Latest iTunes version problems,

Dear All
I was having problems downloading the latest version of iTunes, then after getting advice here I  updated using a .dmg installer downloaded from the Apple Website, but when I try to open it I get the message: 'no mountable file systems' . What can I do now ? Can anyone assist me with this problem please?
Thankyou
Veedeekay

I've solved my problem.

Similar Messages

  • While installing the latest iTunes version I get the following msg:"Service Apple Mobile Device failed to start.Verify that you have sufficient privileges to start system services. I already tried it from the installer Running it as Administrator

    While installing the latest iTunes version I get the following msg:"Service Apple Mobile Device failed to start.Verify that you have sufficient privileges to start system services. I already tried it from the installer Running it as Administrator and still get the same message.  I click "ignore" and finish the installation but when I try to open it I get this "Runtime Error! R6034 An application has made an attempt to load the C runtime library incorrectly."  I already uninstalled iTunes and all other applications involved and re-installed itunes from the itunes site and the problem persists. Please help!

    Solving MSVCR80 issue and Windows iTunes install issues.

  • After installing win 8.1 and the latest itunes version iTunes does no longer detect my iPhone.

    After installing win 8.1 and the latest itunes version iTunes does no longer detect my iPhone. On my iPhone I now suddenly get the question: Do you trust this computer (after connecting to the usb port)

    Try this!
    I had the same problem as you an it worked for me.
    http://support.apple.com/kb/HT1923

  • How can I eliminate error in printing a cd jewel case cover in latest ITunes version?

    How can I eliminate the printing error in Itunes when attempting to print a cd jewel case cover?  I'm using the latest iTunes version. 

    I finally solved this problem after toiling with it for a couple of days.  Solution:  Once you have  burned your CD you must go back into iTunes to your music/playlists and select the playlist you just burned and click file; print and you will  get the mosaics that we have been accustomed to.  I was on hold with  Apple Support when I found this myself.  Yes......!!! Problem solved..for me anyway.  Good luck!
    Scott

  • Iphone 4 sync issue -  My iTunes is not able to sync the iPhone 4. I'm using windows 7 32bit. At the first step it gets stuck refelcting backing up the phone then nothing happens for ages. I'm using the latest iTUnes version, does anyone have similar prob

      My iTunes is not able to sync the iPhone 4. I'm using windows 7 32bit. At the first step it gets stuck refelcting backing up the phone then nothing happens for ages. I'm using the latest iTUnes version, does anyone have similar prob??? There are no error codes which appear and the iTUNES just gets hanged, is there a solution?

    Remove the song in question from the sync list and see if the rectifies the problem.
    If it does, then iTunes believes the song no longer exists on your drive and that will need to be corrected.

  • Hi there, got 3 issues at once.... 1) can't download the latest itune version (it simply stops, not even an error message) 2) can't access the itune store and in order to fix this i need the latest version 3) one of my ipods isn't recognised by itune

    Hi there, got 3 issues at once....
    1) can't download the latest itune version onto my PC (it simply stops, not even an error message)
    2) can't access the itune store and in order to fix this i need the latest version - catch 22!
    3) one of my ipods isn't recognised by itune, nit sure if because of the earlier problems?
    .... thanks
    S.

    Hello SAB7700,
    This first article can help get iTunes successfully downloaded and updated, which should restore access to the iTunes Store.
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    Once iTunes is successfully updated, the following articles provides steps that can help get your iPod working in iTunes again and the iTunes Store functioning, should the update not resolve these issues
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/TS1369
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    Cheers,
    Allen

  • Just upgraded latest Itunes version & it doesn"t Sync

    Just upgraded latest Itunes version & it doesn"t Sync  I tried reinstalling Itunes with the virus checker off. Also, I used cables instead of wifi but my ipad & Iphone still don't sync.  Any ideas  Thank You

    Hi am33m,
    Sounds like iTunes Match hasn't sync'd the songs properly. Am I correct that on iOS devices the songs appear greyed out? I've had this problem as well recently. You could try going back to the computer you added the songs on, selecting them from your iTunes library and deleting them but telling iTunes to keep the files.
    I did have some luck following the steps at https://discussions.apple.com/message/18597236#18597236 however that was short lived and stopped being effective shortly after. You may have more success.
    1. List all your songs in your library and right-click the column headers to show iCloud Status
    2. Sort by this column and look for all of the tracks at Waiting Status
    3. Select all of the tracks at Waiting Status, right click and delete them, click Delete Items on the first prompt as shown below (This won't delete your music from your computer):
    4. IMPORTANT: At the second prompt that appears after you click Delete Items select Keep Files
    5. Select Add to Library from the File menu and navigate to your iTunes folder in the Music under your Home folder.
    Leave iTunes to rebuild your library (it might take a while if you have a lot of tracks that were at waiting status). Once it is complete, update iTunes Match once it's finished and it should upload the tracks
    Following that process should rebuild the song information for those tracks in your iTunes library and may help iTunes Match sync up properly. If it doesn't let me know as there are some people including myself that haven't had much luck lately getting past this issue.

