email account that keeps saying I have an "incorrect user name or password."
    Perhapse it's the same issue since the Uverse e-mail is through Yahoo.

Maybe you are looking for

  • Question about dual-monitor setup - advanced dock + PCIe card

    I just got a Z60t at work. I had been using a dual monitor setup, but it doesn't look like my current config is going to fly w/ the new machine. Anyway, here's what I've got: Primary monitor: Acer AL2416W (1920x1200 DVI) Secondary monitor: Dell 1901F

  • Display color array then 1 second later display same array with color change

    Hi there, I'm new to LabVIEW and this is my first post. I'm using LabVIEW 9.0.1 Please have a look at this simple program attached below; when I've worked out this part of the program, it will be the starting up sequence of a game the lights need to

  • JTable Renderer

    I am trying to develop an application that allows users to enter in scores into a table. How can I access a particular row/cell in a table and add it to another row/cell. Is it possible to add a JTextfield to a Row/Cell??? Hope you can understand wha

  • Add text and metadata to slides

    This question was posted in response to the following article: http://help.adobe.com/en_US/lightroom/using/WS31E7B057-6EC7-4c10-93C2-9C0035E8F21C.html

  • C++ samples from the SMP

    Hi all, I have downloaded the c++ examples from the SMP.  I have compiled it successfully but when I go to run in debug I get the following output. Loaded 'C:\WINNT\system32\ntdll.dll', no matching symbolic information found. Loaded symbols for 'C:\W