  • I installed the latest iTunes version but it didn't worked

    I installed the latest iTunes version to my newly formatted pc(windows) and then connect my iPad but it didn't recognized and didn't worked?

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode

  • What is feedback on latest iTunes version?

    what is the current feedback on the latest iTunes version?

    I updated yesterday, synced my iPhone afterwards, and this morning found one oddity which I just sat down to explore. I have two smart lists - within 2 weeks and within 2 months which contain music I've added within 2 weeks and within 2 months. The former is just fine. The latter however appears to contain every song on my iPhone.
    My first stab at fixing this was to delete the playlist from my iPhone, sync, and then add it back. That didn't work so now I'm getting ready to remake the playlist in iTunes and then sync it. Other than that, which may not be related to the new iTunes at all, I'm happy and see no problems.

  • Can't open ITunes on Windows 7 since latest ITunes version 11

    Can't open ITunes on Windows 7 since latest ITunes version 11  Help!!!

    Hi Nancy,
    Thanks for visiting Apple Support Communities.
    If iTunes does not open on your PC, try the troubleshooting steps in this article:
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/ts1717
    Best Regards,
    Jeremy

  • I tried to install latest iTunes version. However I am getting error message that "Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services".

    I have Windows XP system. I tried to install latest iTunes version. However I am getting error message that "Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services". I have all the previlages on my laptop. Please help.

    Solving MSVCR80 issue and Windows iTunes install issues.

  • HT203167 I have just downloaded the latest itunes version (11.0.1). All my data cannot now be located, though the library is showing all the correct content.The data is stored on an external hard drive. How do I tell the library where to find it's data?

    I have just downloaded the latest itunes version (11.0.1). All my data cannot now be located, though the library is showing all the correct content.The data is stored on an external hard drive. How do I tell the library where to find it's data?

    The iTunes application should be installed on the system drive. You may need to repair iTunes to fix that error regarding a missing .exe.
    To organize your library properly see Make a split library portable.
    If you don't have a working version of the library that can be transformed into a portable shape I have tools and techniques that can repair the broken links.
    tt2

  • HT1926 I just tried to update to latest iTunes version and received an error 7 (Windows error 1114) that "iTunes was not installed correctly. Please reinstall iTunes." How so I go about this without losing my library contents (which are not backed up on c

    I just tried to install latest iTunes version and install failed. A pop-up stated "iTunes was not installed correctly. Please reinstall iTunes. ERROR 7 (Windows error 1114)." I have a decent-sized iTunes library that is not backed-up to the cloud. How can I either get back to the previous iTunes version that was functioning OR install a new version without losing the Library?

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • HT1923 I downloaded the latest iTunes version and now get the following error message: "This copy of iTunes is corrupted or is not installed correctly. Please re-install iTunes." Can anyone provide suggestions on what I should do next?

    I downloaded the latest iTunes version and now get the following error message: "This copy of iTunes is corrupted or is not installed correctly. Please re-install iTunes." Can anyone provide suggestions on what I should do next?

    Let's try a repair install of iTunes first.
    Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", click "Change" and then click "Repair".
    Can you launch your iTunes now?

  • TS1717 While downloading the latest iTunes version, my computer turned off. When I opened iTunes, it says that "The file "iTunes Library.itl"  cannot be read  because it was created by a newer version of iTunes" Help please :(

    While downloading the latest iTunes version, my computer turned off. When I opened iTunes, it says that "The file "iTunes Library.itl"  cannot be read  because it was created by a newer version of iTunes" Help please

    That message is usually a sign that you tried to roll back to an earlier build of iTunes, but occasionally I've seen it connected to a new upgrade. This technique should fix things.
    Empty/corrupt library after upgrade/crash
    Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
    See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
    When you get it all working make a backup!
    tt2

Maybe you are looking for

  • Info on SAP JRA data buffering

    Hello, I'd need help on data buffering used with JRA remote function calls. This is what is written in the documentation. ●      DaysRetention The number of days the system keeps the data buffer entry ●      MaxRetryCount The maximum number of times

  • Back ground job scheduling(urgent)

    Hi all,   can anybody will help me ,regarding the step by step procedure to schedule the background job. i have to do back ground job scheduling for one program so that in that specified time my report will execute? plz suggest. ur idea will be highl

  • Rule based classification errors in creating CLASSIFIER.THIS help required

    package body "STARDOC".classifier as procedure this is v_document blob; v_item number; v_doc number; begin for doc in (select document_id, content from documents) loop v_document :=doc.content; v_item:=0; v_doc:=doc.document_id; for c in (select cate

  • Adding links to an image

    I have a large image (map) to which I would like to add links (points of interest). If... my image was on a web page I can see where this would be easy however... I would like my map to open in a seperate browser window as a behavior (on click). Can

  • After upgrading to iTunes 11.0.1.12 from iTunes 10, my playlists have disappeared.

    After upgrading to iTunes 11.0.1.12 from iTunes 10, my playlists have disappeared. Any ideas how I can get them back? They are still on my iPhone though, even after a sync.